Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill

Drilling of carbon fibre/epoxy laminates is usually carried out using standard drills. However, it is necessary to adapt the processes and/or tooling as the risk of delamination, or other damages, is high. These problems can affect mechanical properties of produced parts, therefore, lower reliability. In this paper, four different drills – three commercial and a special step (prototype) – are compared in terms of thrust force during drilling and delamination. In order to evaluate damage, enhanced radiography is applied. The resulting images were then computational processed using a previously developed image processing and analysis platform. Results show that the prototype drill had encouraging results in terms of maximum thrust force and delamination reduction. Furthermore, it is possible to state that a correct choice of drill geometry, particularly the use of a pilot hole, a conservative cutting speed – 53 m/min – and a low feed rate – 0.025 mm/rev – can help to prevent delamination.

Designing market-based instruments for biodiversity conservation: learning with the Australian experience and evaluating Portugal's potential

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente, perfil Gestão de Sistemas Ambientais

Soil sampling design and sampling techniques for soil properties monitoring – common difficulties related to forest soils

Mathematical models and statistical analysis are key instruments in soil science scientific research as they can describe and/or predict the current state of a soil system. These tools allow us to explore the behavior of soil related processes and properties as well as to generate new hypotheses for future experimentation. A good model and analysis of soil properties variations, that permit us to extract suitable conclusions and estimating spatially correlated variables at unsampled locations, is clearly dependent on the amount and quality of data and of the robustness techniques and estimators. On the other hand, the quality of data is obviously dependent from a competent data collection procedure and from a capable laboratory analytical work. Following the standard soil sampling protocols available, soil samples should be collected according to key points such as a convenient spatial scale, landscape homogeneity (or non-homogeneity), land color, soil texture, land slope, land solar exposition. Obtaining good quality data from forest soils is predictably expensive as it is labor intensive and demands many manpower and equipment both in field work and in laboratory analysis. Also, the sampling collection scheme that should be used on a data collection procedure in forest field is not simple to design as the sampling strategies chosen are strongly dependent on soil taxonomy. In fact, a sampling grid will not be able to be followed if rocks at the predicted collecting depth are found, or no soil at all is found, or large trees bar the soil collection. Considering this, a proficient design of a soil data sampling campaign in forest field is not always a simple process and sometimes represents a truly huge challenge. In this work, we present some difficulties that have occurred during two experiments on forest soil that were conducted in order to study the spatial variation of some soil physical-chemical properties. Two different sampling protocols were considered for monitoring two types of forest soils located in NW Portugal: umbric regosol and lithosol. Two different equipments for sampling collection were also used: a manual auger and a shovel. Both scenarios were analyzed and the results achieved have allowed us to consider that monitoring forest soil in order to do some mathematical and statistical investigations needs a sampling procedure to data collection compatible to established protocols but a pre-defined grid assumption often fail when the variability of the soil property is not uniform in space. In this case, sampling grid should be conveniently adapted from one part of the landscape to another and this fact should be taken into consideration of a mathematical procedure.

Práticas organizacionais formais utilizadas para a aprendizagem com acidentes de trabalho

O SHO 2010, Colóquio Internacional de Segurança e Higiene Ocupaciona

Zonal distribution of gold and platinium group elements in the Mondunguara deposits Mozambique

The Mondunguara copper mines are situated in mountainous terrain in west-central Mozambique. The mineralization consists of chalcopyrite, pyrrhotite, common pcntlandite, cobaltpentlandite, pyrite and several minor oxides and sulphides in tabular ore bodies deeping steep to the north. Gold was known to occur in small quantities but no systematic sampling and analysis for precious clements was ever done. Mineralogical and geological evidence has shown that the ores are magmatic in origin and were derived from gabbro-peridotitic magma dykes saturated in sulphides when intruded. The ore bodies show a clear zonation. Platinum group elements as well as pure gold are associated with high temperature hexagonal pyrrhotite. This pyrrhotite being of no use is generally discarded to the tailing dumps. Late hydrothermal phases are enriched in native silver, silver tellurides as well as electrum.

Hyperspectral unmixing algorithm via dependent component analysis

This paper introduces a new method to blindly unmix hyperspectral data, termed dependent component analysis (DECA). This method decomposes a hyperspectral images into a collection of reflectance (or radiance) spectra of the materials present in the scene (endmember signatures) and the corresponding abundance fractions at each pixel. DECA assumes that each pixel is a linear mixture of the endmembers signatures weighted by the correspondent abundance fractions. These abudances are modeled as mixtures of Dirichlet densities, thus enforcing the constraints on abundance fractions imposed by the acquisition process, namely non-negativity and constant sum. The mixing matrix is inferred by a generalized expectation-maximization (GEM) type algorithm. This method overcomes the limitations of unmixing methods based on Independent Component Analysis (ICA) and on geometrical based approaches. The effectiveness of the proposed method is illustrated using simulated data based on U.S.G.S. laboratory spectra and real hyperspectral data collected by the AVIRIS sensor over Cuprite, Nevada.

A calculus for modeling and analyzing conversations in service-oriented computing

Dissertação apresentada para a obtenção do Grau de Doutor em Informática pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Development of new methodologies in sample treatment for proteomics workflow based on enzymatic probe sonication technology and mass spectrometry

Thesis submitted to the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia, for the degree of Doctor of Philosophy in Biochemistry

Exploring why portuguese companies expatriate, and portuguese expatriates accept international assignments

This study explores (1) the reasons that lead Portuguese companies to use expatriates and (2) the motivations that led the repatriates to accepting an international assignment. Semistructured interviews were carried out on 44 individuals (14 responsible for organizational management of the expatriates and 30 repatriates), in seven international companies based in Portugal, and analysis of the thematic content was conducted for data processing. Results suggest that the reasons that lead Portuguese companies to expatriating employees are connected to business needs and the control of international operations, while individual motivations are linked to personal and professional ambition, the will to serve the company and organizational pressure. We concluded that Portuguese companies, like most European companies, seem to develop a strategy of International Human Resources Management (IHRM) according to an ethnocentric approach, characteristic to companies in early stages of internationalization. Similarly, the main motivations of Portuguese repatriates are identical to those of other expatriates, though the will to serve the company seems to be more valued by Portuguese repatriates than by expatriates from other countries.

Natural antioxidants extraction and their incorporation into model pharmaceutical systems

Dissertation to obtain a Master Degree in Biotechnology

Comparison of different methods for work accidents investigation in hospitals: A Portuguese case study

BACKGROUND: The hospital environment has many occupational health risks that predispose healthcare workers to various kinds of work accidents. OBJECTIVE: This study aims to compare different methods for work accidents investigation and to verify their suitability in hospital environment. METHODS: For this purpose, we selected three types of accidents that were related with needle stick, worker fall and inadequate effort/movement during the mobilization of patients. A total of thirty accidents were analysed with six different work accidents investigation methods. RESULTS: The results showed that organizational factors were the group of causes which had the greatest impact in the three types of work accidents. CONCLUSIONS: The methods selected to be compared in this paper are applicable and appropriate for the work accidents investigation in hospitals. However, the Registration, Research and Analysis of Work Accidents method (RIAAT) showed to be an optimal technique to use in this context.

The materials, technique, conservation treatment and after-care of interior de um convento

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Conservação e Restauro, especialização em pintura sobre tela

XATA 2010 : XML : Associated Technologies and Applications, 8th

These are the proceedings for the eighth national conference on XML, its Associated Technologies and its Applications (XATA'2010). The paper selection resulted in 33% of papers accepted as full papers, and 33% of papers accepted as short papers. While these two types of papers were distinguish during the conference, and they had different talk duration, they all had the same limit of 12 pages. We are happy that the selected papers focus both aspects of the conference: XML technologies, and XML applications. In the first group we can include the articles on parsing and transformation technologies, like “Processing XML: a rewriting system approach", “Visual Programming of XSLT from examples", “A Refactoring Model for XML Documents", “A Performance based Approach for Processing Large XML Files in Multicore Machines", “XML to paper publishing with manual intervention" and “Parsing XML Documents in Java using Annotations". XML-core related papers are also available, focusing XML tools testing on “Test::XML::Generator: Generating XML for Unit Testing" and “XML Archive for Testing: a benchmark for GuessXQ". XML as the base for application development is also present, being discussed on different areas, like “Web Service for Interactive Products and Orders Configuration", “XML Description for Automata Manipulations", “Integration of repositories in Moodle", “XML, Annotations and Database: a Comparative Study of Metadata Definition Strategies for Frameworks", “CardioML: Integrating Personal Cardiac Information for Ubiquous Diagnosis and Analysis", “A Semantic Representation of Users Emotions when Watching Videos" and “Integrating SVG and SMIL in DAISY DTB production to enhance the contents accessibility in the Open Library for Higher Education". The wide spread of subjects makes us believe that for the time being XML is here to stay what enhances the importance of gathering this community to discuss related science and technology. Small conferences are traversing a bad period. Authors look for impact and numbers and only submit their works to big conferences sponsored by the right institutions. However the group of people behind this conference still believes that spaces like this should be preserved and maintained. This 8th gathering marks the beginning of a new cycle. We know who we are, what is our identity and we will keep working to preserve that. We hope the publication containing the works of this year's edition will catch the same attention and interest of the previous editions and above all that this publication helps in some other's work. Finally, we would like to thank all authors for their work and interest in the conference, and to the scientific committee members for their review work.