Effect of F- ions on physical and spectroscopic properties of Yb3+-doped TeO2-based glasses

The effects of F- ions on physical and spectroscopic properties of the Yb3+ in tellurite glass system are investigated. The results show that the glass system takes on good thermal stability with the content of ZnF2 lower than 15 mol%, both the emission cross-section and the fluorescence lifetime of Yb3+ ions increase evidently which indicate that such oxyfluoride tellurite glass system is a promising laser host matrix for high power generation. FT-IR spectra were used to analyze the effect of F- ions on the structure of tellurite glasses and OH- groups in this glass system. Analysis demonstrates that addition of fluoride decreases the symmetry of the structure of tellurite glasses which increases the emission cross-section and removes the OH- groups, and which improves the measured fluorescence lifetime of Yb3+ ions. (c) 2004 Elsevier B.V. All rights reserved.

Effect of water content in sol on optical properties of hybrid sol-gel derived TiO2/SiO2/ormosil film

Sol-gel derived TiO2/SiO2/ormosil hybrid planar waveguides have been deposited on soda-lime glass slides and silicon substrates, films were heat treated at 150 degreesC for 2 h or dried at room temperature. Different amounts of water were added to sols to study their impacts on microstructures and optical properties of films. The samples were characterized by m-line spectroscopy, Fourier transform infrared spectroscopy (FT-IR), UV/VIS/NIR spectrophotometer (UV-vis), atomic force microscopy (AFM), thermal analysis instrument and scattering-detection method. The refractive index was found to have the largest value at the molar ratio H2O/OR = 1 in sol (OR means -OCH3, -OC2H5 and -OC4H9 in the sol), whereas the thickest film appears at H2O/OR = 1/2. The rms surface roughness of all the films is lower than 1.1 nm, and increases with the increase of water content in sol. Higher water content leads to higher attenuation of film. (C) 2004 Elsevier B.V. All rights reserved.

Effect of F- ions on spectroscopic properties of Yb3+-doped zinc-tellurite glasses

this paper is retracted

Linking transformational leadership and organizational trust: has organizational commitment a mediating effect on it?

[EN] The main goal of this study is to analyze how organizational commitment has a mediating effect on the relation between transformational leadership and organizational trust. Therefore we developed an organization analysis based on a survey that was used to collect primary data from a sample of 58 employees. We obtained a 71% response rate and these data were analyzed using quantitative methodological techniques and linear regression. The research was conducted at the Serralves Foundation (Porto, Portugal) to empirically test the proposed research model and its hypotheses. The empirical results confirm that transformational leadership positively enhances organizational trust. However, transformational leadership and organizational trust are not significantly influenced by organizational commitment, thus not having a mediating effect on this relationship. Such results assume particular relevance because they become a basis for comparative studies in similar organizations. This study brings some theoretical contributions to the literature by analyzing the mediating effect of organizational commitment on the relation between transformational leadership and organizational trust in cultural organizations and has also some practical management implications, as it draws attention to the importance of a set of practices, job satisfaction oriented, which can effectively lead to organizational commitment intervention in the relationship between transformational leadership and organizational trust.

High temperature annealing effect on structure, optical property and laser-induced damage threshold of Ta2O5 films

Ta2O5 films were deposited by conventional electron beam evaporation method and then annealed in air at different temperature from 873 to 1273 K. It was found that the film structure changed from amorphous phase to hexagonal phase when annealed at 1073 K, then transformed to orthorhombic phase after annealed at 1273 K. The transmittance was improved after annealed at 873 K, and it decreased as the annealing temperature increased further. The total integrated scattering (TIS) tests and AFM results showed that both scattering and root mean square (RMS) roughness of films increased with the annealing temperature increasing. X-ray photoelectron spectroscopy (XPS) analysis showed that the film obtained better stoichiometry and the O/Ta ratio increased to 2.50 after annealing. It was found that the laser-induced damage threshold (LIDT) increased to the maximum when annealed at 873 K, while it decreased when the annealing temperature increased further. Detailed damaged models dominated by different parameters during annealing were discussed. (C) 2008 Elsevier B. V. All rights reserved.

Energy retrofits in social housing. Analysis of its thermal behaviour.

468 p.

The effect of shape on the adhesion of fibrillar surfaces.

Experimental data have demonstrated that mushroom-shaped fibrils adhere much better to smooth substrates than punch-shaped fibrils. We present a model that suggests that detachment processes for such fibrils are controlled by defects in the contact area that are confined to its outer edge. Stress analysis of the adhered fibril, carried out for both punch and mushroom shapes with and without friction, suggests that defects near the edge of the adhesion area are much more damaging to the pull-off strength in the case of the punch than for the mushroom. The simulations show that the punch has a higher driving force for extension of small edge defects compared with the mushroom adhesion. The ratio of the pull-off force for the mushroom to that of the punch can be predicted from these simulations to be much greater than 20 in the friction-free case, similar to the experimental value. In the case of sticking friction, a ratio of 14 can be deduced. Our analysis also offers a possible explanation for the evolution of asymmetric mushroom shapes (spatulae) in the adhesion organ of geckos.

Wadge Bank trawl fishery studies. Pt. 1. The effect of the 1928 to 1935 commercial trawling on the demersal stock

The demersal fish stock of Wadge Bank is one of the important fish resources for both Sri Lanka and India. Sivalingam and Medcof (1957) have given an account of its history, general features and relative productivity. According to records the total fishing effort on the bank had been fluctuating and very recently the number of boats operating on the bank has suddenly increased, and there is a possibility that still more will begin operating on the bank in the near future (Mendis, 1965). The increased fishing effort with the possibility of still further increase calls for proper management practices by those concerned, in order to obtain the maximum sustained yield from the demersal stock. For this purpose a detailed study of the past performance of the fishery is essential. With this in view all records of commercial operations up to 1960 are being analysed by the present author and are to be published in a series. This is the first paper in the series and gives a detailed analysis of the first commercial trawling operations from 1928 to 1935. Since there had been a major break of about 10 years between this and the present fishery this data is being analysed separately.

Secondary flow near an undulatory surface induced by wall blocking effect

Prandtl's secondary mean motions of the second kind near an undulating surface were explained in terms of turbulent blocking effect and kinematic boundary conditions at the surface, and its order of magnitude was estimated. Isotropic turbulence is distorted by the undulating surface of wavelength λ and amplitude h with a low slope, so that h « λ. The prime mechanism for generating the mean flow is that the far-field Isotropic turbulence is distorted by the non-local blocking effect of the surface to become anisotropic axisymmetric turbulence near the surface with principal axis that is not aligned with the local curvature of the undulation. Then the local analysis can be applied and the mechanism is similar to the mean flow generation mechanism for homogeneous axisymmetric turbulence over a planer surface, i.e. gradients of the Reynolds stress caused by the turbulent blocking effect generate the mean motions. The results from this simple analysis are consistent with previous exact analysis in which the effects of curvature are strictly taken into account. The results also qualitatively agree with flow visualization over an undulating surface in a mixing-box.

Investigation of extinction in unsteady flames in turbulent combustion by 2D-LIF of OH radials and flamelet analysis

An experimental and theoretical investigation of premixed turbulent combustion in an engine simulator is presented. The distribution of hydroxyl radicals formed in the combustion of propane/air mixtures was visualized by 2D-LIF and used to monitor the progress of the combustion process. For stoichiometric mixtures, images showed a continuous wrinkled flame front, while in lean (λ=1.5) mixtures, local flame extinction was observed as discontinuities in the reaction zone. A bright active reaction zone was still observed in flame inlets and closed concave structures. The effects of self-absorption and of collisional quenching on the fluorescence signal are considered and appear to have only a minor net influence on the shape and width of the flame front. The images are evaluated and interpreted in terms of the Lewis number effect and the laminar flamelet model. Analysis was performed by determining the contour lines of the images (specifically, the ratios of average maximum to equilibrium OH concentration) and comparing with corresponding ratios from unstrained flame simulations. The results show that although the degree of turbulence is not high enough for straining effects to be important, flamelet curvature does play a significant role in the combustion of lean mixtures; this is manifested by a mean effective flame velocity that is less than the laminar burning velocity. © 1991 Combustion Institute.

Analysis of in-cylinder hydrocarbons in a multi-cylinder gasoline HCCI engine using gas chromatography

Gasoline Homogeneous Charge Compression Ignition (HCCI) combustion has been studied widely in the past decade. However, in HCCI engines using negative valve overlap (NVO), there is still uncertainty as to whether the effect of pilot injection during NVO on the start of combustion is primarily due to heat release of the pilot fuel during NVO or whether it is due to pilot fuel reformation. This paper presents data taken on a 4-cylinder gasoline direct injection, spark ignition/HCCI engine with a dual cam system, capable of recompressing residual gas. Engine in-cylinder samples are extracted at various points during the engine cycle through a high-speed sampling system and directly analysed with a gas chromatograph and flame ionisation detector. Engine parameter sweeps are performed for different pilot injection timings and quantities at a medium load point. Results show that for lean engine running conditions, earlier pilot injection timing leads to partial oxidation of the injected pilot fuel during NVO, while the fraction of light hydrocarbons remains constant for all parameter variations investigated. The same applies for a variation in pilot fuel amount. Thus there is evidence that in lean conditions, pilot injection-related NVO effects are dominated by heat release rather than fuel reformation. © 2009 SAE International.

Comparative economic analysis of pond fish production in Mymensingh and Jessore Districts, Bangladesh

The study was conducted to determine the cost, return and relative profitability of pond fish production of Mymensingh and Jessore districts. A total of 75 ponds were selected on the basis of purposive random sampling technique from 7 villages under 2 Upazila (Trishal and Gouripur) of Mymensingh districts and 8 villages under 4 Upazila (Monimmpur, Jhikorgacha, Chowgacha and Sadar) of Jessore district. It was found that per hectare per year gross cost of pond fish production in Mymensingh and Jessore were Tk 333457.75 and Tk 54327.74, while gross return were Tk 434131.16 and Tk. 96640.00 and net return were Tk 100673.41 and Tk. 42312.26, respectively. The findings of this study revealed that the pond fish production in Jessore district was more profitable than that of Mymensingh district. Cobb-Douglas production function was applied to realize the specific effect of the factors on pond fish production. Out of six variables included in the function three variables had positive impact on return from pond fish production, in Mymensingh district but five variables had positive impact on return from pond fish production in Jessore district

Effect of low cost feed on the production of walking catfish, Clarias batrachus in farmer's ponds

A feeding trial was conducted for six months in farmer's ponds to assess the performance of BFRI formulated catfish feed on the growth and survival of Clarias batrachus (L.). Nine interested farmers and their ponds (size range: 10-15 dec) in the Barera union of Mymensingh Sadar were selected. The ponds were divided into 3 treatments each with 3 replications. Among the three treatment diets, two diets - traditional (F1) and BFRI formulated (F3) were prepared by using low cost agro-based locally available ingredients and the commercial diets was Saudi-Bangla Grower-1 (F2). The diets were designed as F1, F2 and F3 for traditional (20.40% protein), Commercial (31% protein) and BFRI formulated (30.44% protein) diets respectively. The fingerlings of catfish (7.3 g) were collected from local fish vendors and stocked at the rate of 100/dec. Feeding rates were adjusted by weight after fortnightly sampling of fish. Feeding rate were 10 and 8% of the total body weight respectively for 1st, 2nd month and 5% for the rest of the experimental period. The range of some selected water quality parameters were as follows: dissolved oxygen 4.0 - 7.4 mg/l, temperature 24.0°- 33.9°C, pH 6.8 - 8.00, and transparency 17.0 - 32.00 cm. Which showed suitability of the ponds for rearing fish. At the end of the experiment, significantly highest gain (p<0.05) in weight (1210.96% ±87) and lowest gain in weight (865.25% ±90) were observed in the group of fish fed on diets F3 and F1 respectively. However, no significant differences in growth (p>0.05) was observed in fish fed on commercial diet (F2) and BFRI formulated diet (F3). The FCR value ranged between 2.00 and 2.80 with the traditional diet (F1) showing significantly lower FCR. The total production of fish ranged between 1398.08 and 2145.34 kg/ha with F3 diet resulting in the highest production and net profit. A simple economic analysis showed that fish fed with BFRI formulated (F3) diet resulted in the highest net profit in farmer's pond.

The effect of increase in the number of fishing trips on the economic efficiency of 9.82 m and 11 m fishing trawlers along Kerala coast

Cost-benefit analysis of a 9.82 m and 11 m fishing trawlers based on the number of fishing trips is presented. The number of fishing trips per year determines the profit and loss of the trawler. With the increase in the number of fishing trips, the profit also increase for both the sizes of trawlers. The minimum quantity of prawn and fish to be landed for 0-20% profit for varying number of fishing trips are worked out. The break-even for 9.82 and 11m trawlers was observed to be 185 and 210 fishing trips respectively during 1980-81.

Stabilizing effect of surrounding gas flow on a plane liquid sheet

The stability of a plane liquid sheet is studied experimentally and theoretically, with an emphasis on the effect of the surrounding gas. Co-blowing with a gas velocity of the same order of magnitude as the liquid velocity is studied, in order to quantify its effect on the stability of the sheet. Experimental results are obtained for a water sheet in air at Reynolds number Rel = 3000 and Weber number W e = 300, based on the half-thickness of the sheet at the inlet, water mean velocity at the inlet, the surface tension between water and air and water density and viscosity. The sheet is excited with different frequencies at the inlet and the growth of the waves in the streamwise direction is measured. The growth rate curves of the disturbances for all air flow velocities under study are found to be within 20 % of the values obtained from a local spatial stability analysis, where water and air viscosities are taken into account, while previous results from literature assuming inviscid air overpredict the most unstable wavelength with a factor 3 and the growth rate with a factor 2. The effect of the air flow on the stability of the sheet is scrutinized numerically and it is concluded that the predicted disturbance growth scales with (i) the absolute velocity difference between water and air (inviscid effect) and (ii) the square root of the shear from air on the water surface (viscous effect).