RELATIONSHIP BETWEEN PHYSICAL AND CHEMICAL PROPERTIES OF STRAIGHT AND RECOVERED ASPHALT BINDERS FROM ONTARIO

Thermal and fatigue cracking are the major pavement distresses that contribute to a drastic reduction of the pavement’s service life and performance in Ontario. Chemical oxidation and hardening of asphalt binders deteriorates its physical properties since physical properties of asphalts depend on its chemical composition. This thesis is aimed to establish a relationship between physical and chemical properties of asphalt binders. A secondary objective is to show the strong correlation between CTOD and temperature. All recovered and straight Ministry of Transportation of Ontario (MTO) samples were investigated using conventional Superpave® test method dynamic shear rheometer (DSR) as well as improved MTO test methods such as extended bending beam rheometer (eBBR) and double-edge-notched tension (DENT) test. DENT test was conducted for all Ontario contract samples at three different temperatures based on their performance grade after three hours of thermal conditioning and compared the results in terms of essential work of fracture, plastic work of fracture and CTOD at different temperatures. Good correlation exists between CTOD and temperature according to the DENT data. X-ray fluorescence (XRF) analysis was conducted to detect the presence of heavy metals such as zinc and molybdenum believed to have originated from waste engine oil. Fourier transform infra-red spectroscopy (FTIR) was performed to determine the abundance of functional groups such as carbonyl, sulfoxides, polyisobutylene, etc. XRF and FTIR analysis confirmed that most of the samples contain waste engine oil and/or oxidized residues, which is believed to be a root cause of premature pavement failures.

Fatty acids composition of Chylomicron remnants like particles influences their uptake and induction of lipid accumulation in macrophages.

The influence of the fatty acid composition of chylomicron remnant-like particles (CRLPs) on their uptake and induction of lipid accumulation in macrophages was studied. CRLPs containing triacylglycerol enriched in saturated, monounsaturated, n−6 or n−3 polyunsaturated fatty acids derived from palm, olive, corn or fish oil, respectively, and macrophages derived from the human monocyte cell line THP-1 were used. Lipid accumulation (triacylglycerol and cholesterol) in the cells was measured after incubation with CRLPs for 5, 24 and 48 h, and uptake over 24 h was determined using CRLPs radiolabelled with [3H]triolein. Total lipid accumulation in the macrophages was significantly greater with palm CRLPs than with the other three types of particle. This was mainly due to increased triacylglycerol concentrations, whereas changes in cholesterol concentrations did not reach significance. There were no significant differences in lipid accumulation after incubation with olive, corn or fish CRLPs. Palm and olive CRLPs were taken up by the cells at a similar rate, which was considerably faster than that observed with corn and fish CRLPs. These findings demonstrate that CRLPs enriched in saturated or monounsaturated fatty acids are taken up more rapidly by macrophages than those enriched in n−6 or n−3 polunsaturated fatty acids, and that the faster uptake rate results in greater lipid accumulation in the case of saturated fatty acid-rich particles, but not monounsaturated fatty acid-rich particles. Thus, dietary saturated fatty acids carried in chylomicron remnants may enhance their propensity to induce macrophage foam cell formation.

Distribution, occurrence and biotoxin composition of the main shellfish toxin producing microalgae within European waters: A comparison of methods of analysis.

Harmful algal blooms (HABs) are a natural global phenomena emerging in severity and extent. Incidents have many economic, ecological and human health impacts. Monitoring and providing early warning of toxic HABs are critical for protecting public health. Current monitoring programmes include measuring the number of toxic phytoplankton cells in the water and biotoxin levels in shellfish tissue. As these efforts are demanding and labour intensive, methods which improve the efficiency are essential. This study compares the utilisation of a multitoxin surface plasmon resonance (multitoxin SPR) biosensor with enzyme-linked immunosorbent assay (ELISA) and analytical methods such as high performance liquid chromatography with fluorescence detection (HPLC-FLD) and liquid chromatography–tandem mass spectrometry (LC–MS/MS) for toxic HAB monitoring efforts in Europe. Seawater samples (n = 256) from European waters, collected 2009–2011, were analysed for biotoxins: saxitoxin and analogues, okadaic acid and dinophysistoxins 1/2 (DTX1/DTX2) and domoic acid responsible for paralytic shellfish poisoning (PSP), diarrheic shellfish poisoning (DSP) and amnesic shellfish poisoning (ASP), respectively. Biotoxins were detected mainly in samples from Spain and Ireland. France and Norway appeared to have the lowest number of toxic samples. Both the multitoxin SPR biosensor and the RNA microarray were more sensitive at detecting toxic HABs than standard light microscopy phytoplankton monitoring. Correlations between each of the detection methods were performed with the overall agreement, based on statistical 2 × 2 comparison tables, between each testing platform ranging between 32% and 74% for all three toxin families illustrating that one individual testing method may not be an ideal solution. An efficient early warning monitoring system for the detection of toxic HABs could therefore be achieved by combining both the multitoxin SPR biosensor and RNA microarray.

Distribution, occurrence and biotoxin composition of the main shellfish toxin producing microalgae within European waters: A comparison of methods of analysis.

Harmful algal blooms (HABs) are a natural global phenomena emerging in severity and extent. Incidents have many economic, ecological and human health impacts. Monitoring and providing early warning of toxic HABs are critical for protecting public health. Current monitoring programmes include measuring the number of toxic phytoplankton cells in the water and biotoxin levels in shellfish tissue. As these efforts are demanding and labour intensive, methods which improve the efficiency are essential. This study compares the utilisation of a multitoxin surface plasmon resonance (multitoxin SPR) biosensor with enzyme-linked immunosorbent assay (ELISA) and analytical methods such as high performance liquid chromatography with fluorescence detection (HPLC-FLD) and liquid chromatography–tandem mass spectrometry (LC–MS/MS) for toxic HAB monitoring efforts in Europe. Seawater samples (n = 256) from European waters, collected 2009–2011, were analysed for biotoxins: saxitoxin and analogues, okadaic acid and dinophysistoxins 1/2 (DTX1/DTX2) and domoic acid responsible for paralytic shellfish poisoning (PSP), diarrheic shellfish poisoning (DSP) and amnesic shellfish poisoning (ASP), respectively. Biotoxins were detected mainly in samples from Spain and Ireland. France and Norway appeared to have the lowest number of toxic samples. Both the multitoxin SPR biosensor and the RNA microarray were more sensitive at detecting toxic HABs than standard light microscopy phytoplankton monitoring. Correlations between each of the detection methods were performed with the overall agreement, based on statistical 2 × 2 comparison tables, between each testing platform ranging between 32% and 74% for all three toxin families illustrating that one individual testing method may not be an ideal solution. An efficient early warning monitoring system for the detection of toxic HABs could therefore be achieved by combining both the multitoxin SPR biosensor and RNA microarray.

Essential scientific mapping of the value chain of thermochemical converted second-generation bio-fuels

As the largest contributor to renewable energy, biomass (especially lignocellulosic biomass) has significant potential to address atmospheric emission and energy shortage issues. The bio-fuels derived from lignocellulosic biomass are popularly referred to as second-generation bio-fuels. To date, several thermochemical conversion pathways for the production of second-generation bio-fuels have shown commercial promise; however, most of these remain at various pre-commercial stages. In view of their imminent commercialization, it is important to conduct a profound and comprehensive comparison of these production techniques. Accordingly, the scope of this review is to fill this essential knowledge gap by mapping the entire value chain of second-generation bio-fuels, from technical, economic, and environmental perspectives. This value chain covers i) the thermochemical technologies used to convert solid biomass feedstock into easier-to-handle intermediates, such as bio-oil, syngas, methanol, and Fischer-Tropsch fuel; and ii) the upgrading technologies used to convert intermediates into end products, including diesel, gasoline, renewable jet fuels, hydrogen, char, olefins, and oxygenated compounds. This review also provides an economic and commercial assessment of these technologies, with the aim of identifying the most adaptable technology for the production of bio-fuels, fuel additives, and bio-chemicals. A detailed mapping of the carbon footprints of the various thermochemical routes to second-generation bio-fuels is also carried out. The review concludes by identifying key challenges and future trends for second-generation petroleum substitute bio-fuels.

Physico-geochemical and mineral composition of neem tree soils and relation to organic properties

The Neem tree, the oil of which has a long history of pesticide, fertilizer and medicinal use in India, has been studied extensively for its organic compounds. Here we present a physical, mineralogical and geochemical database resulting from the analyses of two Neem soil profiles (epipedons) in India. Neem tree derivatives are used in the manufacture of a variety of products, from anti-bacterial drugs and insecticides to fertilizers and animal feeds. A preliminary geochemical and mineralogical analysis of Neem soils is made to explore the potential for chemical links between Neem tree derivatives and soils. Physical soil characteristics, including colour, texture and clay mineralogy, suggest the two pedons formed under different hydrological regimes, and hence, are products of different leaching environments, one well-drained site, the other poorly drained. Geochemically, the two Neem soils exhibit similarities, with elevated concentrations of Th and rare earth elements. These elements are of interest because of their association with phosphates, especially monazite and apatite, and the potential link to fertilizer derivatives. Higher concentrations of trace elements in the soils may be linked to nutritional derivatives and to cell growth in the Neem tree.

Deleterious Effects of Lard-enriched Diet on Tissues Fatty Acids Composition and Hypothalamic Insulin Actions

Altered tissue fatty acid (FA) composition may affect mechanisms involved in the control of energy homeostasis, including central insulin actions. In rats fed either standard chow or a lard-enriched chow (high in saturated/low in polyunsaturated FA, HS-LP) for eight weeks, we examined the FA composition of blood, hypothalamus, liver, and retroperitoneal, epididymal and mesenteric adipose tissues. Insulin-induced hypophagia and hypothalamic signaling were evaluated after intracerebroventricular insulin injection. HS-LP feeding increased saturated FA content in adipose tissues and serum while it decreased polyunsaturated FA content of adipose tissues, serum, and liver. Hypothalamic C20:5n-3 and C20:3n-6 contents increased while monounsaturated FA content decreased. HS-LP rats showed hyperglycemia, impaired insulin-induced hypophagia and hypothalamic insulin signaling. The results showed that, upon HS-LP feeding, peripheral tissues underwent potentially deleterious alterations in their FA composition, whist the hypothalamus was relatively preserved. However, hypothalamic insulin signaling and hypophagia were drastically impaired. These findings suggest that impairment of hypothalamic insulin actions by HS-LP feeding was not related to tissue FA composition.

Activité physique durant la grossesse: associations avec le poids de naissance et la composition corporelle du nouveau-né

Plusieurs études se sont penchées sur les effets de l’activité physique maternelle sur le poids du nouveau-né, un paramètre reflétant l’environnement intra-utérin associé au risque ultérieur d’obésité et de problèmes métaboliques. Devant les taux alarmants d’obésité infantile à travers le monde, l’identification d’interventions préventives efficaces devient un enjeu majeur dans la lutte contre l’obésité et ses complications. L’activité physique maternelle pourrait être une avenue intéressante, étant donné ses effets bénéfiques sur le gain de poids et le profil métabolique maternels et son potentiel de diminution du poids de naissance de l’enfant. Cependant, la dose optimale d’activité physique et ses effets sur la composition corporelle du nouveau-né sont encore méconnus. Par ailleurs, la majorité des femmes enceintes ne rencontrent pas les recommandations en matière d’activité physique durant la grossesse et les femmes obèses, chez qui les bienfaits de l’activité physique pourraient possiblement avoir le plus grand impact, présentent souvent les niveaux les plus bas. Curieusement, peu d’études ont évalué les effets d’une intervention d’activité physique durant la grossesse dans cette population. Ainsi, avant d’envisager l’activité physique comme une intervention thérapeutique non-pharmacologique durant la grossesse, il importe d’en évaluer la faisabilité et la sécurité et d’en connaître extensivement les effets. Notamment, il s’avère primordial de vérifier s’il est possible d’augmenter en toute sécurité les niveaux d’activité physique durant la grossesse, particulièrement chez les femmes obèses, et de distinguer les effets spécifiques de différents stimuli d’activité physique (variant en type, volume, intensité et moment de la grossesse) sur la croissance fœtale. Dans ce contexte, nous avons dans un premier temps entrepris une revue systématique de la littérature des études observationnelles portant sur l’association entre l’activité physique maternelle et les paramètres de croissance fœtale mesurés à la naissance. Dans un deuxième temps, 2 études de cohortes évaluant l’impact du type, du volume, de l’intensité et du trimestre de pratique de l’activité physique ont été menées afin de complémenter et d’approfondir les résultats de la revue systématique. Finalement, une étude d’intervention randomisée a été réalisée afin d’évaluer s’il est possible d’améliorer les niveaux d’activité physique durant la grossesse chez les femmes enceintes obèses. Nos travaux ont permis d’illustrer l’influence variable que différents stimuli d’activité physique maternelle peuvent avoir sur l’anthropométrie néonatale. La revue systématique a montré qu’un volume moyen d’activité physique est associé à une augmentation du poids de naissance comparativement à un volume plus faible, alors qu’un volume élevé est associé à une diminution du poids de naissance, comparativement à un volume plus faible. Nos données suggèrent également que l’association entre l’activité physique maternelle et le poids de naissance varie en présence de certaines caractéristiques maternelles. Notamment, nous avons montré pour la première fois que l’activité physique vigoureuse pratiquée en début de grossesse était associée à une diminution importante du poids de naissance chez les femmes qui reçoivent un diagnostic de pré-éclampsie en fin de grossesse. L’importance de l’intensité de l’activité physique dans la relation entre l’activité physique maternelle et la croissance fœtale a également été soulignée pour la première fois dans notre étude de cohorte avec mesure de la composition corporelle néonatale. Contrairement à l’activité physique d’intensité modérée, l’activité physique vigoureuse en début de grossesse est associée à une diminution du poids de naissance, principalement en raison d’une adiposité néonatale réduite. Finalement, les résultats de l’essai randomisé ont permis d’établir la faisabilité d’une intervention d’activité physique supervisée visant à augmenter la pratique d’activité physique chez des femmes enceintes obèses et le potentiel d’une telle intervention à favoriser le maintien de la condition physique et une meilleure gestion du gain de poids chez ces femmes. L’ensemble de ces résultats permet de mieux cerner l’impact de l’activité physique maternelle sur la croissance fœtale, en fonction des caractéristiques spécifiques du stimulus d’activité physique mais également de la population étudiée. La faisabilité d’une intervention d’activité physique prénatale dans une population de femmes obèses laisse entrevoir de nouvelles possibilités dans la prévention de l’obésité infantile et de ses complications. L’identification d’une dose optimale d’activité physique favorisant la santé de l’enfant à court et à long terme dans diverses populations de femmes enceintes et l’identification des facteurs permettant une meilleure adhérence aux recommandations qui en découleront constituent des pistes de recherche essentielles à la lutte contre l’obésité.

Thermodynamic efficiency of carbon capture and utilisation in anaerobic batch digestion process

Carbon capture and storage (CCS) in the oil and water industries is becoming common and a significant consumer of energy typically requiring 150–450 °C and or several hundred bar pressure [1] particularly in geological deposition. A biological carbon capture and conversion has been considered in conventional anaerobic digestion processes. The process has been utilised in biological mixed culture, where acetoclastic bacteria and hydrogenophilic methanogens play a major key role in the utilisation of carbon dioxide. However, the bio catalytic microorganisms, hydrogenophilic methanogens are reported to be unstable with acetoclastic bacteria. In this work the biochemical thermodynamic efficiency was investigated for the stabilisation of the microbial process in carbon capture and utilisation. The authors observed that a thermodynamic efficiency of biological carbon capture and utilisation (BCCU) had 32% of overall reduction in yield of carbon dioxide with complimentary increase of 30% in yield of methane, while the process was overall endothermic. Total consumption of energy (≈0.33 MJ l−1) was estimated for the carbonate solubility (0.1 mol l−1) in batched BCCU. This has a major influence on microbial composition in the bioreactor. This thermodynamic study is an essential tool to aid the understanding of the interactions between operating parameters and the mixed microbial culture.

Características fitoquímicas e propriedades antioxidantes do grão de café verde

Entre os produtos comercializados a nível mundial, o café é um dos mais valiosos, sendo apenas superado pelo petróleo em termos de movimentações financeiras. Assim, torna-se indiscutível a importância do café na política e na economia de muitos países, pois o seu cultivo, processamento, comercialização, transporte e mercado criam milhões de empregos por todo o mundo. A composição química do café constitui um parâmetro fundamental na distinção das diferentes variedades deste produto, recorrendo-se frequentemente à análise de compostos como a cafeína, o ácido hidroxicinâmico e o ácido clorogénico, entre outros. O principal objetivo deste trabalho focou-se no estudo do perfil dos compostos bioativos presentes em grãos de café verde provenientes de Cabo Verde e das inerentes propriedades antioxidantes. Mais concretamente, procedeu-se à quantificação dos compostos bioativos com maior importância no café, como é o caso dos fenólicos e flavonoides totais, das antocianinas e dos carotenoides. A quantidade de compostos fenólicos totais encontrados na amostra dos grãos de café verde foi 4,855 mg/g. Quanto à quantidade de flavonoides totais, foi 41,2 mg/g e de antocianinas 0,465 mg/g. Relativamente aos carotenoides estudados, a clorofila a apresenta-se em quantidade igual a 1,5×10 mg/g, a clorofila b, 1,6×10 mg/g, o licopeno, 6×10 mg/g e o β-caroteno aparenta ser inexistente nesta amostra. A quantificação destes compostos bioativos comprovou a sua presença na amostra de café verde e, consequentemente, evidenciou os potenciais benefícios que este produto traz para a saúde, sendo a capacidade antioxidante o mais prevalente.

Obtenção de concentrado proteico do farelo de arroz e avaliação das propriedades químicas e funcionais

Esta dissertação é composta por 5 artigos.

Influence of one selected Tisochrysis lutea strain rich in lipids on Crassostrea gigas larval development and biochemical composition

Effects of a remarkably high overall lipid Tisochrysis lutea strain (T+) upon gross biochemical composition, fatty acid (FA), sterol and lipid class composition of Crassostrea gigas larvae were evaluated and compared with a normal strain of Tisochrysis lutea (T) and the diatom Chaetoceros neogracile (Cg). In a first experiment, the influence of different single diets (T, T+ and Cg) and a bispecific diet (TCg) was studied, whereas, effects of monospecific diets (T and T+) and bispecific diets (TCg and T+Cg) were evaluated in a second experiment. The strain T+ was very rich in triglycerides (TAG: 93–95% of total neutral lipids), saturated FA (45%), monounsaturated FA (31–33%) and total fatty acids (4.0–4.7 pg cell−1). Larval oyster survival and growth rate were positively correlated with 18:1n-7 and 20:1n-7, in storage lipids (SL), and negatively related to 14:0, 18:1n-9, 20:1n-9, 20:4n-6 and trans-22-dehydrocholesterol in membrane lipids (ML). Surprisingly, only the essential fatty acid 20:5n-3 in SL was correlated positively with larval survival. Correlations suggest that physiological disruption by overabundance of TAG, FFA and certain fatty acids in larvae fed T+ was largely responsible for the poor performance of these larvae. ‘High-lipid’ strains of microalgae, without regard to qualitative lipid composition, do not always improve bivalve larval performance.

Produção de isolado proteico proveniente de subprodutos da indústria de aves em diferentes escalas

A indústria de aves brasileira destaca-se economicamente, onde um total de 12,3 milhões de toneladas foi produzido no país em 2013. Esta produção em larga escala gera considerável volume de subprodutos, chegando até 35% da ave viva. Tais resíduos são convertidos, por processos tradicionais, em produtos de baixo valor comercial, como por exemplo, farinhas. O processo de variação de pH constitui um importante processo alternativo de obtenção de proteínas com melhores características funcionais e nutricionais. Estudar as variáveis do processo, efetuando aumento dimensional, é fundamental para aplicação das tecnologias desenvolvidas no laboratório e posterior definição final de processos industriais. A produção de isolados proteicos seria uma tecnologia atraente no aproveitamento de subprodutos da indústria de frango, convertendo-os em uma ótima fonte proteica, agregando valor ao produto obtido. Este trabalho teve por objetivo produzir isolados proteicos em diferentes escalas, utilizando subprodutos não comestíveis da indústria de frango. Foi estudada a solubilização das proteínas da matéria-prima (MP) para definir pHs de solubilização e de precipitação isoelétrica. A curva apontou um pH alcalino de 11,0 para etapa de solubilização e de 5,25 para etapa de precipitação proteica. As proteínas obtidas foram caracterizadas quanto sua composição proximal, índice de acidez (IA), índice de peróxidos (IP) e substâncias reativas ao ácido tiobarbitúrico (TBARS) além de propriedades funcionais de solubilidade, capacidade de retenção de água (CRA) e capacidade de retenção de óleo (CRO); e nutricionais de digestibilidade proteica. Comparativamente foram analisadas farinhas de vísceras comerciais nos mesmos parâmetros. Um aumento de escala do processo foi realizado e avaliado pelas mesmas respostas do produto da escala laboratorial. Foi obtido um teor proteico de 82 e 85% em escala laboratorial e aumento de escala, respectivamente, e também uma redução lipídica de 75%, e de cinzas de 85%, em relação à MP. A composição proximal das farinhas analisadas ficou entre 67-72% para proteína bruta, 17-22% para lipídios e 9-15% para cinzas. O IA, apresentou valores de 2,2 e 3,1 meq/g de isolado e de 1,6 a 2,0 meq/g de farinha. Já para IP, obteve-se valores de 0,003 a 0,005 meq/g de isolado e de 0,002 a 0,049 meq/g de farinha. Os índices de TBARS apontaram valores de 0,081 e 0,214 mg MA/g de isolado e 0,041 a 0,128 mg MA/g de farinha. A solubilidade das proteínas do isolado apontou 84 e 81% em pH 3 e 11 respectivamente e de 5% em pH 5, já para farinhas variaram de 22 a 31% em pH de 3 a 11. A CRA obtida no isolado foi 3,1 a 16,5 g água/g de proteína e de 3,8 a 10,9 g água/g de proteína nas farinhas. A CRO ficou em 4,2 mL de óleo/g de proteína do isolados e 2,6 mL de óleo/g de proteína da farinhas. Os isolados proteicos apresentaram 92 e 95% de digestibilidade das proteínas, em comparação aos 84% das farinhas comerciais. Os índices acumulados e apresentados neste trabalho concluíram que foi possível aumentar a escala do processo de variação de pH, sem perder qualidade nos índices físico-químicos e de digestibilidade proteica.

Produção de lipidios funcionais por ação de lipase fúngica

A modificação estrutural de óleos e gorduras é uma das principais áreas de interesse de pesquisa em diferentes setores industriais. No caso da indústria de alimentos, a interesterificação é empregada para melhorar propriedades nutricionais e funcionais, em que se obtêm compostos diferentes dos que lhes deram origem. As lipases microbianas são os biocatalisadores mais utilizados industrialmente, por serem mais estáveis, específicas e com propriedades bem mais diversificadas que as lipases de outras fontes. Este trabalho objetivou, primeiramente, a caracterização da gordura da pele de frango (GPF) e sua comparação com óleo de soja, como referência, visando a utilização de GPF em reações de interesterificação. Para isto foram caracterizados quanto aos índices de rancidez hidrolítica e oxidativa, bem como de matéria insaponificável, índices de saponificação, refração e iodo. Foi realizado ainda o fracionamento e perfil de ácidos graxos destes lipídios e suas frações, com o cálculo de seus índices nutricionais. Foi verificado que a GPF apresentou qualidade satisfatória devido aos baixos índices de acidez (0,65 g ácido oleico.100 g -1 ), peróxido (2,14 meq.kg-1 ), p-anisidina (0,70 unidades de absorvância.g-1 ), além de fonte de ácidos graxos mono-insaturados (40%), sendo fonte promissora para estudos de interesterificação. Em um segundo momento o objetivo foi produzir lipídios modificados ricos em ácidos graxos essenciais a partir da gordura da pele de frango e ácidos graxos ramificados, utilizando lipase sn-1,3 específica e interesterificação do tipo acidólise. Foram estudados os fatores concentração de enzima, adição de água, proporção de substratos e tempo, segundo um planejamento experimental fatorial completo 2 4 . As separações analíticas foram executadas em placas de cromatografia de camada delgada, sendo as frações posteriormente extraídas, ressuspensas e injetadas no cromatógrafo a gás. Foi verificado que a adição de água ao meio reacional apresentou efeito significativo (p<0,05) para todos ácidos graxos avaliados dos triacilgliceróis, sendo que para o ácido essencial linoleico (C18:2) o efeito do tempo de reação também foi significativo, sendo verificado que quanto maior o tempo de reação, menor a quantidade de água a ser adicionada. Em um terceiro momento, o objetivo foi produzir éster fenólico a partir do DHCA, além de realizar reações de transesterificação deste éster com tricaprilina. Para a reação de transesterificação, foi utilizado um delineamento composto central rotacional (DCCR) variando a quantidade de enzima, tempo de reação e temperatura sobre a resposta (%) dos reagentes consumidos. A lipase Novozym® 435 de Candida antarctica foi utilizada como catalisador de todas reações. Foi verificado que a maior produção de éster (50%) ocorreu em oito dias. Nas reações de transesterificação, as relações molares em que houve maior consumo do éster produzido foram 1:5 e 1:10, sendo obtidos 21,1% e 29,6% de residual de dihidrocafeato de octila, respectivamente em 24 h. Foi observado que em altas temperaturas e tempo superior a 26 h, houve o menor residual de dihidrocafeato de octila (18,2%). Foram identificados três diferentes compostos fenólicos, contendo em sua estrutura dihidrocafeato de octila e ácido caprílico.