Optimal radio labellings of complete m-ary trees

A radio labelling of a connected graph G is a mapping f : V (G) → {0, 1, 2, ...} such that | f (u) - f (v) | ≥ diam (G) - d (u, v) + 1 for each pair of distinct vertices u, v ∈ V (G), where diam (G) is the diameter of G and d (u, v) the distance between u and v. The span of f is defined as max_u, _{v ∈ V (G)} | f (u) - f (v) |, and the radio number of G is the minimum span of a radio labelling of G. A complete m-ary tree (m ≥ 2) is a rooted tree such that each vertex of degree greater than one has exactly m children and all degree-one vertices are of equal distance (height) to the root. In this paper we determine the radio number of the complete m-ary tree for any m ≥ 2 with any height and construct explicitly an optimal radio labelling.

Accounting education at a crossroad in 2010 and challenges facing accounting education in Australia

Of the various reports released in 2010, two purport to examine the state of accounting education in Australia. These are Accounting Education at a Crossroad in 2010 and Challenges Facing Accounting Education in Australia. Both were released as collaborations of the leading academic organisation, the Accounting and Finance Association of Australia and New Zealand (AFAANZ) or professional accounting bodies in Australia including the Institute of Chartered Accountants in Australia (ICAA), the Institute of Public Accountants (IPA),1 and Certified Practising Accountants of Australia (CPA Australia). As their titles imply, the main thrust of these reports is to examine the challenges facing accounting education in Australian universities and, as such, they act as the input for this AE Briefing. The main challenges articulated in these reports portray a sector suffering from the combined pressure of a large international student enrolment, high student-to-staff ratios, an inadequate funding model, and an ageing academic staff profile. By way of commentary, we suggest that, if these gloomy circumstances continue to develop unabated, then the future for the sector will play out as a ‘perfect storm’2 with the sector suffering on-going troubled development.

Design and analysis of a multilayer localized surface plasmon resonance graphene biosensor

This paper describes a multilayer localized surface plasmon resonance (LSPR) graphene biosensor that includes a layer of graphene sheet on top of the gold layer, and the use of different coupled configuration of a laser beam. The study also investigates the enhancement of the sensitivity and detection accuracy of the biosensor through monitoring biomolecular interactions of biotin-streptavidin with the graphene layer on the gold thin film. Additionally, the role of thin films of gold, silver, copper and aluminum in the performance of the biosensor is separately investigated for monitoring the binding of streptavidin to the biotin groups. The performance of the LSPR graphene biosensor is theoretically and numerically assessed in terms of sensitivity, adsorption efficiency, and detection accuracy under varying conditions, including the thickness of biomolecule layer, number of graphene layers and operating wavelength. Enhanced sensitivity and improved adsorption efficiency are obtained for the LSPR graphene biosensor in comparison with its conventional counterpart; however, detection accuracy under the same resonance condition is reduced by 5.2% with a single graphene sheet. This reduction in detection accuracy (signal to noise ratio) can be compensated for by introducing an additional layer of silica doped B2O3 (sdB2O3) placed under the graphene layer. The role of prism configuration, prism angle and the interface medium (air and water) is also analyzed and it is found that the LSPR graphene biosensor has better sensitivity with triangular prism, higher prism angle, lower operating wavelength and larger number of graphene layers. The approach involves a plot of a reflectivity curve as a function of the incidence angle. The outcomes of this investigation highlight the ideal functioning condition corresponding to the best design parameters.

Impact of personalized recommendation and social comparison on learning behaviours and outcomes

ELearning suffers from the lack of face-to-face interaction and can deprive learners from the benefits of social interaction and comparison. In this paper we present the results of a study conducted for the impact of social comparison. The study was conducted by collecting students’ engagement with an eLearning tool, the attendance, and grades scored by students at specific milestones and presented these metrics to students as feedback using Kiviat charts. The charts were complemented with appropriate recommendations to allow them to adapt their study strategy and behaviour. The study spanned over 4 semesters (2 with and 2 without the Kiviats) and the results were analysed using paired T tests to test the pre and post results on topics covered by the eLearning tool. Survey questionnaires were also administered at the end for qualitative analysis. The results indicated that the Kiviat feedback with recommendation had positive impact on learning outcomes and attitudes.

Learning Boltzmann distance metric for face recognition

We introduce a new method for face recognition using a versatile probabilistic model known as Restricted Boltzmann Machine (RBM). In particular, we propose to regularise the standard data likelihood learning with an information-theoretic distance metric defined on intra-personal images. This results in an effective face representation which captures the regularities in the face space and minimises the intra-personal variations. In addition, our method allows easy incorporation of multiple feature sets with controllable level of sparsity. Our experiments on a high variation dataset show that the proposed method is competitive against other metric learning rivals. We also investigated the RBM method under a variety of settings, including fusing facial parts and utilising localised feature detectors under varying resolutions. In particular, the accuracy is boosted from 71.8% with the standard whole-face pixels to 99.2% with combination of facial parts, localised feature extractors and appropriate resolutions.

Effect of thermal adaptation on outdoor comfort perception

Thermal comfort in outdoor places has proven to have a strong relationship with their users’ attendance and behaviour [1]. Creating comfortable places is therefore to be considered a crucial part of the design process, as taking it into consideration help increasing the social integration between people and therefore fosters sustainability within cities [2]. With the increasing number of migrants within global cities, a new challenge has been facing thermal comfort studies. This challenge is related to the different cultural and climatic origins of those migrants and how they can adapt to the new climatic conditions they are to move in. This paper aims to explore the impact of thermal comfort adaptation on users’ thermal perception in multicultural cities. Consequently, a quantitative field study is applied in Melbourne city, Australia in order to investigate peoples’ outdoor thermal comfort. The analyses were based upon the measurement of climatic parameters that were monitored simultaneously with a questionnaire to determine users’ thermal comfort perception in relation to their time spent in the city. The findings of thermal comfort investigations could be applied into improving the quality of urban areas within global cities and therefore promote the integration within individuals in those societies.

Composite yarns fabricated from continuous needleless electrospun nanofibers

In this work, a spinning metal wire collector was employed to continuously collect polyacrylonitrile (PAN) nanofibers produced by a disc fiber generator and coil them around a polyethylene terephthalate (PET) yarn. The obtained composite yarns exhibited a core/shell structure (PET yarn/PAN nanofibers) with nanofibers orderly arranged on the surface of the PET yarn. The electric field analysis showed that the position of metal wire had insignificant effect on the formed electric field and high intensity electric field was formed at the disc circumferential area, which provided a constant electric field for the production of uniform nanofibers. The spinning solution, spinning speed of metal wire, and winding speed were found to play an important role in producing good quality nanofiber yarns, in terms of morphology, strength, and productivity. Pure nanofiber yarns were obtained after dissolving the core yarns in a proper solvent. This method has shown potential for the mass production of nanofiber yarns for industrial applications.

Structure of the electrical double layer at aqueous gold and silver interfaces for saline solutions

We report the structure of the electrical double layer, determined from molecular dynamics simulations, for a range of saline solutions (NaCl, KCl, MgCl2 and CaCl2) at both 0.16 and 0.60molkg(-1) on different facets of the gold and silver aqueous interfaces. We consider the Au/Ag(111), native Au/Ag(100) and reconstructed Au(100)(5×1) facets. For a given combination of metallic surface and facet, some variations in density profile are apparent across the different cations in solution, with the corresponding chloride counterion profiles remaining broadly invariant. All density profiles at the higher concentration are predicted to be very similar to their low-concentration counterparts. We find that each electrolyte responds differently to the different metallic surface and facets, particularly those of the divalent metal ions. Our findings reveal marked differences in density profiles between facets for a given metallic interface for both Mg(2+) and Ca(2+), with Na(+) and K(+) showing much less distinction. Mg(2+) was the only ion for which we find evidence of materials-dependent differences in interfacial solution structuring between the Ag and Au.

Water-soluble acrylamide sulfonate copolymer for inhibiting shale hydration

Here we report a water-soluble acrylamide sulfonate copolymer for inhibiting shale hydrate formation. The copolymer, denoted as PANAA, was synthesized via copolymerization of acrylamide (AM), N,N-diallylbenzylamine (NAPA), acrylic acid (AA), and 2-(acrylamide)-2-methylpropane-1-sulfonic acid (AMPS). The performance of this new water-soluble copolymer for inhibiting shale hydration was investigated for the first time. The retention ratio of apparent viscosity of 2 wt % PANAA solution can reach 61.6% at 130 C and further up to 72.2% with 12 000 mg/L NaCl brine. The X-ray diffraction studies show that the addition of copolymer PANAA (5000 mg/L), in combination with a low loading of KCl (3 wt %), remarkably reduces the interlayer spacing of sodium montmorillonite (Na-MMT) in water from 19.04 to 15.65 Å. It has also found that these copolymer solutions, blending with KCl, can improve the retention of indentation hardness from 22% to 74% and increase the antiswelling ratio up to 84%. All results have demonstrated that the PANAA copolymer not only has excellent temperature-resistance and salt-tolerance but also exhibits a significant effect on inhibiting the hydration of clays and shale. © 2014 American Chemical Society.

Facile preparation and thermoelectric properties of Bi₂Te₃ based alloy nanosheet/PEDOT:PSS composite films

Bi2Te3 based alloy nanosheet (NS)/poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) composite films were prepared separately by spin coating and drop casting techniques. The drop cast composite film containing 4.10 wt % Bi2Te3 based alloy NSs showed electrical conductivity as high as 1295.21 S/cm, which is higher than that (753.8 S/cm) of a dimethyl sulfoxide doped PEDOT:PSS film prepared under the same condition and that (850-1250 S/cm) of the Bi2Te3 based alloy bulk material. The composite film also showed a very high power factor value, ∼32.26 μWm(-1) K(-2). With the content of Bi2Te3 based alloy NSs increasing from 0 to 4.10 wt %, the electrical conductivity and Seebeck coefficient of the composite films increase simultaneously.

The hot working flow stress and microstructure in magnesium AZ31

The evolution of flow stress and microstructure for wrought magnesium alloy AZ31 was characterised using torsion and compression testing. Temperatures ranging between 300°C and 450°C and strain rates between 0.001s^-1 and 1s^-1, were employed. Constitutive equations were developed for the flow stress at a strain of 1.0 for torsion, and 0.6 for compression. The flow stress was found to be strongly dependent on deformation mode at low strains. This can be explained in terms of the influence of the deformation accommodating processes of prismatic slip and dynamic recrystallisation (DRX). At higher strains, when the change in flow stress with strain is lower, the flow stress was relatively insensitive to deformation mode. Optical microscopy carried out on torsion samples quenched after twisting to strains between 0.2 and 2 revealed dynamically recrystallised (DRX) grains situated on pre-existing grain boundaries. The average grain size was reduced from 22.5μm down to 7.3 μm after a strain of 2, with the initial grain size being halved after a strain of 0.5.

Influence of price discounts and skill-building strategies on purchase and consumption of healthy food and beverages: outcomes of the Supermarket Healthy Eating for Life randomized controlled trial

BACKGROUND: Fiscal strategies are increasingly considered upstream nutrition promotion measures. However, few trials have investigated the effectiveness or cost effectiveness of pricing manipulations on diet in real-world settings. OBJECTIVE: We assessed the effects on fruit, vegetable, and beverage purchasing and consumption of a 20% price-reduction intervention, a tailored skills-based behavior-change intervention, and a combined intervention compared with a control condition. DESIGN: The Supermarket Healthy Eating for Life trial was a randomized controlled trial conducted over 3 mo [baseline (time 1) to postintervention (time 2) with a 6-mo follow-up (time 3)]. Female primary household shoppers in Melbourne, Australia, were randomly assigned to a 1) skill-building (n = 160), 2) price-reduction (n = 161), 3) combined skill-building and price-reduction (n = 160), or 4) control (n = 161) group. Supermarket transaction data and surveys were used to measure the following study outcomes: fruit, vegetable, and beverage purchases and self-reported fruit and vegetable consumption at each time point. RESULTS: At 3 mo (time 2), price reduction-alone participants purchased more total vegetables and frozen vegetables than did controls. Price reduction-alone and price reduction-plus-skill-building participants purchased more fruit than did controls. Relative to controls, in the price-reduction group, total vegetable consumption increased by 233 g/wk (3.1 servings or 15% more than at baseline), and fruit purchases increased by 364 g/wk (2.4 servings; 35% more than at baseline). Increases were not maintained 6 mo postintervention (time 3). Price reduction-alone participants showed a tendency for a slight increase in fruit consumption at time 2 (P = 0.09) that was maintained at time 3 (P = 0.014). No intervention improved purchases of bottled water or low-calorie beverages. CONCLUSIONS: A 20% price reduction in fruit and vegetables resulted in increased purchasing per household of 35% for fruit and 15% for vegetables over the price-reduction period. These findings show that price modifications can directly increase produce purchases. The Supermarket Healthy Eating for Life trial was registered at Current Controlled Trials Registration as ISRCTN39432901.

A modelling study of transient, buoyancy-driven exchange flow over a descending barrier

Results are presented from a series of model studies of the transient exchange flow resulting from the steady descent of an impermeable barrier separating initially-quiescent fresh and saline water bodies having density ρ0 and ρ0 + (Δρ)0, respectively. A set of parametric laboratory experiments has been carried out (i) to determine the characteristic features of the time-dependent exchange flow over the barrier crest and (ii) to quantify the temporal increase in the thickness and spatial extent of the brackish water reservoir formed behind the barrier by the outflowing, partly-mixed saline water. The results of the laboratory experiments have been compared with the predictions of a theoretical model adapted from the steady, so-called maximal exchange flow case and good qualitative agreement between theory and experiment has been demonstrated. The comparisons indicate that head losses of between 7% and 3% are applicable to the flow over the ridge crest in the early and late stages, respectively, of the barrier descent phase, with these losses being attributed to mixing processes associated with the counterflowing layers of fresh and saline water in the vicinity of the ridge crest. The experimental data show (and the theoretical model predictions confirm) that (i) the dimensionless time of detection tdet (g′/Hb)1/2 of the brackish water pool fed by the dense outflow increases (at a given distance from the barrier) with increasing values of the descent rate parameter g'Hb/(dhb/dt)2 and (ii) the normalised thickness δ(x,t)/Hb of the pool at a given reference station increases monotonically with increasing values of the modified time (t - tdet)/(Hb/g′) 1/2, with the rate of thickening decreasing with increasing values of the descent rate parameter g'Hb (dhb/dt)2. Here, g′ = (g/ρ0) (Δρ)0 is the modified gravitational acceleration, Hb is the mean depth of the water and dhb/dt denotes the rate of descent of the barrier height hb with elapsed time t after the two water bodies are first brought into contact. © 2004 Kluwer Academic Publishers.

Change of school in early adolescence and adverse obesity-related dietary behavior: a longitudinal cohort study, Victoria, Australia, 2013-2014

INTRODUCTION: Environments that facilitate energy-dense, nutrient-poor diets are associated with childhood obesity. We examined the effect of a change of school environment on the prevalence of obesity and related dietary behavior in early adolescence. METHODS: Fifteen schools in Victoria, Australia, were recruited at random from the bottom 2 strata of a 5-level socioeconomic scale. In 9 schools, students in grade 6 primary school transitioned to different schools for grade 7 secondary school, whereas in 6 schools, students remained in the same school from grade 6 to grade 7. Time 1 measures were collected from students (N = 245) in grade 6 (aged 11-13 y). Time 2 data were collected from 243 (99%) of the original cohort in grade 7. Data collected were dietary recall self-reported by students via questionnaire, measured height and weight of students, and aspects of the school food environment via school staff survey. Comparative and mixed model regression analyses were conducted. RESULTS: Of 243 students, 63% (n = 152) changed schools from time 1 to time 2, with no significant difference in weight status. Students who changed schools reported an increase in purchases of after-school snack food, greater sweetened beverage intake, fewer fruit-and-vegetable classroom breaks, and less encouragement for healthy eating compared with students who remained in the same school. School staff surveys showed that more primary than secondary schools had written healthy canteen policies and fewer days of canteen or food services operation. CONCLUSION: A change of school environment has negative effects on children's obesity-related dietary behavior. Consistent policy is needed across school types to support healthy eating in school environments.

Physical activity, television viewing time and 12 year changes in waist circumference

PURPOSE: Both moderate-to-vigorous physical activity (MVPA) and sedentary behavior can be associated with adult adiposity. Much of the relevant evidence is from cross-sectional studies or from prospective studies with relevant exposure measures at a single time point prior to weight gain or incident obesity. This study examined whether changes in MVPA and television (TV) viewing time are associated with subsequent changes in waist circumference, using data from three separate observation points in a large population-based prospective study of Australian adults. METHODS: Data were obtained from the Australian Diabetes, Obesity and Lifestyle study collected in 1999-2000 (baseline), 2004-05 (Wave 2), and 2011-12 (Wave 3). The study sample consisted of adults aged 25 to 74 years at baseline who also attended site measurement at three time points (n=3261). Multilevel linear regression analysis examined associations of initial five-year changes in MVPA and TV viewing time (from baseline to Wave 2) with 12-year change in waist circumference (from baseline to Wave 3), adjusting for well-known confounders. RESULTS: As categorical predictors, increases in MVPA significantly attenuated increases in waist circumference (p for trend< 0.001). TV viewing time change was not significantly associated with changes in waist circumference (p for trend =0.06). Combined categories of MVPA and TV viewing time changes were predictive of waist circumference increases; compared to those who increased MVPA and reduced TV viewing time, those who reduced MVPA and increased TV viewing time had a 2cm greater increase in waist circumference (p=0.001). CONCLUSION: Decreasing MVPA emerged as a significant predictor of increases in waist circumference. Increasing TV viewing time was also influential, but its impact was much weaker than MVPA.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially.