Biased group decision-making and the effect of computer-mediated communication: separating the effects of anonymity, voting and blind picking

The influence of communication technology on group decision-making has been examined in many studies. But the findings are inconsistent. Some studies showed a positive effect on decision quality, other studies have shown that communication technology makes the decision even worse. One possible explanation for these different findings could be the use of different Group Decision Support Systems (GDSS) in these studies, with some GDSS better fitting to the given task than others and with different sets of functions. This paper outlines an approach with an information system solely designed to examine the effect of (1) anonymity, (2) voting and (3) blind picking on decision quality, discussion quality and perceived quality of information.

Evaluation of rhizobacterial colonisation and the ability to induce Globodera pallida hatch

Three bacterial isolates, SB13 (Acinetobacter sp.), SB14 (Arthrobacter sp.) and SB15 (Bacillus sp.), were previously isolated from the rhizosphere of sugar beet (Beta vulgaris ssp. vulgaris) plants and shown to increase hatch of potato cyst nematodes in vitro. In this study, the three isolates were assayed for rhizosphere competence. Each isolate was applied to seeds at each of four concentrations (105-108 CFU ml−1) and the inoculated seeds were planted in plastic microcosms containing coarse sand. All three isolates were shown to colonise the rhizosphere, although to differing degrees, with the higher inoculation densities providing significantly better colonisation. The isolates increased sugar beet root and shoot dry weight. Isolates SB14 and SB15 were analysed for their ability to induce in vivo hatch of Globodera pallida in non-sterile soil planted with sugar beet. After 4 and 6 weeks, both isolates had induced significantly greater percentage hatch compared to controls.

Improving Photovoltaics with High Luminescence Efficiency Quantum Dot Layers

A solar cell relies on its ability to turn photons into current. Because short wavelength photons are typically absorbed near the top surface of a cell, the generated charge carriers recombine before being collected. But when a layer of quantum dots (nanoscale semiconductor particles) is placed on top of the cell, it absorbs short wavelength photons and emits them into the cell at longer wavelengths, which enables more efficient carrier collection. However, the resulting power conversion efficiency of the system depends critically on the quantum dot luminescence efficiency – the nature of this relationship was previously unknown. Our calculations suggest that a quantum dot layer must have high luminescence efficiency (at least 80%) to improve the current output of existing photovoltaic (PV) cells; otherwise, it may worsen the cell’s efficiency. Our quantum dot layer (using quantum dots with over 85% quantum yield) slightly reduced the efficiency of our PV cells. We observed a decrease in short circuit current of a commercial-grade cell from 0.1977 A to 0.1826 A, a 7.6% drop, suggesting that improved optical coupling from the quantum dot emission into the solar cell is needed. With better optical coupling, we predict current enhancements between ~6% and ~8% for a solar cell that already has an antireflection coating. Such improvements could have important commercial impacts if the coating could be deployed in a scalable fashion.

Global carbon dioxide emissions from inland waters

Carbon dioxide (CO2) transfer from inland waters to the atmosphere, known as CO2 evasion, is a component of the global carbon cycle. Global estimates of CO2 evasion have been hampered, however, by the lack of a framework for estimating the inland water surface area and gas transfer velocity and by the absence of a global CO2 database. Here we report regional variations in global inland water surface area, dissolved CO2 and gas transfer velocity. We obtain global CO2 evasion rates of 1.8petagrams of carbon (Pg C) per year from streams and rivers and 0.32Pg Cyr-1 from lakes and reservoirs, where the upper and lower limits are respectively the 5th and 95th confidence interval percentiles. The resulting global evasion rate of 2.1 Pg Cyr-1 is higher than previous estimates owing to a larger stream and river evasion rate. Our analysis predicts global hotspots in stream and river evasion, with about 70 per cent of the flux occurring over just 20 per cent of the land surface. The source of inland water CO2 is still not known with certainty and new studies are needed to research the mechanisms controlling CO2 evasion globally. © 2013 Macmillan Publishers Limited. All rights reserved.

Study of gene expression in thyrotropin-stimulated thyroid cells by cDNA expression array: ID3 transcription modulating factor as an early response protein and tumor marker in thyroid carcinomas.

Induction of cell proliferation by mitogen or growth factor stimulation leads to the specific induction or repression of a large number of genes. To identify genes differentially regulated by the cAMP-dependent transduction pathway, which is poorly characterized so far, we used the cDNA expression array technology. Hybridizations of Atlas human cDNA expression arrays with (32)P-labeled cDNA probes derived from control or thyrotropin (TSH)-stimulated dog thyrocytes in primary culture generated expression profiles of hundreds of genes simultaneously. Among the genes that displayed modified expression, we selected the transcription factor ID3, whose expression was increased by a cAMP-dependent stimulus. ID3 overexpression after TSH stimulation was first verified by Northern blotting analysis, and its mRNA regulation was then investigated in response to a variety of agents acting on thyrocyte proliferation and/or differentiation. We show that: (1) ID3 mRNA induction was stronger after stimulation of the cAMP cascade, but was not restricted to this signaling pathway, as phorbol myristate ester (TPA) and insulin also stimulated mRNA accumulation; (2) in contrast, powerful mitogens for thyroid cells, epidermal growth factor and hepatocyte growth factor, did not significantly modify ID3 mRNA levels; (3) ID3 protein levels closely parallelled mRNA levels, as revealed by immunofluorescence experiments showing a nuclear signal regulated by TSH; (4) in papillary thyroid carcinomas, ID3 mRNA was downregulated. Our results suggest that ID3 expression might be more related to the differentiating process induced by TSH than to the proliferative action of this hormone.

Cross-sectional study of 168 patients with hepatorenal tyrosinaemia and implications for clinical practice

Background: Hepatorenal tyrosinaemia (Tyr 1) is a rare inborn error of tyrosine metabolism. Without treatment, patients are at high risk of developing acute liver failure, renal dysfunction and in the long run hepatocellular carcinoma. The aim of our study was to collect cross-sectional data. Methods. Via questionnaires we collected retrospective data of 168 patients with Tyr 1 from 21 centres (Europe, Turkey and Israel) about diagnosis, treatment, monitoring and outcome. In a subsequent consensus workshop, we discussed data and clinical implications. Results: Early treatment by NTBC accompanied by diet is essential to prevent serious complications such as liver failure, hepatocellular carcinoma and renal disease. As patients may remain initially asymptomatic or develop uncharacteristic clinical symptoms in the first months of life newborn mass screening using succinylacetone (SA) as a screening parameter in dried blood is mandatory for early diagnosis. NTBC-treatment has to be combined with natural protein restriction supplemented with essential amino acids. NTBC dosage should be reduced to the minimal dose allowing metabolic control, once daily dosing may be an option in older children and adults in order to increase compliance. Metabolic control is judged by SA (below detection limit) in dried blood or urine, plasma tyrosine (<400 μM) and NTBC-levels in the therapeutic range (20-40 μM). Side effects of NTBC are mild and often transient. Indications for liver transplantation are hepatocellular carcinoma or failure to respond to NTBC. Follow-up procedures should include liver and kidney function tests, tumor markers and imaging, ophthalmological examination, blood count, psychomotor and intelligence testing as well as therapeutic monitoring (SA, tyrosine, NTBC in blood). Conclusion: Based on the data from 21 centres treating 168 patients we were able to characterize current practice and clinical experience in Tyr 1. This information could form the basis for clinical practice recommendations, however further prospective data are required to underpin some of the recommendations.

Tree species-area and species-diameter relationships at three lowland rain forest sites in Sumatra

Data from three forest sites in Sumatra (Batang Ule, Pasirmayang and Tebopandak) have been analysed and compared for the effects of sample area cut-off, and tree diameter cut-off. An 'extended inverted exponential model' is shown to be well suited to fitting tree-species-area curves. The model yields species carrying capacities of 680 for Batang Ule, 380 species for Pasirmayang, and 35 for Tebopandak (tree diameter >10cm). It would seem that in terms of species carrying capacity, Tebopandak and Pasirmayang are rather similar, and both less diverse than the hilly Batang Ule site. In terms of conservation policy, this would mean that rather more emphasis should be put on conserving hilly sites on a granite substratum. For Pasirmayang with tree diameter >3cm, the asymptotic species number estimate is 567, considerably higher than the estimate of 387 species for trees with diameter >10cm. It is clear that the diameter cut-off has a major impact on the estimate of the species carrying capacity. A conservative estimate of the total number of tree species in the Pasirmayang region is 632 species! In sampling exercises, the diameter cut-off should not be chosen lightly, and it may be worth adopting field sampling procedures which involve some subsampling of the primary sample area, where the diameter cut-off is set much lower than in the primary plots.

Influence of megasonic agitation on the electrodeposition of high aspect ratio blind vias

This paper presents preliminary studies in electroplating using megasonic agitation to avoid the formation of voids within high aspect ratio microvias that are used for the redistribution of interconnects in high density interconnection technology in printed circuit boards. Through this technique, uniform deposition of metal on the side walls of the vias is possible. High frequency acoustic streaming at megasonic frequencies enables the decrease of the Nernst diffusion layer down to the sub-micron range, allowing thereby conformal electrodeposition in deep grooves. This effect enables the normally convection free liquid near the surface to be agitated. Higher throughput and better control of the material properties of the deposits can be achieved for the manufacturing of embedded interconnections and metal-based MEMS. For optimal filling performance of the microvias, a full design of experiments (DOE) and a multi-physics numerical simulation have been conducted to analyse the influence of megasonic agitation on the plating quality of the microvias. Megasonic based deposition has been found to increase the deposition rate as well as improving the quality of the metal deposits.

Megasonic agitation for enhanced electrodeposition of copper

In this paper we propose an agitation method based on megasonic acoustic streaming to overcome the limitations in plating rate and uniformity of the metal deposits during the electroplating process. Megasonic agitation at a frequency of 1 MHz allows the reduction of the thickness of the Nernst diffusion layer to less than 600 nm. Two applications that demonstrate the benefits of megasonic acoustic streaming are presented: the formation of uniform ultra-fine pitch flip-chip bumps and the metallisation of high aspect ratio microvias. For the latter application, a multi-physics based numerical simulation is implemented to describe the hydrodynamics introduced by the acoustic waves as they travel inside the deep microvias.

Numerical algorithms for modelling electrodeposition: Tracking the deposition front under forced convection from megasonic agitation

Electrodeposition is a widely used technique for the fabrication of high aspect ratio microstructures. In recent years, much research has been focused within this area aiming to understand the physics behind the filling of high aspect ratio vias and trenches on substrates and in particular how they can be made without the formation of voids in the deposited material. This paper reports on the fundamental work towards the advancement of numerical algorithms that can predict the electrodeposition process in micron scaled features. Two different numerical approaches have been developed, which capture the motion of the deposition interface and 2-D simulations are presented for both methods under two deposition regimes: those where surface kinetics is governed by Ohm’s law and the Butler–Volmer equation, respectively. In the last part of this paper the modelling of acoustic forces and their subsequent impact on the deposition profile through convection is examined.

Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance

Solder paste plays an important role in the electronic assembly process by providing electrical, mechanical and thermal bonding between the components and the substrate. The rheological characterisation of pastes is an important step in the design and development of new paste formulations. With the ever increasing trend of miniaturisation of electronic products, the study of the rheological properties of solder pastes is becoming an integral part in the R&D of new paste formulations and in the quality monitoring and control during paste manufacture and electronic assembly process. This research work outlines some of the novel techniques which can be successfully used to investigate the rheology of leadfree solder pastes. The report also presents the results of the correlation of rheological properties with solder paste printing performance. Four different solder paste samples (namely paste P1, P2, P3 and P4) with different flux vehicle systems and particle size distributions were investigated in the study. As expected, all the paste samples showed shear thinning behaviour. Although the samples displayed similar flow behaviour at high shear rates, differences were observed at low shear rates. In the stencil printing trials, round deposits showed better results than rectangular deposits in terms of paste heights and aperture filling. Our results demonstrate a good correlation between higher paste viscosity and good printing performance. The results of the oscillatory and thixotropy tests were also successfully correlated to the printing behaviour of solder paste.

Psyche and the arts: Jungian approaches to music, architecture, literature, painting and film

Does art connect the individual psyche to history and culture? Psyche and the Arts challenges existing ideas about the relationship between Jung and art, and offers exciting new dimensions to key issues such as the role of image in popular culture, and the division of psyche and matter in art form. Divided into three sections - Getting into Art, Challenging the Critical Space and Interpreting Art in the World - the text shows how Jungian ideas can work with the arts to illuminate both psychological theory and aesthetic response. Psyche and the Arts offers new critical visions of literature, film, music, architecture and painting, as something alive in the experience of creators and audiences challenging previous Jungian criticism. This approach demonstrates Jung’s own belief that art is a healing response to collective cultural norms. This diverse yet focused collection from international contributors invites the reader to seek personal and cultural value in the arts, and will be essential reading for Jungian analysts, trainees and those more generally interested in the arts. [From the Publisher]

Twentieth Century Society Spring lecture series: second lives for Twentieth Century masterpieces

The Twentieth Century Society’s Spring lecture series (six in total) looks at the restoration and refurbishment of key C20 buildings in Britain and the US. Buildings covered: BBC Broadcasting House in London (G Val Meyer 1930-32, MacCormac Jamieson Prichard 2000-09). Speaker: Mark Hines (Mark Hines Architects), was the project architect and is the author of The Story of Broadcasting House: Home of the BBC. 5 February 2009. Crown Hall, Chicago (Mies van der Rohe 1952), the Art and Architecture Building, Yale University, New Haven (Paul Rudolf 1961-63) and the former Wills head office in Bristol (SOM with YRM 1970-75). Speaker: Patrick Bellew (Atelier 10 Engineers), 12 February 2009. Center for British Art, Yale University, New Haven (Louis Kahn 1969-77). Speaker: Peter Inskip (Inskip and Jenkins Architects), 17 February 2009. Brunswick Centre London (Patrick Hodgkinson 1967-72; Levitt Bernstein with Patrick Hodgkinson 2006). Speaker: Stuart Tappin (Stand Consulting Engineers Ltd), 26 February 2009. De La Warr Pavilion, Bexhill-on-Sea (Mendelsohn and Chermayeff 1934-5, John McAslan and Partners 2000-05). Speaker: Mark Cannata (HOK Architects), 5 March 2009. Finsbury Health Centre London (Lubetkin & Tecton 1938, first phase of conservation work Avanti Architects 1995.). Speaker: John Allan of Avanti Architects, 12 March 2009.

Key service issues in two UK manufacturing companies from a PSS perspective

This paper illustrates the key service issues within two UK manufacturing companies,which belong to two different industrial domains, and highlights the main points of difference. It draws also on the literature of Product-Service Systems regarding their definition, types, benefits and difficulties in their implementation

D4.2 – Full Design Document

This deliverable outlines the design blueprints for the RAGE application scenario games and forms the rest of the scope for WP4’s tasks. The game designs have been developed in collaboration with application scenario partners in WP5, and informed by WP1, 2 & 3. Additionally peer-feedback has been provided by game developers across WP4. The designs outline the integration of the RAGE assets developed in WP2 and WP3. Each section provides in detail the game play descriptions, game dynamics and mechanics, pedagogies and technical implementation of the RAGE assets into the game applications as described in detailed in WP5’s application documents. The full description of the application objectives and associated learning outcomes has been provided in the project’s MS2 Application Scenario Outlines document.