用硅钨、磷钨杂多酸催化合成双酚A的动力学

以硅钨和磷钨杂多酸为催化剂,研究了由丙酮和苯酚脱水缩合生成双酚A的反应动力学。结果表明,杂多酸的催化活性不如盐酸的,而且反应机理不同;硅钨杂多酸的催化活性高于磷钨杂多酸。由反应温度在60—80℃范围内的各速率常数及催化剂浓度为0.5—4％范围内各速率常数的测定,求得硅钨、磷钨杂多酸的反应活化能分别为86.9、88.0 kJ/mol;催化反应级数分别为0.97、0.77。

水溶性聚合物和两亲聚合物 13.低分子量聚丙烯酸及其钠盐的合成

低分子量(<2×10~4)聚丙烯酸(PAA)及其钠盐有着日趋广泛的应用前景,包括用作工业水系统的除垢、防垢剂,金属材料的新型淬火剂及造纸工业中所用颜料的分散剂等。为此已发展了一些合成方法,如使用链转移剂、在异丙醇-水混合溶剂中聚合、用金属盐-

四(2,4-二特戊基苯氧基)酞菁铜LB膜的制备及结构表征

酞菁类化合物具有良好的热稳定性和化学稳定性,已被广泛应用于光敏,气敏,及分子电子器件等领域。用LB方法对酞菁类化合物进行分子组装,用光谱等手段对其膜结构进行表征已引起人们的重视。本文作者之一合成了具有良好LB成膜特性的四(2,4-二特戊基苯

CAMOS:人工智能结构解析Ⅲ亚结构集合分析中图论的应用

本文介绍一种用于亚结构集合分析的图论方法.该方法将亚结构描述成分子结构子图,用不饱和度表征子图的联接性,并设计了验证生成分子完全连通图的算法.应用该方法不仅可以筛除不能构成完整分子的亚结构集合,而且能将用于生成链状分子和环状分子的亚结构集合分开,对于提高结构解析的效率十分有效.程序用FORTRAN-77语言编写,在PDP-11/24计算机上实现.

CAMOS:人工智能结构解析 Ⅴ碳-13 NMR谱用于结构确认

本文介绍在CAMOS系统中应用碳-13 NMR谱确认候选结构的方法.将候选结构的模拟谱与未知物实验谱进行比较,可以推测候选结构的可信度.其方法有谱峰个数比较、化学位移比较及波谱相似度计算,已得到满意的结果.程序用FORTRAN 77语言编写,可在小型机或微机上运行.

SYNTHESES OF BIS(TERT-BUTYLCYCLOPENTADIENYL)LANTHANOID CHLORIDE COMPLEXES AND CRYSTAL-STRUCTURES OF BIS(TERT-BUTYLCYCLOPENTADIENYL)CHLORO(BISTETRAHYDROFURAN)-PRASEODYMIUM AND BIS(TERT-BUTYLCYCLOPENTADIENYL)-CHLOROTETRAHYDROFURANYTTERBIUM

Reaction of lanthanoid trichloride with two equivalents of sodium t-butylcyclopentadienide in tetrahydrofuran affords bis(t-butylcyclopentadienyl)lanthanoid chloride complexes (t-BuCp)2LnCl. nTHF (Ln = Pr, Nd, n = 2; Ln = Gd, Yb, n = 1). The compound (t-BuCp)2PrCl.2THF (1) crystallizes from THF in monoclinic space group P2(1)/c with unit cell dimensions a = 15.080(3), b = 8.855(2), c = 21.196(5) angstrom, beta = 110.34(2)degrees, V = 2653.9 angstrom-3 and D(calcd) = 1.41 g/cm3 for Z = 4. The central metal Pr is coordinated to two t-BuCp ring centroids, one chlorine atom and two THF forming a distorted trigonal bipyramid. The crystal of (t-BuCp)2YbCl.THF (2) belongs to the monoclinic crystal system, space group P2(1)/n with a = 7.726(1), b = 12.554(2), c = 23.200(6) angstrom, beta = 97.77(2)degrees, V = 2229.56 angstrom-3, D(calcd) = 1.50 g/cm3 and Z = 4. The t-BuCp ring centroids, the chlorine atom and the oxygen atom of the THF describe a distorted tetrahedron around the central ion of ytterbium.

稀土-其它过渡金属混合催化剂用于共轭双烯烃的聚合——Ⅳ.(NdCl_3+FeCl_3)·nphen-HAI(i-Bu)_2体系对异戊二烯的聚合

本文报道由(NdCl_3+FeCl_3)·nphen-HAl(i-Bu)_2催化体系引发异戊二烯聚合的结果。在适当Nd/Pe比下,该体系对异戊二烯聚合的活性可超过单一钕或铁催化剂的活性,同时随催化剂中钕和铁含量的不同,所得产物的微观结构变化很大,当体系中钕含量由100％→0时,产物的顺-1,4结构含量由94.4％→22.1％,而3,4结构含量由5.6％→77.9％。Al/M(N=Nd+Fe)比、单体浓度和聚合温度不仅对聚合活性有影响,对产物的微观结构影响也较大。事实表明,该聚合体系中存在着两种过渡金属(Nd和Fe)活性中心,它们按各自的机理进行异戊二烯的聚合。

双阳原油热处理中加入降凝剂的研究

以双阳原油为研究对象,选用EVA(乙烯-醋酸乙烯共聚物)作原料,用马来酸酐接枝改性,合成EJ-6降凝剂,采取在热处理中加入降凝剂的综合处理方法,考察了降凝剂合成的最佳反应条件和降凝剂用量及热处理温度对原油结晶状态及流动性的影响。结果表明,热处理中加入EJ-6降凝剂可使蜡的结晶状态发生明显变化。降凝剂用量仅100～500ppm,即可使双阳原油的凝点由原来的30～31℃降至7～9℃,原油的低温流动性大为改善。

SYNTHESIS OF A NEW TYPE OF CH3CN-COORDINATED LANTHANIDE COMPOUNDS LN(CH3CN)9(ALCL4)3CH3CN

Acetonitrile is a weakly donating ligand. The cationic compounds of CH_3CN-coordinated transition metal are versatile homogeneous catalysts for the polymerization and isomerization of olefins and cycloolefins. The cationic compound of lanthanide[Eu(CH_3·CN)_3(BF_4)_3]_n was prepared from the oxidation of Eu with NOBF_4 in CH_3CN by Thomas in 1986. It was found that [Eu(CH_3CN)_3(BF_4)_3]_n can catalyze the polymerization of styrene cyclohexadiene and other olefins. However, there is no information about...

尼龙-1010结晶结构

用WAXD方法测定了Nylon-1010为三斜晶系结晶结构;α=4.9(?),b=5.4(?),c=27.8(?),α=49°,β=77°,γ=63.5°,每个聚合物单胞含有一个重复单元,空间群为P(?)。模压试样用Ruland方法分析结晶度为60％。以上。电子密度相关函数法分析了SAXS现象,求得了Nylon-1010结晶片层厚度、过渡层厚度、长周期、比内表面及电子密度差。

Ce_(0.9)RE_(0.1)P_5O_(14)晶体中Ce~(3+)的发光寿命研究

利用时间相关单光子计数方法系统地测定了Ce_(0.9)RE_(0.1)P_5O_(14)晶体中Ce~(3+)的发光寿命。发现荧光寿命数值能够较好地说明双掺晶体中除Ce而外的其它稀土离子对Ce~(3+)的发光强度的增强或猝灭现象。

1,5,9-环十二碳三烯的阳离子型跨环齐聚合反应

本文研究1,5,9-环十二碳三烯在阳离子型引发剂AlCl_3和BF_3·OEt_2催化下进行的跨环聚合反应,考察各种反应条件对跨环聚合反应的影响。产物为白色粉末,分子量均在1096—1431之间。对其溶解性、核磁共振和红外光谱的分析,确认了它的结构。

Ce_(0.9)Yb_(0.1)P_5O_(14)晶体的光电压光谱

前文在研究五磷酸铈晶体中Ln~(3+)对Ce~(3+)发光强度的影响时,发现当加入少量的Eu~(3+)和Yb~(3+)离子到CeP_5O_(14)晶体中能使Ce~(3+)的发射产生严重的猝灭现象,以致于用Ce~(3+)的302nm吸收带激发晶体时,观察不到Ce~(3+)的发射,或者十分微弱。令人费解的是Yb~(3+)离子在紫外和可见区无吸收带,Yb~(3+)离子的加入应该成为一个稀释离子,现却使Ce~(3+)的发射产生严

Complete mitochondrial genome of the sea cucumber Apostichopus japonicus (Echinodermata: Holothuroidea): The first representative from the subclass Aspidochirotacea with the echinoderm ground pattern

Complete mitochondrial genome plays an important role in the accurate revelation of phylogenetic relationships among metazoans. Here we present the complete mitochondrial genome sequence from a sea cucumber Apostichopus japonicus (Echinodermata: Holothuroidea), which is the first representative from the subclass Aspidochirotacea. The mitochondrial genome of A. japonicus is 16,096 bp in length. The heavy strand consists of 31.8% A, 20.2% C, 17.9% G, and 30.1% T bases (AT skew = 0.027: GC skew = 0.062). It contains thirteen protein-coding genes (PCGs), twenty-two transfer RNA genes, and two ribosomal RNA genes. There are a total of 3793 codons in all thirteen mitochondrial PCGs, excluding incomplete termination codons. The most frequently used amino acid is Leu (15.77%), followed by Set (9.73%), Met (8.62%), Phe (7.94%), and Ala (7.28%). Intergenetic regions in the mitochondrial genome of A. japonicus are 839 bp in total, with three relatively large regions of Unassigned Sequences (UAS) greater than 100 bp. The gene order of A. japonicus is identical to that observed in the five studied sea urchins, which confirms that the gene order shared by the two classes (Holothuroidea and Echinoidea) is a ground pattern of echinoderm mitochondrial genomes. Bayesian tree based on the cob gene supports the following relationship: (outgroup, (Crinoids, (Asteroids, Ophiuroids, (Echinoids, Holothuroids)))). (C) 2009 Elsevier B.V. All rights reserved.

Improvement of polyploidy induction in Eriocheir sinensis

An incubating temperature of 15 degreesC is used to induce triploidy in Etiocheir sinensis through inhibition of the release of polar body H, and that of 18 degreesC to induce tetraploidy through inhibition of the first cleavage. Flow cytometry is used to identify the ploidy in different developmental stages. For induction of triploidy in fertilized eggs in vitro, the highest induction rate observed in blastula by cytochalasin B, 6-DMAP and KCI is 49.1%, 51.7% and 77.5%, respectively. In the KCI treatment of pregnant crabs with the fertilized eggs, the highest triploid induction rate observed in the zoea is 85.3%. For induction of tetraploidy, the highest induction rate observed in the blastula by cytochaslasin 13, 6-DMAP and KCI is 50.3%, 54.9% and 79.8% respectively. In the KCI treatment of pregnant crabs with the fertilized eggs, the highest induction rate in zoea is 27.3%. Through this study such difficulty as in vitro culture is overcome. Triploid zoea Etiocheir sinensis has been developed for the first time. The induction rate of tetraploid zoea has also been greatly improved.