Mating frequency of ant queens with alternative dispersal strategies, as revealed by microsatellite analysis of sperm

In social Hymenoptera (ants, bees, and wasps), the number of males that mate with the same queen affects social and genetic organization of the colony. However, the selective forces leading to single mating in certain conditions and multiple mating in others remain enigmatic. In this study, I investigated whether queens of the wood ant Formica paralugubris adopting different dispersal strategies varied in their mating frequency (the number of males with whom they mated). The frequency of multiple mating was determined by using microsatellite markers to genotype the sperm stored in the spermatheca of queens, and the validity of this method was confirmed by analysing mother-offspring combinations obtained from experimental single-queen colonies. Dispersing queens, which may found new colonies, did not mate with more males than queens that stayed within polygynous colonies, where the presence of numerous reproductive individuals ensured a high level of genetic diversity. Hence, this study provides no support to the hypotheses that multiple mating is beneficial because it increases genetic variability within colonies. Most of the F. paralugubris queens mated with a single male, whatever their dispersal strategy and life history. Moreover, multiple mating had little effect on colony genetic structure: the effective mating frequency was 1.11 when calculated from within-brood relatedness, and 1.13 when calculated from the number of mates detected in the sperm. Hence, occasional multiple mating by F. paralugubris queens may have no adaptive significance.

Social and temporal organization in an ant colony

Ant colonies are known for their complex and efficient social organization that com-pletely lacks hierarchical structure. However, due to methodological difficulties in follow¬ing all ants of a colony, it was until now impossible to investigate the social and temporal organization of colonies. We developed a tracking system that allows tracking the posi¬tions and orientations of several hundred individually labeled ants continuously, providing for the first time quantitative long term data on all individuals of a colony. These data permit reconstructing trajectories, activity patterns and social networks of all ants in a colony and enable us to investigate ant behavior quantitatively in previously unpreceded ways. By analyzing the spatial positions and social interactions of all ants in six colonies for 41 days we show that ant colonies are organized in groups of nurses, nest patrollers and foragers. Workers of each group were highly interconnected and occupied similar spa¬tial locations in the nest. Groups strongly segregated spatially, and were characterized by unique behavioral signatures. Nurses spent most of their time on the brood. Nest patrollers frequently visited the rubbish pile, and foragers frequently visited the forag¬ing arena. In addition nurses were on average younger than nest patrollers who were, in turn, younger than foragers. We further show that workers had a preferred behav¬ioral trajectory and moved from nursing to nest patrolling, and from nest patrolling to foraging. By analyzing the activity patterns of all ants we show that only a third of all workers in a colony exhibit circadian rhythms and that these rhythms shortened by on av¬erage 42 minutes in constant darkness, thereby demonstrating the presence of a functional endogenous clock. Most rhythmic workers were foragers suggesting that rhythmicity is tightly associated with task. Nurses and nest patrollers were arrhythmic which most likely reflects plasticity of the circadian clock, as isolated workers in many species exhibit circadian rhythmicity. Altogether our results emphasize that ant colonies, despite their chaotic appearance, repose on a strong underlying social and temporal organization. - Les colonies de fourmis sont connues pour leur organisation sociale complexe et effi-cace, charactérisée par un manque absolu de structure hiérarchique. Cependant, puisqu'il est techniquement très difficile de suivre toutes les fourmis d'une colonie, il a été jusqu'à maintenant impossible d'étudier l'organisation sociale et temporelle des colonies de four-mis. Nous avons développé un système qui permet d'extraire en temps réel à partir d'images vidéo les positions et orientations de plusieurs centaines de fourmis marquées individuellement. Nous avons pu ainsi générer pour la première fois des données quanti-tatives et longitudinales relatives à des fourmis appartenant à une colonie. Ces données nous ont permis de reconstruire la trajectoire et l'activité de chaque fourmi ainsi que ses réseaux sociaux. Ceci nous a permis d'étudier de manière exhaustive et objective le com-portement de tous les individus d'une colonie. En analysant les données spatiales et les interactions sociales de toutes les fourmis de six colonies qui ont été filmées pendant 41 jours, nous montrons que les fourmis d'une même colonie se répartissent en trois groupes: nourrices, patrouilleuses et approvisionneuses. Les fourmis d'un même groupe interagis-sent fréquemment et occupent le même espace à l'intérieur du nid. L'espace propre à un groupe se recoupe très peu avec celui des autres. Chaque groupe est caractérisé par un comportement typique. Les nourrices s'affairent surtout autour du couvain. Les pa-trouilleuses font de fréquents déplacements vers le tas d'ordures, et les approvisionneuses sortent souvent du nid. Les nourrices sont en moyenne plus jeunes que les patrouilleuses qui, à leur tour, sont plus jeunes que les approvisionneuses. De plus, nous montrons que les ouvrières changent de tâche au cours de leur vie, passant de nourrice à patrouilleuse puis à approvisionneuse. En analysant l'activité de chaque fourmi, nous montrons que seulement un tiers des ouvrières d'une colonie présente des rythmes circadiens et que ces rythmes diminuent en moyenne de 42 minutes lorsqu'il y a obscurité constante, ce qui démontre ainsi la présence d'une horloge endogène. De plus, la plupart des approvi¬sionneuses ont une activité rythmique alors que les nourrices et patrouilleuses présentent une activité arythmique, ce qui suggère que la rythmicité est étroitement associée à la tâche. L'arythmie des nourrices et patrouilleuses repose probablement sur une plasticité de l'horloge endogène car des ouvrières de nombreuses espèces font preuve d'une ryth¬micité circadienne lorsqu'elles sont isolées de la colonie. Dans l'ensemble nos résultats révèlent qu'une colonie de fourmis se fonde sur une solide organisation sociale et tem¬porelle malgré son apparence chaotique.

Conditional manipulation of sex ratios by ant workers: A test of kin selection theory

Variable queen mating frequencies provide a unique opportunity to study the resolution of worker-queen conflict over sex ratio in social Hymenoptera, because the conflict is maximal in colonies headed by a singly mated queen and is weak or nonexistent in colonies headed by a multiply mated queen. In the wood ant Formica exsecta, workers in colonies with a singly mated queen, but not those in colonies with a multiply mated queen, altered the sex ratio of queen-laid eggs by eliminating males to preferentially raise queens. By this conditional response to queen mating frequency, workers enhance their inclusive fitness.

Use of nanoparticles in Swiss industry: a targeted survey

A large number of applications using manufactured nanoparticles of less than 100 nm are currently being introduced into industrial processes. There is an urgent need to evaluate the risks of these novel particles to ensure their safe production, handling, use, and disposal. However, today we lack even rudimentary knowledge about type and quantity of industrially used manufactured nanoparticles and the level of exposure in Swiss industry. The goal of this study was to evaluate the use of nanoparticles, the currently implemented safety measures, and the number of potentially exposed workers in all types of industry. To evaluate this, a targeted telephone survey was conducted among health and safety representatives from 197 Swiss companies. The survey showed that nanoparticles are already used in many industrial sectors; not only in companies in the new field of nanotechnology, but also in more traditional sectors, such as paints. Forty-three companies declared to use or produce nanoparticles, and 11 imported and traded with prepackaged goods that contain nanoparticles. The following nanoparticles were found to be used in considerable quantities (> 1000 kg/year per company): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO. The median reported quantity of handled nanoparticles was 100 kg/year. The production of cosmetics, food, paints, powders, and the treatment of surfaces used the largest quantities of these nanoparticles. Generally, the safety measures were found to be higher in powder-based than in liquid-based applications. However, the respondents had many open questions about best practices, which points to the need for rapid development of guidelines and protection strategies

High rate of severe radiation dermatitis during radiation therapy with concurrent cetuximab in head and neck cancer: results of a survey in EORTC institutes.

OBJECTIVE: Examination of the rate of grade III or grade IV radiation dermatitis during treatment of head and neck cancer (HNC) with radiotherapy (RT) and concurrent cetuximab in EORTC centres. MATERIALS AND METHOD: A questionnaire was sent to all members of the EORTC Radiation Oncology Group and Head and Neck Group (111 institutions) to evaluate the widespread use of cetuximab and radiotherapy in HNC and to estimate the frequency of grades III and IV skin reactions in the radiation portals associated with this protocol. Co-morbidities, RT schedules and co-medications were also recorded. RESULTS: We received responses from 28 institutions in 11 countries. A total of 125 HNC patients from 15 institutions were treated with cetuximab and concurrent RT. Information about the skin reactions was available from 71 patients. Of these 36 had no grade III/IV adverse effects in the RT field, 15 had a grade III and 20 had grade IV radiation dermatitis. No detectable relation of grades III and IV radiation dermatitis with co-morbidities such as liver insufficiency or renal dysfunction was found. CONCLUSION: According to the results of the questionnaire, grade III/IV radiation dermatitis is observed in 49% of HNC patients treated with cetuximab and concurrent RT. A systematic clinical monitoring of cutaneous side effects during RT plus cetuximab is advised to ensure the safety of this protocol.

A Comparison of Mobile Scanning to a Total Station Survey at the I-35 and IA 92 Interchange in Warren County, Iowa, August 15, 2012

The purpose of this project was to investigate the potential for collecting and using data from mobile terrestrial laser scanning (MTLS) technology that would reduce the need for traditional survey methods for the development of highway improvement projects at the Iowa Department of Transportation (Iowa DOT). The primary interest in investigating mobile scanning technology is to minimize the exposure of field surveyors to dangerous high volume traffic situations. Issues investigated were cost, timeframe, accuracy, contracting specifications, data capture extents, data extraction capabilities and data storage issues associated with mobile scanning. The project area selected for evaluation was the I-35/IA 92 interchange in Warren County, Iowa. This project covers approximately one mile of I-35, one mile of IA 92, 4 interchange ramps, and bridges within these limits. Delivered LAS and image files for this project totaled almost 31GB. There is nearly a 6-fold increase in the size of the scan data after post-processing. Camera data, when enabled, produced approximately 900MB of imagery data per mile using a 2- camera, 5 megapixel system. A comparison was done between 1823 points on the pavement that were surveyed by Iowa DOT staff using a total station and the same points generated through the MTLS process. The data acquired through the MTLS and data processing met the Iowa DOT specifications for engineering survey. A list of benefits and challenges is included in the detailed report. With the success of this project, it is anticipate[d] that additional projects will be scanned for the Iowa DOT for use in the development of highway improvement projects.

Mass movement characterization using a reflexion and refraction seismic survey with the sloping local base level concept

This study proposes a new concept for upscaling local information on failure surfaces derived from geophysical data, in order to develop the spatial information and quickly estimate the magnitude and intensity of a landslide. A new vision of seismic interpretation on landslides is also demonstrated by taking into account basic geomorphic information with a numeric method based on the Sloping Local Base Level (SLBL). The SLBL is a generalization of the base level defined in geomorphology applied to landslides, and allows the calculation of the potential geometry of the landslide failure surface. This approach was applied to a large scale landslide formed mainly in gypsum and situated in a former glacial valley along the Rhone within the Western European Alps. Previous studies identified the existence of two sliding surfaces that may continue below the level of the valley. In this study. seismic refraction-reflexion surveys were carried out to verify the existence of these failure surfaces. The analysis of the seismic data provides a four-layer model where three velocity layers (<1000 ms(-1), 1500 ms(-1) and 3000 ms(-1)) are interpreted as the mobilized mass at different weathering levels and compaction. The highest velocity layer (>4000 ms(-1)) with a maximum depth of similar to 58 m is interpreted as the stable anhydrite bedrock. Two failure surfaces were interpreted from the seismic surveys: an upper failure and a much deeper one (respectively 25 and 50 m deep). The upper failure surface depth deduced from geophysics is slightly different from the results obtained using the SLBL, and the deeper failure surface depth calculated with the SLBL method is underestimated in comparison with the geophysical interpretations. Optimal results were therefore obtained by including the seismic data in the SLBL calculations according to the geomorphic limits of the landslide (maximal volume of mobilized mass = 7.5 x 10(6) m(3)).

The influence of social structure on brood survival and development in a socially polymorphic ant: insights from a cross-fostering experiment.

Animal societies vary in the number of breeders per group, which affects many socially and ecologically relevant traits. In several social insect species, including our study species Formica selysi, the presence of either one or multiple reproducing females per colony is generally associated with differences in a suite of traits such as the body size of individuals. However, the proximate mechanisms and ontogenetic processes generating such differences between social structures are poorly known. Here, we cross-fostered eggs originating from single-queen (= monogynous) or multiple-queen (= polygynous) colonies into experimental groups of workers from each social structure to investigate whether differences in offspring survival, development time and body size are shaped by the genotype and/or prefoster maternal effects present in the eggs, or by the social origin of the rearing workers. Eggs produced by polygynous queens were more likely to survive to adulthood than eggs from monogynous queens, regardless of the social origin of the rearing workers. However, brood from monogynous queens grew faster than brood from polygynous queens. The social origin of the rearing workers influenced the probability of brood survival, with workers from monogynous colonies rearing more brood to adulthood than workers from polygynous colonies. The social origin of eggs or rearing workers had no significant effect on the head size of the resulting workers in our standardized laboratory conditions. Overall, the social backgrounds of the parents and of the rearing workers appear to shape distinct survival and developmental traits of ant brood.

Using register data to assess the impact of response enhancement methods on the risk of nonresponse bias and survey costs

The pursuit of high response rates to minimise the threat of nonresponse bias continues to dominate decisions about resource allocation in survey research. Yet a growing body of research has begun to question this practice. In this study, we use previously unavailable data from a new sampling frame based on population registers to assess the value of different methods designed to increase response rates on the European Social Survey in Switzerland. Using sampling data provides information about both respondents and nonrespondents, making it possible to examine how changes in response rates resulting from the use of different fieldwork methods relate to changes in the composition and representativeness of the responding sample. We compute an R-indicator to assess representativity with respect to the sampling register variables, and find little improvement in the sample composition as response rates increase. We then examine the impact of response rate increases on the risk of nonresponse bias based on Maximal Absolute Bias (MAB), and coefficients of variation between subgroup response rates, alongside the associated costs of different types of fieldwork effort. The results show that increases in response rate help to reduce MAB, while only small but important improvements to sample representativity are gained by varying the type of effort. These findings lend further support to research that has called into question the value of extensive investment in procedures aimed at reaching response rate targets and the need for more tailored fieldwork strategies aimed both at reducing survey costs and minimising the risk of bias.