Diffusion and chemical reaction in the porous structures of solid oxide fuel cells

The Rolls-Royce Integrated-Planar Solid Oxide Fuel Cell (IP-SOFC) consists of ceramic modules which have electrochemical cells printed on the outer surfaces. The cathodes are the outermost layer of each cell and are supplied with oxygen from air flowing over the outside of the module. The anodes are in direct contact with the ceramic structure and are supplied with fuel from internal gas channels. Natural gas is reformed into hydrogen for use by the fuel cells in a separate reformer module of similar design except that the fuel cells are replaced by a reforming catalyst layer. The performance of the modules is intrinsically linked to the behaviour of the gas flows within their porous structures. Because the porous layers are very thin, a one-dimensional flow model provides a good representation of the flow property variations between fuel channel and fuel cell or reforming catalyst. The multi-component convective-diffusive flows are simulated using a new theory of flow in porous material, the Cylindrical Pore Interpolation Model. The effects of the catalysed methane reforming and water-gas shift chemical reactions are also considered using appropriate kinetic models. It is found that the shift reaction, which is catalysed by the anode material, has certain beneficial effects on the fuel cell module performance. In the reformer module it was found that the flow resistance of the porous support structure makes it difficult to sustain a high methane conversion rate. Although the analysis is based on IP-SOFC geometry, the modelling approach and general conclusions are applicable to other types of SOFC.

EBSD characterisation of Y2Ba4CuUOx phase in melttextured YBCO with addition of depleted uranium oxide

Melt-textured YBCO samples processed with added Y2O3 and depleted uranium oxide (DU) contain nano-particles, which have been identified previously as Y2Ba4CuUOx (U-411). This phase has a cubic unit cell, which is clearly distinct from the orthorhombic Y-123 and Y-211 phases within the YBCO system. In samples with a high amount of DU addition (0.8 wt-% DU), U-2411 particles have sizes between 200 nm and several νm, so identification of the Kikuchi patterns of this phase becomes possible. Together with a parallel EDX analysis, the particles embedded in the Y-123 matrix can be identified unambiguously. In this way, a three-phase EBSD scan becomes possible, allowing also the identification of nanometre-sized particles in the sample microstructure. © 2006 IOP Publishing Ltd.

Erratum: "Zinc oxide nanostructures and high electron mobility nanocomposite thin film transistors" (IEEE Transactions on Electron Devices (2009))

In the above entitled paper (ibid., vol. 55, no. 11, pp. 3001-3011), two errors were noticed after the paper went to press. The errors are corrected here.

Flexible array sensors based on zinc oxide nanowires for touch displays

Recent efforts towards the fabrication of touch sensing systems are presented, in which zinc oxide nanowire arrays are embedded in a polymer matrix to produce an engineered composite material. In the future, these sensor systems will be fully flexible and multi-touch as intended for Nokia's 'Morph' concept device.

Catalyst-free synthesis of zinc oxide nanostructures by microheaters in the ambient environment

This paper demonstrates a catalyst-free synthesis of ZnO nanostructures using platinum microheaters under ambient environmental conditions. Different morphologies of ZnO nanostructures are synthesized from the oxidization of Zn thin film by local heating. The synthesized ZnO structures are characterized by the SEM, EDX and Raman spectra. The characterization of two shapes of Pt microheaters is investigated and the relationship between the applied heating power and ZnO nanostructures synthesis is investigated under ambient conditions. We observe that the density and morphology of ZnO nanostructures can be controlled through applied heating voltages. Furthermore, a connected composite structural (Zn-ZnO-Zn) layer is synthesized using combinative microheaters. © 2011 IEEE.

Experimental formulation of an anti fouling paint with tributyl tin oxide as toxic pigment

Results of the experimental formulation of an antifouling paint incorporating TBTO as toxic pigment are presented in this paper. Of the various resins tested, namely, phenolic, cashew nut shell liquid (CNSL), epoxy linseed oil with rosin and limed rosin, the paint composition with limed rosin gave the critical leaching rate of TBTO. Acid alkali test showed dissolution of matrix and visible migration of toxin to the surface. Accelerated corrosion tests had not recorded any signs of corrosion in panels painted with or without barrier coat. Raft exposure studies indicated that the new formulation could resist fouling accumulation on painted panels for 9 months.

Apoptotic cells induce immunosuppression through dendritic cells: Critical roles of IFN-gamma and nitric oxide

Apoptotic cells induce immunosuppression through unknown mechanisms. To identify the underlying molecular mediators, we examined how apoptotic cells induce immunoregulation by dendritic cells (DC). We found that administration of DC exposed to apoptotic c

Molecular studies on the effect of germanium oxide on sponges, corals and ascidians

The stress response, at the molecular level, of the soft corals Dendronephthya klunzingeri and Heteroxenia sp., hard corals Acropora hyacinthus and A. valenciennesi, an ascidian Symplegma sp. and sponges Latruncula cortica and Callyspongia crassa to germanium oxide (GeO sub(2)) was evaluated. Evaluation was carried out using bioindicators. such as the level of expression of each of the heat shock proteins (HSPs) and the silicatein enzyme in response to the compound. However, the expression was measured by SDS Polyacrylamide Gel Electrophoresis (SDS PAGE) and western blotting. The harmful concentration of GeO sub(2) that produced noticeable molecular changes in the studied samples during the first 6-24 hours was 6 μg/ml. The two studied soft corals as well as the ascidian responded to the harmful concentration of germanium oxide by expressing the heat-shock protein 90 (hsp90), while the two hard corals responded by expressing hsp70, C. crassa by decreasing the level of silicatein enzyme and sponge L. cortica produced no change by any of the used biomarkers, The soft coral Heteroxenia sp. was found to be sensitive to mechanical stress during the experiment and it was more sensitive to 6 μg/ml of GeO sub(2) than the other soft coral D. klunzingeri. The two studied hard corals were sensitive to mechanical stress during the experiment, but A. hyacinth us showed higher sensitivity than A. valenciennesi. However, these 2 corals displayed reverse response to GeO sub(2). Primitive evidences were found in the SDS PAGE to distinguish the tissue of the soft coral from that of the hard coral on the molecular level; the soft coral showed two prominent protein bands (45 and 50 kDa) while the two prominent protein bands for hard corals were 31 and 116 kDa.

Changes of tissue endothelin-1 and nitric oxide synthase in a sheep model of large intestinal obstruction

Large intestinal obstruction (LIO) in farm animals can cause a ischaemic necrosis of intestinal tissue, eventually leading to death. The roles of endothelin-1 (ET-1) and nitric oxide (NO) are not well understood in the process of LIO, but evidence suggests that endothelial-derived mediators may participate. In the present study, ET-1 concentration and total nitric oxide synthase (NOS) activity were measured in heart, liver, pancreas, lung and kidney in a model of LIO in sheep. Our data demonstrated that ET-1 concentration and NOS activity were altered, with significant increases of ET-1 in heart, lung and kidney and of NOS activity in pancreas and kidney, but a marked decline of NOS activity in liver (p<0.05). It is postulated that these alterations in NOS activity and ET-1 concentration may contribute to the progressive loss of organ function, and finally lead to death in LIO in sheep.

Electrical actuation and readout in a nanoelectromechanical resonator based on a laterally suspended zinc oxide nanowire.

In this paper, we present experimental results describing enhanced readout of the vibratory response of a doubly clamped zinc oxide (ZnO) nanowire employing a purely electrical actuation and detection scheme. The measured response suggests that the piezoelectric and semiconducting properties of ZnO effectively enhance the motional current for electromechanical transduction. For a doubly clamped ZnO nanowire resonator with radius ~10 nm and length ~1.91 µm, a resonant frequency around 21.4 MHz is observed with a quality factor (Q) of ~358 in vacuum. A comparison with the Q obtained in air (~242) shows that these nano-scale devices may be operated in fluid as viscous damping is less significant at these length scales. Additionally, the suspended nanowire bridges show field effect transistor (FET) characteristics when the underlying silicon substrate is used as a gate electrode or using a lithographically patterned in-plane gate electrode. Moreover, the Young's modulus of ZnO nanowires is extracted from a static bending test performed on a nanowire cantilever using an AFM and the value is compared to that obtained from resonant frequency measurements of electrically addressed clamped–clamped beam nanowire resonators.