In-doped multifilled n-type skutterudites with ZT=1.8

In this paper we maximize the thermoelectric (TE) figure of merit, ZT, of n-type skutterudites, (In,Sr,Ba,Yb)(y)Co4Sb12, via three different routes: (i) find the optimum fraction of In as fourth filler (ii) check the influence of powder particle, grain, and crystallite size on the TE properties and (iii) check thermal stability. Filled n-type (Sr, Ba, Yb)(y)Co4Sb12 was mixed in three different proportions with In0.4Co4Sb12, ball milled (regular or high-energy (HB) ball milling) and hot-pressed. Particle size analyses and SEM pictures of the broken surfaces of the hot pressed samples document that only HB produces uniform particles/grains with average crystallite sizes similar to 100 nm, proven by transmission electron microscopy. X-ray Rietveld refinements combined with EDX indicate that in all cases indium entered the icosahedral voids of the skutterudite. Temperature dependent physical properties of all three regularly ball-milled samples show that increasing In-content infers an increasing electrical resistivity, increasing Seebeck coefficient but a decreasing total thermal conductivity. Although ZT (823 K) is in the same range as for the sample without In, the ZT values in the whole temperature range are higher and consequently the TE-conversion efficiency, eta is at least 10% higher. Annealing the samples at 600 degrees C for three days shows minor changes in structure and thermoelectric properties, indicating TE stability. The HB sample, due to uniformly small particles, equally sized grains and crystallites, exhibits a high power factor (4.4 mW/m K-2 at 730 K) and a very low thermal conductivity leading to an outstanding high ZT = 1.8 at 823 K (eta(max) = 17.5%). (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Suspensions of polymer-grafted nanoparticles with added polymers-Structure and effective pair-interactions

We present the results of combined experimental and theoretical (molecular dynamics simulations and integral equation theory) studies of the structure and effective interactions of suspensions of polymer grafted nanoparticles (PGNPs) in the presence of linear polymers. Due to the absence of systematic experimental and theoretical studies of PGNPs, it is widely believed that the structure and effective interactions in such binary mixtures would be very similar to those of an analogous soft colloidal material-star polymers. In our study, polystyrene-grafted gold nanoparticles with functionality f = 70 were mixed with linear polystyrene (PS) of two different molecular weights for obtaining two PGNP: PS size ratios, xi = 0.14 and 2.76 (where, xi = M-g/M-m, M-g and M-m being the molecular weights of grafting and matrix polymers, respectively). The experimental structure factor of PGNPs could be modeled with an effective potential (Model-X), which has been found to be widely applicable for star polymers. Similarly, the structure factor of the blends with xi = 0.14 could be modeled reasonably well, while the structure of blends with xi = 2.76 could not be captured, especially for high density of added polymers. A model (Model-Y) for effective interactions between PGNPs in a melt of matrix polymers also failed to provide good agreement with the experimental data for samples with xi = 2.76 and high density of added polymers. We tentatively attribute this anomaly in modeling the structure factor of blends with xi = 2.76 to the questionable assumption of Model-X in describing the added polymers as star polymers with functionality 2, which gets manifested in both polymer-polymer and polymer-PGNP interactions especially at higher fractions of added polymers. The failure of Model-Y may be due to the neglect of possible many-body interactions among PGNPs mediated by matrix polymers when the fraction of added polymers is high. These observations point to the need for a new framework to understand not only the structural behavior of PGNPs but also possibly their dynamics and thermo-mechanical properties as well. (C) 2015 AIP Publishing LLC.

Tuning of dielectric, pyroelectric and ferroelectric properties of 0.715Bi(0.5)Na(0.5)TiO(3)-0.065BaTiO(3)-0.22SrTiO(3) ceramic by internal clamping

This study systematically investigates the phenomenon of internal clamping in ferroelectric materials through the formation of glass-ceramic composites. Lead-free 0.715Bi(0.5)Na(0.5)TiO(3)-0.065BaTiO(3)-0.22SrTiO(3) (BNT-BT-ST) bulk ferroelectric ceramic was selected for the course of investigation. 3BaO - 3TiO(2) - B2O3 (BTBO) glass was then incorporated systematically to create sintered samples containing 0%, 2%, 4% and 6% glass (by weight). Upon glass induction features like remnant polarization, saturation polarization, hysteresis losses and coercive field could be varied as a function of glass content. Such effects were observed to benefit derived applications like enhanced energy storage density similar to 174 k J/m(3) to similar to 203 k J/m(3) and pyroelectric coefficient 5.7x10(-4) Cm-2K-1 to 6.8x10(-4) Cm-2K-1 by incorporation of 4% glass. Additionally, BNT-BT-ST depolarization temperature decreased from 457K to 431K by addition of 4% glass content. Glass incorporation could systematically increases diffuse phase transition and relaxor behavior temperature range from 70 K to 81K and 20K to 34 K, respectively when 6% and 4% glass content is added which indicates addition of glass provides better temperature stability. The most promising feature was observed to be that of dielectric response tuning. It can be also used to control (to an extent) the dielectric behavior of the host ceramic. Dielectric permittivity and losses decreased from 1278 to 705 and 0.109 to 0.107 for 6% glass, at room temperature. However this reduction in dielectric constant and loss increases pyroelectric figures of merit (FOMs) for high voltage responsivity (F-v) high detectivity (F-d) and energy harvesting (F-e) from 0.018 to 0.037 m(2)C(-1), 5.89 to 8.85 mu Pa-1/2 and 28.71 to 61.55 Jm(-3)K(-2), respectively for 4% added ceramic-glass at room temperature. Such findings can have huge implications in the field of tailoring ferroelectric response for application specific requirements. (C) 2015 Author(s).

Evolutionary and structural analyses of heterodimeric proteins composed of subunits with same fold

Heterodimeric proteins with homologous subunits of same fold are involved in various biological processes. The objective of this study is to understand the evolution of structural and functional features of such heterodimers. Using a non-redundant dataset of 70 such heterodimers of known 3D structure and an independent dataset of 173 heterodimers from yeast, we note that the mean sequence identity between interacting homologous subunits is only 23-24% suggesting that, generally, highly diverged paralogues assemble to form such a heterodimer. We also note that the functional roles of interacting subunits/domains are generally quite different. This suggests that, though the interacting subunits/domains are homologous, the high evolutionary divergence characterize their high functional divergence which contributes to a gross function for the heterodimer considered as a whole. The inverse relationship between sequence identity and RMSD of interacting homologues in heterodimers is not followed. We also addressed the question of formation of homodimers of the subunits of heterodimers by generating models of fictitious homodimers on the basis of the 3D structures of the heterodimers. Interaction energies associated with these homodimers suggests that, in overwhelming majority of the cases, such homodimers are unlikely to be stable. Majority of the homologues of heterodimers of known structures form heterodimers (51.8%) and a small proportion (14.6%) form homodimers. Comparison of 3D structures of heterodimers with homologous homodimers suggests that interfacial nature of residues is not well conserved. In over 90% of the cases we note that the interacting subunits of heterodimers are co-localized in the cell. Proteins 2015; 83:1766-1786. (c) 2015 Wiley Periodicals, Inc.

A Pd-8 Tetrafacial Molecular Barrel as Carrier for Water Insoluble Fluorophore

A new carbazole-based tetraimidazole ligand 1,3,6,8-tetra(1H-imidazol-1-yl)-9-methyl-9H-carbazole (L) has been synthesized. The unsymmetrical nature of L as well as the rotational freedom of imidazole donor moieties around C-N bond make it a special building unit, which upon treatment with cis-(tmeda)Pd(NO3)(2) produced an unprecedented single linkage-isomeric Pd-8 tetrafacial molecular nanobarrel (PSMBR-1) tmeda N,N,N',N'-tetramethylethane-1,2-diamine]. Unlike closed architectures, open barrel architecture of water-soluble PSMBR-1 makes it an ideal host for some water insoluble polyaromatic hydrocarbons in aqueous medium; one such inclusion complex coroneneCPSMBR-1 was characterized by X-ray diffraction study. Moreover, the potential application of PSMER-1 as carrier in aqueous medium for the transportation of water insoluble fluorophore (perylene) for live cell imaging is explored.

Reply to Discussion on ``Bearing capacity of circular footings over rock mass by using axisymmetric quasi lower bound finite element limit analysis'' Comput. Geotech. 70 (2015) 138-149]

A discussion has been provided for the comments raised by the discusser (Clausen, 2015)1] on the article recently published by the authors (Chakraborty and Kumar, 2015). The effect of exponent alpha for values of GSI approximately smaller than 30 becomes more critical. On the other hand, for greater values of GSI, the results obtained by the authors earlier remain primarily independent of alpha and can be easily used. (C) 2015 Elsevier Ltd. All rights reserved.

Status of the 98-125 GeV Higgs bosons scenario with updated LHC-8 data

In the context of the minimal supersymmetric standard model (MSSM), we discuss the possibility of the lightest Higgs boson with mass M-h = 98 GeV to be consistent with the 2.3 sigma excess observed at the LEP in the decay mode e(+)e(-) -> Zh, with h -> b (b) over bar. In the same region of the MSSM parameter space, the heavier Higgs boson (H) with mass M-H similar to 125 GeV is required to be consistent with the latest data on Higgs coupling measurements at the end of the 7 + 8 TeV LHC run with 25 fb(-1) of data. While scanning the MSSM parameter space, we impose constraints coming from flavor physics, relic density of the cold dark matter as well as direct dark matter searches. We study the possibility of observing this light Higgs boson in vector boson fusion process and associated production with W/Z-boson at the high luminosity (3000 fb(-1)) run of the 14 TeV LHC. Our analysis shows that this scenario can hardly be ruled out even at the high luminosity run of the LHC. However, the precise measurement of the Higgs signal strength ratios can play a major role to distinguish this scenario from the canonical MSSM one.

Tetraphenylethene-Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds

This study reports the synthesis and photophysical properties of a star-shaped, novel, fluoranthene-tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation-induced blue-shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature-dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6-trinitrophenol (PA) with high sensitivity and a high Stern-Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70% water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70% exhibit high Stern-Volmer constants (K-sv=79998 and 51120m(-1), respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra-low-level detection of PA for real-time field analysis.

Investigation of kerosene combustion characteristics with pilot hydrogen in model supersonic combustors

Experimental investigations on the ignition and combustion stabilization of kerosene with pilot hydrogen in Mach 2.5 airflows were conducted using two test combustors, with cross sections of 30.5 x 30 and 51 x 70 mm, respectively. Various integrated modules, including the combinations of different pilot injection schemes and recessed cavity flameholders with different geometries, were designed and tested. The stagnation pressure of vitiated air varied within the range of 1.1-1.8 NiPa, while the stagnation temperature varied from 1500 to 1900 K. Specifically, effects of the pilot hydrogen injection scheme, cavity geometry, and combustor scaling on the minimally required pilot hydrogen equivalence ratio were systematically examined. Results indicated that the cavity depth and length had significant effects on the ignition and flameholding, whereas the slanted angle of the aft wall was relatively less important. Two cavities in tandem were shown to be a more effective flameholding mechanism than that with a single cavity. The minimally required pilot hydrogen equivalence ratio for kerosene ignition and stable combustion was found to be as low as 0.02. Furthermore, combustion efficiency of 80% was demonstrated to be achievable for kerosene with the simultaneous use of pilot hydrogen and a recessed cavity to promote the ignition and global burning.

8阶群速度控制格式及其应用

构造了8阶精度的群速度控制型差分格式.根据激波捕捉能力及对小尺度分辨能力对格式系数进行了优化.采用该格式对可压缩均匀各向同性湍流进行了直接数值模拟,所计算的最大湍流马赫数达到0.95.相同计算条件下的结果与他人结果吻合较好,说明了格式在捕捉激波的同时对湍流小尺度有较好的分辨能力.

Evaluación temporal y espacial en el bosque de Pinus oocarpa Schiede y su impacto sobre la fijación de carbono en el municipio de Dipilto

El objetivo de este estudio fue a nalizar el cambio de uso de suelo durante un periodo de 18 años en las áreas de bosque de pino y su influencia en la fijación de bióxido de carbono en el Municipio de Dipilto, Nueva Segovia . Se seleccionaron 3 Fincas : San Martín, El Sarrete y Campofresco que presentaron estados de desarrollo: bosque maduro, bosque joven y bosque en regeneración. Se establecieron 9 parcelas temporales (con predominancia P. oocarpa ), utilizándose una parcela temporal para cada es tado d esarrollo. En cada estado de desarrollo se derribó un árbol tipo, se separó en tallo, ramas y follaje. La mayor par te de biomasa seca se encuentra en la finca San Martin con 99.12 Mg/ha estado en desarrollo maduro , estado en desarrollo joven con 77.70 Mg/ ha y estado en desarrollo regeneración 38.63 Mg/ha . El Factor de expansión de biomasa en San Martin 1.59 esta do en desarrollo regeneración, El Sarrete para el estado en desarrollo maduro 1 .40 y finca Campofresco 1.27 estado desarrollo joven . El total de ca rbono almacenado lo presentó San Martín para el estado en desarrollo maduro con 27.13 Mg/ha , joven 22.06 Mg/ha y estado en desarrollo regeneraci ón con 9.82 Mg/ha . El contenido de carbono en el suelo 826.89 Mg/ha regeneración, 503.96 Mg/ha Joven , 294.55 Mg/ ha maduro en San Martín de 0 a 20 cm de profundidad. En un 38.49 % de esa área se emitieron entre 0 - 15 Mg/ha . Emisiones de 26 - 30 Mg/ha se presentaron en un 17.8 1 % del área. Existe un 48.19 % del área total que fijo rangos de 26 - 30 Mg/ha y un 38. 49 % de las áreas fij aron entre 0 - 15 Mg /ha . Se encontró un balance neto positivo de 2925. 2 1 hectáreas, de las cuales 1981.25 hectáreas fijaron rangos de 26 - 30 Mg/ha, 606.06 hectáre as fijaron en un rango entre 0 - 15 Mg /ha y el rango 16 - 25 Mg/ha 337.89 hect áreas .

蛋白质吸附和竞争吸附对ROS 17/2.8细胞粘附和生长的影响

细胞在材料表面的粘附是贴壁依赖型细胞生长的前提.本文以胶原和牛血清蛋白(BSA)为模型蛋白,研究了两者的吸附和竞争吸附对细胞粘附和生长的影响.

Estudio de pre-factibilidad de una propuesta de desarrollo ganadero para la finca "El Garabato" en Tola, Rivas

En el presente trabajo se evaluó EX-ante la factibilidad técnica y financiera de una propuesta de desarrollo ganadero para la finca "El Garabato" planteada por los socios de la Cooperativa Ezequiel N24 en el Municipio de Tola, Departamento de Rivas. Para ello se realizó un diagnóstico general de la finca, donde se determinó los recursos disponibles y las características propias del sistema productivo, basados en esto se estimaron los diferentes coeficientes técnicos así como las posibles fuentes de ingresos y egresos, permitiendo realizar las proyecciones del hato así como las proyecciones financieras, Dentro de los aspectos técnicos se determinó la composición de las pasturas donde el 69% de los pastos son naturalizados, el 23% son pastos mejorados y el 8% está conformado por pastos naturales. Los canales de comercialización en la zona del proyecto para la leche están representados por los manteros, el Proyecto Juan Agustín Guillén de la Tienda Campesina y el Centro de Acopio de La Selecta. En el caso de la carne por los intermediarios (matarifes) y productores dedicados a la crianza y engorde de novillos. Al considerar las inversiones en pastura que conlleva la propuesta, la distribución de pastos varia, ocupando los pastos mejorados el 41%, el 3% por pastos naturales y el 56% corresponden a pastos naturalizados. A la par de esto el área ganadera se incrementa en 64 mz. como consecuencia de la reducción del área agricola por la misma cantidad de mz. Las disponibilidades de pastos se ven mejoradas por las inversiones, disminuyendo el déficit de alimento a partir del segundo año. El uso de la Caña de Azúcar más urea, durante el verano permitirá mejorar la oferta de alimento para esta época, resultando menores pérdidas en la producción. Como efecto de la propuesta se producirá un incremento promedio anual de 7.18% del hato total, este incremento se da esperando que los índices de mortalidad de adultos y terneros disminuyan de un 4 al. 2% y de 14 al 7% respectivamente y que la tasa de descarte de vacas se mantenga en 12%1 considerando que la finca mantenga un 67% en tasa de natalidad. Al estructurar los gastos se encontró que en el año base los gastos de mano de obra representan el 71%, la suplementación el 8%, los gastos en manejo fueron de 8%, impuestos 7%, mantenimiento de equipo e infraestructura de 4% y gastos varios de 1%, con el proyecto esta estructura de gastos se ve un poco alterada al disminuir los gastos por mano de obra a un 63% e incrementarse los gastos por suplementacion y gastos varios a 12% y 6% respectivamente, el resto de los gastos presentan leves modificaciones. En los ingresos del año base la producción de leche representa el 46%, la producción de carne el 53% y el 1% corresponde a otros ingresos. Con el proyecto el aporte en los ingresos por producción de leche asciende a 62% y en producción de carne es de 34%, en otros ingresos representa el 4% al finalizar el sexto año. De las inversiones que se realizaran el 60% ésta destinado para pastos y el 40% corresponde a inversiones en infraestructura. El monto total de la inversión asciende a C$96,905.70 de los cuales el 71% será solicitado en préstamo y el restante 29% será asumido por la Cooperativa. Del análisis financiero resultó que la propuesta de los socios con uso de financiamiento para las inversiones a una tasa de interés del 12.5% presenta un VAN de C$41996.65 y una TIR de 15.16%. En cambió la realización de la propuesta con recursos propios presentó resultados superiores al anterior siendo el VAN de C$18,506.01 y una TIR de 18.01%•. Considerando estos resultados la propuesta es rentable, pero debido al déficit de efectivo que se presenta en los primeros años podría alterar la realización de las inversiones, ésta situación puede compensarse haciendo uso de otros recursos de la Cooperativa.

The challenge of cancer control in Africa.

While the world is focused on controlling the spread of diseases such as HIV and malaria in the developing world, another approaching epidemic has been largely overlooked. The World Heath Organization predicts that there will be 16 million new cancer cases per year in 2020 and 70% of these will be in the developing world. Many of these cancers are preventable, or treatable when detected early enough. Establishing effective, affordable and workable cancer control plans in African countries is one step in the right direction toward limiting this epidemic.

Efecto de la suplementación con calcio y fósforo bajo pastoreo rotacional en novillos finalizadores

El presente trabajo de investigación se realizó para estudiar los rendimientos productivos en ganancia de peso (GP), ganancia media diaria (GMD) en relación a la suplementación de los minerales Calcio y Fosforo en la dieta diaria alimenticia de novillos finalizadores. Además se evaluaron las utilidades economicas de los tratamientos. Para tal efecto se definieron tres tratamientos: T1 - Indica el grupo control con 70 gr. de Cloruro de Sodio (NaCl) por animal por día. T2 - Es el suministro de 41.67 gr de NaCl y 8.33 gr. de Pecutrin por animal por día. T3 - Es el suministro de 46.67 gr. de NaCl y 23.33 gr. de Pecutrin por animal por día. Cada tratamiento se conformó de 15 novillos con peso promedio inicial de 278.5 kg. bajo pastoreo rotacional con pastos Jaragua (Hyperhenia r), Gamba (Andropogum g), Colonial (Panicum)en época lluviosa sin fertilización y alta disponibilidad de pasturas. El Diseño experimental utilizado fue el Diseño completamente al Azar (DCA) para las variables peso vivo (PV), Ganancia media Diaria (GMD), contenido mineral de Calcio y Fosforo en el suero sanguíneo por tratamiento. Los resultados obtenidos en ganancia de peso vivo, demostraron que T3 (1.0556 Kg) obtuvo una mayor significacion con respecto a los tratamientos T1 (0.9254 Kg) y T2 (o.629T Kg). El contenido mineral de Calcio y Fosforo en el suero sanguíneo por tratamientos registro que el tratamiento T1 no tuvo diferencias significativas con el T2, pero si ambos tratamientos (T3 y T2) con respecto al T1, para el caso del Calcio. Para el contenido mineral Fosforo, no existe diferencias significativas para los tres tratamientos. Al realizarse el análisis económico a través de presupuestos parciales, el tratamiento que obtuvo mayor rentabilidad fue el T1 con 43.36%, seguido del tratamiento T3 con 39.55%. Queda demostrado que el suministro de 23.33 gr. de Pecutrin con 46.6 gr. Cloruro de Sodio (NaCl) en la dieta alimentaria de novillos finalizadores indico una mayor ganancia de peso vivo y una mayor ganancia media diaria en pesos. Económicamente el tratamiento que mayor rentabilidad demostró es el control (T1), seguido del tratamiento T3. El tratamiento T3 demostró mejores resultados en cuanto a pesos y rentabilidad obtenidos, y que su rentabilidad sería mayor si sus costos de inversión hubiesen sido reducidos en un 20% del valor real.