Trabajos preparados y materiales de ensenanza del Curso Regional Intensivo de Demografia 1980

Incluye Bibliografía

Analisis en poblacion y desarrollo: distribucion espacial de la poblacion: factores y politicas; informe del Taller

El informe sobre el Taller Regional de Capacitacion sobre Distribucion Espacial de la Poblacion: Factores y Politicas, llevado a cabo en San Jose, Costa Rica en 1988, contiene los objetivos, caracteristicas, relacion de las actividades realizadas y evaluacion del Taller. Se incluye diverso material relacionado con el Taller, como folletos, correspondencia, programa, lista de participantes, numerosos ejercicios de laboratorio, etc.

Reproduccion de la poblacion y desarrollo; ensayo de interpretacion para America Latina

Incluye Bibliografía

Informe de la investigacion realizada por los alumnos del curso de tecnicas de investigacion biosocial en cinco unidades sanitarias de San Jose, Costa Rica

El documento presenta los objetivos, metodologia y resultados de la investigacion realizada por los alumnos del Curso de Tecnicas de Investigacion Bio-Social de CELADE en cinco unidades sanitarias de San Jose, Costa Rica, en una muestra de usuarias activas del Programa de Planificacion Familiar.

Efeito da escovação na formação in situ de biofilme dentário inicial e na rugosidade superficial em cerâmica de y-tzp após vitrificação e polimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Un análisis comparativo de la productividad en las industrias manufactureras del Brasil y México

El objetivo es analizar la evolución de la productividad de las industrias manufactureras en el Brasil y México entre 1995 y 2009, donde se registró un marcado crecimiento de la competencia internacional. Se consideran 14 sectores industriales utilizándose dos métodos basados respectivamente en: i) el modelo de Leontief (1951) para medir el consumo de bienes intermedios empleados en la producción; y ii) el análisis de la productividad total de los factores (ptf). Los estudios realizados revelan que la industria ha seguido trayectorias distintas en los dos países. En México, el aumento de los requerimientos de bienes y servicios importados se compensó con la disminución de los requerimientos de bienes y servicios nacionales y con el incremento de la ptf en la producción. En el caso brasileño, el mayor aislamiento de los mercados de bienes manufacturados para el comercio exterior parece haber contribuido al débil desempeño de la productivi

Impactos y vulnerabilidad al cambio climático de los principales ríos de Mendoza y San Juan a partir de la evolución de los glaciares cordilleranos: la economía del cambio climático en la Argentina

Mendoza y San Juan son las provincias de la región de Cuyo con recursos hídricos de origen netamente cordilleranos. El hidrograma de los ríos cuyanos se está modificado debido principalmente al aumento de la temperatura. De incrementarse la tendencia observada en la temperatura esta alteración podría tener un alto impacto en el manejo y regulación de los caudales. En este documento se muestran los resultados de dos estudios para esta región. El primero evalúa el comportamiento de las tendencias en la variabilidad de las precipitaciones, la temperatura, los caudales y el hidrograma frente a escenarios de cambio climático. Las cuencas más afectadas serían aquellas ubicadas hacia el sur de la región porque son las más bajas, en las cuales la disminución de las superficies alcanzaría porcentajes entre el 75% y 80% para fines de este siglo, con respecto a las superficies actuales. En estas condiciones es previsible una disminución de la superficie de los glaciares, con un fuerte retroceso de los mismos y la pérdida consiguiente de la reserva de agua en ellos almacenada. En la segunda parte del documento se cuantifica el impacto socioeconómico del cambio climático en las cuencas de Mendoza y San Juan. La reducción de los derrames de los ríos (oferta), el aumento de la demanda y los procesos de degradación del agua, determinaría el aumento del valor social marginal del agua. Mediante modelos de simulación se trazó el valor de corte entre oferta y demanda en el tiempo. La posición y trayectoria temporal del valor social marginal del agua, revelará la magnitud de la escasez, y la velocidad con que esta se incrementa. Estos indican el costo social de la escasez y robustez de la sustentabilidad en cada caso. Se realizan distintas corridas bajo escenarios alternativos para cada cuenca, lo que permite identificar políticas óptimas.

Alcohol and Quality of Life Among Social Groups for the Elderly in Sao Jose dos Campos, Brazil

This study aims to investigate alcohol consumption within social groups for the elderly in So Jos, dos Campos-Brazil, and to check for a correlation between alcohol consumption and quality of life. A sample of 500 individuals participating on social groups for the elderly were interviewed by using the Alcohol Use Disorders Identification Test (AUDIT) to verify alcohol consumption; the Medical Outcomes Study 36 Item Short Form (SF-36), for evaluating quality of life; and the Oral Health Impact Profile short form (OHIP-14), for evaluating oral health-related quality of life. The average alcohol consumption was very low (1.48), being higher in men (2.23) than women (1.09). The SF-36 average score for the domain of physical function was 70.5; for role-physical function 64.9; for bodily pain,68.3; for general health 73.8; for vitality,72.4; for social function 82.8; for role-emotional function 72.3 and for mental health 75.0. The OHIP-14 average score was 3.87. AUDIT did not correlate with SF-36 domains, or with OHIP-14. However, there was a negative correlation between OHIP 14 and all SF-36 domains. This elderly sample has a very low consumption of alcohol, and no correlation was found between alcohol consumption and oral and medical quality of life.

Homomorphic Sex Chromosomes and the Intriguing Y Chromosome of Ctenomys Rodent Species (Rodentia, Ctenomyidae)

Unlike the X chromosome, the mammalian Y chromosome undergoes evolutionary decay resulting in small size. This sex chromosomal heteromorphism, observed in most species of the fossorial rodent Ctenomys, contrasts with the medium-sized, homomorphic acrocentric sex chromosomes of closely related C. maulinus and C. sp. To characterize the sequence composition of these chromosomes, fluorescent banding, self-genomic in situ hybridization, and fluorescent in situ hybridization with an X painting probe were performed on mitotic and meiotic plates. High molecular homology between the sex chromosomes was detected on mitotic material as well as on meiotic plates immunodetected with anti-SYCP3 and anti-gamma H2AX. The Y chromosome is euchromatic, poor in repetitive sequences and differs from the X by the loss of a block of pericentromeric chromatin. Inferred from the G-banding pattern, an inversion and the concomitant prevention of recombination in a large asynaptic region seems to be crucial for meiotic X chromosome inactivation. These peculiar findings together with the homomorphism of Ctenomys sex chromosomes are discussed in the light of the regular purge that counteracts Muller's ratchet and the probable mechanisms accounting for their origin and molecular homology. (C) 2014 S. Karger AG, Basel

Effect of surface and heat treatments on the biaxial flexural strength and phase transformation of a Y-TZP ceramic

To evaluate the effect of grinding and airborne-particle abrasion on the biaxial flexural strength (BFS) and phase transformation of a Y-TZP ceramic, and examine whether sintering the veneering porcelain renders the previous heat treatment recommended by the manufacturer unnecessary. Materials and Methods: Lava zirconia specimens (N = 108) were obtained with the following dimensions: 14.0 mm diameter × 1.3 mm thickness (n = 36) and 14.0 mm × 1.6 mm (n = 72). The thicker specimens were ground with diamond burs under irrigation and received (heat-treated groups) or not (non-heat-treated groups) a heat treatment (1000°C for 30 min) prior to the four firing cycles applied to simulate the sintering of the veneering porcelain. All specimens were air abraded as follows (n = 12): 1) 30-μm silica-modified Al2O3 particles (Rocatec Soft); 2) 110-μm silica-modified Al2O3 particles (Rocatec Plus); and 3) 120-μm Al2O3 particles, followed by Rocatec Plus. Three specimens of each group were analyzed by x-ray diffraction (XRD) to assess the monoclinic phase content (%). The BFS test was performed in a mechanical testing machine (Instron 8874). Data (MPa) were analyzed by two-way ANOVA (grinding × airborne-particle abrasion and heat treatment × airborne-particle abrasion) and Tukey's post-hoc test (α = 0.05). The strength reliability was analyzed using the Weibull distribution. Results: Grinding significantly decreased the BFS of the non-heat-treated groups (p < 0.01). Within the ground groups, the previous heat treatment did not influence the BFS (p > 0.05). Air abrasion only influenced the BFS of the ground/heat-treated groups (p < 0.01). For the non-heat-treated groups, the grinding did not decrease the Weibull modulus (m), but it did decrease the characteristic strength (σ0). For Rocatec Soft and 120-μm Al2O3 particles + Rocatec Plus, the heat-treated groups presented lower m and higher σ0 than the ground/non-heat-treated groups. The independent variables did not seem to influence phase transformation. Air-abraded surfaces presented higher monoclinic zirconia content than the as-sintered and ground surfaces, which exhibited similar content. Conclusion: Even under irrigation, grinding compromised the Y-TZP ceramic strength. The sintering of the veneering porcelain rendered the previous heat treatment recommended by the manufacturer unnecessary. Airborneparticle abrasion influenced the strength of heat-treated zirconia.

Effect of surface and heat treatments on the biaxial flexural strength and phase transformation of a y-tzp ceramic

To evaluate the effect of grinding and airborne-particle abrasion on the biaxial flexural strength (BFS) and phase transformation of a Y-TZP ceramic, and examine whether sintering the veneering porcelain renders the previous heat treatment recommended by the manufacturer unnecessary. Materials and Methods: Lava zirconia specimens (N = 108) were obtained with the following dimensions: 14.0 mm diameter × 1.3 mm thickness (n = 36) and 14.0 mm × 1.6 mm (n = 72). The thicker specimens were ground with diamond burs under irrigation and received (heat-treated groups) or not (non-heat-treated groups) a heat treatment (1000°C for 30 min) prior to the four firing cycles applied to simulate the sintering of the veneering porcelain. All specimens were air abraded as follows (n = 12): 1) 30-μm silica-modified Al2O3 particles (Rocatec Soft); 2) 110-μm silica-modified Al2O3 particles (Rocatec Plus); and 3) 120-μm Al2O3 particles, followed by Rocatec Plus. Three specimens of each group were analyzed by x-ray diffraction (XRD) to assess the monoclinic phase content (%). The BFS test was performed in a mechanical testing machine (Instron 8874). Data (MPa) were analyzed by two-way ANOVA (grinding × airborne-particle abrasion and heat treatment × airborne-particle abrasion) and Tukey's post-hoc test (α = 0.05). The strength reliability was analyzed using the Weibull distribution. Results: Grinding significantly decreased the BFS of the non-heat-treated groups (p < 0.01). Within the ground groups, the previous heat treatment did not influence the BFS (p > 0.05). Air abrasion only influenced the BFS of the ground/heat-treated groups (p < 0.01). For the non-heat-treated groups, the grinding did not decrease the Weibull modulus (m), but it did decrease the characteristic strength (σ0). For Rocatec Soft and 120-μm Al2O3 particles + Rocatec Plus, the heat-treated groups presented lower m and higher σ0 than the ground/non-heat-treated groups. The independent variables did not seem to influence phase transformation. Air-abraded surfaces presented higher monoclinic zirconia content than the as-sintered and ground surfaces, which exhibited similar content. Conclusion: Even under irrigation, grinding compromised the Y-TZP ceramic strength. The sintering of the veneering porcelain rendered the previous heat treatment recommended by the manufacturer unnecessary. Airborneparticle abrasion influenced the strength of heat-treated zirconia.

Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramic

Statement of problem Because zirconia is a glass-free material, alternative surface treatments such as airborne-particle abrasion or silica coating should be used for long-term bonding. However, these surface treatments in combination with different bonding agents and luting cements have not yet been studied. Purpose The purpose of the study was to evaluate the effect of surface treatments on the shear bond strength (SBS) of luting cements to Y-TZP ceramic. Material and methods Zirconia disks (N=240) were airborne-particle abraded with the following particles (n=48): 50 μm Al2O3; 120 μm Al2O3; 30 μm silica-coated Al2O3 (Rocatec Soft); 120 μm Al2O3+110 μm silica-coated Al2O3 (Rocatec Plus); and Rocatec Plus. After silanization of the zirconia surface, composite resin disks were bonded with (n=12) RelyX Luting 2; RelyX ARC; RelyX U100; and Panavia F. The bonded specimens were thermocycled (10 000 cycles) and tested for SBS. Failure mode was determined with a stereomicroscope (×20). The morphology and elemental composition of airborne-particle abraded surfaces were evaluated with scanning electron microscopy (×500) and energy-dispersive x-ray spectroscopy (×50). Results Surface treatments, cements, and their interaction were significant (P<.001). For RelyX ARC, Rocatec Soft and Rocatec Plus provided the highest SBS. In general, surface treatments did not influence the SBS of RelyX U100 and Panavia F. Regardless of the cement, no significant difference was found between 50 μm and 120 μm Al2O3 particles, between Rocatec Soft and Rocatec Plus, or between Rocatec Plus and 120 μm Al2O3 particles+Rocatec Plus. All groups showed adhesive failures. Different particle sizes provided differences in morphological patterns. The elemental composition comprised Al and Al/Si for alumina and silica-abraded zirconia. Conclusions Particle size did not influence the SBS of the groups abraded exclusively with alumina or silica-coated particles. RelyX ARC was more surface-treatment dependent than RelyX U100 or Panavia F.

Ambiente térmico y el bienestar de los cerdos en el período de descanso previo al sacrificio

The research aimed to evaluate the relationship between the thermal environment of the rest pens in a pig slaughterhouse and the surface temperature (ST) of the animals as well as the effect of intermittent water spraying on thermal comfort. There were two visits to slaughter industrial being in each selected three pens of rest, one for control treatment (no spray throughout the period) and two for the treatment of intermittent spraying water (30 minutes intervals with constant spray followed by 30 minutes then turned off). Assessments began at the time of discharging animals in which are taken the thermographic images from lots using an infrared thermographic camera. After housing in the pens, were registered the thermographic images and the respiratory frequency (RF) every five minutes for four hours. Were evaluated the temperature, relative humidity and temperature-humidity index (THI). Considering the values of THI was observed that the animals remained in a condition of comfort only at the time of his arrival at the slaughterhouse. The ST and RF of the animals kept in the pens without sprinkler system (control) showed a linear increase in function of time of day, with increasing temperature. The treatment with intermittent sprinkling of water was observed oscillatory behavior of the ST and RF, however it was always lower than the control treatment, even in times when the water sprinklers were turned off. The time required of spray to reduction and stabilization of the ST of the animals was limited to the combination of temperature and relative humidity, being estimated at 25 minutes at times of higher THI. The maximum environmental temperature during evaluation was 28.4 oC.

PREVALENCE AND DETERMINANTS OF EXCLUSIVE BREASTFEEDING IN THE CITY OF SERRANA, SAO PAULO, BRAZIL

The objective of this cross-sectional and quantitative study was to identify the prevalence and determinants of exclusive breastfeeding among infants less than six months of age in the city of Serrana, Sao Paulo, Brazil in 2009. A validated semi-structured questionnaire was administered to the guardians of the children less than six months of age who attended the second phase of a Brazilian vaccination campaign against polio. Univariate and multivariate analysis presented in odds ratios and confidence intervals was accomplished. Of the total of 275 infant participants, only 29.8% were exclusively breastfed. Univariate analysis revealed that mothers who work outside the home without maternity leave, mothers who did not work outside the home, adolescent mothers, and the use of pacifiers have a greater chance of interrupting exclusive breastfeeding. In the multivariate analysis, mothers who work outside the home without maternity leave are three times more likely to wean their children early. Results provide suggestions for the redirection and planning of interventions targeting breastfeeding.

Internal fit of two all-ceramic systems and metal-ceramic crowns

Objectives: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. Material and Methods: Sixty standardized resin-tooth replicas of a maxillary first molar were produced for crown placement and divided into 3 groups (n=20 each) according to the core material used (metal, ICA or Y-TZP). The IF of the crowns was measured using the replica technique, which employs a light body polyvinyl siloxane impression material to simulate the cement layer thickness. The data were analyzed according to the surfaces obtained for the occlusal space (OS), axial space (AS) and total mean (TM) using two-way ANOVA with Tukey's multiple comparison test (p<0.05). Results: No differences among the different areas were detected in the MC group. For the Y-TZP and ICA groups, AS was statistically lower than both OS and TM. No differences in AS were observed among the groups. However, OS and TM showed significantly higher values for ICA and Y-TZP groups than MC group. Comparisons of ICA and Y-TZP revealed that OS was significantly lower for Y-TZP group, whereas no differences were observed for TM. Conclusions: The total mean achieved by all groups was within the range of clinical acceptability. However, the metal-ceramic group demonstrated significantly lower values than the all-ceramic groups, especially in OS.