Ulkoistettujen toimintojen hankintavaiheen kehittäminen

Arvioiden mukaan jopa kaksi kolmesta ulkoistuksesta epäonnistuu. Tällä tutkimuksella halutaan osaltaan selvittää tähän syitä. Tutkimus tarkentuu ulkoistuksen hankintavaiheeseen ja tarkastelee sen tyypillisiä kehitys kohteita. Tutkimukseen osallistui 25 Suomessa toimivaa suurtatai keskisuurta yritystä useilta eri toimialoilta. Kohdeyritysten toteuttamistaja vielä suunnitteilla olevista ulkoistusprojekteista kerättiin tietoa haastattelemalla yritysten henkilöitä, jotka olivat itse olleet mukana toteutuneissa ulkoistusprojekteissa. Haastatteluissa käytiin muun muassa tarkemmin läpi yhteensä 40 toteutunutta ulkoistusprojektia. Ulkoistamisen hankintavaiheesta luotiin tätä tutkimusta varten viisivaiheinen prosessimalli. Sen jälkeen kirjallisuudesta sekä aikaisemmista tutkimuksista etsittiin tietoa siitä, miten ulkoistuksen hankintavaiheessa tulisi menetellä. Vertaamalla haastatteluissa ilmi tulleita asioita kirjallisuuden esittämään teoriaan sekä aiemmissa tutkimuksissa esitettyihin havaintoihin löydettiin kohdeyritysten toteuttamien ulkoistusten hankintavaiheesta 13 selkeää kehityskohdetta. Tyypillisten kehityskohtien tunnistaminen mandollistaa näiden haasteiden huomioimisen ulkoistusprojektien suunnittelussa ja vähentää siten projektin epäonnistumisen riskiä. Lista tunnistetuista kehityskohteista muodostaa lähtökohdan yritysten oman ulkoistamistoiminnan kehittämiselle tarjoamalla listan osa-alueista, joiden toimintaa on syytä tarkastella lähemmin.

Integration in strategic alliances : a conceptual framework of IT use in marketing as NPD key factor

En una economia basada en el coneixement, la innovació del producte es considera un factor clau a l'hora de determinar la competitivitat, la productivitat i el creixement d'una companyia. No obstant això, l'experiència de les companyies demostra la necessitat d'un nou model de gestió de la innovació del producte: una gestió basada en el màrqueting, en què la cooperació i l'ús intensiu de les tecnologies de la informació i de la comunicació (TIC) són especialment importants. En els darrers anys, la bibliografia sobre màrqueting ha analitzat el paper de la cooperació en l'èxit del procés d'innovació. No obstant això, fins ara pocs treballs han estudiat el paper que té l'ús de les TIC en el màrqueting en l'èxit del desenvolupament de nous productes (NPD, New Product Development en anglès). És una omissió curiosa, tenint en compte que el nou entorn competitiu és definit per una economia i una societat basades principalment en l'ús intensiu de les TIC i del coneixement. L'objectiu d'aquest treball és investigar el paper que l'ús de les TIC en el màrqueting té en el procés de desenvolupament de nous productes, com a element que reforça la integració d'agents al projecte, afavorint l'establiment de relacions dirigides a la cooperació i l'adquisició d'intel·ligència de mercat útil en el procés de desenvolupament de nous productes. L'estudi d'una mostra de 2.038 companyies de tots els sectors de l'activitat econòmica a Catalunya ens permet contrastar hipòtesis inicials i establir un perfil de companyia innovadora basat en les importants relacions que hi ha entre la innovació, l'ús de TIC en el màrqueting i la integració. Sobresurten dues idees en la nostra anàlisi. En primer lloc, l'ús intensiu de les TIC en el màrqueting fa que la companyia sigui més innovadora, ja que percep que el seu ús ajuda a superar barreres a la innovació i accelera els processos, que es tornen més eficients. En segon lloc, incrementant l'ús de les TIC en el màrqueting es fa augmentar la predisposició de la companyia a integrar agents particulars en l'entorn de negoci en el desenvolupament del procés d'innovació i a col·laborar-hi, de manera que es millora el grau d'adaptació del nou producte a les demandes del mercat.

Measuring the relative effect of factors affecting species distribution model predictions

1. Species distribution models are increasingly used to address conservation questions, so their predictive capacity requires careful evaluation. Previous studies have shown how individual factors used in model construction can affect prediction. Although some factors probably have negligible effects compared to others, their relative effects are largely unknown. 2. We introduce a general "virtual ecologist" framework to study the relative importance of factors involved in the construction of species distribution models. 3. We illustrate the framework by examining the relative importance of five key factors-a missing covariate, spatial autocorrelation due to a dispersal process in presences/absences, sample size, sampling design and modeling technique-in a real study framework based on plants in a mountain landscape at regional scale, and show that, for the parameter values considered here, most of the variation in prediction accuracy is due to sample size and modeling technique. Contrary to repeatedly reported concerns, spatial autocorrelation has only comparatively small effects. 4. This study shows the importance of using a nested statistical framework to evaluate the relative effects of factors that may affect species distribution models.

Bunch frequency multiplication by RF injection into an isochronous ring

La collaboration CLIC (Compact LInear Collider, collisionneur linéaire compact) étudie la possibilité de réaliser un collisionneur électron-positon linéaire à haute énergie (3 TeV dans le centre de masse) et haute luminosité (1034 cm-2s-1), pour la recherche en physique des particules. Le projet CLIC se fonde sur l'utilisation de cavités accélératrices à haute fréquence (30 GHz). La puissance nécessaire à ces cavités est fournie par un faisceau d'électrons de basse énergie et de haute intensité, appelé faisceau de puissance, circulant parallèlement à l'accélérateur linéaire principal (procédé appelé « Accélération à Double Faisceau »). Dans ce schéma, un des principaux défis est la réalisation du faisceau de puissance, qui est d'abord généré dans un complexe accélérateur à basse fréquence, puis transformé pour obtenir une structure temporelle à haute fréquence nécessaire à l'alimentation des cavités accélératrices de l'accélérateur linéaire principal. La structure temporelle à haute fréquence des paquets d'électrons est obtenue par le procédé de multiplication de fréquence, dont la manipulation principale consiste à faire circuler le faisceau d'électrons dans un anneau isochrone en utilisant des déflecteurs radio-fréquence (déflecteurs RF) pour injecter et combiner les paquets d'électrons. Cependant, ce type de manipulation n'a jamais été réalisé auparavant et la première phase de la troisième installation de test pour CLIC (CLIC Test Facility 3 ou CTF3) a pour but la démonstration à faible charge du procédé de multiplication de fréquence par injection RF dans un anneau isochrone. Cette expérience, qui a été réalisée avec succès au CERN au cours de l'année 2002 en utilisant une version modifiée du pré-injecteur du grand collisionneur électron-positon LEP (Large Electron Positron), est le sujet central de ce rapport. L'expérience de combinaison des paquets d'électrons consiste à accélérer cinq impulsions dont les paquets d'électrons sont espacés de 10 cm, puis à les combiner dans un anneau isochrone pour obtenir une seule impulsion dont les paquets d'électrons sont espacés de 2 cm, multipliant ainsi la fréquence des paquets d'électrons, ainsi que la charge par impulsion, par cinq. Cette combinaison est réalisée au moyen de structures RF résonnantes sur un mode déflecteur, qui créent dans l'anneau une déformation locale et dépendante du temps de l'orbite du faisceau. Ce mécanisme impose plusieurs contraintes de dynamique de faisceau comme l'isochronicité, ainsi que des tolérances spécifiques sur les paquets d'électrons, qui sont définies dans ce rapport. Les études pour la conception de la Phase Préliminaire du CTF3 sont détaillées, en particulier le nouveau procédé d'injection avec les déflecteurs RF. Les tests de haute puissance réalisés sur ces cavités déflectrices avant leur installation dans l'anneau sont également décrits. L'activité de mise en fonctionnement de l'expérience est présentée en comparant les mesures faites avec le faisceau aux simulations et calculs théoriques. Finalement, les expériences de multiplication de fréquence des paquets d'électrons sont décrites et analysées. On montre qu'une très bonne efficacité de combinaison est possible après optimisation des paramètres de l'injection et des déflecteurs RF. En plus de l'expérience acquise sur l'utilisation de ces déflecteurs, des conclusions importantes pour les futures activités CTF3 et CLIC sont tirées de cette première démonstration de la multiplication de fréquence des paquets d'électrons par injection RF dans un anneau isochrone.<br/><br/>The Compact LInear Collider (CLIC) collaboration studies the possibility of building a multi-TeV (3 TeV centre-of-mass), high-luminosity (1034 cm-2s-1) electron-positron collider for particle physics. The CLIC scheme is based on high-frequency (30 GHz) linear accelerators powered by a low-energy, high-intensity drive beam running parallel to the main linear accelerators (Two-Beam Acceleration concept). One of the main challenges to realize this scheme is to generate the drive beam in a low-frequency accelerator and to achieve the required high-frequency bunch structure needed for the final acceleration. In order to provide bunch frequency multiplication, the main manipulation consists in sending the beam through an isochronous combiner ring using radio-frequency (RF) deflectors to inject and combine electron bunches. However, such a scheme has never been used before, and the first stage of the CLIC Test Facility 3 (CTF3) project aims at a low-charge demonstration of the bunch frequency multiplication by RF injection into an isochronous ring. This proof-of-principle experiment, which was successfully performed at CERN in 2002 using a modified version of the LEP (Large Electron Positron) pre-injector complex, is the central subject of this report. The bunch combination experiment consists in accelerating in a linear accelerator five pulses in which the electron bunches are spaced by 10 cm, and combining them in an isochronous ring to obtain one pulse in which the electron bunches are spaced by 2 cm, thus achieving a bunch frequency multiplication of a factor five, and increasing the charge per pulse by a factor five. The combination is done by means of RF deflecting cavities that create a time-dependent bump inside the ring, thus allowing the interleaving of the bunches of the five pulses. This process imposes several beam dynamics constraints, such as isochronicity, and specific tolerances on the electron bunches that are defined in this report. The design studies of the CTF3 Preliminary Phase are detailed, with emphasis on the novel injection process using RF deflectors. The high power tests performed on the RF deflectors prior to their installation in the ring are also reported. The commissioning activity is presented by comparing beam measurements to model simulations and theoretical expectations. Eventually, the bunch frequency multiplication experiments are described and analysed. It is shown that the process of bunch frequency multiplication is feasible with a very good efficiency after a careful optimisation of the injection and RF deflector parameters. In addition to the experience acquired in the operation of these RF deflectors, important conclusions for future CTF3 and CLIC activities are drawn from this first demonstration of the bunch frequency multiplication by RF injection into an isochronous ring.<br/><br/>La collaboration CLIC (Compact LInear Collider, collisionneur linéaire compact) étudie la possibilité de réaliser un collisionneur électron-positon linéaire à haute énergie (3 TeV) pour la recherche en physique des particules. Le projet CLIC se fonde sur l'utilisation de cavités accélératrices à haute fréquence (30 GHz). La puissance nécessaire à ces cavités est fournie par un faisceau d'électrons de basse énergie et de haut courant, appelé faisceau de puissance, circulant parallèlement à l'accélérateur linéaire principal (procédé appelé « Accélération à Double Faisceau »). Dans ce schéma, un des principaux défis est la réalisation du faisceau de puissance, qui est d'abord généré dans un complexe accélérateur à basse fréquence, puis transformé pour obtenir une structure temporelle à haute fréquence nécessaire à l'alimentation des cavités accélératrices de l'accélérateur linéaire principal. La structure temporelle à haute fréquence des paquets d'électrons est obtenue par le procédé de multiplication de fréquence, dont la manipulation principale consiste à faire circuler le faisceau d'électrons dans un anneau isochrone en utilisant des déflecteurs radio-fréquence (déflecteurs RF) pour injecter et combiner les paquets d'électrons. Cependant, ce type de manipulation n'a jamais été réalisé auparavant et la première phase de la troisième installation de test pour CLIC (CLIC Test Facility 3 ou CTF3) a pour but la démonstration à faible charge du procédé de multiplication de fréquence par injection RF dans un anneau isochrone. L'expérience consiste à accélérer cinq impulsions, puis à les combiner dans un anneau isochrone pour obtenir une seule impulsion dans laquelle la fréquence des paquets d'électrons et le courant sont multipliés par cinq. Cette combinaison est réalisée au moyen de structures déflectrices RF qui créent dans l'anneau une déformation locale et dépendante du temps de la trajectoire du faisceau. Les résultats de cette expérience, qui a été réalisée avec succès au CERN au cours de l?année 2002 en utilisant une version modifiée du pré-injecteur du grand collisionneur électron-positon LEP (Large Electron Positon), sont présentés en détail.

Regional Innovation Policy: Effect on SMEs in Five EU-Regions

Valtaosa eurooppalaisista yrityksistä on pk-yrityksiä, mutta tästä huolimatta seudullisen innovaatiopolitiikan vaikutusta juuri pk-yrityksiin on tutkittu melko vähän. Tämän tutkimuksen tarkoituksena on luoda yleiskuva pk-yritysten näkemykseen oman seutunsa innovaatiopolitiikasta viidellä EU:n alueella sijaitsevalla seudulla. Kirjallisuuden perusteella rakennettiin seudullista innovaatiopolitiikkaa kuvaava kysely, johon joukko pk-yrityksiä viideltä seudulta vastasi. Kyselyn tulokset kuvailtiin graafisesti, minkä lisäksi etsittiin vastauksiin vaikuttaneita tekijöitä ja yhteyksiä yritysten vastausten välillä. Tutkimus oli luonteeltaan lähinnä kvantitatiivinen. Tutkimus osoittaa, että seudullisessa innovaatiopolitiikassa on vielä paljon kehitettävää, jotta se tavoittaisi kattavasti pk-yritykset. Pk-yritysten tietoisuutta tulisi lisätä, sillä nämä eivät yleisesti ottaen näytä pitävän seudullista innovaatiopolitiikkaa menetykseen vaikuttavana tekijänä tai siihen liittyviä yhteistyömahdollisuuksia tärkeinä omalle toiminnalleen. Erot innovaatiotoiminnan seudullisessa roolissa tulivat esiin tuloksissa. Yritysten vastauksia selittäviä tekijöitä löydettiin, samoin yhteyksiä vastausten välillä, mutta varsinaisten johtopäätösten tekeminen edellyttänee laajempaa tutkimusta.

Three essays on the determinants of output, inflation and interest rates

Résumé: Output, inflation and interest rates are key macroeconomic variables, in particular for monetary policy. In modern macroeconomic models they are driven by random shocks which feed through the economy in various ways. Models differ in the nature of shocks and their transmission mechanisms. This is the common theme underlying the three essays of this thesis. Each essay takes a different perspective on the subject: First, the thesis shows empirically how different shocks lead to different behavior of interest rates over the business cycle. For commonly analyzed shocks (technology and monetary policy errors), the patterns square with standard models. The big unknown are sources of inflation persistence. Then the thesis presents a theory of monetary policy, when the central bank can better observe structural shocks than the public. The public will then seek to infer the bank's extra knowledge from its policy actions and expectation management becomes a key factor of optimal policy. In a simple New Keynesian model, monetary policy becomes more concerned with inflation persistence than otherwise. Finally, the thesis points to the huge uncertainties involved in estimating the responses to structural shocks with permanent effects.

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

Expresiones para la determinación del factor de fricción en ríos de fuerte pendiente

Con base en una selección de 145 datos pertenecientes a ríos de montaña de fuerte pendiente (³ 1%) se han desarrollado cinco expresiones para determinar el factor de fricción de Darcy-Weisbach. La primera expresión se fundamenta en la aplicación para flujo turbulento rugoso en lámina libre de la ley semilogarítmica de Prandtl-Kárman, que es función de la sumersión relativa (relación entre el calado medio y la rugosidad equivalente). La segunda y tercera corresponden a correciones de la primera para flujo macrorrugoso, propuestas por Thompson y Campbell (1979) y Aguirre-Pe y Fuentes (1990) respectivamente. La cuarta ecuación consiste una en potencia de la sumersión relativa, mientras que la quinta corrige la fórmula anterior incorporando una potencia de la pendiente, tal y como propugnan Meunier (1989) y Rickenmann (1990). Las expresiones derivadas presentan un ajuste significativo, si se tienen en cuenta las limitaciones hidrométricas existentes en ríos de material grueso y fuerte pendiente. Destaca el mayor ajuste conseguido con las ecuaciones con las ecuaciones del tipo potencial frente a las del tipo semilogarítmico. Se ha encontrado, asimismo, una capacidad de predicción ligeramente superior en aquellas expresiones que incluyen modificaciones respecto a la ecuación original, ecuaciones del tipo segundo, tercero y quinto anteriormente indicado.

The transtheoretical model in weight management: Validation of the Processes of Change Questionnaire

Objective: The processes of change implied in weight management remain unclear. The present study aimed to identify these processes by validating a questionnaire designed to assess processes of change (the P-Weight) in line with the transtheoretical model. The relationship of processes of change with stages of change and other external variables is also examined. Methods: Participants were 723 people from community and clinical settings in Barcelona. Their mean age was 32.07 (SD = 14.55) years; most of them were women (75.0%), and their mean BMI was 26.47 (SD = 8.52) kg/m2. They all completed the P-Weight and the stages of change questionnaire (SWeight), both applied to weight management, as well as two subscales from the Eating Disorders Inventory-2 and Eating Attitudes Test-40 questionnaires about the concern with dieting. Results: A 34-item version of the PWeight was obtained by means of a refinement process. The principal components analysis applied to half of the sample identified four processes of change. A confirmatory factor analysis was then carried out with the other half of the sample, revealing that the model of four freely correlated first-order factors showed the best fit (GFI = 0.988, AGFI = 0.986, NFI = 0.986, and SRMR = 0.0559). Corrected item-total correlations (0.322-0.865) and Cronbach"s alpha coefficients (0.781-0.960) were adequate. The relationship between the P-Weight and the S-Weight and the concern with dieting measures from other questionnaires supported the validity of the scale. Conclusion: The study identified processes of change involved in weight management and reports the adequate psychometric properties of the P-Weight. It also reveals the relationship between processes and stages of change and other external variables.

A diet enriched with cocoa prevents IgE synthesis in a rat allergy model

Previous studies in young rats reported the impact of cocoa intake on healthy immune status and allow suggesting it may have a role in the prevention of some immune-mediated diseases. The aim of this study was to ascertain the effect of a cocoa diet in a model of allergy in young rats. Three-week-old Brown Norway rats were immunized by i.p. injection of ovalbumin (OVA) with alum as adjuvant and Bordetella pertussis toxin. During the next 4 weeks rats received either a cocoa diet (containing 0.2% polyphenols, w/w) or a standard diet. Animals fed a standard diet showed high concentrations of anti-OVA IgG1, IgG2a, IgG2b and high anti-OVA IgE titres, which is the antibody involved in allergic response. In contrast, animals fed a cocoa diet showed significantly lower concentrations of anti-OVA IgG1 and IgG2a antibodies. Interestingly, the cocoa diet prevented anti-OVA IgE synthesis and decreased total serum IgE concentration. Analysis of cytokine production in lymph node cells at the end of the study revealed that, in this compartment, the cocoa diet decreased the tumor necrosis factor (TNF) - alpha and the interleukin (IL) -10 secretion but not IL-4 production. In conclusion, a cocoa-enriched diet in young rats produces an immunomodulatory effect that prevents anti-allergen IgE synthesis, suggesting a potential role for cocoa flavonoids in the prevention or treatment of allergic diseases.

Examining the virulence of Candida albicans transcription factor mutants using Galleria mellonella and mouse infection models.

The aim of the present study was to identify Candida albicans transcription factors (TFs) involved in virulence. Although mice are considered the gold-standard model to study fungal virulence, mini-host infection models have been increasingly used. Here, barcoded TF mutants were first screened in mice by pools of strains and fungal burdens (FBs) quantified in kidneys. Mutants of unannotated genes which generated a kidney FB significantly different from that of wild-type were selected and individually examined in Galleria mellonella. In addition, mutants that could not be detected in mice were also tested in G. mellonella. Only 25% of these mutants displayed matching phenotypes in both hosts, highlighting a significant discrepancy between the two models. To address the basis of this difference (pool or host effects), a set of 19 mutants tested in G. mellonella were also injected individually into mice. Matching FB phenotypes were observed in 50% of the cases, highlighting the bias due to host effects. In contrast, 33.4% concordance was observed between pool and single strain infections in mice, thereby highlighting the bias introduced by the "pool effect." After filtering the results obtained from the two infection models, mutants for MBF1 and ZCF6 were selected. Independent marker-free mutants were subsequently tested in both hosts to validate previous results. The MBF1 mutant showed impaired infection in both models, while the ZCF6 mutant was only significant in mice infections. The two mutants showed no obvious in vitro phenotypes compared with the wild-type, indicating that these genes might be specifically involved in in vivo adapt.

Positive Outcomes Influence the Rate and Time to Publication, but Not the Impact Factor of Publications of Clinical Trial Results

Objectives: Publication bias may affect the validity of evidence based medical decisions. The aim of this study is to assess whether research outcomes affect the dissemination of clinical trial findings, in terms of rate, time to publication, and impact factor of journal publications. Methods and Findings: All drug-evaluating clinical trials submitted to and approved by a general hospital ethics committee between 1997 and 2004 were prospectively followed to analyze their fate and publication. Published articles were identified by searching Pubmed and other electronic databases. Clinical study final reports submitted to the ethics committee, final reports synopses available online and meeting abstracts were also considered as sources of study results. Study outcomes were classified as positive (when statistical significance favoring experimental drug was achieved), negative (when no statistical significance was achieved or it favored control drug) and descriptive (for non-controlled studies). Time to publication was defined as time from study closure to publication. A survival analysis was performed using a Cox regression model to analyze time to publication. Journal impact factors of identified publications were recorded. Publication rate was 48·4% (380/785). Study results were identified for 68·9% of all completed clinical trials (541/785). Publication rate was 84·9% (180/212) for studies with results classified as positive and 68·9% (128/186) for studies with results classified as negative (p<0·001). Median time to publication was 2·09 years (IC95 1·61-2·56) for studies with results classified as positive and 3·21 years (IC95 2·69-3·70) for studies with results classified as negative (hazard ratio 1·99 (IC95 1·55-2·55). No differences were found in publication impact factor between positive (median 6·308, interquartile range: 3·141-28·409) and negative result studies (median 8·266, interquartile range: 4·135-17·157). Conclusions: Clinical trials with positive outcomes have significantly higher rates and shorter times to publication than those with negative results. However, no differences have been found in terms of impact factor.

Automatic Segmentation of the Eye in 3D Magnetic Resonance Imaging: A Novel Statistical Shape Model for Treatment Planning of Retinoblastoma.

PURPOSE: Proper delineation of ocular anatomy in 3-dimensional (3D) imaging is a big challenge, particularly when developing treatment plans for ocular diseases. Magnetic resonance imaging (MRI) is presently used in clinical practice for diagnosis confirmation and treatment planning for treatment of retinoblastoma in infants, where it serves as a source of information, complementary to the fundus or ultrasonographic imaging. Here we present a framework to fully automatically segment the eye anatomy for MRI based on 3D active shape models (ASM), and we validate the results and present a proof of concept to automatically segment pathological eyes. METHODS AND MATERIALS: Manual and automatic segmentation were performed in 24 images of healthy children's eyes (3.29 ± 2.15 years of age). Imaging was performed using a 3-T MRI scanner. The ASM consists of the lens, the vitreous humor, the sclera, and the cornea. The model was fitted by first automatically detecting the position of the eye center, the lens, and the optic nerve, and then aligning the model and fitting it to the patient. We validated our segmentation method by using a leave-one-out cross-validation. The segmentation results were evaluated by measuring the overlap, using the Dice similarity coefficient (DSC) and the mean distance error. RESULTS: We obtained a DSC of 94.90 ± 2.12% for the sclera and the cornea, 94.72 ± 1.89% for the vitreous humor, and 85.16 ± 4.91% for the lens. The mean distance error was 0.26 ± 0.09 mm. The entire process took 14 seconds on average per eye. CONCLUSION: We provide a reliable and accurate tool that enables clinicians to automatically segment the sclera, the cornea, the vitreous humor, and the lens, using MRI. We additionally present a proof of concept for fully automatically segmenting eye pathology. This tool reduces the time needed for eye shape delineation and thus can help clinicians when planning eye treatment and confirming the extent of the tumor.

El debat i l"evolució conceptual de la carpeta d"aprenentatge universitària: un reflex del procès de canvi del model educatiu

[cat] La carpeta d'aprenentatge representa un punt de trobada dels grans temes que han ocupat la Didàctica d'ençà dels anys 90 del segle passat: el caràcter formatiu de l'avaluació, l'assumpte de les competències, la metacognició i el pensament crític de l'estudiant, el paper desenvolupat per les TIC, i la concepció d'un aprenentatge col·laboratiu i plantejat a llarg termini. En aquest article de revisió, hom estudia com aquests temes s'han concretat en la carpeta d'aprenentatge i n'han determinat la seva evolució. [eng] The learning portofolio represents a meeting point for the big questions than have concernend teaching since the 1990s: the formative character of the assessment, the issue of competencies, metacognition and the students's critical thinking, the role played by ICTs, and the idea of collaborative learning considered in the long term. The article looks at how these subjects have taken shape in the learning portofolio and how they have determinded its evolutin.

Is diabetes a risk factor for a severe clinical presentation of dengue?--review and meta-analysis.

BACKGROUND: The mean age of acute dengue has undergone a shift towards older ages. This fact points towards the relevance of assessing the influence of age-related comorbidities, such as diabetes, on the clinical presentation of dengue episodes. Identification of factors associated with a severe presentation is of high relevance, because timely treatment is the most important intervention to avert complications and death. This review summarizes and evaluates the published evidence on the association between diabetes and the risk of a severe clinical presentation of dengue. METHODOLOGY/FINDINGS: A systematic literature review was conducted using the MEDLINE database to access any relevant association between dengue and diabetes. Five case-control studies (4 hospital-based, 1 population-based) compared the prevalence of diabetes (self-reported or abstracted from medical records) of persons with dengue (acute or past; controls) and patients with severe clinical manifestations. All except one study were conducted before 2009 and all studies collected information towards WHO 1997 classification system. The reported odds ratios were formally summarized by random-effects meta-analyses. A diagnosis of diabetes was associated with an increased risk for a severe clinical presentation of dengue (OR 1.75; 95% CI: 1.08-2.84, p = 0.022). CONCLUSIONS/SIGNIFICANCE: Large prospective studies that systematically and objectively obtain relevant signs and symptoms of dengue fever episodes as well as of hyperglycemia in the past, and at the time of dengue diagnosis, are needed to properly address the effect of diabetes on the clinical presentation of an acute dengue fever episode. The currently available epidemiological evidence is very limited and only suggestive. The increasing global prevalence of both dengue and diabetes justifies further studies. At this point, confirmation of dengue infection as early as possible in diabetes patients with fever if living in dengue endemic regions seems justified. The presence of this co-morbidity may warrant closer observation for glycemic control and adapted fluid management to diminish the risk for a severe clinical presentation of dengue.