STUDY of THE TURNING NICKEL BASE ALLOY PYROMET (R) 31V (SAE HEV8)

Considering the constant technological developments in the aeronautical, space, automotive, shipbuilding, nuclear and petrochemical fields, among others, the use of materials with high strength mechanical capabilities at high temperatures has been increasingly used. Among the materials that meet the mechanical strength and corrosion properties at temperatures around 815 degrees C one can find the nickel base alloy Pyromet 31V (SAE HEV8). This alloy is commonly applied in the manufacturing of high power diesel engines exhaust valves where it is required high resistance to sulphide, corrosion and good resistance to creep. However, due to its high mechanical strength and low thermal conductivity its machinability is made difficult, creating major challenges in the analysis of the best combinations among machining parameters and cutting tools to be used. Its low thermal conductivity results in a concentration of heat at high temperatures in the interfaces of workpiece-tool and tool-chip, consequently accelerating the tools wearing and increasing production costs. This work aimed to study the machinability, using the carbide coated and uncoated tools, of the hot-rolled Pyromet 31V alloy with hardness between 41.5 and 42.5 HRC. The nickel base alloy used consists essentially of the following components: 56.5% Ni, 22.5% Cr, 2,2% Ti, 0,04% C, 1,2% Al, 0.85% Nb and the rest of iron. Through the turning of this alloy we able to analyze the working mechanisms of wear on tools and evaluate the roughness provided on the cutting parameters used. The tests were performed on a CNC lathe machine using the coated carbide tool TNMG 160408-23 Class 1005 (ISO S15) and uncoated tools TNMG 160408-23 Class H13A (ISO S15). Cutting fluid was used so abundantly and cutting speeds were fixed in 75 and 90 m/min. to feed rates that ranged from 0.12, 0.15, 0.18 and 0.21 mm/rev, and cutting depth of 0.8mm. The results of the comparison between uncoated tools and coated ones presented a machined length of just 30% to the first in relation to the performance of the second. The coated tools has obtained its best result for both 75 and 90 m/min. with feed rate of 0.15 mm/rev, unlike the uncoated tool which obtained its better results to 0.12 mm/rev.

Effects of Milling on Surface Integrity of Low-Carbon Steel

This work measured the effect of milling parameters on the surface integrity of low-carbon alloy steel. The Variance Analysis showed that only depth of cut did not influence on the workpiece roughness and the Pearson's Coefficient indicated that cutting speed was more influent than tool feed. All cutting parameters introduced tensile residual stress in workpiece surface. The chip formation mechanism depended specially on cutting speed and influenced on the roughness and residual stress of workpiece.

Spatial variability of soil water content and mechanical resistance of Brazilian ferralsol

The spatial variability of mechanical resistance to penetration (PR) and gravimetric moisture (GM) was studied at a depth of 0-0.40 m, in a ferralsol cropped with corn, and under conventional tillage in llha Solteira, Brazil (latitude 20 degrees 17'S, and longitude 52 degrees 25'W). The purpose of this study was to analyse and to try explaining the spatial variability of the mentioned soil physical properties using geostatistics. Soil data was collected at points arranged on the nodes of a mesh with 97 points. Geostatistics was used to analyse the spatial variability of PR and GM at four depths: 0-0. 1, 0.1-0.2, 0.2-0.3 and 0.3-0.4 m. PR showed a higher variability of data, with coefficients of variation of 52.39, 30.54, 16.91, and 15.18%, from the surface layers to the deepest layers. The values of the coefficients of variation for GM were lower: 9.99, 5.13, 5.59, and 5.69%. Correlation between GM and PR for the same soil layers was low. Penetration resistance showed spatial structure only in the 0.30-0.40 m layer, while gravimetric moisture showed spatial structure at all depths except for 0-0. 10 m. All the models of fitted semivariograms were spherical and exponential, with ranges of 10-80 m. Data for the variable 'GM' in the 0.20-0.30 and 0.30-0.40 m layers revealed a trend in data attributed to the occurrence of subsurface water flow. (C) 2005 Elsevier B.V. All rights reserved.

Sowing depths of brachiaria in intercropping with corn in no tillage planting

A produção de forragem na integração lavoura-pecuária é de suma importância, tanto para alimentação animal como para formação de palhada para plantio direto. O experimento foi conduzido no outono/inverno de 2009 e 2010, em Selvíria -MS, na Fazenda de Ensino, Pesquisa e Extensão da FEIS/UNESP. O objetivo foi avaliar a profundidade mais adequada para deposição das sementes de duas espécies de braquiárias em consórcio com milho, com ênfase para a produtividade do milho e formação de palha. O delineamento experimental foi em blocos ao acaso, em esquema fatorial 3 x 3, com quatro repetições. Os tratamentos principais foram duas espécies de braquiárias (Urochloa brizantha cv. Marandú e Urochloa ruziziensis), cujas sementes foram misturadas ao fertilizante do milho, e um tratamento-testemunha (sem consórcio). Os tratamentos secundários constituíram-se em três profundidades (8; 10 e 16 cm) de deposição do fertilizante (em consórcio e na testemunha). Os consórcios de milho com braquiária produziram quantidades de palha semelhantes. A produção total de palha foi maior nos consórcios e nas menores profundidades. O consórcio com U. ruziziensis propiciou maior produtividade de grãos de milho em relação ao com U. brizantha, em 2010. As profundidades de semeadura das forrageiras não afetaram a produtividade de milho.

The use of scaled semivariograms to plan soil sampling in sugarcane fields

Spatial sampling designs used to characterize the spatial variability of soil attributes are crucial for science studies. Sample planning for the interpolation of a regionalized variable may use several criteria, which could be best selected from an estimated semivariogram from a previously established grid. The objective of this study was to optimize the procedure for scaled semivariogram use to plan soil sampling in sugarcane fields in the Alfisol and Oxisol regions of Jaboticabal Town in So Paulo State, Brazil. A scaled semivariogram for several soil chemical attributes was estimated from the data obtained from two grids positioned on a sugarcane field area, sampled at a depth of 0.0-0.5 m. The research showed that regular grids with uniform intervals did not express the real spatial variability of the soil attributes of Oxisols and Alfisols in the study area. The calculated final sampling density based on the scaled parameters of the semivariogram was one sample for each 2 ha in Area 1 (convex landscape) and one sample for each 1 ha in Area 2 (linear landscape), as indicated by SANOS 0.1 software. The combined use of the simulation programs and scaled semivariograms can be used to define sampling points. These results may help in soil fertility mapping and thereby improve nutrient management in sugarcane crops.

Effects of aspirin on mesenteric lymph nodes of rabbits as basis for its use on lymph nodes metastases

OBJETIVO: Avaliar os efeitos do ácido acetilsalicílico a 10% e 20% em linfonodos mesentéricos de coelhos para posterior embasamento e uso em metástases linfonodais. MÉTODOS: Um total de 20 linfonodos de 20 coelhos (divididos aleatoriamente em quatro grupos) foi avaliado. As soluções de aspirina a 10% (grupos A e C) e 20% (grupos B e D) foram injetadas em linfonodos mesentéricos de coelhos sadios e seus efeitos macroscópicos e histológicos foram avaliados em 24 horas (grupos A e B) e em sete dias (grupos C e D). RESULTADOS: Nos grupos avaliados em 24 horas (A e B) foi verificada intensa necrose e hemorragia, aumento importante de apoptose em todo o linfonodo, com alargamento dos seios medulares e aumento dos centros germinativos. Nos grupos avaliados em sete dias (C e D) também houve aumento da apoptose, com maior elevação de histiócitos e diminuição importante da necrose; a hemorragia foi ausente e aumento de células gigantes foi visualizado, conferindo processo inflamatório crônico do tipo corpo estranho. Não houve diferença entre as concentrações utilizadas (10 e 20%) em nenhuma das comparações. CONCLUSÕES: A injeção de aspirina em linfonodos causou necrose e um aumento de apoptose após 24 horas e após sete dias de tratamento, houve regeneração dos gânglios linfáticos, com diminuição intensa de necrose e grande aumento de apoptose. Uma vez que o aumento de apoptose é um dos pilares dos tratamentos antineoplásicos, estes resultados experimentais embasam eventual aplicação clínica da aspirina no tratamento de metástases linfonodais.

A complete dosimetric characterization of two Sr-90-Y-90 dermatologic applicators

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

An acqueous extract of Bidens pilosa L. protects liver from cholestatic disease: experimental study in young rats

OBJETIVO: Testar o efeito hepatoprotetor do extrato aquoso de Bidens pilosa L. (EBP) na doença hepática induzida pela ligadura e ressecção do ducto biliar comum (LRDBC) em ratos jovens. MÉTODOS: Estudamos ratos Wistar com 21º. dia de vida (P21) divididos em quatro grupos de 10 animais, Grupo SA: operação simulada e água; Grupo SD: operação simulada e EBP (160mg de folhas frescas/100g de peso corporal/dia); Grupo LA: LRDBC e água e Grupo LD: LRDBC e EBP diariamente. O tempo de sono por pentobarbital (TSP), aspartato (AST) e alanina (ALT) aminotransferase foram determinadas após o sacrifício (P70). O Score de Ruwart (SR) para fibrose hepática foi atribuído para cada animal. Foi realizada análise de variância com dois fatores e pelo teste de Tukey para comparações múltiplas ou por teste não paramétrico. RESULTADOS: Houve diferença estatisticamente significativa entre LA e LD nas variáveis: TSP (médias LA=390; LD=173), AST (médias LA=8, LD=5), ALT (medianas LA=2; LD=1) e SR (medianas LA=2; LD=1). CONCLUSÃO: EBP poderá ser empregado na fitoterapia da doença hepática induzida pela colestase obstrutiva crônica, pois protege a função hepática, diminui a velocidade de necrose e a intensidade da fibrose hepática na obstrução biliar extra-hepática.

Autologous implant of bone marrow mononuclear cells as treatment of induced equine tendinitis

Superficial digital flexor tendonitis is an important cause of lameness in horses and its incidence ranges from 13% to 30%, depending on the horse's activity. This injury can occur in yearlings and compromise its carriers by reinjury or even impossibility to return to athletic life. In spite of the long period required for tendon repair, the scar tissue presents lack of elasticity and stiffness. As current treatment strategies produce only marginal results, there has been great interest in research of therapies that influence the quality or the speed of tendon repair. Stem cell therapy has shown promising results in degenerative diseases and cases of deficient healing processes. This study aims to evaluate the influence of autologous mesenchymal bone marrow stem cells in tendon healing, comparing treated and non-treated tendons. Superficial digital flexor tendonitis lesions were induced by collagenase infiltration in both forelimbs of 6 horses, followed by autologous implant in one of the forelimbs of each animal. The horses were evaluated using clinical, ultrasonographic, histopathologic, and immunohistochemical parameters. Tendon biopsies were performed at Day 48. Results found in the treatment group, such as high inflammatory cells infiltration, extracellular matrix synthesis, reduced amount of necrosis areas, small increase in cellular proliferation (KI-67/MIB-1), and low immunoreactivity to transforming growth factor P I, suggested the acceleration of tendon repair in this group. Further studies should be conducted in order to verify the influence of this treatment on later phases of tendon repair. Overall, after analysis of the results, we can conclude that cellular therapy with the mononuclear fraction of bone marrow has accelerated tendon repair at 48 days after treatment.

Protective effects of carvedilol on systemic vascular damage induced by angiotensin II: Organ-specific effects independent of antihypertensive effects

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Epidemiology, clinical signs, histopathology and molecular characterization of canine leproid granuloma: a retrospective study of cases from Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of the Connector and Implant Design on the Implant-Tooth-Connected Prostheses

Purpose:The purpose of this study was to evaluate stress transfer patterns between implant-tooth-connected prostheses comparing rigid and semirigid connectors and internal and external hexagon implants.Materials and Methods:Two models were made of photoelastic resin PL-2, with an internal hexagon implant of 4.00 x 13 mm and another with an external hexagon implant of 4.00 x 13 mm. Three denture designs were fabricated for each implant model, incorporating one type of connection in each one to connect implants and teeth: 1) welded rigid connection; 2) semirigid connection; and 3) rigid connection with occlusal screw. The models were placed in the polariscope, and 100-N axial forces were applied on fixed points on the occlusal surface of the dentures.Results:There was a trend toward less intensity in the stresses on the semirigid connection and solid rigid connection in the model with the external hexagon; among the three types of connections in the model with the internal hexagon implant, the semirigid connection was the most unfavorable one; in the tooth-implant association, it is preferable to use the external hexagon implant.Conclusions:The internal hexagon implant establishes a greater depth of hexagon retention and an increase in the level of denture stability in comparison with the implant with the external hexagon. However, this greater stability of the internal hexagon generated greater stresses in the abutment structures. Therefore, when this association is necessary, it is preferable to use the external hexagon implant.

Local application of tetracycline solution with a microbrush: An alternative treatment for persistent periodontitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histometric analysis of ligature-induced periodontitis in rats: a comparison of histological section planes

The purpose of this study was to analyze the histometry of ligature-induced periodontitis in rats at different histological section depths. Sixteen male adult Wistar rats were randomly assigned to two groups: ligature and control. In the ligature group, rats received a sterile 4/0 silk ligature around the maxillary right 2nd molar. Thirty serial sections containing the 1st and 2nd molars, in which the coronal and root pulp, cementoenamel junction (CEJ) in the mesial side of the 2nd molar, interproximal alveolar bone and connective fiber attachment were clearly visible, were selected for histometric analysis. The histological sections were clustered in groups of 10 sections corresponding the buccal (B), central (C) and lingual (L) regions of the of periodontal tissue samples. The distance between the CEJ in the mesial side of the 2nd molar and the attached periodontal ligament fibers (CEJ-PL) as well as the distance between the CEJ and the alveolar bone crest (CEJ-BC) were determined. From CEJ-PL and CEJ-BC distances measured for each specimen, the measurements obtained in the B, L and C regions were recorded individually and together. Data were submitted to statistical analysis. Significant differences (p<0.001) were observed between the control and ligature groups regarding CEJ-PL (0.05 mm and 0.26 mm, respectively) and CEJ-BC (0.47 mm and 0.77 mm, respectively) measurements. Regarding the depth of the buccal, central and lingual planes, the means of CEJ-PL and CEJ-BC of both groups showed no statistically significant differences (p>0.05). In conclusion, the selection of 10 serial sections of the central region of periodontal tissue samples at any depth can be considered as representative for the evaluation of periodontal ligament fiber attachment and bone loss in ligature-induced periodontitis in rats.

Micromorphologic assessment of CVD (chemical vapor deposition) and conventional diamond tips and their cutting effectiveness

The aim of this study was to compare the micromorphology of CVD diamond tips coupled to ultrasound with conventional high speed diamond tips after cavity preparations, and to measure the width and depth of the cavities obtained. Two hundred bovine teeth were divided into 20 subgroups. Each of the diamond tips (10 CVD and 10 conventional) were used to prepare 10 standardized cavities, using an apparatus that controlled the time (t: 27 s), speed (5.3 mm/s) and load (0.012 KGF) of the tip against the teeth during preparation. The unused and the used (after one, five and 10 preparations) tips were analyzed by scanning electronic microscopy. The images were randomly assessed by 3 examiners with regard to the presence or absence of micromorphologic alterations. Cavity measurements were made after visualization under a stereoscopic microscope. Cavity widths and depths were analyzed by the ANOVA Factorial test (p < 0.05). The CVD diamond tips presented less wear than the conventional tips after all the cavity preparations performed, but produced shallower cavities that were equivalent in width to those made by conventional tips after the fifth preparation. CVD diamond tips may be suggested as an alternative to conventional diamond tips due to their conservative preparation and greater longevity.