A comparison between joint coordinate system and attitude vector for multi-segment foot kinematics.

The joint angles of multi-segment foot models have been primarily described using two mathematical methods: the joint coordinate system and the attitude vector. This study aimed to determine whether the angles obtained through these two descriptors are comparable, and whether these descriptors have similar sensitivity to experimental errors. Six subjects walked eight times on an instrumented walkway while the joint angles among shank, hindfoot, medial forefoot, and lateral forefoot were measured. The angles obtained using both descriptors and their sensitivity to experimental errors were compared. There was no overall significant difference between the ranges of motion obtained using both descriptors. However, median differences of more than 6° were noticed for the medial-lateral forefoot joint. For all joints and rotation planes, both descriptors provided highly similar angle patterns (median correlation coefficient: R>0.90), except for the medial-lateral forefoot angle in the transverse plane (median R=0.77). The joint coordinate system was significantly more sensitive to anatomical landmarks misplacement errors. However, the absolute differences of sensitivity were small relative to the joints ranges of motion. In conclusion, the angles obtained using these two descriptors were not identical, but were similar for at least the shank-hindfoot and hindfoot-medial forefoot joints. Therefore, the angle comparison across descriptors is possible for these two joints. Comparison should be done more carefully for the medial-lateral forefoot joint. Moreover, despite different sensitivities to experimental errors, the effects of the experimental errors on the angles were small for both descriptors suggesting that both descriptors can be considered for multi-segment foot models.

Régulation du processus métastatique tumoral par l'oxyde nitrique (NO), le TGF-β el les cellules de l'hôte

RESUME Nous avons étudié le rôle de deux molécules, le Transfon-ning Growth Factor (TGF-β) et l'oxyde nitrique (NO), dans le processus métastatique. Deux clones tumoraux ont été sélectionnés à partir d'un carcinome du côlon pour leur différence de potentiel tumorigénique dans des rats syngéniques. La croissance tumorale du clone progressif PROb a été corrélée à sa capacité à sécréter le TGF-β actif Cependant, la transfection du clone régressif REGb, sécrétant du TGF-β latent, par une vecteur codant pour le TGF-β bio-actif n'a pas permis d'induire le développement tumoral. Les deux clones tumoraux présentent des activités des protéases MMP-2, APN et DPPIV identiques et qui ne semblent pas modifiées par le TGF-β. L'interaction des cellules tumorales avec l'endothélium et l'activité de la NO synthase (iNOS) responsable de la synthèse de NO sont impliqués dans la progression de nombreux cancers. Le clone PROb, mais pas le clone REGb, inhibe l'activation de la iNOS des cellules endothéliales par sa sécrétion de TGF-β actif Les deux clones montrent cependant des propriétés d'adhésion identiques aux cellules endothéliales et sont capables d'inhiber par contact cellulaire direct l'activation de la iNOS endothéliale. Ceci suggère que ces contacts directs pourraient créer un micro-environnement favorable à la conversion du TGF-β latent en TGF-β actif ou à d'autres interactions moléculaires pouvant réguler l'activation endothéliale. Par ailleurs, les deux clones activent des macrophages du système nerveux central, organe où ils ne forment pas de métastases, mais pas les macrophages circulants, illustrant des mécanismes différentiels et spécifiques dans l'activation de différents types de cellules immunitaires. Afin de mieux comprendre le rôle du NO dans la dissémination métastatique, deux clones cellulaires différant par le taux d'activité de la iNOS ont été sélectionnés à partir de la lignée murine parentale de carcinome du sein EMT-6. Bien que le NO soit un inhibiteur potentiel de la prolifération cellulaire, les deux clones montrent des propriétés prolifératives identiques in vitro. Les cellules EMT-6H qui produisent peu de NO in vitro forment de nombreux nodules tumoraux pulmonaires in vivo corrélés à une mortalité significative des souris syngéniques injectées. Les cellules EMT-6J qui présentent une expression élevée de iNOS et de NO induisent de rares nodules tumoraux pulmonaires et peu de mortalité. Dans ce modèle, l'expression tumorale de NO semble donc défavoriser la croissance tumorale. Les deux clones cellulaires ont des propriétés identiques d'adhésion et de prolifération mesurées in vitro sur des cellules endothéliales primaires isolées de différents organes et in vivo par une colocalisation identique dans les poumons de souris syngéniques 48h après leur injection. Les cellules EMT-6H présentent une activité MMP-2 plus élevée alors que les activités des protéases APN et DPPIV sont identiques dans les deux clones cellulaires. Le TGF-β soluble ainsi que les fibroblastes primaires bloquent la prolifération des deux clones cellulaires. Cependant, l'activation préalable des fibroblastes par du TGF-β restaure partiellement la prolifération du clone EMT-6H mais pas celle du clone EMT-6J. Ces résultats montrent que le rôle de molécules telles que le TGF-β et le NO tumoral dans la progression tumorale doit être considéré dans un contexte d'interactions des cellules tumorales avec les différentes types cellulaires de l'hôte: en particulier, notre travail souligne que les macrophages et les fibroblastes sont déterminants dans la progression métastatique des carcinomes du côlon ou du sein. RESUME DESTINE A UN LARGE PUBLIC Les métastases tumorales, disséminées et intraitables par chirurgie, représentent un problème majeur dans le traitement clinique du cancer. Elles sont dues à des cellules tumorales qui ont migré de leur site tumoral primaire, circulé et survécu dans le système vasculaire de l'hôte, échappé au système immunitaire, adhéré à et survécu sur l'endothélium des vaisseaux, et envahi le tissu sous-jacent où elles ont proliféré. Cette capacité à former des métastases implique de nombreux facteurs dont certains ont été identifiés mais dont le rôle reste controversé dans les différentes études. Nous nous sommes intéressés au rôle de l'oxyde nitrique (NO) et du facteur de croissance et de transformation cellulaire TGF-β. Dans les carcinomes du sein, l'expression des enzymes responsables de la synthèse de NO a été corrélée avec l'invasion tumorale mais aussi avec un pronostic favorable selon les études. Deux clones cellulaires ont été isolés à partir de la tumeur mammaire EMT-6 chez la souris. Le clone EMT-6H sécrète peu de NO et forme de nombreuses tumeurs dans les poumons des souris *entraînant leur décès. Le clone EMT-6J sécrète beaucoup de NO et ne se développe que peu dans les poumons. Dans ce modèle expérimental, le NO semble donc défavoriser la croissance tumorale. L'analyse des interactions avec les cellules de l'hôte rencontrées lors de la formation de métastases pulmonaires a montré que les deux clones cellulaires adhérent et prolifèrent de manière similaire sur les cellules endothéliales tapissant l'intérieur des vaisseaux sanguins. L'arrêt des cellules tumorales dans les poumons ne permet donc pas d'expliquer la différence de croissance tumorale. Cependant, le clone agressif EMT-6H présente une activité élevée d'une protéase (MMP-2) qui lui permettrait par la suite d'envahir le tissu pulmonaire. Par ailleurs, l'activation des fibroblastes du tissu pulmonaire par le TGF-β, une molécule observée dans des conditions inflammatoires, permet au clone agressif EMT-6H de proliférer mais inhibe la croissance du clone EMT-6J. Dans un modèle expérimental de carcinome du côlon, le TGF-β est considéré favorable à la croissance tumorale. Isolées à partir de la même tumeur initiale, deux lignées de cellules ont des comportements opposés lorsqu'elles sont injectées sous la peau des rats. La capacité de la lignée PROb à former des tumeurs a été corrélée à la sécrétion de TGF-β actif L'introduction du gène codant pour le TGF-β actif dans la lignée REGb, qui ne sécrète pas de TGF-β actif et ne forme pas de tumeurs chez le rat, ne restaure pas leur potentiel tumorigénique. Dans ce modèle, l'expression de TGF-β actif ne semble donc pas suffisante à la croissance tumorale. Les interactions avec différents types cellulaires de l'hôte ont été étudiées. Les deux lignées tumorales adhérent de manière similaire sur les cellules endothéliales et sont capables d'inhiber leur activation, un mécanisme qui pourrait participer à la destruction. Les deux lignées activent les cellules immunitaires du système nerveux central, un organe où elles ne forment pas de métastase. Ces résultats suggèrent que la sélection des cellules métastatiques ne s'effectue pas sur l'endothélium des vaisseaux sanguins mais à des étapes ultérieures dans le micro- environnement cellulaire du nouvel organe colonisé. SUMMARY Metastasis results from the migration of tumor cells from their primary tumor, circulation through the bloodstream, attachment to the endothelium, and invasion of the surrounding tissue where they create a microenvironnement favoring their growth. This multistep process implies various cellular interactions and molecules. Among those, we were interested in the role of the Transforming Growth Factor beta (TGF-β) and the nitric oxide (NO). Two cell lines were isolated from a rat colon tumor and assessed for their metastatic potential in vivo. The PROb cell line that expresses active TGF-β formed subcutaneous tumors in rats while the REGb cell line that expresses only latent TGF-β did not. Transfection of REGb cells with a plasmid encoding for the active form of TGF-β failed to restore their metastatic ability. Thus TGF-β secretion is not sufficient to induce colon carcinoma progression. Activities of various proteases such as APN, DPPIV and MMP were similar in both cell lines and were not regulated by TGF-β. Interactions with the endothelium as well as NO synthase activity (iNOS) and local NO concentrations are believed to be crucial steps in cancer metastasis. Coculture of the two clones with endothelial cells inhibited the cytokine-triggered activation of the iNOS enzyme in primary rat endothelial cells but only PROb cells were capable of increasing the expression of IL-6, a protumoral interleukin that may participate in the impairment of the anti-tumoral immune response of the host. Both cell lines exhibited potential to activate microglial cells but not bone marrow-derived macrophages, pointing to a differential regulation of specialized immune cells. To better understand the conflicting role of NO in breast cancer progression, two cell clones were selected from the murine tumorigenic cell line EMT-6 based on their iNOS activity and NO secretion. Although NO has been shown to inhibit cell proliferation, the two cell clones exhibited similar proliferation rates in vitro. The EMT-6H cells expressed little NO and grew actively in the lungs of syngenic mice, leading to their death. Opposite results were observed with the EMT-6J cells. In these in vivo conditions, NO seems to impair tumor growth. Both clones exhibited similar in vitro adhesive properties to primary endothelial cells isolated from various mouse organs and similar localization in the lungs of mice 48 hours after injection. Sustained metalloproteinase MMP-2 activity was detected in the tumorigenic EMT-6H clone, but not in the EMT-6J cells while other proteases such as APN and DPPIV showed no difference. These results suggested that the two clones differed in invasion steps following adhesion to the endothelium and that NO did not participate in previous steps. Consistent with this, both soluble TGF-β and supernatants of cultures of mouse primary lung fibroblasts inhibited the growth of the two clones. However, previous activation of these fibroblasts with TGF-β restored the growth of the tumorigenic EMT-6H cells, but not of EMT-6J cells. Altogether, these results indicate that the role of a given molecule, such as NO or TGF-β, must be considered in a context of interaction of tumor cells with host cells. They further imply that interaction of tumor cells with specialized immune cells and with stromal cells of the colonized organ, rather than with the endothelium, are critical in regulating metastasis.

Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition. ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.

Field Evaluation of Elliptical Fiber Reinforced Polymer Dowel Performance, June 2005

Fiber reinforced polymer (FRP) composite materials are making an entry into the construction market in both buildings and pavements. The application to pavements so far has come in the form of joint reinforcement (dowels and tie bars). FRP resistance to salt corrosion in dowels has made it an alternative to standard epoxy-coated steel dowels for pavements. Iowa State University has completed a large amount of laboratory research to determine the diameter, spacing, and durability of FRP dowels. This report documents the performance of elliptical FRP dowels installed in a field situation. Ten joints were monitored in three consecutive test sections, for each of three dowel spacings (10, 12, and 15 inches) including one instrumented dowel in each test section. The modulus of dowel bar support was determined using falling weight deflectometer (FWD) testing and a loaded crawl truck. FWD testing was also used to determine load transfer efficiency across the joint. The long-term performance and durability of the concrete was also evaluated by monitoring faulting and joint opening measurements and performing visual distress surveys at each joint. This report also contains similar information for standard round, medium elliptical, and heavy elliptical steel dowels in a portion of the same highway. In addition, this report provides a summary of theoretical analysis used to evaluate joint differential deflection for the dowels.

Measuring Pavement Profile at the Slip-Form Paver, May 2005

Pavement profile or smoothness has been identified nationally as a good measure of highway user satisfaction. This has led highway engineers to measure profiles of both operating and new highways. Operational highway profiles are often measured with high-speed inertial profilers. New highway profiles are usually measured with profilographs in order to establish incentives or disincentives for pavement construction. In most cases, these two processes do not measure the same value from the “cradle to grave” life of pavements. In an attempt to correct the inconsistency between measuring techniques, lightweight profilers intended to produce values to be used for construction acceptance are being made that measure the same profile as high-speed inertial profilers. Currently, two profiler systems have been identified that can measure pavement profile during construction. This research has produced a field evaluation of the two systems. The profilers evaluated in this study are able to detect roughness in the final profile, including localized roughness and roughness at joints. Dowel basket ripple is a significant source of pavement surface roughness. The profilers evaluated in this study are able to detect dowel basket ripple with enough clarity to warn the paving crew. String-line disturbances degrade smoothness. The profilers evaluated in this study are able to detect some string-line disturbances during paving operations. The profilers evaluated in this study are not currently able to produce the same absolute International Roughness Index (IRI) values on the plastic concrete that can be measured by inertial profilers on the hardened concrete. Construction application guidelines are provided.

Concrete Paving Notes Construction No.1, 2005

This booklet will help developers, consultants, and engineers planning concrete pavement construction projects, superintendents and supervisors who want a basic training aid and reference, and crew members new to the concrete paving industry. It provides a general description of current concrete pavement construction practices, from establishing preconstruction control mechanisms to sealing joints. It also provides a quick troubleshooting reference.

Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition (1). ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.

Field Evaluation of Elliptical Fiber Reinforced Polymer Dowel Performance, June 2003

Fiber composite materials (FRP) are making an entry into the construction market in both buildings and pavements. The application to pavements comes in the form of joint reinforcement (dowels and tie bars) to date. FRP resistance to salt corrosion in dowels has made it an alternative to standard epoxy coated dowels for pavements. Iowa State University has completed a large amount of laboratory research into the determination of diameter, spacing, and durability of FRP dowels. This report documents the installation of a series of FRP elliptical-shaped dowel joints (including instrumented units) in a field situation and the beginning of a two-year study to compare laboratory results to in-service pavements. Ten joints were constructed for each of three dowel spacings of 10, 12, and 15 inches ( 254, 305, and 381 mm) with one instrumented joint in each test section. The instrumented bars will be load tested with a loaded truck and FWD testing.

Extra-articular knee resection for a secondary chondrosarcoma evolving from an isolated enchondroma of the distal femur: A case report.

Introduction: Enchondromas are among the most current benign bone tumours. Malignant degeneration is extremely rare (<1%) and generally presents as a low grade chondrosarcoma. For localized grade 1 lesions, the treatment of choice is curettage. Wide excision and reconstruction is generally not necessary, unless locally advanced or more aggressive behaviour is suspected at presentation. Case report: A healthy 72 yo male presented with pain and recurrent knee joint effusion. X-rays show a classical central distal metaphyseal enchondroma of the femur associated with subtle osteolysis of the lateral condyle. MRI confirms the presence of a locally aggressive chondromatous lesion based in a classical enchondroma. Core needle biopsy revealed a grade 1 chondrosarcoma, which was in contrast to the radiological aggressiveness of the lesion. Total body CT-scan did not reveal metastatic disease. A wide resection was planned, as a high-grade lesion and joint contamination was suspected. We performed an extra-articular knee resection and reconstruction with a hinged modular total knee megaprosthesis. The definitive histology was grade 1 chondrosarcoma, the surgical margins were wide. The evolution was favourable and the patient was able to perform all his activities of daily living independently without pain at 6 weeks postop. Knee flexion reached 90°. The oncologic screening at 18 months did not show local or distant recurrence. Conclusion: Joints near a benign tumour that suddenly become symptomatic or present an effusion might indicate a malignant transformation. Wide resection and prosthetic reconstruction remains an effective treatment option even in low grade cartilaginous lesions if (1) the adjacent joint is contaminated, or (2) joint-sparing surgery would result in a severe functional impairment of the limb.

Outcome after surgical treatment of symptomatic delayed unions and nonunions of midshaft clavicle fractures

Introduction: Nonoperative treatment of displaced midshaft clavicle fractures is associated with higher nonunion rate than previously reported. Moreover, its occurrence can compromise shoulder function. The aim of this study was to evaluate the outcome of surgical treatment of symptomatic clavicle midshaft delayed and nonunion. Methods: Between 1999 and 2008, 19 clavicle delayed unions and nonunions were treated by open reduction and reconstructive plate fixation with augmentation by autologous bone graft. Iliac bone graft was used in 15 atrophic cases, and graft from the callus was used in 4 hypertrophic nonunions. There were 14 men and 5 women, with an average age of 41 years (range, 19 to 59 years) at time of surgery. No patient had undergone a previous surgery and all complained of shoulder pain. Delayed unions and nonunions were defined as non-healing after 3 and 6 months respectively. The mean time to surgery was 8 months (range, 4 to 23 months). All patients were pre and postoperatively clinically evaluated and imaged with standard radiographs until complete healing. Results: After a mean time of 3 months (range, 2 to 7 months) all fractures were completely healed. All patients reported full range of motion at time of last follow-up. Nine patients (47%) reported slight shoulder pain but all returned to their previous professional activities after a mean time of 3 months (range, 1 to 8 months). We reported 12 (63%) minor complications. There were 6 (32%) plate-related discomforts which resolved after hardware removal, two (11%) scar numbness, two (11%) adhesive capsulitis with spontaneous complete recovery, and two (11%) AC-joint pain treated successfully with local corticosteroids injection. Conclusion: Surgical treatment of delayed unions and nonunions of midshaft clavicle fractures yields satisfactory results and a high union rate. However, 50% of the patients may still complain of slight residual shoulder pain.

Recessive multiple epiphyseal dysplasia (rMED) with homozygosity for C653S mutation in the DTDST gene - phenotype, molecular diagnosis and surgical treatment of habitual dislocation of multilayered patella: case report.

BACKGROUND: Multiple epiphyseal dysplasia (MED) is one of the more common generalised skeletal dysplasias. Due to its clinical heterogeneity diagnosis may be difficult. Mutations of at least six separate genes can cause MED. Joint deformities, joint pain and gait disorders are common symptoms. CASE PRESENTATION: We report on a 27-year-old male patient suffering from clinical symptoms of autosomal recessive MED with habitual dislocation of a multilayered patella on both sides, on the surgical treatment and on short-term clinical outcome. Clinical findings were: bilateral hip and knee pain, instability of femorotibial and patellofemoral joints with habitual patella dislocation on both sides, contractures of hip, elbow and second metacarpophalangeal joints. Main radiographic findings were: bilateral dislocated multilayered patella, dysplastic medial tibial plateaus, deformity of both femoral heads and osteoarthritis of the hip joints, and deformity of both radial heads. In the molecular genetic analysis, the DTDST mutation g.1984T > A (p.C653S) was found at the homozygote state. Carrier status was confirmed in the DNA of the patient's parents. The mutation could be considered to be the reason for the patient's disease. Surgical treatment of habitual patella dislocation with medialisation of the tibial tuberosity led to an excellent clinical outcome. CONCLUSIONS: The knowledge of different phenotypes of skeletal dysplasias helps to select genes for genetic analysis. Compared to other DTDST mutations, this is a rather mild phenotype. Molecular diagnosis is important for genetic counselling and for an accurate prognosis. Even in case of a multilayered patella in MED, habitual patella dislocation could be managed successfully by medialisation of the tibial tuberosity.

Evalution of Hot Mix Asphalt Moisture Sensitivity Using the Nottingham Asphalt Test Equipment, July 2005

Moisture sensitivity of Hot Mix Asphalt (HMA) mixtures, generally called stripping, is a major form of distress in asphalt concrete pavement. It is characterized by the loss of adhesive bond between the asphalt binder and the aggregate (a failure of the bonding of the binder to the aggregate) or by a softening of the cohesive bonds within the asphalt binder (a failure within the binder itself), both of which are due to the action of loading under traffic in the presence of moisture. The evaluation of HMA moisture sensitivity has been divided into two categories: visual inspection test and mechanical test. However, most of them have been developed in pre-Superpave mix design. This research was undertaken to develop a protocol for evaluating the moisture sensitivity potential of HMA mixtures using the Nottingham Asphalt Tester (NAT). The mechanisms of HMA moisture sensitivity were reviewed and the test protocols using the NAT were developed. Different types of blends as moisture-sensitive groups and non-moisture-sensitive groups were used to evaluate the potential of the proposed test. The test results were analyzed with three parameters based on performance character: the retained flow number depending on critical permanent deformation failure (RFNP), the retained flow number depending on cohesion failure (RFNC), and energy ratio (ER). Analysis based on energy ratio of elastic strain (EREE ) at flow number of cohesion failure (FNC) has higher potential to evaluate the HMA moisture sensitivity than other parameters. If the measurement error in data-acquisition process is removed, analyses based on RFNP and RFNC would also have high potential to evaluate the HMA moisture sensitivity. The vacuum pressure saturation used in AASHTO T 283 and proposed test has a risk to damage specimen before the load applying.

Evaluation of Transverse Joint Forming Methods for PCC Pavement, January 2006

The members of the Iowa Concrete Paving Association, the National Concrete Pavement Technology Center Research Committee, and the Iowa Highway Research Board commissioned a study to examine alternative ways of developing transverse joints in portland cement concrete pavements. The present study investigated six separate variations of vertical metal strips placed above and below the dowels in conventional baskets. In addition, the study investigated existing patented assemblies and a new assembly developed in Spain and used in Australia. The metal assemblies were placed in a new pavement and allowed to stay in place for 30 days before the Iowa Department of Transportation staff terminated the test by directing the contractor to saw and seal the joints. This report describes the design, construction, testing, and conclusions of the project.

The value of serum procalcitonin level for differentiation of infectious from noninfectious causes of fever after orthopaedic surgery.

BACKGROUND: Early diagnosis of postoperative orthopaedic infections is important in order to rapidly initiate adequate antimicrobial therapy. There are currently no reliable diagnostic markers to differentiate infectious from noninfectious causes of postoperative fever. We investigated the value of the serum procalcitonin level in febrile patients after orthopaedic surgery. METHODS: We prospectively evaluated 103 consecutive patients with new onset of fever within ten days after orthopaedic surgery. Fever episodes were classified by two independent investigators who were blinded to procalcitonin results as infectious or noninfectious origin. White blood-cell count, C-reactive protein level, and procalcitonin level were assessed on days 0, 1, and 3 of the postoperative fever. RESULTS: Infection was diagnosed in forty-five (44%) of 103 patients and involved the respiratory tract (eighteen patients), urinary tract (eighteen), joints (four), surgical site (two), bloodstream (two), and soft tissues (one). Unlike C-reactive protein levels and white blood-cell counts, procalcitonin values were significantly higher in patients with infection compared with patients without infection on the day of fever onset (p = 0.04), day 1 (p = 0.07), and day 3 (p = 0.003). Receiver-operating characteristics demonstrated that procalcitonin had the highest diagnostic accuracy, with a value of 0.62, 0.62, and 0.71 on days 0, 1, and 3, respectively. In a multivariate logistic regression analysis, procalcitonin was a significant predictor for postoperative infection on days 0, 1, and 3 of fever with an odds ratio of 2.3 (95% confidence interval, 1.1 to 4.4), 2.3 (95% confidence interval, 1.1 to 5.2), and 3.3 (95% confidence interval, 1.2 to 9.0), respectively. CONCLUSIONS: Serum procalcitonin is a helpful diagnostic marker supporting clinical and microbiological findings for more reliable differentiation of infectious from noninfectious causes of fever after orthopaedic surgery.

Determination of bacterial quantity by sonication in vacum-assisted closure (VAC) foams used for treatment of chronic wounds

Background: Negative pressure wound treatment is increasingly used through a Vacuum-Assisted Closure (VAC) device in complex wound situations. For this purpose, sterile polyurethane (PU) and polyvinyl alcohol (PVA) foam dressings are fitted to the wound size and covered with an adhesive drape to create an airtight seal. Little information exists about the type and quantity of microorganisms within the foams. Therefore, we investigated VAC foams after removal from the wound using a validated method (sonication) to detect the bacterial bioburden in the foam consisting as microbial biofilms.Methods: We prospectively included VAC foams (PU and PVA, KCI, Rümlamg, Switzerland) without antibacterial additions (e.g. silver), which were removed from wounds in patients with chronic ulcers from January 2007 through December 2008. Excluded were patients with acute wound infection, necrotizing fasciitis, underlying osteomyelitis or implant. Removed foams from regular changes of dressing were aseptically placed in a container with 100 ml sterile Ringer's solution. Within 4 hours after removal, foams were sonicated for 5 min at 40 kHz (as described in NEJM 2007;357:654). The resulting sonication fluid was cultured at 37°C on aerobic blood agar plates for 5 days. Microbes were quantified as No. of colony-forming units (CFU)/ml sonication fluid and identified to the species level.Results: A total of 68 foams (38 PU and 30 PVA) from 55 patients were included in the study (median age 71 years; range 33-88 years, 57% were man). Foams were removed from the following anatomic sites: sacrum (n=29), ischium (n=18), heel (n=13), calves (n=6) and ankle (n=2). The median duration of being in place was 3 days (range, 1-8 days). In all 68 foams, bacteria were found in large quantities (median 105 CFU/ml, range 102-7 CFU/ml sonication fluid. No differences were found between PU and PVA foams. One type of organisms was found in 11 (16%), two in 17 (24%) and 3 or more in 40 (60%) foams. Gram-negative rods (Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae, Acinetobacter baumanii, Pseudomonas aeruginosa) were isolated in 70%, followed by Staphylococcus aureus (20%), koagulase-negative staphylococci, streptococci (8%), and enterococci (2%).Conclusion: With sonication, a high density of bacteria present in VAC foams was demonstrated after a median of 3 days. Future studies are needed to investigate whether antimicrobial-impregnated foams can reduce the bacterial load in foams and potentially improve wound healing.