Evolution of networks and sequences in eukaryotic cell cycle control.

The molecular networks regulating the G1-S transition in budding yeast and mammals are strikingly similar in network structure. However, many of the individual proteins performing similar network roles appear to have unrelated amino acid sequences, suggesting either extremely rapid sequence evolution, or true polyphyly of proteins carrying out identical network roles. A yeast/mammal comparison suggests that network topology, and its associated dynamic properties, rather than regulatory proteins themselves may be the most important elements conserved through evolution. However, recent deep phylogenetic studies show that fungal and animal lineages are relatively closely related in the opisthokont branch of eukaryotes. The presence in plants of cell cycle regulators such as Rb, E2F and cyclins A and D, that appear lost in yeast, suggests cell cycle control in the last common ancestor of the eukaryotes was implemented with this set of regulatory proteins. Forward genetics in non-opisthokonts, such as plants or their green algal relatives, will provide direct information on cell cycle control in these organisms, and may elucidate the potentially more complex cell cycle control network of the last common eukaryotic ancestor.

A theory of hypoellipticity and unique ergodicity for semilinear stochastic PDEs

We present a theory of hypoellipticity and unique ergodicity for semilinear parabolic stochastic PDEs with "polynomial" nonlinearities and additive noise, considered as abstract evolution equations in some Hilbert space. It is shown that if Hörmander's bracket condition holds at every point of this Hilbert space, then a lower bound on the Malliavin covariance operatorμt can be obtained. Informally, this bound can be read as "Fix any finite-dimensional projection on a subspace of sufficiently regular functions. Then the eigenfunctions of μt with small eigenvalues have only a very small component in the image of Π." We also show how to use a priori bounds on the solutions to the equation to obtain good control on the dependency of the bounds on the Malliavin matrix on the initial condition. These bounds are sufficient in many cases to obtain the asymptotic strong Feller property introduced in [HM06]. One of the main novel technical tools is an almost sure bound from below on the size of "Wiener polynomials," where the coefficients are possibly non-adapted stochastic processes satisfying a Lips chitz condition. By exploiting the polynomial structure of the equations, this result can be used to replace Norris' lemma, which is unavailable in the present context. We conclude by showing that the two-dimensional stochastic Navier-Stokes equations and a large class of reaction-diffusion equations fit the framework of our theory.

Phylotastic! Making tree-of-life knowledge accessible, reusable and convenient.

BACKGROUND: Scientists rarely reuse expert knowledge of phylogeny, in spite of years of effort to assemble a great "Tree of Life" (ToL). A notable exception involves the use of Phylomatic, which provides tools to generate custom phylogenies from a large, pre-computed, expert phylogeny of plant taxa. This suggests great potential for a more generalized system that, starting with a query consisting of a list of any known species, would rectify non-standard names, identify expert phylogenies containing the implicated taxa, prune away unneeded parts, and supply branch lengths and annotations, resulting in a custom phylogeny suited to the user's needs. Such a system could become a sustainable community resource if implemented as a distributed system of loosely coupled parts that interact through clearly defined interfaces. RESULTS: With the aim of building such a "phylotastic" system, the NESCent Hackathons, Interoperability, Phylogenies (HIP) working group recruited 2 dozen scientist-programmers to a weeklong programming hackathon in June 2012. During the hackathon (and a three-month follow-up period), 5 teams produced designs, implementations, documentation, presentations, and tests including: (1) a generalized scheme for integrating components; (2) proof-of-concept pruners and controllers; (3) a meta-API for taxonomic name resolution services; (4) a system for storing, finding, and retrieving phylogenies using semantic web technologies for data exchange, storage, and querying; (5) an innovative new service, DateLife.org, which synthesizes pre-computed, time-calibrated phylogenies to assign ages to nodes; and (6) demonstration projects. These outcomes are accessible via a public code repository (GitHub.com), a website (http://www.phylotastic.org), and a server image. CONCLUSIONS: Approximately 9 person-months of effort (centered on a software development hackathon) resulted in the design and implementation of proof-of-concept software for 4 core phylotastic components, 3 controllers, and 3 end-user demonstration tools. While these products have substantial limitations, they suggest considerable potential for a distributed system that makes phylogenetic knowledge readily accessible in computable form. Widespread use of phylotastic systems will create an electronic marketplace for sharing phylogenetic knowledge that will spur innovation in other areas of the ToL enterprise, such as annotation of sources and methods and third-party methods of quality assessment.

Multiphysics modeling and its application to the casting process

A modeling strategy is presented to solve the governing equations of fluid flow, temperature (with solidification), and stress in an integrated manner. These equations are discretized using finite volume methods on unstructured grids, which provide the capability to represent complex domains. Both the cell-centered and vertex-based forms of the finite volume discretization procedure are explained, and the overall integrated solution procedure using these techniques with suitable solvers is detailed. Two industrial processes, based on the casting of metals, are used to demonstrate the capabilities of the resultant modeling framework. This manufacturing process requires a high degree of coupling between the governing physical equations to accurately predict potential defects. Comparisons between model predictions and experimental observations are given.

A computational model for defect prediction in shape castings based on the interaction of free surface flow, heat transfer, and solidification phenomena

High-integrity castings require sophisticated design and manufacturing procedures to ensure they are essentially macrodefect free. Unfortunately, an important class of such defects—macroporosity, misruns, and pipe shrinkage—are all functions of the interactions of free surface flow, heat transfer, and solidication in complex geometries. Because these defects arise as an interaction of the preceding continuum phenomena, genuinely predictive models of these defects must represent these interactions explicitly. This work describes an attempt to model the formation of macrodefects explicitly as a function of the interacting continuum phenomena in arbitrarily complex three-dimensional geometries. The computational approach exploits a compatible set of finite volume procedures extended to unstructured meshes. The implementation of the model is described together with its testing and a measure of validation. The model demonstrates the potential to predict reliably shrinkage macroporosity, misruns, and pipe shrinkage directly as a result of interactions among free-surface fluid flow, heat transfer, and solidification.

Model sensitivity and uncertainty analysis using roadside air quality measurements

Most of the air quality modelling work has been so far oriented towards deterministic simulations of ambient pollutant concentrations. This traditional approach, which is based on the use of one selected model and one data set of discrete input values, does not reflect the uncertainties due to errors in model formulation and input data. Given the complexities of urban environments and the inherent limitations of mathematical modelling, it is unlikely that a single model based on routinely available meteorological and emission data will give satisfactory short-term predictions. In this study, different methods involving the use of more than one dispersion model, in association with different emission simulation methodologies and meteorological data sets, were explored for predicting best CO and benzene estimates, and related confidence bounds. The different approaches were tested using experimental data obtained during intensive monitoring campaigns in busy street canyons in Paris, France. Three relative simple dispersion models (STREET, OSPM and AEOLIUS) that are likely to be used for regulatory purposes were selected for this application. A sensitivity analysis was conducted in order to identify internal model parameters that might significantly affect results. Finally, a probabilistic methodology for assessing urban air quality was proposed.

Parametrical modeling and design optimization of blood plasma separation device with microchannel mechanism

This paper presents an analysis of biofluid behavior in a T-shaped microchannel device and a design optimization for improved biofluid performance in terms of particle liquid separation. The biofluid is modeled with single phase shear rate non-Newtonian flow with blood property. The separation of red blood cell from plasma is evident based on biofluid distribution in the microchannels against various relevant effects and findings, including Zweifach-Fung bifurcation law, Fahraeus effect, Fahraeus-Lindqvist effect and cell free phenomenon. The modeling with the initial device shows that this T-microchannel device can separate red blood cell from plasma but the separation efficiency among different bifurcations varies largely. In accordance with the imbalanced performance, a design optimization is conducted. This includes implementing a series of simulations to investigate the effect of the lengths of the main and branch channels to biofluid behavior and searching an improved design with optimal separation performance. It is found that changing relative lengths of branch channels is effective to both uniformity of flow rate ratio among bifurcations and reduction of difference of the flow velocities between the branch channels, whereas extending the length of the main channel from bifurcation region is only effective for uniformity of flow rate ratio.

Volcanic ash supply to the surface ocean – remote sensing of biological responses and their wider biogeochemical significance

Transient micronutrient enrichment of the surface ocean can enhance phytoplankton growth rates and alter microbial community structure with an ensuing spectrum of biogeochemical feedbacks. Strong phytoplankton responses to micronutrients supplied by volcanic ash have been reported recently. Here we: (i) synthesize findings from these recent studies; (ii) report the results of a new remote sensing study of ash fertilization; and (iii) calculate theoretical bounds of ash-fertilized carbon export. Our synthesis highlights that phytoplankton responses to ash do not always simply mimic that of iron amendment; the exact mechanisms for this are likely biogeochemically important but are not yet well understood. Inherent optical properties of ash-loaded seawater suggest rhyolitic ash biases routine satellite chlorophyll-a estimation upwards by more than an order of magnitude for waters with <0.1 mg chlorophyll-a m-3, and less than a factor of 2 for systems with >0.5 mg chlorophyll-a m-3. For this reason post-ash-deposition chlorophyll-a changes in oligotrophic waters detected via standard Case 1 (open ocean) algorithms should be interpreted with caution. Remote sensing analysis of historic events with a bias less than a factor of 2 provided limited stand-alone evidence for ash-fertilization. Confounding factors were poor coverage, incoherent ash dispersal, and ambiguity ascribing biomass changes to ash supply over other potential drivers. Using current estimates of iron release and carbon export efficiencies, uncertainty bounds of ash-fertilized carbon export for 3 events are presented. Patagonian iron supply to the Southern Ocean from volcanic eruptions is less than that of windblown dust on thousand year timescales but can dominate supply at shorter timescales. Reducing uncertainties in remote sensing of phytoplankton response and nutrient release from ash are avenues for enabling assessment of the oceanic response to large-scale transient nutrient enrichment.

Evolution of the Diatoms: VIII. Re-Examination of the SSU-Rrna Gene Using Multiple Outgroups and a Cladistic Analysis of Valve Features.

The resolution of the SSU rRNA gene for phylogenetic analysis in the diatoms has been evaluated by Theriot et al. who claimed that the SSU rRNA gene could not be used to resolve the monophyly of the three diatoms classes described by Medlin and Kaczmarska. Although they used both only bolidomonads and heterokonts as outgroups, they did not explore outgroups further away than the heterokonts. In this study, the use of the multiple outgroups inside and outside the heterokonts with the rRNA gene for recovering the three monophyletic clades at the class level is evaluated. Trees with multiple outgroups ranging from only bolidophytes to Bacteria and Archea were analyzed with Bayesian and Maximum Likelihood analyses and two data sets were recovered with the classes being monophyletic. Other data sets were analyzed with non-weighted and weighted maximum parsimony. The latter reduced the number of clades and lengthened branch lengths between the clades. One data set using a weighted analysis recovered the three classes as monophyletic. Taking only bolidophytes as the only outgroup never produced monophyletic clades. Multiple outgroups including many heterokonts and certain members of the crown group radiation recovered monophyletic clades. The three classes can be defined by clear morphological differences primarily based on auxospore ontogeny and envelope structure, the presence or absence of a structure (tube process or sternum) associated with the annulus and the location of the cribrum in those genera with loculate areolae. A cladistic analysis of some of these features is presented and recovers the three classes.

The Relationship between Hospital Infection Surveillance and Control Activities and Antibiotic Resistant Pathogen Rates

Objective: The purpose of the study was to examine the relationship of surveillance and control activities in Canadian hospitals with rates of nosocomial methicillin-resistant S. aureus (MRSA), C. difficile associated diarrhea (CDAD), and vancomycin-resistant Enterococcus (VRE). Methods: Surveys were sent to Infection Control programs in hospitals that participated in an earlier survey of infection control practices in Canadian acute care hospitals. Results: One hundred and twenty of 145 (82.8%) hospitals responded to the survey. The mean MRSA rate was 2.0 (SD 2.9) per 1,000 admissions, the mean CDAD rate was 3.8 (SD 4.3), and the mean VRE rate was 0.4 (SD 1.5). Multiple stepwise regression analysis found hospitals that reported infection rates by specific risk groups (r = - 0.27, p < 0.01) and that kept attendance records of infection control teaching activities (r = - 0.23, p < 0.01) were associated with lower MRSA rates. Multiple stepwise regression analysis found larger hospitals (r = 0.25, p < 0.01) and hospitals where infection control committees or staff had the direct authority to close a ward or unit to further admissions due to outbreaks (r = 0.22, p < 0.05) were associated with higher CDAD rates. Multiple logistic regression analysis found larger hospitals (OR = 1.6, CI 1.2 - 2.0, p = 0.003) and teaching hospitals (OR = 3.7, CI 1.2 - 11.8, p = 0.02) were associated with the presence of VRE. Hospitals were less likely to have VRE when infection control staff frequently contacted physicians and nurses for reports of new infections (OR = 0.5, CI 0.3 - 0.7, p = 0.02) and there were in-service programs for updating nursing and ancillary staff on current infection control practices (OR = 0.2, CI 0.1 - 0.7, p = 0.01). Conclusions: Surveillance and control activities were associated with MRSA and CDAD rates and the presence of VRE. Surveillance and control activities might be especially beneficial in large and teaching hospitals.

High-resolution Keck I spectroscopy of Galactic halo post-asymptotic giant branch stars

Absolute and differential abundance analyses have been performed from high-resolution, high signal-to-noise ratio optical (Keck I) spectra for three evolved Galactic halo stars, namely PG 1704 + 222, HD 341617 and LSIV -0401. Their derived atmospheric parameters indicate that all three objects are undergoing a post-asymptotic giant branch (post-AGB) phase of evolution. A differential abundance analysis reveals HD 341617 as having a mild carbon deficiency of 0.74 dex, possibly due to the star having evolved off the AGB before the onset of the third dredge-up. Although such carbon underabundances are typical of hot post-AGB objects, the same trend is not observed in PG 1704 + 222, where the carbon abundance is found to be consistent with those derived for nitrogen and oxygen. Hence, a dredge-up scenario need not be invoked to explain the chemical composition of PG 1704 + 222. For LSIV -0401 no iron deficiency is apparent relative to magnesium and silicon, and hence a gas- dust separation event in the AGB progenitor need not be invoked for this star.

High-resolution spectroscopic observations of post-asymptotic giant branch candidates from the Edinburgh-Cape Survey

High spectral resolution ( R similar to 40 000) and signal-to-noise optical spectra, obtained at the Very Large Telescope ( VLT), are presented for three post-asymptotic giant branch ( AGB) candidates selected from the Edinburgh-Cape ( EC) Faint Blue Object Survey. The stellar atmospheric parameters and chemical compositions, derived using sophisticated non-local thermodynamic equilibrium calculations, reveal that EC 14102-1337 and EC 20068-7324 are both in an evolved post-horizontal branch ( HB) evolutionary state. However, EC 11507-2253 is most likely a post-AGB star.