Equipamentos hospitalares de diagnóstico por imagem, seu estudo, projeto e implementação

Neste trabalho foi desenvolvido um estudo detalhado dos equipamentos de imagiologia médica, que recorrem ao uso de radiação-X, bem como da ressonância magnética. No seguimento deste estudo foram realizadas diversas atividades com equipamentos reais, desde instalações, reparações, manutenções, até ao seu desmantelamento. Este tipo de atividade permitiu ter uma melhor perceção do funcionamento de cada equipamento e o tipo de trabalho que é realizado por um engenheiro eletrotécnico na PHILIPS no sector healthcare. Durante estas atividades foi possível fazer um estudo da qualidade de imagem, em termos de fatores geométricos, em que foi estudada a distorção, a ampliação e a penumbra de uma imagem. Todos estes parâmetros foram alvos de estudo de forma a poder obter imagens com grande qualidade, mas sem que seja comprometida a saúde do doente, devido à elevada exposição de radiação que corpo humano pode absorver. Este estudo tem como intuito perceber como é que a variação de certos parâmetros irá alterar a qualidade da imagem. Desta forma pretende-se perceber como podem ser calibrados os equipamentos de diagnóstico por imagem, para que o técnico de diagnóstico e terapêutica apenas tenha de indicar qual a parte do corpo humano a radiografar, sendo que a máquina se coloca automaticamente nos parâmetros pré-definidos sem qualquer intervenção humana.

Establishing the main Guidelines for Cast Steel to Produce Truck Parts

Este trabalho foi realizado na Scania CV AB e teve como principal objectivo estabelecer uma diretriz sobre a possível utilização de aços vazados. Existe uma grande necessidade na realização deste trabalho, de forma a apoiar os engenheiros de projecto no seu processo de selecção dos materiais mais adequados, para produzir componentes mais leves e de elevado desempenho. Esta diretriz apresenta informação relacionada com propriedades mecânicas, processos de fundição, vazabilidade, tipologia de defeitos, tratamentos térmicos, soldabilidade e tratamentos superficiais dos aços vazados. Este trabalho foi limitado, na seleção de materiais para componentes do camião, a aços vazados que poderiam ser aplicados em dois componentes específicos: um componente estrutural da carroçaria sujeito a esforços de fadiga e a um colector de gases de combustão, sujeito a fluência, oxidação, fadiga por corrosão, fadiga-térmica e fadiga-mecânica. Foi realizado um benchmark focado nestes dois componentes de forma a saber que materiais são utilizados de momento por outras empresas concorrentes. Foi realizada ainda uma análise sobre possíveis materiais que possam ser aplicados em cada componente referido. Foi conduzida uma caracterização no estado bruto de fundição de um aço inoxidável vazado usado para produzir um protótipo do colector de gases. Esta caracterização consistiu numa análise microestrutural e medição de macro e microdurezas. Além da caracterização inicial, foram aplicados um conjunto de tratamentos térmicos, de forma a estudar a possibilidade de eliminar os carbonetos presentes inicialmente nas fronteiras de grão. As principais conclusões deste trabalho são que o aço vazado apresenta potencial para ser uma escolha válida em diversas aplicações, devido a um leque alargado de propriedades apresentadas tipicamente por este material. Relativamente a aplicações estruturais, o aço vazado é vantajoso comparativamente ao ferro fundido, quando são requeridos, por exemplo, soldabilidade e elevada resistência, combinada com elevada tenacidade à fractura. Para componentes sujeitos a elevadas temperaturas de serviço, o aço inoxidável vazado é vantajoso quando usado a temperaturas superiores a 750°C, apesar do seu elevado custo. O tratamento térmico composto por um recozimento de solubilização seguido de envelhecimento, elimina quase na totalidade os carbonetos presentes nas fronteiras de grão e verifica-se um aumento de dureza através de uma precipitação de carbonetos finamente dispersos na matriz, que poderão também aumentar a resistência à fluência.

On the unknown ecological niche of Paracoccidioides brasiliensis: our hypothesis of 1989: present status and perspectives

In 1989, CONTI DÍAZ & RILLA published a hypothesis concerning the as yet unknown ecological niche of Paracoccidioides brasiliensis. The hypothesis proposed a highly efficient paracoccidioidal ecological strategy based on an important natural reservoir of the parasite, probably in heterothermic animals from fresh water environments. Further, the hypothesis proposed, a transient and variable residence in the soil with a wide aleuriospore dispersion throughout the environment together with an elevated capability of infecting humans, and domestic and wild animals. This paper analyzes scientific publications from the IX International Meeting on Paracoccidioidomycosis held in Águas de Lindoia, São Paulo, Brazil from 2-5 October 2005, providing a comparative study among this articles and with other recently published papers and the hypothesis' postulates. Since various findings and observations appear to agree with the postulates, the pursuit of novel, specific research projects in the supposed reservoirs is recommended partially or fully to confirm the hypothesis using classical laboratorial methods and modern molecular biology techniques.

Fate Hazardous elements in soils surrounding a coal-fired power plant complex

Proceedings of the 13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources - 9–12 June 2015 • Copenhagen, Denmark

Structural adhesives modified with thermally expandable particles

In this study, the behaviour of two structural adhesives modified with thermally expandable particles (TEPs) was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the adhesives and TEPs-modified adhesives. In order to determine the expansion temperature of the particles while encapsulated in these particular adhesive systems, the variation of the volume of adhesive samples modified with different TEPs concentration as a function of temperature was measured. Further, the possibility of any chemical interactions between TEPs and adhesives matrix in the TEPs-modified specimens was verified by a Fourier transform infrared spectroscopy analysis. Finally, the fracture surfaces of the unmodified and TEPs-modified specimens, as well as the dispersion and the morphology of the particles, were examined by a scanning electron microscopy analysis. It was found that the stiffness of the TEPs-modified adhesives is not affected by incorporation of TEPs in the adhesives matrix, while the tensile yield strength decreased by increasing the wt% TEPs content. In applications of such particular materials (TEPs-modified adhesives), the temperature should be controlled to stay between 90°C and 120°C in order to obtain the highest expansion ratio. At a lower temperature, not all the particles will expand, and above, the TEPs will deteriorate and as a result the TEPs-modified adhesives will deteriorate.

Animal helminths in human archaeological remains: a review of zoonoses in the past

The authors present a review of records of intestinal parasitic helminths from animals in human archaeological remains, reported since the emergence of paleopathological studies. The objective was to relate paleoparasitological findings to geographic, biotic, and abiotic factors from the environment in which the prehistoric populations lived, and understand some aspects related to the process of human dispersion and biological and cultural evolution. Modification of eating habits and the incorporation of new cultural practices are analyzed from the perspective of zoonoses from prehistory to the present day, especially in Brazilian indigenous populations. Three tables identifying the helminths, their natural hosts, dates, and sites of archaeological findings complete this review. In conclusion, various zoonoses known today have occurred since antiquity, and these data, combined with studies on the emergence and reemergence of diseases, could make possible to compose scenarios for the future.

Comparing the performance of geostatistical models with additional information from covariates for sewage plume characterization

In this work, kriging with covariates is used to model and map the spatial distribution of salinity measurements gathered by an autonomous underwater vehicle in a sea outfall monitoring campaign aiming to distinguish the effluent plume from the receiving waters and characterize its spatial variability in the vicinity of the discharge. Four different geostatistical linear models for salinity were assumed, where the distance to diffuser, the west-east positioning, and the south-north positioning were used as covariates. Sample variograms were fitted by the Mat`ern models using weighted least squares and maximum likelihood estimation methods as a way to detect eventual discrepancies. Typically, the maximum likelihood method estimated very low ranges which have limited the kriging process. So, at least for these data sets, weighted least squares showed to be the most appropriate estimation method for variogram fitting. The kriged maps show clearly the spatial variation of salinity, and it is possible to identify the effluent plume in the area studied. The results obtained show some guidelines for sewage monitoring if a geostatistical analysis of the data is in mind. It is important to treat properly the existence of anomalous values and to adopt a sampling strategy that includes transects parallel and perpendicular to the effluent dispersion.

Lutzomyia longipalpis behavior and control at an urban visceral leishmaniasis focus in Argentina

During the earlier stages of visceral leishmaniasis transmission in Posadas City, Misiones, both the night activity and attraction to humans of Lutzomyia longipalpis were assessed, in order to provide preliminary recommendations. The impact of peridomestic deltamethrin spraying performed by local officials was also evaluated. Although Lu. longipalpis were found in traps located over a dog the entire night, 90% of the females were captured from 20.30h to 1.30h, and only landed on a human when he was at a distance of 1.5 m from the dog. Peridomestic spraying of deltamethrin (25 mg/m²) reduced the sand fly capture up to seven days post-intervention without dispersion in the border of the sprayed areas. These results support the recommendations about time-space focus of the protection measures: first half of the night, in the backyard, with pets and domestic animals kept at least 5 m from humans. The deltamethrin as it was used did not seem very effective in this scenario; neither did the eventual use of bed nets, at least in adults, due to the place/hour of sand fly higher activity. This study strengthens the need for a multidisciplinary approach to develop prevention strategies based both on biological and anthropological studies.

Cilia motility studies in zebrafish embryos

A thesis submitted in fulfilment of the requirements for the degree of Masters in Molecular Genetics and Biomedicine

GEOGRAPHICAL EXPANSION OF CANINE VISCERAL LEISHMANIASIS IN RIO DE JANEIRO STATE, BRAZIL

SUMMARY Visceral Leishmaniasis (VL) is a vector-borne disease that affects humans, and domestic and wild animals. It is caused by the protozoan Leishmania (Leishmania) infantum (syn = Leishmania chagasi). The domestic dog (Canis familiaris) is considered the main reservoir of the etiologic agent of VL in domestic and peridomestic environments. In the past three years, although control actions involving domestic dogs are routinely performed in endemic areas of the Rio de Janeiro State, new cases of canine visceral leishmaniasis (CVL) have been reported in several municipalities. The objective of this short communication was to describe the geographical expansion of CVL in the Rio de Janeiro State, Brazil, through its reports in the scientific literature and studies performed by our group. From 2010 to 2013, autochthonous and allochthonous cases of CVL were reported in the municipalities of Mangaratiba, Marica, Niteroi, Barra Mansa, Cachoeiras de Macacu, Volta Redonda, Resende and Rio de Janeiro. These reports demonstrate that CVL is in intense geographical expansion around the state; therefore, a joint effort by public agencies, veterinarians and researchers is needed in order to minimize and/or even prevent the dispersion of this disease.

AMINOGLYCOSIDE RESISTANCE GENES IN Pseudomonas aeruginosa ISOLATES FROM CUMANA, VENEZUELA

The enzymatic modification of aminoglycosides by aminoglycoside-acetyltransferases (AAC), aminoglycoside-adenyltransferases (AAD), and aminoglycoside-phosphotransferases (APH), is the most common resistance mechanism in P. aeruginosa and these enzymes can be coded on mobile genetic elements that contribute to their dispersion. One hundred and thirty seven P. aeruginosa isolates from the University Hospital, Cumana, Venezuela (HUAPA) were evaluated. Antimicrobial susceptibility was determined by the disk diffusion method and theaac, aadB and aph genes were detected by PCR. Most of the P. aeruginosa isolates (33/137) were identified from the Intensive Care Unit (ICU), mainly from discharges (96/137). The frequency of resistant P. aeruginosaisolates was found to be higher for the aminoglycosides tobramycin and amikacin (30.7 and 29.9%, respectively). Phenotype VI, resistant to these antibiotics, was the most frequent (14/49), followed by phenotype I, resistant to all the aminoglycosides tested (12/49). The aac(6´)-Ib,aphA1 and aadB genes were the most frequently detected, and the simultaneous presence of several resistance genes in the same isolate was demonstrated. Aminoglycoside resistance in isolates ofP. aeruginosa at the HUAPA is partly due to the presence of the aac(6´)-Ib, aphA1 andaadB genes, but the high rates of antimicrobial resistance suggest the existence of several mechanisms acting together. This is the first report of aminoglycoside resistance genes in Venezuela and one of the few in Latin America.

Hospital costs and random demand

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Potentiality of Achatina fulica Bowdich, 1822 (Mollusca: Gastropoda) as intermediate host of the Angiostrongylus costaricensis Morera & Céspedes 1971

Samples of Achatina fulica were experimentally infected with Angiostrongylus costaricensis larvae, etiological agent of abdominal angiostrongyliasis, showing that A. fulica is susceptible to the parasite. Achatina fulica may be a risk to urbanization of abdominal angiostrongyliasis presumably due to its high proliferation, continuous dispersion and remarkable adaptation in several Brazilian towns.

Development of a satellite based PM10 concentration product for urban areas

Dissertação para obtenção do Grau de Doutor em Engenharia do Ambiente

Analysis, testing and development of safe cleaning methods of rusted stone material

Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.