973 resultados para Anderson-Carlisle


Relevância:

10.00% 10.00%

Publicador:

Resumo:

以褐藻裙带菜(Undaria pinnatifida)、萱藻(Scytosiphon lomentarius)、海蒿子(Sargassum confusum)、叉开网地藻(Dictyopteris divaricata)、海带(Laminaria japonica)、囊藻(Colpomenia sinuosa)、鼠尾藻(Sargassum thunbergii)、水云(Ectocarpus confervoides)为材料,对其色素-蛋白质复合物的分离技术及其特性进行了系统研究。通过对裙带菜色素-蛋白质复合物分离技术及其影响因素的研究,确立了褐藻的PAGE分离方法。采用Tris-Gly电泳分离系统,以非离子去污剂DMG或DIG为增溶剂(DMG: Chl=20: 1, DIG: Chl=50: 1, 4 ℃增溶1 h),10%的分离胶浓度,丙烯酰胺与甲叉双丙烯酰胺的比例为30: 0.8,从裙带菜中成功地分离出8条含色素的蛋白质复合物带。采用Anderson命名系统,以高等植物菠菜为参照,将其命名为CPIa, CPI, CPa, LHC_1, LHC_2, LHC_3, LHC_4和LHC_5。游离色素较少。通过对三种褐藻的色素-蛋白质复合物的表观分子量测定、光谱学研究以及对裙带菜色素-蛋白质复合物的多肽组成分析,揭示了褐藻各种色素-蛋白质复合物的特征。CPIa是褐藻分子量较大的PSI复合物,为墨角藻黄素-叶绿素 a/c-蛋白质复合物。CPI是褐藻的PSI核心复合物,为P700-叶绿素 a-蛋白质复合物。CPa是褐藻的PSII复合物,为墨角藻黄素-叶绿素 a/c-蛋白质复合物。其余5条为捕光色素-蛋白质复合物,LHC_1和LHC_3是墨角藻黄素-叶绿素 a/c-蛋白质复合物,LHC_2, LHC_4和LHC_5是叶绿素 a/c-蛋白质复合物。根据裙带菜色素-蛋白质复合物的多肽分析结果并与高等植物比较,提出褐藻PSI和PSII的结构模型。褐藻PSI和PSII的反应中心多肽与高等植物相同,捕光复合物明显区别。褐藻LHCI和LHCII的多肽组成相同,都是由单一的20 kDa多肽组成。褐藻叶状体、叶绿体、类囊体膜和PSI复合物的77 K 荧光发射光谱具有特异性,缺少高等植物PSI特征的730 nm 荧光峰。叶状体的77 K 荧光发射光谱按荧光主峰的波长分为两种类型,一种类型的荧光主峰在690 nm,另一种类型的在705-720 nm。三种褐藻PSI复合物的77 K 荧光发射光谱相同,有两个分别们于680 nm和715 nm 的发射峰。褐藻的77 K 荧光特异是由PSI的结构决定的。根据褐藻PSI复合物的荧光特性以及去污剂增溶动力学分析结果,推动F715来自褐藻核心色素-蛋白质复合物,F680来源于PSI复合物中的捕光复合物。褐藻PSI复合物中缺少高等植物发射730 nm 荧光的LHCIb复合物的能量传递模型。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Previous attempts to remove the brown tide organism, Aureococcus anophagefferens, through flocculation with clays have been unsuccessful, in spite of adopting concentrations and dispersal protocols that yielded excellent cell removal efficiency (RE>90%) with other species, so a study was planned to improve cell removal. Four modifications in clay preparation and dispersal were explored: 1) varying the salinity of the clay suspension; 2) mixing of the clay-cell suspension after clay addition; 3) varying of concentration of the initial clay stock; 4) pulsed loading of the clay slurry. The effect of salinity was dependent on the clay mineral type: phosphatic clay (IMC-P2) had a higher RE than kaolinite (H-DP) when seawater was used to disperse the clay, but H-DP removed cells more efficiently when suspended in distilled water prior to application. Mixing after dispersal approximately doubled RE for both clays compared to when the slurry was layered over the culture surface. Lowering the concentration of clay stock and pulsing the clay loading increased RE, regardless of mineral type. However, this increase was more apparent for clays dispersed in seawater than in distilled water. In general, application procedures that decrease the rate of self-aggregation among the clay particles and increase the collision frequency between clay particles and A. anophagefferens achieve higher cell removal efficiency. These empirical studies demonstrated that clays might be an important control option for the brown tide organism, given the proper attention to preparation, dispersal methods, environmental impacts, and the hydrodynamic properties of the system being treated. Implications for the treatment of brown tides in the field are discussed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The proposed plan for enrichment of the Sulu Sea, Philippines, a region of rich marine biodiversity, with thousands of tonnes of urea in order to stimulate algal blooms and sequester carbon is flawed for multiple reasons. Urea is preferentially used as a nitrogen source by some cyanobacteria and dinoflagellates, many of which are neutrally or positively buoyant. Biological pumps to the deep sea are classically leaky, and the inefficient burial of new biomass makes the estimation of a net loss of carbon from the atmosphere questionable at best. The potential for growth of toxic dinoflagellates is also high, as many grow well on urea and some even increase their toxicity when grown on urea. Many toxic dinoflagellates form cysts which can settle to the sediment and germinate in subsequent years, forming new blooms even without further fertilization. If large-scale blooms do occur, it is likely that they will contribute to hypoxia in the bottom waters upon decomposition. Lastly, urea production requires fossil fuel usage, further limiting the potential for net carbon sequestration. The environmental and economic impacts are potentially great and need to be rigorously assessed. (C) 2008 Elsevier Ltd. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present paper reports 22 pandaloid shrimp species from the South China Sea and its adjacent area, including two new records of the South China Sea, 14 new records of the Nanshan Islands, and one new speices. Heterocarpus chani, new species, type localities from the Philippines and Nansha Islands, is distinguished from its allied species, H. gibbosus Bate, 1888, H. tricarinatus Alcock & Anderson, 1894 and H. lepidus De Man, 1917, by the third maxilliped with a short rudimentary exopod.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We begin our studies to make the best of information of seismic data and carry out the description of cracks parameters by extracting anisotropic information. The researching contents are: (1) velocity and polarization anomaly of seismic wave (qP and qSV wave) in weak anisotropic media; (2) reflection seismic synthetic record in anisotropic media; (3) multiple scattering induced by cracks; (4) anisotropic structure inversion and velocity reconstruction with VSP (Vertical Seismic Profile) data; (5) multi-parameters analysis of anisotropy in time-domain and depth-domain. Then we obtain results as follows: (1) We achieve approximate relation of qP and qSV wave's velocity and polarization property in weak anisotropic media. At the same time, we calculate anisotropic velocity factors and polarization anomaly of several typical sedimentary rocks. The results show there are different anisotropic velocity factors and polarization anomaly in different rocks. It is one of the primary theoretical foundation which is expected to identify lithology; (2) We calculate reflection seismic synthetic record with theoretical model; (3) We simulate scattering induced by cracks with Boundary Element Method. Numerical studies show that in the presence of cracks; spatial and scale-length distributions are important and cannot be ignored in modeling cracked solids; (4) From traveltimes information of VSP data, we study the velocity parameter inversion of seismic wave under isotropic and anisotropic models, and its result indicate that the inversion imaging under anisotropic model will not destroy the original features of isotropic model, but it will bring on some bigger error if we adopt the method of isotropic model for anisotropic model data. Further more, basing on the study we develop the CDP mapping technology of reflecting structure under isotropic and anisotropic models, and we process real data as a trial of the methods; (5) We study the problem of initial model reconstruction of anisotropic parameters structure represented by Anderson parameter in depth domain for surface data.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Surface wave propagation in the anisotropic media and S-wave splitting in China mainland are focused in this M.S. dissertation. We firstly introduced Anderson parameters in the research of surface wave propagation in the anisotropic media were deduced, respectively. By applying the given initial model to the forward calculation of Love wave, we compared dispersion curves of Love wave in the anisotropic media with the one in the isotropic media. the results show that, although the two kind of results are similar with each other, the effect of anisotropy can not be neglected. Furthermore, the variation of anisotropy factors will result in the variation of dispersion curves, especially for high-mode one. The method of grid dispersion inversion was then described for further tectonic inversion. We also deduced inversion equation on the condition that the layered media is anisotropic, and calculated the phase-velocity partial derivatives with respect to the model parameters, P- and S-wave velocities, density, anisotropic parameters for Rayleigh wave and Love wave. Having analyzed the results of phase-velocity partial derivatives, we concluded that the derivatives within each period decreased with the depth increasing, the phase-velocity of surface wave is sensitive to the S-wave velocities and anisotropic factors and is not sensitive to the densities of layers. Dispersion data of Love wave from the events occurred during the period from 1991 to 1998 around the Qinghai and Tibet Plateau, which magnitudes are more than 5.5, have been used in the grid dispersion inversion. Those data have been preprocessed and analyzed in the F-T domain. Then the results of 1°*1° grid dispersion inversion, the pure path dispersion data, in the area of Qianghai and Tibet Plateau were obtained. As an example, dispersion data have been input for the tectonic inversion in the anisotropic media, and the results of anisotropic factors under the region of Qianghai and Tibet Plateau were initially discussed. As for the other part of this dissertation. We first introduced the phenomena of S-wave splitting and the methods for calculation the splitting parameters. Then, We applied Butterworth band-pass filter to S-wave data recorded at 8 stations in China mainland, and analyzed S-wave splitting at different frequency bands. The results show the delay time and the fast polarization directions of S-wave splitting depend upon the frequency bands. There is an absence of S-wave splitting at the station of Wulumuqi (WMQ) for the band of 0.1-0.2Hz. With the frequency band broaden, the delay time of S-wave splitting decreases at the stations of Beijing (BJI), Enshi (ENH), Kunming (KMI) and Mudanjiang (MDJ); the fast polarization direction at Enshi (ENH) changes from westward to eastward, and eastward to westward at Hailaer (HIA). The variations of delay time with bands at Lanzhou (LZH) and qiongzhong (QIZ) are similar, and there is a coherent trend of fast polarization directions at BJI, KMI and MDJ respectively. Initial interpretations to the results of frequency band-dependence of S-wave splitting were also presented.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Since the middle of 1980's, the mechanisms of transfer of training between cognitive subskills rest on the same body of declarative knowledge has been highly concerned. The dominant theory is theory of common element (Singley & Anderson, 1989) which predict that there will be little or no transfer between subskills within the same domain when knowledge is used in different ways, even though the subskills might rest on a common body of declarative knowledge. This idea is termed as "principle of use specificity of knowledge" (Anderson, 1987). Although this principle has gained some empirical evidence from different domains such as elementary geometry (Neves & Anderson, 1981) and computer programming (McKendree & Anderson, 1987), it is challenged by some research (Pennington et al., 1991; 1995) in which substantially larger amounts of transfer of training was found between substills that rest on a shared declarative knowledge but share little procedures (production rules). Pennington et al. (1995) provided evidence that this larger amounts of transfer are due to the elaboration of declarative knowledge. Our research provide a test of these two different explanation, by considering transfer between two subskills within the domain of elementary geometry and elementary algebra respectively, and the inference of learning method ("learning from examples" and "learning from declarative-text") and subject ability (high, middle, low) on the amounts of transfer. Within the domain of elementary geometry, the two subskills of generating proofs" (GP) and "explaining proofs" (EP) which are rest on the declarative knowledge of "theorems on the characters of parallelogram" share little procedures. Within the domain of elementary algebra, the two subskills of "calculation" (C) and "simplification" (S) which are rest on the declarative knowledge of "multiplication of radical" share some more procedures. The results demonstrate that: 1. Within the domain of elementary geometry, although little transfer was found between the two subskills of GP and EP within the total subjects, different results occurred when considering the factor of subject's ability. Within the high level subjects, significant positive transfer was found from EP to GP, while little transfer was found on the opposite direction (i. e. from GP to EP). Within the low level subjects, significant positive transfer was found from EP to GP, while significant negative transfer was found on the opposite direction. For the middle level subject, little transfer was found between the two subskills. 2. Within the domain of elementary algebra, significant positive transfer was found from S to C, while significant negative transfer was found on the opposite direction (i. e. from C to S), when considering the total subjects. The same pattern of transfer occurred within the middle level subjects and low level subject. Within the high level subjects, no transfer was found between the two subskills. 3. Within theses two domains, different learning methods yield little influence on transfer of training between subskills. Apparently, these results can not be attributed to either common procedures or elaboration of declarative knowledge. A kind of synthetic inspection is essential to construct a reasonable explanation of these results which should take into account the following three elements: (1) relations between the procedures of subskills; (2) elaboration of declarative knowledge; (3) elaboration of procedural knowledge. 排Excluding the factor of subject, transfer of training between subskills can be predicted and explained by analyzing the relations between the procedures of two subskills. However, when considering some certain subjects, the explanation of transfer of training between subskills must include subjects' elaboration of declarative knowledge and procedural knowledge, especially the influence of the elaboration on performing the other subskill. The fact that different learning methods yield little influence on transfer of training between subskills can be explained by the fact that these two methods did not effect the level of declarative knowledge. Protocol analysis provided evidence to support these hypothesis. From this research, we conclude that in order to expound the mechanisms of transfer of training between cognitive subskills rest on the same body of declarative knowledge, three elements must be considered synthetically which include: (1) relations between the procedures of subskills; (2) elaboration of declarative knowledge; (3) elaboration of procedural knowledge.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este trabalho teve por objetivos avaliar combinações enxerto/porta-enxerto e modalidades de enxertia no sentido de indução de resistência em algumas espécies de meliáceas à broca causada pela Hypsipyla grandella. Foram testadas modalidades de enxertia e combinações intraespecíficas, intra e intergenéricas e interfamílias. A combinação toona/mogno, métodos GFMT e GFCT obtiveram, respectivamente o segundo e o terceiro pegamento médio, diferindo estatisticamente das demais. As combinações mogno/ toona e toona/mogno apresentaram bons resultados de pegamento na enxertia. Entretanto, as plantas definharam e acabaram morrendo, restando vivas as combinações mogno/mogno (testemunha). O melhor pegamento foi obtido na combinação cedro branco/cinamomo, diferindo significativamente das demais. A combinação cedro branco/toona apresentou o segundo melhor pegamento, diferindo significativamente das demais. As combinações MBr/Af ? GFMT, MAf/MBR ? GFMT e MBr/Af ? Borbulhia em T invertido apresentaram o terceiro melhor pegamento. O comportamento das melhores combinações foi avaliado em condições de campo. Os resultados mostraram incompatibilidade enxerto/porta-enxerto na fase de enxertia para todas as combinações testadas, à exceção das combinações mogno/mogno africano, mogno/mogno (testemunha) e cedro branco/cedro australiano. Em condições de campo, a combinação mogno/ mogno africano foi atacada pela H. grandella (apresentou sintomas de danos da broca).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

2009

Relevância:

10.00% 10.00%

Publicador:

Resumo:

2009

Relevância:

10.00% 10.00%

Publicador:

Resumo:

2009

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O Programa de Aceleração do Crescimento do Governo Federal (PAC) é baseado no conceito de investimentos em infraestrutura que, aliados a medidas econômicas, visam estimular os setores produtivos e, ao mesmo tempo, levar benefícios sociais para todas as regiões do Brasil. A Casa Civil e o Gabinete de Segurança Institucional da Presidência da República, a Secretaria de Planejamento e Investimentos Estratégicos (SPI) do Ministério do Planejamento, Orçamento e Gestão, e a Empresa Brasileira de Pesquisa Agropecuária (Embrapa) do Ministério da Agricultura, Pecuária e Abastecimento são parceiros no Projeto 10 do PAC Embrapa (PAC 10) ? ?Monitoramento orbital das obras do PAC e avaliação dos seus impactos?, executado pela equipe da Gestão Territorial Estratégica (GTE) da área técnica da Embrapa Monitoramento por Satélite. Devido à variedade de obras, diversas são as informações necessárias para o seu acompanhamento. Para organizar todas as informações, foi criado um banco de metadados digital.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Buscando o aprimoramento das análises de imagens, maior segurança e contínua disponibilização de imagens de satélite para monitoramento orbital das obras do Programa de Aceleração do Crescimento (PAC) do governo federal, uma nova interface de webmapping foi desenvolvida pelas áreas de Gestão Territorial Estratégica (GTE) e de Tecnologia da Informação (GTI) da Embrapa Monitoramento por Satélite utilizando a linguagem Flex. Essa nova interface é complementar à desenvolvida e apresentada em Carvalho (2009). Flex é uma linguagem de programação baseada em Flash para a criação de aplicações web do tipo Internet Rica (da sigla em inglês RIA ? Rich Internet Application), que têm características e funcionalidades de softwares tradicionais do tipo aplicativo.