Multiply conditioned analyses of stratification in highly swirling methane/air flames

The effects of stratification on a series of highly swirling turbulent flames under globally lean conditions (φg=0.75) are investigated using a new high-spatial resolution multi-scalar dataset. This dataset features two key properties: high spatial resolution which approaches the 60 micron optical limit of the measurement system, and a wavelet oversampling methodology which significantly reduces the influence of noise. Furthermore, the very large number of realizations (30,000) acquired in the stratified cases permits statistically significant results to be obtained even after aggressive conditioning is applied. Data are doubly conditioned on equivalence ratio and the degree of stratification across the flame in each instantaneous realization. The influence of stoichiometry is limited by conditioning on the equivalence ratio at the location of peak CO mass fraction, which is shown to be a good surrogate for the location of peak heat release rate, while the stratification is quantified using a linear gradient in equivalence ratio across the instantaneous flame front. This advanced conditioning enables robust comparisons with the baseline lean premixed flame. Species mass fractions of both carbon monoxide and hydrogen are increased in temperature space under stratified conditions. Stratification is also shown to significantly increase thermal gradients, yet the derived three-dimensional flame surface density is shown to be relatively insensitive to stratification. Whilst the presence of instantaneous stratification broadens the curvature distribution relative to the premixed case, the degree of broadening is not significantly influenced by the range of global stratification ratios examined in this study. © 2012 The Combustion Institute.

Material efficiency: providing material services with less material production.

Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations-- for instance to do with building design, planning or vehicle standards--is likely to have a more immediate effect.

Transitions to material efficiency in the UK steel economy.

Steel production is energy intensive so already has achieved impressive levels of energy efficiency. If the emissions associated with steel must be reduced in line with the requirements of the UK Climate Change Act, demand for new steel must be reduced. The strategies of 'material efficiency' aim to achieve such a reduction, while delivering the same final services. To meet the emissions targets set into UK law, UK consumption of steel must be reduced to 30 per cent of present levels by 2050. Previous work has revealed six strategies that could contribute to this target, and this paper presents an approximate analysis of the required transition. A macro-economic analysis of steel in the UK shows that while the steel industry is relatively small, the construction and manufacturing sectors are large, and it would be politically unacceptable to pursue options that lead to a major contraction in other sectors. Alternative business models are therefore required, and these are explored through four representative products--one for each final sector with particular emphasis given to options for reducing product weight, and extending product life. Preliminary evidence on the triggers that would lead to customers preferring these options is presented and organized in order to predict required policy measures. The estimated analysis of transitions explored in this paper is used to define target questions for future research in the area.

The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand.

In this paper, we review the energy requirements to make materials on a global scale by focusing on the five construction materials that dominate energy used in material production: steel, cement, paper, plastics and aluminium. We then estimate the possibility of reducing absolute material production energy by half, while doubling production from the present to 2050. The goal therefore is a 75 per cent reduction in energy intensity. Four technology-based strategies are investigated, regardless of cost: (i) widespread application of best available technology (BAT), (ii) BAT to cutting-edge technologies, (iii) aggressive recycling and finally, and (iv) significant improvements in recycling technologies. Taken together, these aggressive strategies could produce impressive gains, of the order of a 50-56 per cent reduction in energy intensity, but this is still short of our goal of a 75 per cent reduction. Ultimately, we face fundamental thermodynamic as well as practical constraints on our ability to improve the energy intensity of material production. A strategy to reduce demand by providing material services with less material (called 'material efficiency') is outlined as an approach to solving this dilemma.

鲤鱼(Cyprinus carpio L．)GH受体的分子克隆及其两种转录子的发现

应用反转录-PCR及RACE技术,从二龄鲤鱼肝组织中克隆了生长激素受体(GHR)的全长基因,其开放阅读框编码602个氨基酸,其中包括244个氨基酸的胞外激素结合结构域,24个氨基酸的跨膜区域和334个氨基酸的胞内信号传导区域．序列分析表明：无论在基因水平还是蛋白质水平,鲤鱼GHR与鲫鱼GHR均具有较高的同源性．用一对基因特异性引物在研究二龄鲤鱼GHR的组织分布时发现：肝与其他组织的扩增产物大小不一致(肝组织中的约小100 bp),测序结果以及基因组PCR表明这是由于一个97 bp的内含子选择性剪切造成的．

单性生殖动物的进化

传统的观念认为 ,单性动物由于失去了重组机会 ,必然难以适应变化的环境 ,终将绝灭。但是已被发现的近 5 0种单性脊椎动物不仅没有因失去基因的重组和交换而绝灭 ,反而表现出强大的生命力。其有害突变积累和较长的生物演化历程之间的矛盾和在缺乏遗传重组情况下的进化机制是特别引人关注的重大生物学问题。简要论述了单性动物独特的基因组结构、存在历史及其进化途径 (突变、三倍化、异精雌核发育生殖方式和异精效应及生殖方式多样化 )。

环境因子对萼花臂尾轮虫种群动态的影响

应用单个体培养方法研究了藻类食物的种类和浓度以及培养温度对萼花臂尾轮虫种群动态的影响 .结果显示 ,藻类食物的种类和斜生栅藻浓度均仅对轮虫的幼体阶段历时和产卵量具有显著的影响 ;三类食物中蛋白核小球藻是轮虫种群增长的最适藻类食物 ;若以斜生栅藻为食物 ,轮虫种群增长的最适浓度为 6.0× 10 6cells/ml.轮虫各主要发育阶段的历时皆随着温度的升高而极显著地缩短 ,但温度对其产卵量无显著的影响 :30℃下该种轮虫种群的内禀增长率最大 .

Inhibitory plasticity balances excitation and inhibition in sensory pathways and memory networks

Cortical neurons receive balanced excitatory and inhibitory synaptic currents. Such a balance could be established and maintained in an experience-dependent manner by synaptic plasticity at inhibitory synapses. We show that this mechanism provides an explanation for the sparse firing patterns observed in response to natural stimuli and fits well with a recently observed interaction of excitatory and inhibitory receptive field plasticity. The introduction of inhibitory plasticity in suitable recurrent networks provides a homeostatic mechanism that leads to asynchronous irregular network states. Further, it can accommodate synaptic memories with activity patterns that become indiscernible from the background state but can be reactivated by external stimuli. Our results suggest an essential role of inhibitory plasticity in the formation and maintenance of functional cortical circuitry.

细菌性败血症引起鲫凝血障碍的研究

以嗜水气单胞菌感染体重为70g左右的鲫并检测了感染鱼和对照鱼的血液学及播散性血管内凝血判定指标等参数。结果表明细菌性败血症病鱼严重贫血，存在明显的凝血障碍，在疾病发展过程中存在播散性血管内凝血现象，这一现象导致了病鱼全身性出血，并在疾病的病理生理过程中起了重要的作用。

亚热带湖泊中一种剑水蚤──Mesocyclops notius Kiefer的形态及生态学研究(英文)

本文报道了对一亚热带湖泊中的Mesocyclopsnotius的形态及生态学研究。将从扁担塘采得的标本形态学特征与Kiefer和Velde从澳大利亚的标本的形态学特征进行了比较．在扁担塘，M.notius与2种温剑水蚤──ThermocyclopstaihokuensisHarada和T.brevifurcatusHarada为春季和夏季剑水蚤的优势种，而CyclopsvincinusvincinusVljanin为冬季的优势种。

微型生态系统中鲢、鳙下行影响的实验研究——2.营养物水平

鲢、鳙放养使微型生态系统的水柱氮、磷浓度和磷的分布发生了明显的变化。至实验结束时,各实验组的水柱颗粒磷、总磷和氨氮浓度都比对照组高,而正磷酸盐浓度和沉积物磷的量均低于对照组。这种变化以鳙单养系统为最大,其次是鲢、鳙混养系统,鲢单养系统的变化最小。微型生态系统中正磷酸盐浓度同浮游动、植物密度和初级生产力显著相关,氨氮浓度同所述变量之间的相关关系则多半与正磷酸盐相反。实验观测期间浮游植物密度与总磷浓度之间存在营养级联假说所预见的下行影响,实验结束时二者之间却有上行影响的趋向。根据实验观测结果认为,微型生态系统

武汉东湖桡足类的生态学演变

根据１９６２－１９６３，１９７４－１９７５，１９７９－１９９１年在武汉东湖进行的调查资料，考察了过去三十年内在东湖两个代表性采样站桡足类的种类组成及现存量的变化。结果表明：桡足类种类数由６０年代的１４种减少为９０年代的７种，Ｉ、Ⅱ站在种类组成的差别趋于消失。统计结果表明，东湖桡足类现存量以８０年代初、中期较高。但在水平分布格局上却发生了根本变化，由１９８７年前的Ｉ站现存量高于Ⅱ站，至１９８７年后Ⅱ站高于Ｉ站。本文还就影响东湖桡足类演变的生态因子进行了讨论。