An advanced method for eliminating impacts from frequency deviations in power system signal processing

Frequency deviation is a common problem for power system signal processing. Many power system measurements are carried out in a fixed sampling rate assuming the system operates in its nominal frequency (50 or 60 Hz). However, the actual frequency may deviate from the normal value from time to time due to various reasons such as disturbances and subsequent system transients. Measurement of signals based on a fixed sampling rate may introduce errors under such situations. In order to achieve high precision signal measurement appropriate algorithms need to be employed to reduce the impact from frequency deviation in the power system data acquisition process. This paper proposes an advanced algorithm to enhance Fourier transform for power system signal processing. The algorithm is able to effectively correct frequency deviation under fixed sampling rate. Accurate measurement of power system signals is essential for the secure and reliable operation of power systems. The algorithm is readily applicable to such occasions where signal processing is affected by frequency deviation. Both mathematical proof and numerical simulation are given in this paper to illustrate robustness and effectiveness of the proposed algorithm. Crown Copyright (C) 2003 Published by Elsevier Science B.V. All rights reserved.

A novel target-field method for magnetic resonance shim coils: III. Shielded zonal and tesseral coils

This paper continues the development of a new approach for the design of shim and gradient coils, used in magnetic resonance imaging (MRI) applications. A cylindrical primary coil of radius a and length 2L is placed inside a co-axial shield cylinder of radius b. An active shielding strategy is used to create a desired target field at an arbitrarily specified (cylindrical) location within the primary coil, and to annul the field at a certain radius outside the shield. The form of the interior target field may be chosen arbitrarily by the designer, although zonal and tesseral harmonics are typically used in MRI applications. The method presented here designs coil windings on both the primary and shielding cylinders, to produce fields that conform to the specified interior target field and the annulled field exterior to the shield. An additional feature of the method presented here is that the target field inside the primary coil is matched at two different radii, to improve overall accuracy. The method is illustrated by designing several shielded shim coils, for creating higher order tesseral fields located asymmetrically within the coil. The simpler case of pure zonal fields is discussed separately and applied to the design of some higher order shielded coils.

A genetic algorithm/method of moments approach to the optimization of an RF coil for MRI applications - Theoretical considerations - Abstract

A Combined Genetic Algorithm and Method of Moments design methods is presented for the design of unusual near-field antennas for use in Magnetic Resonance Imaging systems. The method is successfully applied to the design of an asymmetric coil structure for use at 190MHz and demonstrates excellent radiofrequency field homogeneity.

A practical method of estimating energy expenditure during tennis play

This study aimed to develop a practical method of estimating energy expenditure (EE) during tennis. Twenty-four elite female tennis players first completed a tennis-specific graded test in which five different intensity levels were applied randomly. Each intensity level was intended to simulate a game of singles tennis and comprised six 14 s periods of activity alternated with 20 s of active rest. Oxygen consumption (VO2) and heart rate (HR) were measured continuously and each player's rate of perceived exertion (RPE) was recorded at the end of each intensity level. Rate of energy expenditure (EEVO2) during the test was calculated using the sum of VO2 during play and the 'O-2 debt' during recovery, divided by the duration of the activity. There were significant individual linear relationships between EEVO2 and RPE, EEVO2 and HR, (rgreater than or equal to0.89 rgreater than or equal to0.93; p

Quantification of Listeria spp. contamination on shell and flesh of cooked black tiger prawns (Penaeus monodon)

Aims: To quantify Listeria levels on the shell and flesh of artificially contaminated cooked prawns after peeling, and determine the efficacy of Listeria innocua as a model for L. monocytogenes in this system. Methods and Results: A L. monocytogenes and L. innocua strain were inoculated separately onto cooked black tiger prawns using two protocols ( immersion or swabbing with incubation). Prawns were peeled by two methods ( gloved hand or scalpel and forceps) and numbers of Listeria on shells, flesh and whole prawn controls were determined. Prawns were exposed to crystal violet dye to assess the penetration of liquids. Regardless of preparation method or bacterial strain there were ca 1log(10) CFU more Listeria per shell than per peeled prawn. Dye was able to penetrate to the flesh in all cases. Conclusions: Shell-on prawns may be only slightly safer than shell-off prawns. Listeria innocua is an acceptable model for L. monocytogenes in this system. Significance and Impact of the Study: Reduced risk from L. monocytogenes on prawns can only be assured by adequate hygiene or heating.

Sex- and race-related differences in cross-sectional geometry and bone density of the femoral mid-shaft in older adults

Background : Femoral shaft fracture incidence increases in older adults and is associated with low-energy trauma. Apart from bone density, the distribution and size of bone contributes to its strength. Aim : To examine if bone geometry and density of the femoral mid-shaft in older adults differs by sex and race, we studied 197 White women, 225 Black women, 242 White men, and 148 Black men aged 70-79 years participating in the Health, Aging, and Body Composition study; a prospective cohort study in the USA. A secondary purpose of the study was to examine the association of site-specific muscle and fat to bone geometry and density. Subjects and methods : Subjects were community-dwelling and reported no difficulty walking one-quarter of a mile or climbing stairs. Mid-femoral volumetric bone mineral density (vBMD, mg cm -3 ), total area (TA), cortical area (CA), medullary area (MA), cross-sectional moments of inertia (CSMI: I x , I y , J ), and muscle and fat areas (cm 2 ) were determined by computed tomography (CT; GE CT-9800, 10 mm slice thickness). Results : vBMD was greater in men than women with no difference by race ( p < 0.001). Bone areas and area moments of inertia were also greater in men than women ( p < 0.001), with Black women having higher values than White women for TA and CA. Standardizing geometric parameters for body size differences by dividing by powers of femur length did not negate the sex difference for TA and MA. Significant differences ( p < 0.05) among the four groups also remained for I x and J . Mid-thigh muscle area was an independent contributor to TA in all groups (Std beta = 0.181-0.351, p < 0.05) as well as CA in women (Std beta = 0.246-0.254, p < 0.01) and CSMI in White women (Std beta = 0.175-0.185, p < 0.05). Further, muscle area was a significant contributor to vBMD in Black women. Conclusion : These results indicate that bone geometry and density of the femoral diaphysis differs primarily by sex, rather than race, in older well-functioning adults. In addition, site-specific muscle area appears to have a potential contributory role to bone geometry parameters, especially in women.

Surface diffusion of strongly adsorbing vapors in activated carbon by a differential permeation method

Conventional methods to determine surface diffusion of adsorbed molecules are proven to be inadequate for strongly adsorbing vapors on activated carbon. Knudsen diffusion permeability (B-k) for strongly adsorbing vapors cannot be directly estimated from that of inert gases such as helium. In this paper three models are considered to elucidate the mechanism of surface diffusion in activated carbon. The transport mechanism in all three models is a combination of Knudsen diffusion, viscous flow and surface diffusion. The collision reflection factor f (which is the fraction of molecules undergoing collision to the solid surface over reflection from the surface) of the Knudsen diffusivity is assumed to be a function of loading. It was found to be 1.79 in the limit of zero loading, and decreases as loading increases. The surface diffusion permeability increases sharply at very low pressures and then starts to decrease after it has reached a maximum (B(mum)s) at a threshold pressure. The initial rapid increase in the total permeability is mainly attributed to surface diffusion. Interestingly the B(mum)s for all adsorbates appear at the same volumetric adsorbed phase concentration, suggesting that the volume of adsorbed molecules may play an important role in the surface diffusion mechanism in activated carbon. (C) 2003 Elsevier Ltd. All rights reserved.

A new wavelet-based adaptive method for solving population balance equations

A new wavelet-based adaptive framework for solving population balance equations (PBEs) is proposed in this work. The technique is general, powerful and efficient without the need for prior assumptions about the characteristics of the processes. Because there are steeply varying number densities across a size range, a new strategy is developed to select the optimal order of resolution and the collocation points based on an interpolating wavelet transform (IWT). The proposed technique has been tested for size-independent agglomeration, agglomeration with a linear summation kernel and agglomeration with a nonlinear kernel. In all cases, the predicted and analytical particle size distributions (PSDs) are in excellent agreement. Further work on the solution of the general population balance equations with nucleation, growth and agglomeration and the solution of steady-state population balance equations will be presented in this framework. (C) 2002 Elsevier Science B.V. All rights reserved.

Method for determining the shear stress in cylindrical systems

We develop a method for determining the elements of the pressure tensor at a radius r in a cylindrically symmetric system, analogous to the so-called method of planes used in planar systems [B. D. Todd, Denis J. Evans, and Peter J. Daivis, Phys. Rev. E 52, 1627 (1995)]. We demonstrate its application in determining the radial shear stress dependence during molecular dynamics simulations of the forced flow of methane in cylindrical silica mesopores. Such expressions are useful for the examination of constitutive relations in the context of transport in confined systems.

An investigation of the thermal and tensile properties of PFA following γ-radiolysis

For some applications for fluoropolymers they must be subjected to high-energy radiation, e.g., when they are grafted with styrene using an irradiation method to produce fuel cell membranes or matrix supports for combinatorial chemistry. In some of these applications they may be subjected to mechanical stress or elevated temperature, so it is important to elucidate the effects of the radiolysis on these properties. In the present work the effect of gamma-radiolysis on the glass transition, melting behavior, and thermal stability of PFA has been studied as well as the effect of the radiolysis on the tensile properties of the polymer.

Cross-linking of PFA by electron beam irradiation

The effect of electron beam radiation on a perfluoroalkoxy (PFA) resin was examined using solid-state high-speed magic angle spinning F-19 NMR spectroscopy and FT-IR spectroscopy. Samples were prepared for analysis by subjecting them to electron beam radiation in the dose range 0.5-2.0 MGy at 633 K, which is above the crystalline melting temperature. The new structures were identified and include new saturated chain ends, short and long branches, unsaturated groups, and cross-links. The radiation chemical yield (G value) of new long branch points was greater than the G value of new chain ends, suggesting that cross-linking is the net radiolytic process. This conclusion was supported by an observed decrease in the crystallinity and an increase in the optical clarity of the polymer.

Adapted Gaussian basis sets for atoms from Li through Xe generated with the generator coordinate Hartree-Fock method

Utiliza-se o método coordenada geradora Hartree-Fock para gerar bases Gaussianas adaptadas para os átomos de Li (Z=3) até Xe (Z=54). Neste método, integram-se as equações de Griffin-Hill-Wheeler-Hartree-Fock através da técnica de discretização integral. Comparam-se as funções de ondas geradas neste trabalho com as funções de ondas Roothaan-Hartree-Fock de Clementi e Roetti (1974) e com outros conjuntos de bases relatados na literatura. Para os átomos estudados aqui, os erros em nossas energias totais relativos aos limites numéricos Hartree-Fock são sempre menores que 7,426 milihartree.

Transações com partes relacionadas : determinantes e impactos no desempenho das empresas

A literatura internacional que analisa os fatores impactantes das transações com partes relacionadas concentra-se no Reino Unido, nos EUA e no continente asiático, sendo o Brasil um ambiente pouco investigado. Esta pesquisa tem por objetivo investigar tanto os fatores impactantes dos contratos com partes relacionadas, quanto o impacto dessas transações no desempenho das empresas brasileiras. Estudos recentes que investigaram as determinantes das transações com partes relacionadas (TPRs), assim como seus impactos no desempenho das empresas, levaram em consideração as vertentes apresentadas por Gordon, Henry e Palia (2004): (a) de conflitos de interesses, as quais apoiam a visão de que as TPRs são danosas para os acionistas minoritários, implicando expropriação da riqueza deles, por parte dos controladores (acionistas majoritários); e (b) transações eficientes que podem ser benéficas às empresas, atendendo, desse modo, aos objetivos econômicos subjacentes delas. Esta pesquisa apoia-se na vertente de conflito de interesses, com base na teoria da agência e no fato de que o cenário brasileiro apresenta ter como característica uma estrutura de propriedade concentrada e ser um país emergente com ambiente legal caracterizado pela baixa proteção aos acionistas minoritários. Para operacionalizar a pesquisa, utilizou-se uma amostra inicial composta de 70 empresas com ações listadas na BM&FBovespa, observando o período de 2010 a 2012. Os contratos relacionados foram identificados e quantificados de duas formas, de acordo com a metodologia aplicada por Kohlbeck e Mayhew (2004; 2010) e Silveira, Prado e Sasso (2009). Como principais determinantes foram investigadas proxies para captar os efeitos dos mecanismos de governança corporativa e ambiente legal, do desempenho das empresas, dos desvios entre direitos sobre controle e direitos sobre fluxo de caixa e do excesso de remuneração executiva. Também foram adicionadas variáveis de controle para isolar as características intrínsecas das firmas. Nas análises econométricas foram estimados os modelos pelos métodos de Poisson, corte transversal agrupado (Pooled-OLS) e logit. A estimação foi feita pelo método dos mínimos quadrados ordinários (MQO), e para aumentar a robustez das estimativas econométricas, foram utilizadas variáveis instrumentais estimadas pelo método dos momentos generalizados (MMG). As evidências indicam que os fatores investigados impactam diferentemente as diversas medidas de TPRs das empresas analisadas. Verificou-se que os contratos relacionados, em geral, são danosos às empresas, impactando negativamente o desempenho delas, desempenho este que é aumentado pela presença de mecanismos eficazes de governança corporativa. Os resultados do impacto das medidas de governança corporativa e das características intrínsecas das firmas no desempenho das empresas são robustos à presença de endogeneidade com base nas regressões com variáveis instrumentais.

Avaliação do teste Quantiferon TB Gold in tube no diagnóstico de infecção latente pelo Mycobacterium tuberculosis em profissionais de saúde da atenção básica

Introdução: Os ensaios de liberação do interferon- γ (ELIG) surgiram como uma alternativa para o diagnóstico de infecção latente pelo Mycobacterium tuberculosis (ILTB). Neste estudo, nós comparamos o desempenho de um dos ELIG, teste Quantiferon TB Gold in tube – QFT, com a prova tuberculínica (PT) em dois pontos de corte (≥ 5 mm e ≥ 10 mm), em profissionais de saúde da atenção básica à saúde (ABS). Métodos: Estudo transversal realizado em profissionais de saúde da ABS de quatro capitais nacionais com alta incidência de TB. O resultado do teste QFT foi comparado com o resultado da PT nos pontos de corte ≥ 5mm e ≥ 10 mm. Resultados: Foram incluídos 632 profissionais de saúde. Ao considerar o ponto de corte ≥ 10 mm para a PT, a concordância entre QFT e a PT foi de 69% (k = 0,31) e para o ponto de corte ≥ 5 mm, a concordância entre os testes foi de 57% (k = 0,22). Devido a baixa concordância entre a PT e o QFT, nós avaliamos os possíveis fatores associados com a discordância entre eles. Ao comparar o grupo PT- / QFT- com o grupo PT+ / QFT-, no ponto de corte ≥ 5 mm, a idade entre 41-45 [OR = 2,70, IC 95%: 1,32-5,51] e 46-64 [OR = 2,04, IC 95%: 1,05-3,93], presença de cicatriz vacinal do BCG [OR = 2,72, IC 95%: 1,40-5,25] e trabalhar apenas na ABS [OR = 2,30, IC 95 %: 1,09-4,86] apresentaram associação estatística significativa. Para o ponto de corte ≥ 10 mm, a presença de cicatriz vacinal do BCG [OR = 2,26, IC 95%: 1,03-4,91], ter tido contato domiciliar com paciente portador de tuberculose ativa [OR = 1,72, IC 95%: 1,01-2,92] e ter feito a PT anteriormente [OR = 1,66, IC 95%: 1,05-2,62] revelaram associação estatística significativa. Curiosamente, a discordância observada no grupo PT- / QFT + não apresentou associação estatistica com nenhuma das variáveis consideradas, independentemente do ponto de corte da PT. Conclusões: Apesar de termos identificado que a vacina BCG contribuiu para a discordância entre os testes, as recomendações brasileiras para o início do tratamento da ILTB não devem ser alteradas devido as limitações do QFT.