Portunus pulchricristatus (Gordon, 1931): an addition to crab fauna of Pakistan (northern Arabian Sea)

Portunus pulchricristatus (Gordon, 1931) is a rare species, to date we have obtained only three specimens, two males and a berried female which can be easily identified with the help of existing descriptions and illustrations. Brief account of the Pakistan material is given below. One male specimen (measuring 11.0 mm in carapace length) has been deposited in the National Museum of Natural History, Leiden (Reg.No.D.42393) the other two specimens housed in the Marine Reference Collection and Resource Centre (MRCC Cat. No.BRAC.491). The abbreviations used are cl. for carapace length and cb. for carapace breadth.

On the effect of tickler chain on the catches landed by a 55 ft. trawl net

The communication deals with the results of comparative tests conducted from Cochin base to study the effect of a tickler chain on the catches landed by a 55' shrimp otter trawl. The net was operated with and without chain and 82 hauls of 61 hours and 28 minutes total duration were made. The following are the conclusions: (a) the catch of shrimp per hour of trawling is increased by about 71% due to attachment of the chain to the ground rope; (b) the attachment of the tickler chain also increased the catch of fish by 25%. The increase in the catch of shrimps and fish is probably due to the disturbance caused by moving chain attached to the foot-rope.

Experiments in fishing with shrimp trawls: on the standardisation of tickler chain

The communication deals with the results of experiments conducted off Gujarat coast for the standardisation of "Tickler chain" for shrimp trawls. Of the short link chains made of 3.2 mm, 4.8 mm and 6.2 mm rods the second was observed to increase the yield of shrimp in the net and without in any way adversely affecting the performance of the gear. The chains used had no influence on the fish catch.

Role of transglutaminase-mediated cross-linking of protein in the temperature-dependent setting of Alaska pollack surimi

During the low temperature setting of fish paste, myosin heavy chain (MHC) is polymerized to cross-linked myosin heavy chain (CMHC), which is considered to occur by the action of endogenous transglutaminase (TGase). In this study the contribution of TGase on the setting of Alaska pollack surimi at different temperatures was studied. Alaska pollack surimi was ground with 3% NaCl, 30% h2o and with or without ethylene glycol bis (β-aminoethylether) N, N, N¹,N¹- tetra acetic acid (EGTA), an inhibitor of TGase. Among the pastes without EGTA, highest TGase activity was observed at 25°C but breaking force of the gel set at 25°C was lower than that set at 30°, 35°, and 40°C. Addition of EGTA (5m mol/kg) to the paste suppressed TGase activity at all setting temperatures from 20° to 40°C. Gelation of the pastes and cross-linking of MHC on addition of EGTA were suppressed completely at 20° and 25°C, partially at 30° and 35°C, and not at all at 40°C. The findings suggested that during the setting of Alaska pollack surimi TGase mediated cross-linking of MHC was strong at around 25°C but the thermal aggregation of MHC by non-covalent bonds was strong at above 35°C. Setting of surimi at 40°C and cross-linking of its MHC did not involve TGase.

Commodity and product identification for value chain analysis.

This commodity and product identification research was undertaken in the context of the CGIAR Research Program on Aquatic Agricultural Systems (AAS). AAS seeks to reduce poverty and improve food security for the millions of small-scale fishers and farmers who depend on the world’s floodplains, deltas and coasts. The objective of this research is to strengthen the capacity of AAS to undertake value chain studies with high potential impact on smallholders. The capacity-building aspect of this research was focused on the process of commodity and product identification for value chain analysis. Its scope was limited to fish and other aquatic animals and products in the Tonle Sap area identified for AAS intervention. The result of the identification process was the selection of a number of commodities and products that were deemed to involve a high number of smallholders along the value chain and that have high market development potential.

A cohesive approach to thin-shell fracture and fragmentation

We develop a finite-element method for the simulation of dynamic fracture and fragmentation of thin-shells. The shell is spatially discretized with subdivision shell elements and the fracture along the element edges is modeled with a cohesive law. In order to follow the propagation and branching of cracks, subdivision shell elements are pre-fractured ab initio and the crack opening is constrained prior to crack nucleation. This approach allows for shell fracture in an in-plane tearing mode, a shearing mode, or a bending of hinge mode. The good performance of the method is demonstrated through the simulation of petalling failure experiments in aluminum plates. © 2005 Elsevier B.V. All rights reserved.

EBSD characterisation of Y2Ba4CuUOx phase in melttextured YBCO with addition of depleted uranium oxide

Melt-textured YBCO samples processed with added Y2O3 and depleted uranium oxide (DU) contain nano-particles, which have been identified previously as Y2Ba4CuUOx (U-411). This phase has a cubic unit cell, which is clearly distinct from the orthorhombic Y-123 and Y-211 phases within the YBCO system. In samples with a high amount of DU addition (0.8 wt-% DU), U-2411 particles have sizes between 200 nm and several νm, so identification of the Kikuchi patterns of this phase becomes possible. Together with a parallel EDX analysis, the particles embedded in the Y-123 matrix can be identified unambiguously. In this way, a three-phase EBSD scan becomes possible, allowing also the identification of nanometre-sized particles in the sample microstructure. © 2006 IOP Publishing Ltd.