Differences in muscular activity between obese and non-obese workers during manual lifting

The prevalence of obesity is increasing throughout the workforce. Manual lifting tasks are common and can produce significant muscle loading. This study compared muscular activity between obese and non-obese subjects, using surface Electromyography (EMG), during manual lifting. Six different lifting tasks (with 5, 10 and 15 kg loads in free and constrained styles) were performed by 14 participants with different obesity levels. EMG data normalization was based on the percentage of Maximum Contraction during each Task (MCT). Muscle Activation Times (AT) before each task were also evaluated. The study suggests that obesity can increase MCT and delay muscle AT. These findings reinforce the need to develop further studies focused on obesity as a risk factor for the development of musculoskeletal disorders.

Immune cell changes in swimmers : response to acute exercise and training

O treino competitivo envolve exercício intenso e prolongado, capaz de modular o número e actividade das células imunitárias. Quando demasiado exigente poderá induzir fadiga e aumentar a susceptibilidade a doenças. Esta dissertação apresenta três estudos desenvolvidos no âmbito da Imunologia do Exercício, considerando a análise da resposta celular imunitária sistémica aguda e crónica ao exercício aplicada em situações reais do treino competitivo de natação, controlando factores passíveis de influenciar esta resposta. Pretendeu-se avaliar a resposta imunitária a uma sessão de treino prolongada e intensa, durante as 24h de recuperação (Estudo 1) e a uma época de treino com sete meses (Estudo 2), e estudar a influência de um macrociclo de treino de quatro meses sobre a resposta imunitária à mesma sessão de treino e período de recuperação (Estudo 3), controlando sexo, fases do ciclo menstrual, maturidade, escalão, especialidade, performance, cargas de treino e sintomas respiratórios superiores (URS). A sessão de treino induziu a diminuição da vigilância imunitária adquirida imediatamente e, pelo menos nas 2h seguintes. Juvenis e seniores recuperaram totalmente 24h depois, mas não os juniores, reforçando a ideia da existência de uma janela aberta para a infecção após exercícios prolongados e intensos e sugerindo uma recuperação menos eficiente para os juniores. No período de treino mais intenso da época observou-se uma imunodepressão e maior prevalência de URS. No final da época, a imunidade inata diminuiu aparentando maior sensibilidade aos efeitos cumulativos da carga de treino, enquanto a imunidade adquirida parece ter recuperado após o taper. O macrociclo de treino atenuou a resposta imunitária à sessão de treino e aumentou o período de janela aberta às infecções (efeitos mais acentuados nos adolescentes). Os resultados evidenciam a importância de controlar alterações imunitárias durante a época competitiva, especialmente em períodos de treino intenso e quando se realizam sessões de treino intensas consecutivas com recuperações inferiores a 24h.

Analysis of energy management in GMIT

Energy management is the process of monitoring, controlling and conserving energy in a building or organisation. The main reasons for this are for cost purposes and benefit to the environment. Through various techniques and solutions for lighting, heating, office equipment, the building fabric etc along with a change in people’s attitudes there can be a substantial saving in the amount spent on energy. A good example o f energy waste in GMIT is the lighting situation in the library. All the lights are switched on all day on even in places where that is adequate daylighting, which is a big waste o f energy. Also the lights for book shelves are left on. Surely all these books won’t be searched for all at the one time. It would make much more sense to have local switches that the users can control when they are searching for a particular book. Heating controls for the older parts o f the college are badly needed. A room like 834 needs a TRV to prevent it from overheating as temperatures often reach the high twenties due to the heat from the radiators, computers, solar gains and heat from users o f the room. Also in the old part o f the college it is missing vital insulation, along with not being air tight due to the era when it was built. Pumped bonded bead insulation and sealant around services and gaps can greatly improve the thermal performance o f the building and help achieve a higher BER cert. GMIT should also look at the possibility o f installing a CHP plant to meet the base heating loads. It would meet the requirement o f running 4500 hours a year and would receive some financial support from the Accelerated Capital Allowance. I f people’s attitudes are changed through energy awareness campaigns and a few changes made for more energy efficient equipment, substantial savings can be made in the energy expenditure.

Pulmonary Embolism Mortality in Brazil from 1989 to 2010: Gender and Regional Disparities

Abstract Background: A significant variation in pulmonary embolism (PE) mortality trends have been documented around the world. We investigated the trends in mortality rate from PE in Brazil over a period of 21 years and its regional and gender differences. Methods: Using a nationwide database of death certificate information we searched for all cases with PE as the underlying cause of death between 1989 and 2010. Population data were obtained from the Brazilian Institute of Geography and Statistics (IBGE). We calculated age-, gender- and region-specific mortality rates for each year, using the 2000 Brazilian population for direct standardization. Results: Over 21 years the age-standardized mortality rate (ASMR) fell 31% from 3.04/100,000 to 2.09/100,000. In every year between 1989 and 2010, the ASMR was higher in women than in men, but both showed a significant declining trend, from 3.10/100,000 to 2.36/100,000 and from 2.94/100,000 to 1.80/100,000, respectively. Although all country regions showed a decline in their ASMR, the largest fall in death rates was concentrated in the highest income regions of the South and Southeast Brazil. The North and Northeast regions, the lowest income areas, showed a less marked fall in death rates and no distinct change in the PE mortality rate in women. Conclusions: Our study showed a reduction in the PE mortality rate over two decades in Brazil. However, significant variation in this trend was observed amongst the five country regions and between genders, pointing to possible disparities in health care access and quality in these groups.

Ambulatory Blood Pressure Monitoring: Five Decades of More Light and Less Shadows

Abstract Casual blood pressure measurements have been extensively questioned over the last five decades. A significant percentage of patients have different blood pressure readings when examined in the office or outside it. For this reason, a change in the paradigm of the best manner to assess blood pressure has been observed. The method that has been most widely used is the Ambulatory Blood Pressure Monitoring - ABPM. The method allows recording blood pressure measures in 24 hours and evaluating various parameters such as mean BP, pressure loads, areas under the curve, variations between daytime and nighttime, pulse pressure variability etc. Blood pressure measurements obtained by ABPM are better correlated, for example, with the risks of hypertension. The main indications for ABPM are: suspected white coat hypertension and masked hypertension, evaluation of the efficacy of the antihypertensive therapy in 24 hours, and evaluation of symptoms. There is increasing evidence that the use of ABPM has contributed to the assessment of blood pressure behaviors, establishment of diagnoses, prognosis and the efficacy of antihypertensive therapy. There is no doubt that the study of 24-hour blood pressure behavior and its variations by ABPM has brought more light and less darkness to the field, which justifies the title of this review.

Estudos sôbre a distribuição do radiozinco no tomateiro (Lycopersicum esculentum)

The present paper relates a few experiments carried out to study the distribution of radiozinc in tomato seedlings as well its translocation in adult plants. 1 Tomato seedlings grown in nutrient solution were given during two weeks ca. 0.2 microcuries of Zn65C112; the seedlings were then harvested, and after careful washing of the roots with distiled water and diluted HC1, a radioautograph was taken (Fig. 1); this shows that the whole seedling, including the first cotyledon leaves are active; the Zn65 is preferentially concentrated, however, in the root system; this fact suggests that finding by ROSSITER (1953) that the roots of plants growing under natural conditions had a very high concentration of zinc is not due to soil contamination being ascribable to the physiology of such micronutrient. 2. The translocation of radiozinc was demonstrated by three different ways. In the first case, Zn65Cl2 was supplied to the nutrient solution during four weeks; three weeks after the addition of the radiozinc was discontinued, the newer leaves were detached and a radioautograph was taken (Fig. 2); the activity therein found shows that translocation occurred from the old leaves to the young ones. In the next experiment, identical procedure was followed but, instead of a radioautograph, different parts of the plant were ashed and counted; it was verified that 66.6 per cent of the activity supplied was absorbed; due to a great fixation within the roots only 5,6 per cent was translocated to the newer organs. In the third trial, Zn65C12 was directly applied to both upper and lower surfaces of medium aged leaves; counting the separated organs revealed that: 24.2 per cent of the activity applied hab been absorbed; however, 13.7 per cent translocated to the rest of the plant including to the roots. The author wishes to express his gratitude to Dr. P. R. Stout, Chairman, Dept. of Plant Nutrition, University of California, Berkeley and to Mr. A. B. Carlton for their help during part of this work. O autor agradece ao Laboratório de Isótopos da Universidade de São Paulo, na pessoa do Dr. T. Eston, o fornecimento do Zn65 usado neste trabalho.

Taxonomia e distribuição de Actinocythereis brasiliensis sp. nov. (Podocopida, Trachyleberididae) na plataforma continental brasileira

A new species is described, Actinocythereis brasiliensis, from the southern Brazilian continental shelf. It is based on the analysis of 766 samples collected by oceanographical projects. The geographical distribution of this species has revealed its preference by the cold waters and terrigenous sediments and, has a bathymetric distribution between 22 and 164 m but, being concentrated in the shallower waters (< 60 m).

Ecologia de Xylocopa (Neoxylocopa) cearensis (Hymenoptera, Anthophoridae) nas dunas litorâneas de Abaeté, Salvador, Bahia

The study was carried out in a 8.2 ha area in an environmental protection area of tropical sea coastal sand dune with "restinga" vegetation in Salvador, Bahia, northeastern Brazil. A total of 1760 bees of Xylocopa (Neoxylocopa) cearensis Ducke, 1910 were netted during the whole year on flowers of 43 plant species belonging to 26 botanic families. The majority of the individuals (79%) concentrated their foraging activity in five plant species. Individuals foraged all day long being the greatest activity between 8 h and 14 h. Similar proportions of young and old bees were sampled over the year. The density of substrates used for nesting was 4.56/ha. In total, 94% of the nests were found in branches of Agaristha revoluta (Spr.) DC. (Ericaceae). The great occurrence (68.7%) of old perforations indicates that the nests were used twice or more times by bees.

Ophionereis reticulata (Echinodermata, Ophiuroidea)

This study compared the arm regeneration frequencies in two different populations of Ophionereis reticulata (Say, 1825) in São Sebastião, Southeast Brazil and observed arm regeneration between age classes (juvenile and adults) and sexes (male and female). From the 1,170 individuals sampled, 1,089 (92.2%) showed signs of arm regeneration. The relative frequencies of regenerating arms in the two areas were not different (Baleeiro Isthmus: 91.3% and Grande Beach: 99.5%). Both areas also presented similar values for the number of arms regenerating/individual and in the frequency of regenerating individuals. The major part of the regenerating scars was concentrated in the distal portion of the arm. Sub-lethal predation is most likely the cause to the high rates of arm regeneration in O. reticulata. There was no significant differences in the regeneration rates between females (3.57 ± 1.36 arms regenerating/individual) and males (3.47 ± 1.42).

Daily activity and microhabitat use of sympatric lizards from Serra do Cipó, southeastern Brazil

We studied the influence of seasonality on the daily activity pattern and microhabitat use of three sympatric lizard species, Cnemidophorus ocellifer Spix, 1825 (Teiidae), Tropidurus montanus Rodrigues, 1987 and Eurolophosaurus nanuzae (Rodrigues, 1981) (Tropiduridae), in an area of campos rupestres (rocky fields) habitat in state of Minas Gerais, Brazil. Cnemidophorus ocellifer exhibited low density and activity concentrated within the hottest hours of the day, and was observed mainly on shaded rocks. Tropidurus montanus and E. nanuzae had similar activity patterns that did not vary between seasons. Activity of T. montanus was related to environmental temperatures. However, we did not find such relationships for E. nanuzae during the dry season. Both T. montanus and E. nanuzae were sighted mainly on exposed rocks. Extension of activity varied between seasons, shorter for C. ocellifer and longer for T. montanus and E. nanuzae during the rainy season.

A note on Spatial Autocorrelation at a Local Level

In this paper we analyze the existence of spatial autocorrelation at a local level in Catalonia using variables such as urbanisation economies, population density, human capital and firm entries. From a static approach, our results show that spatial autocorrelation is weak and diminishes as the distance between municipalities increases. From a dynamic approach, however, spatial autocorrelation increased over the period we analysed. These results are important from a policy point of view, since it is essential to know how economic activities are spatially concentrated or disseminated. Key words: spatial autocorrelation, municipalities. JEL classification: R110, R120

Fabricació de Lents Zonals de Fresnel per aplicació als raigs X tous

Estudi elaborat a partir d’una estada al Paul Scherrer Institut del Maig a l’Octubre del 2006 amb l’ajuda i supervisió dels Dr. Konstantins Jefimovs i Dr. Christian David. Focalitzar raigs X tous és una necessitat essencial per al microanàlisis, la microscopia, i fer imatges en moltes Instal·lacions de Radiació Sincrotró. Les Lents Zonals de Fresnel (FZP, de la denominació anglesa “Fresnel Zone Plates”) han demostrat donar uns punts focals amb una resolució espacial destacada i una baixa il·luminació de fons. Tanmateix, la fabricació de FZP és complexa i no totalment reproduïble. A més a més, el temps de vida de les FZP és força curt, ja que estant situades sobre membranes de nitrur de silici molt fines i altament absorbents. Per tant, hem fet esforços per implementar FZP de silici, que s’espera que siguin més resistents. L’element està fet d’una oblia de cristall de silici poc absorbent, i no presenta cap interfase entre materials. Així doncs, aquestes lents són especialment adequades per a aguantar les extremes càrregues de radiació de les fonts de raigs X més brillants. Particularment, això és molt important per a les aplicacions a les pròximes generacions de fonts de raigs X, com els Làsers d’Electrons Lliures (FEL, de la denominació anglesa “Free Electron Laser”). El silici també garanteix que no hi hagi cap banda d’absorció en el rang d’energies de la finestra de l’aigua (200-520 eV), fent aquestes lents ideals per a fer imatges de mostres biològiques. En aquest informe, hi ha una descripció detallada de tots els passos involucrats en la fabricació de les Lents Zonals de Fresnel de silici. En resum, les estructures de FZP es modelen sobre una resina utilitzant litografia per feix d’electrons i llavors el patró es transmet al silici mitjançant un gravat d’ions reactius (RIE, de la denominació anglesa ‘Reactive Ion Etching’) utilitzant una fina (20 nm) màscara de Crintermitja. Les membranes de silici es poden aprimar després de la fabricació de les estructures per a garantir una transmissió suficient fins i tot a baixes energies. Aquest informe també inclou l’anàlisi i la discussió d’alguns experiments preliminars per avaluar el rendiment de les Si FZPs fets a la línia de llum PolLux del Swiss Ligth Source amb l’ajuda dels Dr. Jörg Raabe i Dr. George Tzvetkov.

Análisis de los residuos sólidos generados en áreas administrativas, académicas, bibliotecas y cómputos, de ciudad universitària en la UMSNH, Michoacán, México

El proyecto se enmarca dentro de Plan Ambiental Institucional (PAI) de la Universidad Michoacana de San Nicolás de Hidalgo (UMSNH), México, en lo referente a la gestión de residuos y tiene por finalidad analizar la tipología y composición de los residuos que se generan en algunas de las áreas de Ciudad Universitaria (CU). Para esto se realizó una metodología de recogida no selectiva de residuos puerta a puerta que se estructuró en dos fases, la primera, con el objetivo de obtener toda la información sobre el número y tipo de espacios de los edificios para luego elaborar y llevar a cabo el muestreo de los residuos, y la segunda, que se centró en la captura informática y gestión de los pesos de los mismos. De los datos obtenidos se concluyó que los residuos de mayor peso muestreado fueron el papel, la materia orgánica, el cartón y el vidrio transparente, los residuos de mayor generación per cápita fueron el papel, cartucho de impresora, CD y disquete. Finalmente, se concluye que la UMSNH no da tratamiento a los residuos que al ser depositados al aire libre contaminan su medio ambiente. Reciclándolos podrían obtenerse no sólo beneficios ambientales sino también económicos, que disminuirían el costo del reciclado devolviendo los residuos al ciclo productivo.

Inbreeding avoidance through kin recognition: choosy females boost male dispersal.

Inbreeding avoidance is predicted to induce sex biases in dispersal. But which sex should disperse? In polygynous species, females pay higher costs to inbreeding and thus might be expected to disperse more, but empirical evidence consistently reveals male biases. Here, we show that theoretical expectations change drastically if females are allowed to avoid inbreeding via kin recognition. At high inbreeding loads, females should prefer immigrants over residents, thereby boosting male dispersal. At lower inbreeding loads, by contrast, inclusive fitness benefits should induce females to prefer relatives, thereby promoting male philopatry. This result points to disruptive effects of sexual selection. The inbreeding load that females are ready to accept is surprisingly high. In absence of search costs, females should prefer related partners as long as delta<r/(1+r) where r is relatedness and delta is the fecundity loss relative to an outbred mating. This amounts to fitness losses up to one-fifth for a half-sib mating and one-third for a full-sib mating, which lie in the upper range of inbreeding depression values currently reported in natural populations. The observation of active inbreeding avoidance in a polygynous species thus suggests that inbreeding depression exceeds this threshold in the species under scrutiny or that inbred matings at least partly forfeit other mating opportunities for males. Our model also shows that female choosiness should decline rapidly with search costs, stemming from, for example, reproductive delays. Species under strong time constraints on reproduction should thus be tolerant of inbreeding.

Comportamiento tribomecánico de sistemas de sustrato: recubrimiento duros

En aplicaciones como la conformación en frío, donde los metales duros recubiertos con películas de naturaleza cerámica son ampliamente empleados, la existencia de un contacto mecánico repetitivo induce tensiones Hertzianas y origina el fallo por fatiga. En este trabajo, se investigan diversos recubrimientos cerámicos depositados por deposición física desde fase vapor sobre calidades diferentes de metal duro y un acero rápido pulvimetalúrgico para evaluar sus respectivas respuesta al contacto y comportamiento a fatiga. El trabajo experimental incluye la caracterización de los sistemas mediante ensayos de rayado y nanoindentación y la evaluación de las curvas tensión-deformación de indentación esférica de los sustratos, tanto desnudos como recubiertos, poniendo especial atención en determinar las tensiones de contacto críticas asociadas a la deformación plástica y a la aparición de grietas circulares en la superficie recubierta. A este estudio, le siguen numerosos ensayos a fatiga a cargas inferiores a aquéllas identificadas como críticas bajo carga monotónica y para un número de ciclos comprendido entre 1.000 y 1.000.000 de ciclos. Los resultados experimentales indican que las películas cerámicas no parecen desempeñar un papel relevante en la aparición de la cedencia plástica, siendo la deformación plástica global controlada por la deformación del sustrato. No obstante, para tensiones elevadas de indentación durante el régimen plástico, existe la aparición de grietas circulares en los recubrimientos cerámicos. Además, la aparición de las mismas es sensible a la fatiga por contacto. Este análisis mecánico se complementa con una inspección detallada del daño generado en profundidad y superficie.