944 resultados para B-CONTAINING LIPOPROTEINS
Resumo:
International audience
Resumo:
Partial funding for open access provided by the UMD Libraries' Open Access Publishing Fund.
Resumo:
Two feeding trials were carried out to evaluate the effect of diets containing corn or peanut grains naturally contaminated with aflatoxins on the growth, feed intake, survival, and histological response of the white shrimp Litopenaeus vannamei. In trial 1, four experimental diets were formulated to contain 0, 500, 1000, and 2000 g kg–1 of total aflatoxins (TA) and fed to L. vannamei juveniles for 28 days. In trial 2, six experimental diets were formulated to contain 0, 10, 20, 40, 60, and 120 g kg–1 TA and fed to L. vannamei juveniles for 64 days. Feed intake and weight gain were significantly affected by the presence of aflatoxins from naturally contaminated grains. Feed conversion rate increased significantly from a level of inclusion of 60 g kg–1. Survival was significantly reduced only for shrimp fed diets supplemented with 1000 and 2000 g kg–1 TA. Shrimp exposed to higher aflatoxin inclusion levels presented significantly lower lipid vacuole levels in R-cells (12–28%), lower B-cell activity, and lower mitotic E-cell activity. Tubular epithelial atrophy increased from the inclusion level of 20 g kg–1. Hepatopancreatocyte sloughing was significantly higher in shrimp fed diets supplemented with 1000 and 2000 g kg–1 TA. It is worth noting that shrimp fed 40 g kg–1 TA presented a high hepatopancreatocyte sloughing coefficient. Based on these results we conclude that the presence of aflatoxins, even at low levels, reduces feed intake and weight gain, and alters the cells of the hepatopancreas. RESUMEN. Se llevaron a cabo dos bioensayos para evaluar el efecto de granos de maíz y maní contaminados naturalmente con aflatoxinas sobre el crecimiento, consumo de alimento, supervivencia y daños histológicos de juveniles del camarón blanco Litopenaeus vannamei. Para el bioensayo 1, se formularon cuatro dietas con 0, 500, 1000 y 2000 g kg–1 de aflatoxinas totales (AT) y se proporcionaron a juveniles de L. vannamei durante 28 días. Para el bioensayo 2, se formularon seis dietas con 0, 10, 20, 40, 60 y 120 g kg–1 AT y se proporcionaron a juveniles de L. vannamei durante 64 días. El consumo de alimento fue significativamente afectado por la presencia de aflatoxinas. La tasa de conversión alimenticia incrementó significativamente a partir de un nivel de inclusión de 60 g kg–1. La supervivencia fue significativamente reducida solamente en los camarones que fueron alimentados con las dietas suplementadas con 1000 y 2000 g kg–1 AT. Los camarones expuestos a los niveles de inclusión altos presentaron un menor nivel de vacuolas lipídicas en las células R (12–28%), y una menor actividad de las células B y de la actividad mitótica de las células E. La atrofia de los túbulos del epitelio se incrementó a partir de un nivel de inclusión de 20 g kg–1. La descamación de las células del hepatopáncreas fue significativamente mayor en camarones alimentados con las dietas suplementadas con 1000 y 2000 g kg–1 AT, mientras que para las dosis bajas no se observaron diferencias significativas, aunque en camarones alimentados a partir de 40 g kg–1 AT se observa un coeficiente de descamación alto. Con base en los resultados, se concluye que la presencia de aflatoxinas, incluso a niveles bajos, reduce el consumo de alimento y el aumento de peso y altera las células del hepatopáncreas.
Resumo:
BjVIII is a new myotoxic Lys49-PLA2 isolated from Bothrops jararacussu venom that exhibits atypical effects on human platelet aggregation. To better understand the mode of action of BjVIII, crystallographic studies were initiated. Two crystal forms were obtained, both containing two molecules in the asymmetric unit (ASU). Synchrotron radiation diffraction data were collected to 2.0 angstrom resolution and 1.9 angstrom resolution for crystals belonging to the space group P2(1)2(1)2(1) (a = 48.4 angstrom, b = 65.3 angstrom, c = 84.3 angstrom) and space group P3(1)21 (a = b = 55.7 angstrom, c = 127.9 angstrom), respectively. Refinement is currently in progress and the refined structures are expected to shed light on the unusual platelet aggregation activity observed for BjVIII.
Resumo:
A pesquisa objetivou estudar o potencial de utilização da torta de murumuru (Astrocaryum murumuru var. murumuru, M art.) (TM) em dietas de ovinos, em substituição à gramínea Mombaça (Panicum maximum Jacq) com teores crescentes. Realizou-se ensaio metabólico, com 20 ovinos machos, castrados, na Embrapa Amazônia Oriental, Belém, Pará, durante 26 dias. O delineamento foi inteiramente casualizado, em cinco dietas e quatros repetições. TM0: 100% de gramínea; TM10: 10% de TM e 90% de gramínea; TM20: 20% de TM e 80% de gramínea; TM40: 40% de TM e 60% de gramínea e TM60: 60% de TM e 40% de gramínea. Foram avaliados o consumo e o coeciente de digestibilidade aparente da matéria seca (CMS e CDMS), matéria orgânica (CMO e CDMO), proteína bruta (CPB e CDPB), bra em detergente neutro (CFDN e CDFDN), bra em detergente ácido (CFDA e CDFDA), extrato etéreo (CEE e CDEE), celulose (CCEL e CDCEL), hemicelulose (CHEM e CDHEM) e balanço de nitrogênio (BN) das dietas experimentais. O CMS, CMO, CMM, CPB, CFDN e CFDA apresentaram efeito linear decrescente em função dos teores de substituição da gramínea Mombaça por TM na dieta. O CEE e o CLIG apresentaram efeitos quadráticos em função dos teores de substituição da TM na dieta. O CDMS, CDMO e CDHEM tiveram efeitos lineares crescentes, entre TM0 e TM60. O CDEE, CDFDN, CDFDA e CDCEL apresentaram efeito quadrático, com teores de substituição ótimos de 56,65%, 41%, 31,33% e 27,46%, respectivamente. O balanço de nitrogênio apresentou efeito linear negativo no intervalo de inclusão de 0% a 60% de torta. Conclui-se que a torta de murumuru constitui alternativa para a suplementação alimentar de ruminantes, em substituição à gramínea Mombaça, pois proporciona aumento na digestibilidade dos nutrientes por ovinos. Entretanto, deve-se respeitar um limite de inclusão, considerando-se que a partir de 27,46%, 31,33%, 41% e 56,65% de substituição ocorrem decréscimos, respectivamente da CDCEL, CDFDA, CDFDN e CDEE, embora não ocorra valor negativo para o balanço de nitrogênio.
Resumo:
Low density suburban development and excessive use of automobiles are associated with serious urban and environmental problems. These problems include traffic congestion, longer commuting times, high automobile dependency, air and water pollution, and increased depletion of natural resources. Master planned development suggests itself as a possible palliative for the ills of low density and high travel. The following study examines the patterns and dynamics of movement in a selection of master planned estates in Australia. The study develops new approaches for assessing the containment of travel within planned development. Its key aim is to clarify and map the relationships between trip generation and urban form and structure. The initial conceptual framework of the paper is developed in a review of literature related to urban form and travel behaviour. These concepts are tested empirically in a pilot study of suburban travel activity in master planned estates. A geographical information systems methodology is used to determine regional journey-to-work patterns and travel containment rates. Factors that influence selfcontainment patterns are estimated with a regression model. This research is a useful preliminary examination of travel self-containment in Australian master planned estates.
Resumo:
Low density suburban development and excessive use of automobiles are associated with serious urban and environmental problems. These problems include traffic congestion, longer commuting times, high automobile dependency, air and water pollution, and increased depletion of natural resources. Master planned development suggests itself as a possible palliative for the ills of low density and high travel. The following study examines the patterns and dynamics of movement in a selection of master planned estates in Australia. The study develops new approaches for assessing the containment of travel within planned development. Its key aim is to clarify and map the relationships between trip generation and urban form and structure. The initial conceptual framework of the report is developed in a review of literature related to urban form and travel behaviour. These concepts are tested empirically in a pilot study of suburban travel activity in master planned estates. A geographical information systems (GIS) methodology is used to determine regional journey-to-work patterns and travel containment rates. Factors that influence self-containment patterns are estimated with a regression model. The key research findings of the pilot study are: - There is a strong relation between urban structural form and patterns of trip generation; - The travel self-containment of Australian master planned estates is lower than the scholarly literature implies would occur if appropriate planning principles to achieve sustainable urban travel were followed; - Proximity to the central business district, income level and education status are positively correlated with travel containment; - Master planned estates depend more on local and regional centres for employment than on the central business district; - The service sector is the major employer in and around master planned estates. It tends to provide part-time and casual employment rather than full-time employment; - Travel self-containment is negative correlated with car dependency. Master planned estates with less car dependent residents, and with good access to public transport, appear to be more self-contained and, consequently, more sustainable than the norm. This research is a useful preliminary examination of travel self-containment in Australian master planned estates. It by no means exhausts the subject. In future research we hope to further assess sustainable travel patterns with more detailed spatial analysis.
Resumo:
Aim: In the current climate of medical education, there is an ever-increasing demand for and emphasis on simulation as both a teaching and training tool. The objective of our study was to compare the realism and practicality of a number of artificial blood products that could be used for high-fidelity simulation. Method: A literature and internet search was performed and 15 artificial blood products were identified from a variety of sources. One product was excluded due to its potential toxicity risks. Five observers, blinded to the products, performed two assessments on each product using an evaluation tool with 14 predefined criteria including color, consistency, clotting, and staining potential to manikin skin and clothing. Each criterion was rated using a five-point Likert scale. The products were left for 24 hours, both refrigerated and at room temperature, and then reassessed. Statistical analysis was performed to identify the most suitable products, and both inter- and intra-rater variability were examined. Results: Three products scored consistently well with all five assessors, with one product in particular scoring well in almost every criterion. This highest-rated product had a mean rating of 3.6 of 5.0 (95% posterior Interval 3.4-3.7). Inter-rater variability was minor with average ratings varying from 3.0 to 3.4 between the highest and lowest scorer. Intrarater variability was negligible with good agreement between first and second rating as per weighted kappa scores (K = 0.67). Conclusion: The most realistic and practical form of artificial blood identified was a commercial product called KD151 Flowing Blood Syrup. It was found to be not only realistic in appearance but practical in terms of storage and stain removal.
Resumo:
In this paper, a new power sharing control method for a microgrid with several distributed generation units is proposed. The presence of both inertial and noninertial sources with different power ratings, maximum power point tracking, and various types of loads pose a great challenge for the power sharing and system stability. The conventional droop control method is modified to achieve the desired power sharing ensuring system stability in a highly resistive network. A transformation matrix is formed to derive equivalent real and reactive power output of the converter and equivalent feedback gain matrix for the modified droop equation. The proposed control strategy, aimed for the prototype microgrid planned at Queensland University of Technology, is validated through extensive simulation results using PSCAD/EMTDC software.
Resumo:
Isolation of a faulted segment, from either side of a fault, in a radial feeder that has several converter interfaced DGs is a challenging task when current sensing protective devices are employed. The protective device, even if it senses a downstream fault, may not operate if fault current level is low due to the current limiting operation of converters. In this paper, a new inverse type relay is introduced based on line admittance measurement to protect a distribution network, which has several converter interfaced DGs. The basic operation of this relay, its grading and reach settings are explained. Moreover a method is proposed to compensate the fault resistance such that the relay operation under this condition is reliable. Then designed relay performances are evaluated in a radial distribution network. The results are validated through PSCAD/EMTDC simulation and MATLAB calculations.
Resumo:
Australia has no nationally accepted building products life cycle inventory (LCI) database for use in building Ecologically Sustainable Development (ESD) assessment (BEA) tools. More information about the sustainability of the supply chain is limited by industry’s lack of real capacity to deliver objective information on process and product environmental impact. Recognition of these deficits emerged during compilation of a National LCI database to inform LCADesign, a prototype 3 dimensional object oriented computer aided design (3-D CAD) commercial building design tool. Development of this Australian LCI represents 24 staff years of effort here since 1995. Further development of LCADesign extensions is proposed as being essential to support key applications demanded from a more holistic theoretical framework calling for modules of new building and construction industry tools. A proposed tool, conceptually called LCADetails, is to serve the building product industries own needs as well as that of commercial building design amongst other industries’ prospective needs. In this paper, a proposition is examined that the existing national LCI database should be further expanded to serve Australian building product industries’ needs as well as to provide details for its client-base from a web based portal containing a module of practical supply and procurement applications. Along with improved supply chain assessment services, this proposed portal is envisaged to facilitate industry environmental life cycle improvement assessment and support decision-making to provide accredited data for operational reporting capabilities, load-based reasoning as well as BEA applications. This paper provides an overview of developments to date, including a novel 3-D CAD information and communications technology (ICT) platform for more holistic integration of existing tools for true cost assessment. Further conceptualisation of future prospects, based on a new holistic life cycle assessment framework LCADevelop, considering stakeholder relationships and their need for a range of complementary tools leveraging automated function off such ICT platforms to inform dimensionally defined operations for such as automotive, civil, transport and industrial applications are also explored.