Amplificador integrador com ganho programável por largura de pulso

This work deals with the research and development of a Pulse Width Programmable Gain Integrating Amplifier. Two Pulse Width Programmable Gain Amplifier architectures are proposed, one based on discrete components and another based on switched capacitors. From the operating requirements defined for the study, parameters are defined and simulations are carried out to validate the architecture. Subsequently, the circuit and the software are developed and tested. It is performed the evaluation of the circuits regarding the two proposed architectures, and from that, an architecture is selected to be improved, aiming the development of an integrated circuit in a future work.

Situações geográficas em movimento nas praias da área de proteção ambiental de Jenipabu: das ideologias ambientais ao território usado pelo circuito inferior do turismo

The Área de Proteção Ambiental de Jenipabu was created by Decreto 12,620/95, covering the beaches of Redinha Nova, Santa Rita and Jenipabu and Campina communities in the municipality of Extremoz, and Africa community fragment, in Natal. This protected area was created in the context of expansion of tourism in Rio Grande do Norte, in the 1990s, in which PRODETUR investments made possible the installation of infrastructure equipment, mainly in the Via Costeira and Ponta Negra beach in Natal by inserting it in the sun and sea tourism route to Northeast Brazil. In this context the beach Jenipabu in Extremoz, became one of the main attractions for those visiting Natal, due to the natural elements of its landscape, its dune field, which is offered to tourists the buggy ride. In December 1994 the excess buggy rides held in these dunes led to IBAMA ban their access to buggy for carrying out environmental study. This measure resulted in the creation of APAJ in 1995 with the goal of ordering the use and occupation to protect its ecosystems, especially the dunes, the disordered tourism. Given this context, this work aims to analyze the process of creating the APAJ and changes in the geographic space of its beaches, Redinha Nova, Santa Rita and Jenipabu, from the materialization of tourism process, as well as their implications for its residents. To this end, this paper presents a discussion of environmental currents that developed in the western portion of the globe, focusing on the need to regulate small areas of the national territory in protected areas, and an analysis of public policies that enabled the implementation tourism in APAJ as well as the laws and decrees governing the process of creation and management. Using the theory of circuits of urban economy of the Santos (2008) to analyze the territory used by tourism on the beaches of Redinha Nova, Santa Rita and Jenipabu, showing their dependent relationship with the territory used by the upper circuit on the Via Costeira and in the Ponta Negra beach and its influence on the APAJ urbanization process. Ending with the analysis of the influence of the materialization of tourism in the transformation of stocks ways of being-in-space and space-be of the Santa Rita and Jenipabu beaches in each geographical situation of APAJ among the first decades of the twentieth century to the 2014. Fieldwork was conducted between 2012 and 2014, performing actions of qualitative interviews with older residents of Santa Rita and Jenipabu beaches, interviews with structured questionnaire with merchants of APAJ and collecting GPS points trades, identifying and mapping the territory used by the lower circuit in APAJ beaches.

Mecanismo de tolerância a falhas através de escalonamento para uma arquitetura reconfigurável de grão grosso

The continuous evolution of integrated circuit technology has allowed integrating thousands of transistors on a single chip. This is due to the miniaturization process, which reduces the diameter of wires and transistors. One drawback of this process is that the circuit becomes more fragile and susceptible to break, making the circuit more susceptible to permanent faults during the manufacturing process as well as during their lifetime. Coarse Grained Reconfigurable Architectures (CGRAs) have been used as an alternative to traditional architectures in an attempt to tolerate such faults due to its intrinsic hardware redundancy and high performance. This work proposes a fault tolerance mechanism in a CGRA in order to increase the architecture fault tolerance even considering a high fault rate. The proposed mechanism was added to the scheduler, which is the mechanism responsible for mapping instructions onto the architecture. The instruction mapping occurs at runtime, translating binary code without the need for recompilation. Furthermore, to allow faster implementation, instruction mapping is performed using a greedy module scheduling algorithm, which consists of a software pipeline technique for loop acceleration. The results show that, even with the proposed mechanism, the time for mapping instructions is still in order of microseconds. This result allows that instruction mapping process remains at runtime. In addition, a study was also carried out mapping scheduler rate. The results demonstrate that even at fault rates over 50% in functional units and interconnection components, the scheduler was able to map instructions onto the architecture in most of the tested applications.

Projeto de absorvedores de micro-ondas integrados com superfícies seletivas em frequência

Considering the fact that, the use of wireless communication systems has grown too fast, investigations concerning absorbers of electromagnetic waves has called closer attention of researchers. It is applicable from indoor systems to military applications. Paralleling with this growth, some extremely relevant investigations through Frequency Selective Surfaces (FSS) allows its filter property to be applicable in several systems, for example: reflector antennas, band-pass radomes, and absorbers, which are the main objective of this work. Therefore, the main goal of this work concerns to design micro-waves absorbers through FSS. Thus, the methodology consists basically in two steps: the first step concerns a theoretical and numerical analysis of the structures involved in the process of absorption, the second step, the analysis of the cascaded structures. In order to carry out the analysis, the Equivalent Circuit Method will be used. This method provides characteristics of transmission from the structure, for a plane wave incidence and it requires an extremely limited computing resource in relation if compared to full wave analyses method. Hence, it is useful to allow fast predictions of the development of the structures. Furthermore, a spreading matrix will be used in order to cascade the conductive FSS and the resistive FSS achieving absorption characteristics in the designed band. The experimental results used for the analysis are found in the literature due to the difficulty of building soon, given that it is not a simple construction technique. To conclude, a mathematical development through the Equivalent Circuit Method of a FSS modeling with cross-dipole geometry and a resistive FSS will be presented, as well as the cascading involving the two structures. The same setting is used with a square loop geometry. Besides it, the next steps will be discussed in the conclusion.

Conversações políticas no youtube: junho de 2013 e circulação de sentidos nos comentários do vídeo “globo e os protestos”

This re search analyzes the talks dynamics about policy established in YouTube symbolic space. We are interested in examining the way in which the commentators of the video " Globo e os Protestos " articulated in the field intended for comments, a public space directed to the dissemination and circulation of meanings about policy issues. The video studied was published by PC Siqueira and Diego Quint eiro , during the June 2013 protests in Br azil, to direct the political understanding of the movement lived in that period. According to them, the protests had left political position and therefore the protesters should reject the coverage by TV Globo (a comunication vehicle with ideals of right) and allow the participation of political parties linked to the ideological left spectrum. This narrative generated empathy and controversy betwe en commentators, which produced in the comments, an intense argumentative process about these theses (right and left). To understand the phenomenon, we conducted an exploratory qualitative research, the main methodological procedure was a ethnomethodological discourse analysis. We seek the observation of the ways in which the commentators es tablished talks about politics in the comments space, for, thereafter , organize categories of analysis based on identified discursive recurrences. The empirical reflections are supported from discussions about the YouTube potential, while digital media com prising massive strategies and while articulating space in the engagement of individuals in political issues; also confront the aspects involved in the conversation practices that results in sociability dynamics and , especially , in conflict, on the socio - t echnical networks; and finally, we propose a reflection about the circuit actuation in which the people take ownership and realize new readings about the products received. Concluding that the use of digital media , such as YouTube, has caused significant c hanges in the forms of production and reception of symbolic products and ways in which people participate in political issues concerning life in society.

Metodologia de estimação de estados para tratamento de medições errôneas e registros não sincronizados em algoritmos de localização de faltas em linhas de transmissão

The performance of algorithms for fault location i n transmission lines is directly related to the accuracy of its input data. Thus, fa ctors such as errors in the line parameters, failures in synchronization of oscillographic recor ds and errors in measurements of voltage and current can significantly influence the accurac y of algorithms that use bad data to indicate the fault location. This work presents a new method ology for fault location in transmission lines based on the theory of state estimation in or der to determine the location of faults more accurately by considering realistic systematic erro rs that may be present in measurements of voltage and current. The methodology was implemente d in two stages: pre-fault and post- fault. In the first step, assuming non-synchronized data, the synchronization angle and positive sequence line parameters are estimated, an d in the second, the fault distance is estimated. Besides calculating the most likely faul t distance obtained from measurement errors, the variance associated with the distance f ound is also determined, using the errors theory. This is one of the main contributions of th is work, since, with the proposed algorithm, it is possible to determine a most likely zone of f ault incidence, with approximately 95,45% of confidence. Tests for evaluation and validation of the proposed algorithm were realized from actual records of faults and from simulations of fictitious transmission systems using ATP software. The obtained results are relevant to show that the proposed estimation approach works even adopting realistic variances, c ompatible with real equipments errors.

Proposta de um processador multithreading com características de previsibilidade

The real-time embedded systems design requires precise control of the passage of time in the computation performed by the modules and communication between them. Generally, these systems consist of several modules, each designed for a specific task and restricted communication with other modules in order to obtain the required timing. This strategy, called federated architecture, is already becoming unviable in front of the current demands of cost, required performance and quality of embedded system. To address this problem, it has been proposed the use of integrated architectures that consist of one or few circuits performing multiple tasks in parallel in a more efficient manner and with reduced costs. However, one has to ensure that the integrated architecture has temporal composability, ie the ability to design each task temporally isolated from the others in order to maintain the individual characteristics of each task. The Precision Timed Machines are an integrated architecture approach that makes use of multithreaded processors to ensure temporal composability. Thus, this work presents the implementation of a Precision Machine Timed named Hivek-RT. This processor which is a VLIW supporting Simultaneous Multithreading is capable of efficiently execute real-time tasks when compared to a traditional processor. In addition to the efficient implementation, the proposed architecture facilitates the implementation real-time tasks from a programming point of view.

Implementação de uma matriz de neurônios dinamicamente reconfigurável para descrição de topologias de redes neurais artificiais multilayer perceptrons

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Implementação de uma matriz de neurônios dinamicamente reconfigurável para descrição de topologias de redes neurais artificiais multilayer perceptrons

The Artificial Neural Networks (ANN), which is one of the branches of Artificial Intelligence (AI), are being employed as a solution to many complex problems existing in several areas. To solve these problems, it is essential that its implementation is done in hardware. Among the strategies to be adopted and met during the design phase and implementation of RNAs in hardware, connections between neurons are the ones that need more attention. Recently, are RNAs implemented both in application specific integrated circuits's (Application Specific Integrated Circuits - ASIC) and in integrated circuits configured by the user, like the Field Programmable Gate Array (FPGA), which have the ability to be partially rewritten, at runtime, forming thus a system Partially Reconfigurable (SPR), the use of which provides several advantages, such as flexibility in implementation and cost reduction. It has been noted a considerable increase in the use of FPGAs for implementing ANNs. Given the above, it is proposed to implement an array of reconfigurable neurons for topologies Description of artificial neural network multilayer perceptrons (MLPs) in FPGA, in order to encourage feedback and reuse of neural processors (perceptrons) used in the same area of the circuit. It is further proposed, a communication network capable of performing the reuse of artificial neurons. The architecture of the proposed system will configure various topologies MLPs networks through partial reconfiguration of the FPGA. To allow this flexibility RNAs settings, a set of digital components (datapath), and a controller were developed to execute instructions that define each topology for MLP neural network.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Análise computacional do desempenho de estratégia para o religamento controlado de linhas de transmissão

The search for mitigation solutions, with respect to the effects of overvoltages linked to the energization and reclosing maneuvers of transmission lines include a challenging subject with strong impact on the insulation coordination of electrical systems. Although the recognition of classical and commercial proposals to mitigate these phenomena, other possibilities are certainly still worthwhile highlighting and investigations. In this context, the present work is grounded in the exposure of the physical and mathematical foundations of a strategy based on controlled switchings, whose moments to the line reclosing are pre-programmed. The computational evaluation of the effectiveness of the methodology is made using the ATP simulator, which are studies in a typical electrical system subjected to the action of short-circuits fallowed by shutdowns and subsequent reclosing, under the action of technology here focused and lack thereof.

Co-simulación HW/SW en Raspberry Pi

En el mundo de la simulación existen varios tipos de sistemas reales, entre los que se encuentran los sistemas de eventos discretos. Para poder simular estos sistemas se pueden utilizar, entre otras, herramientas basadas en el formalismo DEVS (Discrete EVents system Specification), como la utilizada en este proyecto: xDEVS. La simulación posee una importancia muy elevada en campos como la educación y la ciencia, y en ocasiones es necesario incluir datos del medio físico o sacar información al exterior del simulador. Por ello es necesario contar con herramientas que puedan realizar simulaciones utilizando sensores, actuadores, circuitos externos, etc., o lo que es lo mismo, que puedan realizar co-simulaciones entre software y hardware. De esta forma se puede facilitar el desarrollo de sistemas por medio de modelado y simulación, pudiendo extraer el hardware gradualmente y analizar los resultados en cada etapa. Este proyecto es de carácter incremental, y trata de extender la funcionalidad de la plataforma xDEVS para poder realizar co-simulaciones entre hardware y software sobre una Raspberry Pi. Para ello se van a utilizar circuitos lógicos como hardware externo y se enlazarán al simulador a través de ficheros de dispositivo, gestionados por módulos del kernel de Linux. Como caso de estudio se desarrolla la co-simulación entre hardware y software completa de un ascensor de siete plantas para mostrar el uso y funcionamiento en xDEVS, extrayendo los circuitos integrados de uno en uno.

Análise das principais variáveis na flotação industrial do complexo de mineração de Tapira - MG

Faced with an agribusiness expansion scenario and the increase in fertilizer consumption due to the exponential growth of the population, it is necessary to make better use of existing reserves, by obtaining products of better quality and in adequate quantities to meet demand national. In Tapira Mining Complex, Vale Fertilizantes, the phosphate concentrate is produced with content of 35.0% P2O5 from ore with content of about 8.0% P2O5, which are intended to supply Complex Industrial Uberaba and Araxá Minero Chemical Complex for the production of fertilizers. The industrial flotation step responsible for the recovery of P2O5 and hence the viability of the business is divided into the crumbly, grainy and ultrathin circuits, and, friable and granular concentrate comprise the conventional concentrated. Today only 14.7% of the mass which feeds the mill product becomes, the remainder being considered losses in the process, and the larger mass losses are located in the waste of flotation, representing 42.3%. From 2012 to 2014, the daily global mass recovery processing plants varied from 12.4 to 15.9% while the daily metallurgical recovery of P2O5 from 48.7 to 82.4%. By the degree of variability, it appears that the plant operated under different conditions. Seen this, this study aimed to analyze the influence of operational and process variables in P2O5 mass and metallurgical recoveries of industrial flotation circuits of grainy, crumbly and ultrathin. And besides was made an analysis of the effect of ore variables, as degrees, hardnesse and the ore front 02 percentage, in global recoveries of processing plant and the effect of dosages of reagents in the recoveries obtained from the bench flotation using the experimental design methodology. All work was performed using the historical database of Vale Fertilizantes of Tapira-MG, where all independent variables were dimensionless as the experimental range used. To make the statistical analysis it used the response surface technique and the values of the independent variables that maximize recoveries were found by canonical analysis. In the study of industrial flotation circuit crispy were obtained from 41.3% mass recovery and 91.3% metallurgical recovery P2O5, good values for the circuit, and the highest recoveries occur for solids concentration of the new flotation power between 45 and 50%, which values are assigned to the residence time of the pulp in cells and industrial flotation columns. The greater the number of ore heaps resumed on the higher the mass recovery, but in this scenario flotation becomes unstable because there is enormous weight variation in the feed. Higher recoveries are obtained for mass depressant dosage exceeding 120 g / t for synthetic collector dosage of 11.6%. In the study of industrial flotation circuit of the granulate were obtained 28.3% to 79.4% mass recovery and metallurgical recovery of P2O5 being considered good values for the circuit. Higher recoveries are obtained when the front ore 02 percentage is above 90%, because the ore of this front have more clear apatite. Likewise recoveries increase when the level of pulp rougher step is highest due to the high mass of circulating step receives loads. In the analysis of industrial flotation circuit of the ultrafine were obtained 23.95% of mass recovery, and the same is maximized to depressant dosage and the top collector 420 and 300 g / t, respectively. The analysis of the influence of variables ore, it was observed that higher recoveries are obtained for ores with P2O5 content above 8.0%, Fe2O3 content in the order of 28% forward and 02 of ore percentage of 83%. Hard ore percentage has strong influence on recoveries due to mass division in the circuit that is linked to this variable. However, the hard ore percentage that maximizes recoveries was very close to the design capacity of the processing plant, which is 20%. Finally, the study of the bench flotation, has noted that in friable and granular circuits the highest recoveries are achieved for a collector dosage exceeding 250 g / t and the simultaneous increase of collector dosage and synthetic collector percentage contributes to the increase recovery in the flotation, but this scenario is suitable to produce a concentrate poorer in terms of P2O5 content, showing that higher recovery is not always the ideal scenario. Thus, the results show the values of variables that provide higher recoveries in the flotation and hence lower losses in the waste.

La formación de los docentes de educación física : Aportes desde las estrategias de elección de la oferta de capacitación

La ponencia presenta los resultados de la tesis de maestría denominada "Las elecciones de los docentes de Educación Física de escuela secundaria frente a la oferta de capacitación, en La Plata (2007 - 2009)", cuyo objetivo fue analizar la elección de la capacitación desde la perspectiva de los actores, considerando la incidencia de sus contextos y la interacción con las culturas escolares en la que conviven. El enfoque conceptual- metodológico se enmarcó en la perspectiva del saber docente y su desarrollo profesional, en interacción con las características de las políticas de formación docente continua. En función de ello, se realizaron entrevistas a docentes de Educación Física, a responsables de la gestión de acciones de capacitación en el distrito de La Plata, y se analizaron los documentos que regulan la capacitación en la provincia de Buenos Aires. La ponencia explica las estrategias de elección de la capacitación de los docentes de Educación Física, a través de las siguientes dimensiones de análisis: I) qué demuestran las políticas de capacitación en clave histórica; II) la valorización del saber docente en las políticas de capacitación; III) el triunfo de la lógica del puntaje sobre la lógica de la acreditación; IV) la capacitación y las particularidades del saber en Educación Física, V) los formatos, los circuitos y los destinatarios de la capacitación