The influence of Monte Carlo source parameters on detector design and dose perturbation in small field dosimetry

To obtain accurate Monte Carlo simulations of small radiation fields, it is important model the initial source parameters (electron energy and spot size) accurately. However recent studies have shown that small field dosimetry correction factors are insensitive to these parameters. The aim of this work is to extend this concept to test if these parameters affect dose perturbations in general, which is important for detector design and calculating perturbation correction factors. The EGSnrc C++ user code cavity was used for all simulations. Varying amounts of air between 0 and 2 mm were deliberately introduced upstream to a diode and the dose perturbation caused by the air was quantified. These simulations were then repeated using a range of initial electron energies (5.5 to 7.0 MeV) and electron spot sizes (0.7 to 2.2 FWHM). The resultant dose perturbations were large. For example 2 mm of air caused a dose reduction of up to 31% when simulated with a 6 mm field size. However these values did not vary by more than 2 % when simulated across the full range of source parameters tested. If a detector is modified by the introduction of air, one can be confident that the response of the detector will be the same across all similar linear accelerators and the Monte Carlo modelling of each machine is not required.

Ecological design with respect to the environment of large-scale marina developments in Queensland

Ecological principles have been employed to assist in the sustainability of a suite of 'gateway' marinas currently being developed in Queensland. Tasks included (a) location and fostering of core remnant native vegetation areas, (b) understanding the dynamic patterns of region behaviour using the ecological strategies employed by key flora and fauna species, (c) promoting those native wildlife species best characterising the region, and (d) allocating management actions along elongated buffer zones to the catchment headwaters (rather than only peripheral to the property). The design of infrastructure and its relationship to sustainable landscape development is lacking such a response int eh planning and detailing of new marinas. This paper distinguishes between the practice of landscape ecology and the design of ecological landscapes, offering examples of the principles of the latter in support of the concept of ecological landscape practice.

Dancing to too many tunes : contemporary course design in teacher education

Contemporary course designers in schools and faculties of Education are finding themselves dancing to many tunes, arguably too many tunes, in order to have their initial teacher education courses accredited by external agencies whilst satisfying internal approval processes and, critically, maintaining the philosophical integrity of their programs and their institutional watermarks. The “tunes” here are the agendas driven by and the demands made by distinct independent agencies. The external agencies influencing Education include: TEQSA (Tertiary Education Quality and Standards Agency) which will assure alignment to the AQF (Australian Qualifications Framework); professional bodies such as AITSL (Australian Institute for Teaching and School Leadership) which now accredits all pre-service teacher Education courses across Australia and assures alignment with the Australian Professional Standards for Teachers; and the state and territory regulatory authorities that have an impact within a specific jurisdiction, for example, the Queensland College of Teachers (QCT) and the Teacher Registration Board of Western Australia (TRBWA). This paper – whose findings have been arrived at through a year-long OLT National Teaching Fellowship - will outline the complex and competing agendas currently at play and focus on the disjuncture evident in the fundamental defining of who is a “graduate.” It will also attempt to identify where there are synergies between the complex demands being made. It will argue that there are too many “tunes” and the task of finding a balance between compliance and delivering effective initial teacher education may not be possible because of the cacophony of their conflicting demands.

Creative practices in the design studio culture : collaboration and communication

For the purpose of developing collaborative support in design studio environments, we have carried out ethnographic fieldwork in professional and academic product design studios. Our intention was to understand design practices beyond the productivity point of view and take into account the experiential, inspirational and aesthetical aspects of design practices. Using examples from our fieldwork, we develop our results around three broad themes by which design professionals support communication and collaboration: (1) use of artefacts, (2) use of space and (3) designerly practices. We use the results of our fieldwork for drawing implications for designing technologies for the design studio culture.

Artful surfaces : an ethnographic study exploring the use of space in design studios

A largely overlooked aspect of creative design practices is how physical space in design studios plays a role in supporting designers' everyday work. In particular, studio surfaces such as designers' desks, office walls, notice boards, clipboards and drawing boards are full of informative, inspirational and creative artefacts such as, sketches, drawings, posters, story-boards and Post-it notes. Studio surfaces are not just the carriers of information but importantly they are sites of methodic design practices, i.e. they indicate, to an extent, how design is being carried out. This article describes the results of an ethnographic study on the use of workplace surfaces in design studios, from two academic design departments. Using the field study results, the article introduces an idea of ‘artful surfaces’. Artful surfaces emphasise how artfully designers integrate these surfaces into their everyday work and how the organisation of these surfaces comes about helping designers in accomplishing their creative and innovative design practices. Using examples from the field study, the article shows that artful surfaces have both functional and inspirational characteristics. From the field study, three types of artful surfaces are identified: personal; shared; and project-specific. The article suggests that a greater insight into how these artful surfaces are created and used could lead to better design of novel display technologies to support designers' everyday work.

Supporting cooperative design through "living" artefacts

We present findings from a field trial of CAM (Cooperative Artefact Memory) -- a mobile-tagging based messaging system -- in a design studio environment. CAM allows individuals to collaboratively store relevant information onto their physical design artefacts, such as sketches, collages, story-boards, and physical mock-ups in the form of messages, annotations and external web links. We studied the use of CAM in three student design projects. We observed that CAM facilitated new ways of collaborating in joint design projects. The serendipitous and asynchronous nature of CAM facilitated expressions of design aesthetics, allowed designers to have playful interactions, supported exploration of new design ideas, and supported designers' reflective practices. In general, our results show how CAM transformed mundane design artefacts into "living" artefacts that made the creative and playful side of cooperative design visible.

Collaborative practices that support creativity in design

Design is a ubiquitous, collaborative and highly material activity. Because of the embodied nature of the design profession, designers apply certain collaborative practices to enhance creativity in their everyday work. Within the domain of industrial design, we studied two educational design departments over a period of eight months. Using examples from our fieldwork, we develop our results around three broad themes related to collaborative practices that support the creativity of design professionals: 1) externalization, 2) use of physical space, and; 3) use of bodies. We believe that these themes of collaborative practices could provide new insights into designing technologies for supporting a varied set of design activities. We describe two conceptual collaborative systems derived from the results of our study.

Space as a resource in creative design practices

Based on longitudinal ethnographic fieldwork in two industrial design departments and two design companies, we explore the role of spatial arrangements for supporting creative design practices within different design studios. From our results, we show that designers explicitly make use of the physical space for: 1) communicating and inspiring design ideas; 2) exploring design solutions, and; 3) managing design projects. We believe that these design practices could bring insightful implications for developing ubiquitous technologies to support the design profession.

Artful surfaces in design practices

A largely overlooked aspect of innovative design practices is how workplace surfaces play a role in supporting designers' everyday work. In this paper we introduce the idea of artful surfaces. Artful surfaces (Figure 1) are full of informative, inspirational and creative artefacts that help designers accomplish their everyday design practices. The way these surfaces are created and used could provide information about how designers work. We identify four types of artful surfaces: personal, shared, project-specific and live surfaces; and describe them using examples.

Experiential role of artefacts in cooperative design

The role of material artefacts in supporting distributed and co-located work practices has been well acknowledged within HCI and CSCW research. In this paper, we show that in addition to their ecological, coordinative and organizational support, artefacts also play an 'experiential' role. In this case, artefacts not only improve efficiency or have a purely functional role (e.g. allowing people to complete tasks quickly), but the materiality, use and manifestations of these artefacts bring quality and richness to people's performance and help them make better sense of their everyday lives. In a domain such as industrial design, such artefacts play an important role for supporting creativity and innovation. Based on our ethnographic fieldwork on understanding cooperative design practices of industrial design students and researchers, we describe several experiential practices that are supported by design-related artefacts such as sketches, drawings, physical models and explorative prototypes -- used and developed in designers' everyday work. Our main intention in carrying out this kind of research is to develop technologies to support designers' everyday practices. We believe that with the emergence of ubiquitous computing, there is a growing need to focus on the personal, social and creative side of people's everyday experiences. By focusing on the experiential practices of designers, we can provide a much broader view in the design of new interactive technologies.

Paper-based mixed reality sketch augmentation as a conceptual design support tool

This undergraduate student paper explores usage of mixed reality techniques as support tools for conceptual design. A proof-of-concept was developed to illustrate this principle. Using this as an example, a small group of designers was interviewed to determine their views on the use of this technology. These interviews are the main contribution of this paper. Several interesting applications were determined, suggesting possible usage in a wide range of domains. Paper-based sketching, mixed reality and sketch augmentation techniques complement each other, and the combination results in a highly intuitive interface.

"Show me, how does it look now" : remote help-giving in collaborative design

This paper examines the role of visual information in a remote help-giving situation involving the collaborative physical task of designing a prototype remote control. We analyze a set of video recordings captured within an experimental setting. Our analysis shows that using gestures and relevant artefacts and by projecting activities on the camera, participants were able to discuss several design-related issues. The results indicate that with a limited camera view (mainly faces and shoulders), participants' conversations were centered at the physical prototype that they were designing. The socially organized use of our experimental setting provides some key implications for designing future remote collaborative systems.

A threshold concepts focus to curriculum design: supporting student learning through application of variation theory

This project develops and evaluates a model of curriculum design that aims to assist student learning of foundational disciplinary ‘Threshold Concepts’. The project uses phenomenographic action research, cross-institutional peer collaboration and the Variation Theory of Learning to develop and trial the model. Two contrasting disciplines (Physics and Law) and four institutions (two research-intensive and two universities of technology) were involved in the project, to ensure broad applicability of the model across different disciplines and contexts. The Threshold Concepts that were selected for curriculum design attention were measurement uncertainty in Physics and legal reasoning in Law. Threshold Concepts are key disciplinary concepts that are inherently troublesome, transformative and integrative in nature. Once understood, such concepts transform students’ views of the discipline because they enable students to coherently integrate what were previously seen as unrelated aspects of the subject, providing new ways of thinking about it (Meyer & Land 2003, 2005, 2006; Land et al. 2008). However, the integrative and transformative nature of such threshold concepts make them inherently difficult for students to learn, with resulting misunderstandings of concepts being prevalent...

Constrained control design for dynamic positioning of marine vehicles with control allocation

In this paper, we address the control design problem of positioning of over-actuated marine vehicles with control allocation. The proposed design is based on a combined position and velocity loops in a multi-variable anti-windup implementation together with a control allocation mapping. The vehicle modelling is considered with appropriate simplifications related to low-speed manoeuvring hydrodynamics and vehicle symmetry. The control design is considered together with a control allocation mapping. We derive analytical tuning rules based on requirements of closed-loop stability and performance. The anti- windup implementation of the controller is obtained by mapping the actuator-force constraint set into a constraint set for the generalized forces. This approach ensures that actuation capacity is not violated by constraining the generalized control forces; thus, the control allocation is simplified since it can be formulated as an unconstrained problem. The mapping can also be modified on-line based on actuator availability to provide actuator-failure accommodation. We provide a proof of the closed-loop stability and illustrate the performance using simulation scenarios for an open-frame underwater vehicle.

Design of an integrated platform for V2X wireless communications and positioning supporting C-ITS safety applications

In this paper, an integrated inter-vehicles wireless communications and positioning system supporting alternate positioning techniques is proposed to meet the requirements of safety applications of Cooperative Intelligent Transportation Systems (C-ITS). Recent advances have repeatedly demonstrated that road safety problems can be to a large extent addressed via a range of technologies including wireless communications and positioning in vehicular environments. The novel communication stack utilizing a dedicated frequency spectrum (e.g. at 5.9 GHz band), known as Dedicated Short-Range Communications (DSRC), has been particularly designed for Wireless Access in Vehicular Environments (WAVE) to support safety applications in highly dynamic environments. Global Navigation Satellite Systems (GNSS) is another essential enabler to support safety on rail and roads. Although current vehicle navigation systems such as single frequency Global Positioning System (GPS) receivers can provide route guidance with 5-10 meters (road-level) position accuracy, positioning systems utilized in C-ITS must provide position solutions with lane-level and even in-lane-level accuracies based on the requirements of safety applications. This article reviews the issues and technical approaches that are involved in designing a vehicular safety communications and positioning architecture; it also provides technological solutions to further improve vehicular safety by integrating the DSRC and GNSS-based positioning technologies.