Comparison of sample size formulae for 2x2 cross-over designs applied to bioequivalence studies

We consider the comparison of two formulations in terms of average bioequivalence using the 2 × 2 cross-over design. In a bioequivalence study, the primary outcome is a pharmacokinetic measure, such as the area under the plasma concentration by time curve, which is usually assumed to have a lognormal distribution. The criterion typically used for claiming bioequivalence is that the 90% confidence interval for the ratio of the means should lie within the interval (0.80, 1.25), or equivalently the 90% confidence interval for the differences in the means on the natural log scale should be within the interval (-0.2231, 0.2231). We compare the gold standard method for calculation of the sample size based on the non-central t distribution with those based on the central t and normal distributions. In practice, the differences between the various approaches are likely to be small. Further approximations to the power function are sometimes used to simplify the calculations. These approximations should be used with caution, because the sample size required for a desirable level of power might be under- or overestimated compared to the gold standard method. However, in some situations the approximate methods produce very similar sample sizes to the gold standard method. Copyright © 2005 John Wiley & Sons, Ltd.

A jackknife variance estimator for unequal probability sampling

The jackknife method is often used for variance estimation in sample surveys but has only been developed for a limited class of sampling designs.We propose a jackknife variance estimator which is defined for any without-replacement unequal probability sampling design. We demonstrate design consistency of this estimator for a broad class of point estimators. A Monte Carlo study shows how the proposed estimator may improve on existing estimators.

Evaluation of a sequential global test of improved recovery following stroke as applied to the ICTUS trial of citicoline

The International Citicoline Trial in acUte Stroke is a sequential phase III study of the use of the drug citicoline in the treatment of acute ischaemic stroke, which was initiated in 2006 in 56 treatment centres. The primary objective of the trial is to demonstrate improved recovery of patients randomized to citicoline relative to those randomized to placebo after 12 weeks of follow-up. The primary analysis will take the form of a global test combining the dichotomized results of assessments on three well-established scales: the Barthel Index, the modified Rankin scale and the National Institutes of Health Stroke Scale. This approach was previously used in the analysis of the influential National Institute of Neurological Disorders and Stroke trial of recombinant tissue plasminogen activator in stroke. The purpose of this paper is to describe how this trial was designed, and in particular how the simultaneous objectives of taking into account three assessment scales, performing a series of interim analyses and conducting treatment allocation and adjusting the analyses to account for prognostic factors, including more than 50 treatment centres, were addressed. Copyright (C) 2008 John Wiley & Sons, Ltd.

Adjusted jackknife for imputation under unequal probability sampling without replacement

Imputation is commonly used to compensate for item non-response in sample surveys. If we treat the imputed values as if they are true values, and then compute the variance estimates by using standard methods, such as the jackknife, we can seriously underestimate the true variances. We propose a modified jackknife variance estimator which is defined for any without-replacement unequal probability sampling design in the presence of imputation and non-negligible sampling fraction. Mean, ratio and random-imputation methods will be considered. The practical advantage of the method proposed is its breadth of applicability.

API-CALC 1.0: a computer program for calculating the average probability of identity allowing for substructure, inbreeding and the presence of close relatives

Individual identification via DNA profiling is important in molecular ecology, particularly in the case of noninvasive sampling. A key quantity in determining the number of loci required is the probability of identity (PIave), the probability of observing two copies of any profile in the population. Previously this has been calculated assuming no inbreeding or population structure. Here we introduce formulae that account for these factors, whilst also accounting for relatedness structure in the population. These formulae are implemented in API-CALC 1.0, which calculates PIave for either a specified value, or a range of values, for F-IS and F-ST.

Dung and nest surveys: estimating decay rates

1. Wildlife managers often require estimates of abundance. Direct methods of estimation are often impractical, especially in closed-forest environments, so indirect methods such as dung or nest surveys are increasingly popular. 2. Dung and nest surveys typically have three elements: surveys to estimate abundance of the dung or nests; experiments to estimate the production (defecation or nest construction) rate; and experiments to estimate the decay or disappearance rate. The last of these is usually the most problematic, and was the subject of this study. 3. The design of experiments to allow robust estimation of mean time to decay was addressed. In most studies to date, dung or nests have been monitored until they disappear. Instead, we advocate that fresh dung or nests are located, with a single follow-up visit to establish whether the dung or nest is still present or has decayed. 4. Logistic regression was used to estimate probability of decay as a function of time, and possibly of other covariates. Mean time to decay was estimated from this function. 5. Synthesis and applications. Effective management of mammal populations usually requires reliable abundance estimates. The difficulty in estimating abundance of mammals in forest environments has increasingly led to the use of indirect survey methods, in which abundance of sign, usually dung (e.g. deer, antelope and elephants) or nests (e.g. apes), is estimated. Given estimated rates of sign production and decay, sign abundance estimates can be converted to estimates of animal abundance. Decay rates typically vary according to season, weather, habitat, diet and many other factors, making reliable estimation of mean time to decay of signs present at the time of the survey problematic. We emphasize the need for retrospective rather than prospective rates, propose a strategy for survey design, and provide analysis methods for estimating retrospective rates.

Demographic models and the management of endangered species: a case study of the critically endangered Seychelles magpie robin

1. Demographic models are assuming an important role in management decisions for endangered species. Elasticity analysis and scope for management analysis are two such applications. Elasticity analysis determines the vital rates that have the greatest impact on population growth. Scope for management analysis examines the effects that feasible management might have on vital rates and population growth. Both methods target management in an attempt to maximize population growth. 2. The Seychelles magpie robin Copsychus sechellarum is a critically endangered island endemic, the population of which underwent significant growth in the early 1990s following the implementation of a recovery programme. We examined how the formal use of elasticity and scope for management analyses might have shaped management in the recovery programme, and assessed their effectiveness by comparison with the actual population growth achieved. 3. The magpie robin population doubled from about 25 birds in 1990 to more than 50 by 1995. A simple two-stage demographic model showed that this growth was driven primarily by a significant increase in the annual survival probability of first-year birds and an increase in the birth rate. Neither the annual survival probability of adults nor the probability of a female breeding at age 1 changed significantly over time. 4. Elasticity analysis showed that the annual survival probability of adults had the greatest impact on population growth. There was some scope to use management to increase survival, but because survival rates were already high (> 0.9) this had a negligible effect on population growth. Scope for management analysis showed that significant population growth could have been achieved by targeting management measures at the birth rate and survival probability of first-year birds, although predicted growth rates were lower than those achieved by the recovery programme when all management measures were in place (i.e. 1992-95). 5. Synthesis and applications. We argue that scope for management analysis can provide a useful basis for management but will inevitably be limited to some extent by a lack of data, as our study shows. This means that identifying perceived ecological problems and designing management to alleviate them must be an important component of endangered species management. The corollary of this is that it will not be possible or wise to consider only management options for which there is a demonstrable ecological benefit. Given these constraints, we see little role for elasticity analysis because, when data are available, a scope for management analysis will always be of greater practical value and, when data are lacking, precautionary management demands that as many perceived ecological problems as possible are tackled.

Quantitative pulsed phase thermography applied to steel plates

Pulsed Phase Thermography (PPT) has been proven effective on depth retrieval of flat-bottomed holes in different materials such as plastics and aluminum. In PPT, amplitude and phase delay signatures are available following data acquisition (carried out in a similar way as in classical Pulsed Thermography), by applying a transformation algorithm such as the Fourier Transform (FT) on thermal profiles. The authors have recently presented an extended review on PPT theory, including a new inversion technique for depth retrieval by correlating the depth with the blind frequency fb (frequency at which a defect produce enough phase contrast to be detected). An automatic defect depth retrieval algorithm had also been proposed, evidencing PPT capabilities as a practical inversion technique. In addition, the use of normalized parameters to account for defect size variation as well as depth retrieval from complex shape composites (GFRP and CFRP) are currently under investigation. In this paper, steel plates containing flat-bottomed holes at different depths (from 1 to 4.5 mm) are tested by quantitative PPT. Least squares regression results show excellent agreement between depth and the inverse square root blind frequency, which can be used for depth inversion. Experimental results on steel plates with simulated corrosion are presented as well. It is worth noting that results are improved by performing PPT on reconstructed (synthetic) rather than on raw thermal data.

ExtSym: a program to aid space-group determination from powder diffraction data

Once unit-cell dimensions have been determined from a powder diffraction data set and therefore the crystal system is known (e.g. orthorhombic), the method presented by Markvardsen, David, Johnson & Shankland [Acta Cryst. (2001), A57, 47-54] can be used to generate a table ranking the extinction symbols of the given crystal system according to probability. Markvardsen et al. tested a computer program (ExtSym) implementing the method against Pawley refinement outputs generated using the TF12LS program [David, Ibberson & Matthewman (1992). Report RAL-92-032. Rutherford Appleton Laboratory, Chilton, Didcot, Oxon, UK]. Here, it is shown that ExtSym can be used successfully with many well known powder diffraction analysis packages, namely DASH [David, Shankland, van de Streek, Pidcock, Motherwell & Cole (2006). J. Appl. Cryst. 39, 910-915], FullProf [Rodriguez-Carvajal (1993). Physica B, 192, 55-69], GSAS [Larson & Von Dreele (1994). Report LAUR 86-748. Los Alamos National Laboratory, New Mexico, USA], PRODD [Wright (2004). Z. Kristallogr. 219, 1-11] and TOPAS [Coelho (2003). Bruker AXS GmbH, Karlsruhe, Germany]. In addition, a precise description of the optimal input for ExtSym is given to enable other software packages to interface with ExtSym and to allow the improvement/modification of existing interfacing scripts. ExtSym takes as input the powder data in the form of integrated intensities and error estimates for these intensities. The output returned by ExtSym is demonstrated to be strongly dependent on the accuracy of these error estimates and the reason for this is explained. ExtSym is tested against a wide range of data sets, confirming the algorithm to be very successful at ranking the published extinction symbol as the most likely. (C) 2008 International Union of Crystallography Printed in Singapore - all rights reserved.

Effects of active information processing on the understanding of risk information

Two experiments investigated effects of active processing of risk information on participants' understanding and judgments. It was hypothesized that more active processing would lead to better understanding and differences in affective judgments (e.g. increased satisfaction and reduced perceived risk to health). In both experiments participants were given a written scenario about their being prescribed a fictitious medication. This medication was said to cause side effects in 2% of people who took it. Before answering a series of written questions, participants in the active conditions of both experiments were asked to carry out a reflective task (portraying the size of risk on a bar chart in Experiment 1 and answering a reflective question in Experiment 2). The results showed that active participants rated the likelihood of experiencing possible side effects significantly lower than passive participants (Experiment 1), and that active participants were significantly more satisfied with the information and judged perceived risk to health from taking the medication significantly lower than passive participants (Experiment 2). In both experiments, active participants were significantly more correct in their probability and frequency estimates. The studies demonstrate that active processing of risk information leads to improved understanding of the information given. This has important implications for risk communication. In the context of health, better understanding should lead to improved decision-making and health outcomes. Copyright (C) 2004 John Wiley Sons, Ltd.

Training conditional and cumulative risk judgements: the role of frequencies, problem-structure and Einstellung

Two experiments implement and evaluate a training scheme for learning to apply frequency formats to probability judgements couched in terms of percentages. Results indicate that both conditional and cumulative probability judgements can be improved in this manner, however the scheme is insufficient to promote any deeper understanding of the problem structure. In both experiments, training on one problem type only (either conditional or cumulative risk judgements) resulted in an inappropriate transfer of a learned method at test. The obstacles facing a frequency-based training programme for teaching appropriate use of probability data are discussed. Copyright (c) 2006 John Wiley & Sons, Ltd.