Transportadores sólidos de oxigênio à base de níquel e cobre suportados em aluminatos para combustão do metano pela tecnologia de recirculação química

In recent years, solid carriers suitable oxygen have been developed for use in different chemical processes recirculation. The success of this technology is directly related to the chemical reactivity and the oxygen storage capacity of the carrier. Thus, research into the development of new materials that can be applied to the process becomes extremely important. Possible candidates are the carriers based on nickel and copper for presenting favorable thermodynamic properties. In this work, aluminates type MAl2O4 (M = Mg and Ca) and M0,9B0,1Al2O4 (B = Ni and Cu) that are used as supports were synthesized by combustion reactions assisted by microwave and calcined at 900°C/2h. Then, the carriers were impregnated with 10% (m/m) of nickel or copper, and subsequently calcined at 600°C/2h to obtain the solid oxygen carriers, which were characterized by X-ray diffraction (XRD) Microscopy scanning electron microscopy (SEM) and temperature programmed reduction (TPR). Reactions simulating the combustion process by chemical recirculation were performed by cycles reduction/oxidation, in order to evaluate the reactivity of carriers. XRD analysis revealed diffraction peaks of the spinel type structures. In the doped substrates were verified the presence of secondary phases, suggesting that all the metal was incorporated into the spinel structure. In solid oxygen carriers, the NiO and CuO phases were observed after impregnation of active phases on different media. The results of evaluations of chemical cycles reduction/oxidation revealed that TSO's impregnated with nickel in various media were more active and are potential candidates for use in the chemical recirculation technology

Pressão de sono e perfil acadêmico de estudante de medicina do 1º período da UFRN

Academic demands, new social context, new routines and decrease of the parental control, are factors that may influence the sleep pattern of freshman students at the University. Medical students from the Federal University of Rio Grande do Norte (UFRN) have a full-time course, subjects with high-level content, and, at the first semester, classes begin at 7 a.m. This group composed by young adults who still suffering with delayed sleep phase, common in adolescence, indicating that this class schedule can be inappropriate at this age. The reduction of nocturnal sleep during school days, and the attempt to recover sleep on free days – social jet lag (JLS), suggests that in the first semester, students suffer from high sleep pressure. High sleep pressure may reflect on cognitive tasks and performance. Therefore, the aim of this study was to investigate the relationship between sleep pressure and the academic profile of medical students from the first semester of UFRN, characterizing this population socio-demographically and investigating possible impacts on therestactivity rhytm and academic performance. A sample of 88 students, healthy men and women awswered the following questionnaires: Pittsburgh Sleep Quality (PSQI), Epworth Sleepiness Scale (ESS), Horne & Ostberg Chronotype (HO), Munich Chronotype (MCTQ) and “Health and Sleep” adapted. Actigraphy was used during 14 days to make actogramas and obtain non-parametric variables of the rest-activity rhythm and the grades of the morning schedule were used as academic performance. The JLS was used as a measure of sleep pressure. Statistics significance level was 95%. The population was sociodemographic homogeneous. Most students have healthy lifestyle, practice physical activity, use car to go to the university and take between 15 and 30 minutes for this route. Regarding CSV, most were classify as intermediate (38.6%) and evening (32%) chronotypes, needs to nap during the week, suffer daytime sleepiness and have poor sleep quality. 83% of the sample has at least 1h JLS, which led us to divide into two groups: Group <2h JLS (N = 44) and Group ≥ 2h JLS (N = 44). The groups have differences only in chronotype, showing that most evening individuals have more JLS, however, no differences were found in relation to sociodemographic aspect, rest-activity rhythm or academic performance. The homogeneity of the sample was limited to compare the groups, however, is alarming that students already present in the first half: JLG, poor sleep quality and excessive daytime sleepiness, which can be accentuated through the university years, with the emergence of night shifts and increased academic demand. Interventionsaddressingthe importance of good sleep habits and the change of the class start time are strategies aimed to improve student’s health.

Desempenho zootécnico dos camarões: Litopenaeus vannamei e Macrobrachium rosenbergii em tanques rede e aquicultura familiar na comunidade de Bebida-Velha, RN

The study aims to evaluate the performance and identify lesions of agonistic interactions of Macrobrachium rosenbergii in different densities cages (chapter 1); compare the growth performance of shrimp M. rosenbergii and Litopenaus vannamei cages (chatper 2); in addition the study aimed at identifying the knowledge and practices of a traditional community of farmers Bebida-Velha, in the city of Pureza / RN, practicing rural family and aquaculture, as well as tracing the community socioeconomic profile and evaluate the management that these farmers use in shrimp farming Macrobrachium rosenbergii (chapter 3). To perform the experiments (chapter 1 and 2) shrimp species L. vannamei and M. rosenbergii were weighed on a digital scale and transferred to cultures in cages. The cages had 1m³, with 5mm mesh between us and were closed on top with screen to avoid predators (birds, insects). The animals remained in adaptation for fifteen days before the start of data collection (each experiment). Both experiments lasted seventy days, totaling eighty-five days cultivation. During the cultures, animals were fed pelleted feed for shrimp at 10% of their biomass with 35% crude protein, offered in feed trays twice a day during the hours (7:00 am and 14:00 pm). The remnants in the tray were removed after 2h of permanence to calculate intake. To determine the performance parameters, some samples were taken every 10 days. The results of both experiments were analyzed using the STATISTIC 7.0 (2004). In Chapter 1 experiment were applied5 treatments were applied with 5 replications each: D5 - 5 animals/m2 ; D10 - 10 animals/m2 ; D15 - 15 animals/m2 ; D20 - 20 animals/m2 ; D25 - 25 animals/m2 . To this, were distributed 25 cages randomly in two masonry nurseries. The end of the experiment the lesions were verified and quantified. The chapter 2 experiment began when the shrimp reached the same age (eighty-four days) and was used the density of 25 shrimp / m2 with 4 repetitions. For the realization of chapter 3 were applied semi-structured interviews by direct approach of Bebida Velha of settlers practicing aquaculture activity, tilapia producers and community shrimp. Data were tabulated and analyzed according to the responses obtained by the participants. Therefore, the amount of damage increased with increasing stocking density. The density of 10 freshwater shrimp/m² showed the best conditions for a better performance in cages. It can be concluded that in cages, the cultivation of species of fresh water shrimp M. rosenbergii had better zootechnical indexes than the cultivation of marine shrimp species L. 9 vannamei. It was possible to verify that the activities of which the interviewees practice guarantee a good quality of life and income for them. We find that respondents have traditional and local knowledge, and also may be interested in the cultivation of the species M. rosenbergii.

Influência do jet lag social em marcadores circadianos de atividade - repouso e cardíaco em estudantes de medicina

Studies reveal that in recent decades a decrease in sleep duration has occurred. Social commitments, such as work and school are often not aligned to the "biological time" of individuals. Added to this, there is a reduced force of zeitgeber caused by less exposure to daylight and larger exposure to evenings. This causes a chronic sleep debt that is offset in a free days. Indeed, a restriction and extent of sleep called "social Jet lag" occurs weekly. Sleep deprivation has been associated to obesity, cancer, and cardiovascular risk. It is suggested that the autonomic nervous system is a pathway that connects sleep problems to cardiovascular diseases. However, beyond the evidence demonstrated by studies using models of acute and controlled sleep deprivation, studies are needed to investigate the effects of chronic sleep deprivation as it occurs in the social jet lag. The aim of this study was to investigate the influence of social jet lag in circadian rest-activity markers and heart function in medical students. It is a cross-sectional, observational study conducted in the Laboratory of Neurobiology and Biological Rhythmicity (LNRB) at the Department of Physiology UFRN. Participated in the survey medical students enrolled in the 1st semester of their course at UFRN. Instruments for data collection: Munich Chronotype Questionnaire, Morningness Eveningness Questionnaire of Horne and Östberg, Pittsburgh Sleep Quality Index, Epworth Sleepiness Scale, Actimeter; Heart rate monitor. Analysed were descriptive variables of sleep, nonparametric (IV60, IS60, L5 and M10) and cardiac indexes of time domain, frequency (LF, HF LF / HF) and nonlinear (SD1, SD2, SD1 / SD2). Descriptive, comparative and correlative statistical analysis was performed with SPSS software version 20. 41 students participated in the study, 48.8% (20) females and 51.2% (21) males, 19.63 ± 2.07 years. The social jet lag had an average of 02: 39h ± 00:55h, 82.9% (34) with social jet lag ≥ 1h and there was a negative correlation with the Munich chronotype score indicating greater sleep deprivation in subjects prone to eveningness. Poor sleep quality was detected in 90.2% (37) (X2 = 26.56, p <0.001) and 56.1% (23) excessive daytime sleepiness (X2 = 0.61, p = 0.435). Significant differences were observed in the values of LFnu, HFnu and LF / HF between the groups of social jet lag <2h and ≥ 2h and correlation of the social jet lag with LFnu (rs = 0.354, p = 0.023), HFnu (rs = - 0.354 , p = 0.023) and LF / HF (r = 0.355, p = 0.023). There was also a negative association between IV60 and indexes in the time domain and non-linear. It is suggested that chronic sleep deprivation may be associated with increased sympathetic activation promoting greater cardiovascular risk.

Síntese e caracterização de PSFC (Pr0,5Sr0,5Fe1-xCuxO3-δ, sendo x=0,2 e x=0,4) para aplicação como catodo de células a combustível de óxido sólido

The PSFC (Pr0.5Sr0.5Fe1-xCuxO3-δ) is a new mixed oxide perovskite and has been studied and evaluated the cathode materials for intermediate temperature solid oxide fuel cells (IT-SOFCs), mainly due to its good compatibility with the electrolyte (CGO) and its high ionic conductivity and electronic in intermediate temperature. In this work, PSFC powders with two different compositions (Pr0,5Sr0,5Fe0,8Cu0,2O3- PSFC5582 and Pr0,5Sr0,5Fe0,6Cu0,4O3-PSFC5564) were synthesized by the citrate method using a new route. The powders obtained were characterized by thermal analysis (Differential Scanning Calorimetry and Thermogravimetry), and the material calcined at 800, 900 and 1000 °C for 5h were analyzed by X-ray diffractometry (XRD), with the Rietveld refinement of the diffraction data and dilatometry. PSFC5582 composite films were obtained by screen printing of powder calcined at 1000 °C. The films were deposited on substrate ceria doped with gadolinia (CGO) and then sintered at 1050 °C for 2h. The electrochemical performance of the electrodes was evaluated by impedance spectroscopy and the interface electrode/electrolyte was observed by scanning electron microscopy (SEM). The specific resistance area (ASR) was 0.44 Ω.cm² at 800 °C, slightly lower than those reported in the literature for cathodes containing cobalt. The thermal expansion coefficients of both the PSFC compositions were obtained and varied between 13 and 15 x 10-6 °C-1 , in a temperature range of 200 to 650 °C, demonstrating the good thermal compatibility of cathodes with Ce0,9Gd0,1O1,95 electrolytes (CET = 12 x 10-6 °C).

Síntese e caracterizações estrutural e magnética das ferritas de cobalto-manganês (Co1-xMnxFe2O4 E Co1,2Fe1,8-xMnxO4)

The cobalt-manganese ferrites (Co1¡xMnxFe2O4 and Co1,2Fe1,8¡xMnxO4) has a mixed structure of spinel type and it has been regarded as one of candidates for petitive wide variety of applications in devices from ultrasonic generation and detection, sensors, transformers, as well as in medical industry. Ferrites cobalt-manganese nanostructured were produced via mechanical alloying with subsequent heat treatment and were characterized by X-ray diffraction, X-ray fluorescence, scanning electron microscopy and magnetization. Samples of Co1¡xMnxFe2O4 and Co1,2Fe1,8¡xMnxO4 were obtained from the precursor powders Fe3O4, Co3O4 and Mn3O4 which were stoichiometrically mixed and ground by 10h and heat treated at 900°C for 2h. The diffraction confirmed the formation of the pure nanocrystalline phases to series Co1,2Fe1,8¡xMnxO4 with an average diameter of about 94nm. It was found that the lattice parameter increases with the substitution of Fe3Å by Mn3Å. The x-ray fluorescence revealed that the portions of metals in samples were close to the nominal stoichiometric compositions. The microstructural features observed in micrographs showed that the particles formed show very different morphology and particle size. The magnetic hysteresis measurements performed at low temperature showed that the saturation magnetization and remanence increased as the concentration of manganese, while the coercive field decreased. The anisotropy constant (Ke f ), was estimated from the data adjustments the law of approaching saturation. It was found that the anisotropy decreases substantially with the substitution of Fe by Mn.

Estudo da influência da adição de níquel em alumina pela rota da metalurgia do pó

Ceramic materials alumina basis have been widely used in structural components, mainly because owning properties such as high hardness, chemical inertness and good wear resistance, however, the low toughness is a factor that compromises its use in many other applications, featuring the addition of nickel as a possible solution to this problem, in this context, this work aims to study the addition of nickel alumina using the route of powder metallurgy processing of the material. The percentage of nickel were added 2, 4 and 6 wt%; and each composition to high energy milling in a planetary mill was performed for 2, 4, 9 and 16h. Subsequently, the samples were compacted at 300 MPa and sintered in a vacuum oven at 1400⁰C for 2h. The samples were characterized as the physical and mechanical properties, observing, in general, an improvement in sinterability of the material with increasing grinding time and nickel content, and mixing with a decrease of porosity and increase of hardness, density values above 80% of theoretical were obtained. The milling time of 4 hours and addition of 2% nickel, particularly if achieved higher hardness (HV 1068.7 +/- 32.6) and density of about 99% theoretical density.

Estudo da influência da adição de níquel em alumina pela rota da metalurgia do pó

Ceramic materials alumina basis have been widely used in structural components, mainly because owning properties such as high hardness, chemical inertness and good wear resistance, however, the low toughness is a factor that compromises its use in many other applications, featuring the addition of nickel as a possible solution to this problem, in this context, this work aims to study the addition of nickel alumina using the route of powder metallurgy processing of the material. The percentage of nickel were added 2, 4 and 6 wt%; and each composition to high energy milling in a planetary mill was performed for 2, 4, 9 and 16h. Subsequently, the samples were compacted at 300 MPa and sintered in a vacuum oven at 1400⁰C for 2h. The samples were characterized as the physical and mechanical properties, observing, in general, an improvement in sinterability of the material with increasing grinding time and nickel content, and mixing with a decrease of porosity and increase of hardness, density values above 80% of theoretical were obtained. The milling time of 4 hours and addition of 2% nickel, particularly if achieved higher hardness (HV 1068.7 +/- 32.6) and density of about 99% theoretical density.

Il problema cosmologico del 7Li - considerazioni nucleari ed esperimento n_TOF

La nucleosintesi primordiale descrive le reazioni che hanno formato i primi elementi leggeri (H, 2H, 3He, 4He, 7Li) e ci da una previsione sull'andamento delle loro abbondanze primordiali in funzione del rapporto barioni-fotoni η, unico parametro libero della teoria BBN. Questo parametro è stato fissato dal momento in cui la sonda WMAP è stata lanciata in orbita; essa ha svolto misure importantissime sulla radiazione cosmica di fondo, fornendoci un valore accurato della densità barionica e quindi di η. Con questo nuovo dato sono state calcolate le abbondanze degli elementi leggeri ai tempi della nucleosintesi primordiale, tuttavia quella teorizzata per il 7Li non corrispondeva affatto a quella osservata nelle stelle dell'alone galattico, ma risultava essere dalle 2 alle 4 volte maggiore. Questa discrepanza costituisce il problema cosmologico del litio. Il problema può essere affrontato in diversi campi della fisica; il nostro scopo è quello di studiarlo dal punto di vista della fisica nucleare, analizzando le reazioni nucleari legate al 7Li. Il contributo principale alla produzione di 7Li proviene dal decadimento spontaneo del 7Be, quindi bisogna valutare il rate di reazione dei processi che producono o distruggono quest'ultimo nucleo; tale rate dipende dalla sezione d'urto della reazione. Un contributo fondamentale potrebbe essere dato dalle eventuali risonanze non ancora scoperte, cioè gli stati eccitati dei prodotti di reazione che si trovano ad energie non ancora studiate, in corrispondenza delle quali la sezione d'urto subisce un drastico aumento. Le due reazioni principali da considerare sono 7Be(n,p)7Li e 7Be(n,αlfa)4He; la prima perché contribuisce al 97% della distruzione del berillio, quindi una rivalutazione della sua sezione d'urto porterebbe ad un grande cambiamento nel valore dell'abbondanza di 7Be (e quindi di 7Li), la seconda poiché, anche se contribuisce solo al 2.5% della distruzione del berillio, possiede una incertezza enorme.

Degradação de paracetamol empregando tecnologia oxidativa avançada baseada em fotocatálise heterogênea usando irradiação artificial e solar

In this work, the oxidation and mineralization of paracetamol, based in an advanced oxidative process promoted by heterogeneous photocatalysis, was evaluated. The action of two photocatalysts (titanium dioxide, and a composite based on the association between titanium dioxide and zinc phthalocyanine dye) was studied. First of all, experiments in laboratory scale were performed using as radiation font a 400 W high pressure mercury lamp. The mineralization of paracetamol, promoted by both photocatalysts, was evaluated working with 4L of solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. To find the best experimental conditions, the influence of hydrogen peroxide concentration and pH was evaluated for the reactions. The best results for the reactions in laboratory scale was obtained using 33,00 mg L-1 of hydrogen peroxide in natural pH (6,80). Under these conditions, 100% oxidation was reached in just 40 minutes of reaction using TiO2 P25, while the mineralization was 78%. Using the composite, the mineralization was 63% in 2 hours of reaction and a oxidation of almost 100% was reached after 60 minutes. A CPC reactor (compound parabolic concentrator) was employed in the expanded work scale, using the sun as irradiation source. In this case the experiments were performed using 50 L of aqueous solution containing 10 mg L-1 of paracetamol and 100 mg L-1 of photocatalyst. The assays were done at pH 3,00 and natural pH (6,80). The used concentration of hydrogen peroxide was 33,00 mg L-1, adopted after laboratory scale studies. The reaction at pH 3,00 shows to be more advantageous, since under natural pH (6,80), the use of deionized water was necessary to prepare the solutions, probably because the deleterious action of carbonate ions, known hydroxyl radical scavengers. Using solar irradiation, the reaction mediated by the composite was more efficient when compared with the assays under laboratory scale since the composite presents the advantage of promoting a better use of visible radiation. Under these conditions, the mineralization increased from 40% to 56% under pH 3,00. At natural pH the oxidation occurred more slowly and the mineralization decreased from 56% to 50%. Thus, the use of pH 3,00 will be more interesting in real scale applications, even if it is necessary the pH correction before the discard of the treated effluent to the environment.

Assessment of anticancer properties of essential oils from aromatic plants of the sand dunes of peniche (portugal)

O cancro é um problema de saúde crescente no mundo e é a segunda causa de morte depois das doenças cardíacas. De acordo com a Agência Internacional de Investigação em Cancro (IARC) existem atualmente mais de 10 milhões de casos de cancro por ano no mundo. Os produtos naturais oferecem oportunidades de inovação na descoberta de novos fármacos. Neste sentido, os compostos naturais isolados a partir de plantas medicinais, como potenciais fontes de novas drogas anticancerígenas, têm tido um interesse crescente. Os Óleos Essenciais (OEs) são sintetizados pelas plantas e têm sido estudados pelas suas inúmeras atividades biológicas, incluindo anticancerígena, anti-inflamatória, antimicrobiana, antiviral, antioxidante e repelente de insetos. Este estudo tem como objetivos determinar a eficácia de OEs de seis espécies de plantas das dunas de Peniche (Portugal), como potenciais agentes terapêuticos anticancerígenos em linhas celulares de cancro da mama (MCF7) e do colo-rectal (RKO), assim como perceber o mecanismo de ação destes OEs. Neste estudo, partes aéreas de Artemisia campestris subsp. maritima, Crithmum maritimum, Eryngium maritimum, Juniperus turbinata subsp. turbinata, Otanthus maritimus e Seseli tortuosum foram colhidas na praia da Consolação, em Peniche (Portugal), e os seus OEs isolados através de hidrodestilação. A composição química dos OEs foi investigada por cromatografia gasosa (GC) e por cromatografia gasosa com espetrofotometria de massa (GC-MS) e os compostos maioritários foram descritos para cada óleo. Para avaliar a atividade anticancerígena nas linhas celulares MCF7 e RKO, o método MTS (3- (4, 5-dimethyl- 2 -thiazolyl) - 2, 5-dyphenyl-2H-tetrazolium bromide) foi usado e a viabilidade celular avaliada, através de diluições sucessivas, a concentrações iniciais de 5 μL/mL e 1 μL/mL, com diluição de 1:2 e 1:10, respetivamente, comparando com o controlo (DMSO). De todos os OEs testados, a atividade anticancerígena foi descrita, em ambas as linhas celulares, como observado pela diminuição da viabilidade/proliferação celular – exceto o OE Eryngium maritimum a uma concentração inicial de 5 μL/mL.Com o objetivo de avaliar o mecanismo biológico de ação dos OEs, foi realizado um western blot para marcadores relativos ao bloqueio do ciclo celular e apoptose (p53, p21 e caspase 3 clivada), para Seseli tortuosum e Otanthus maritimus. Foi observado um aumento do nível proteína p53 nas células tratadas com estes OEs, sugerindo a indução de stress celular nas células cancerígenas testadas. No entanto, não foi observada caspase 3 clivada, sugerindo que a apoptose não terá sido a causa para a diminuição da viabilidade/proliferação celular observada. Foi ainda observado o aumento da expressão da p21 com os OEs selecionados, sugerindo que o tratamento com OE está associado ao bloqueio do ciclo celular. Para validar estas observações, a análise realizada por FACS, depois do tratamento indica um possível bloqueio do ciclo celular na fase G1. Concluindo, a concentração inicial de 5 μL/mL revelou ser muito tóxica para as linhas celulares testadas. No entanto, a uma concentração final de 1 μL/mL foi demonstrada uma diminuição da viabilidade/proliferação celular para todos os OEs. No estudo preliminar do mecanismo de ação dos OEs, foi demonstrado, face à presença da p21, que os óleos de Seseli tortuosum e Otanthus maritimus atuam bloqueando o ciclo celular. Para comprovar estes resultados, o FACS realizado (apenas no OE de Seseli tortuosum) revelou que este bloqueio pode ocorrer, pelo aumento da percentagem de células observadas, na fase G1. Estes resultados demonstram o interesse destes OEs de Peniche na procura de novos agentes quimo preventivos contra a progressão do cancro da mama e colo-rectal.

Phytochemical-loaded mesoporous silica nanoparticles for nose-to-brain olfactory drug delivery

Central nervous system (CNS) drug delivery is often hampered due to the insidious nature of the blood-brain barrier (BBB). Nose-to-brain delivery via olfactory pathways have become a target of attention for drug delivery due to bypassing of the BBB. The antioxidant properties of phytochemicals make them promising as CNS active agents but possess poor water solubility and limited BBB penetration. The primary aim of this study was the development of mesoporous silica nanoparticles (MSNs) loaded with the poorly water-soluble phytochemicals curcumin and chrysin which could be utilised for nose-to-brain delivery. We formulated spherical MSNP using a templating approach resulting in ∼220nm particles with a high surface porosity. Curcumin and chrysin were successfully loaded into MSNP and confirmed through Fourier transformation infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and HPLC approaches with a loading of 11-14% for curcumin and chrysin. Release was pH dependant with curcumin demonstrating increased chemical stability at a lower pH (5.5) with a release of 53.2%±2.2% over 24h and 9.4±0.6% for chrysin. MSNP were demonstrated to be non-toxic to olfactory neuroblastoma cells OBGF400, with chrysin (100μM) demonstrating a decrease in cell viability to 58.2±8.5% and curcumin an IC50 of 33±0.18μM. Furthermore confocal microscopy demonstrated nanoparticles of <500nm were able to accumulate within cells with FITC-loaded MSNP showing membrane localised and cytoplasmic accumulation following a 2h incubation. MSNP are useful carriers for poorly soluble phytochemicals and provide a novel vehicle to target and deliver drugs into the CNS and bypass the BBB through olfactory drug delivery.

Enantioselective chemoenzymatic synthesis of 3-hydroxytetrahydrofurans

The research described in this thesis is concerned with the synthesis and stereoselective transformations of 4,5-dihydro-3(2H)-furanones and their 3-hydroxy derivatives. In Chapter 1, a review of synthetic routes to 3-hydroxytetrahydrofurans is presented. This incorporates the wide range of applications for these types of compounds. Preparative routes to and stereoselective transformations of the furanones investigated in this study are discussed in Chapter 2. The bulk of the work centers on stereoselective carbonyl group reductions to generate the 3-hydroxytetrahydrofuran derivatives in racemic form followed by kinetic resolution via lipase mediated esterification, resulting in enantioenriched 3-acetoxy and 3-hydroxytetrahydrofuran derivatives. In many cases, these processes proceed in a highly enantioselective manner. The influence of the lipase species and concentration of enzyme employed on the yield and stereochemical outcome of the reactions is examined in detail. Access to the complementary series of furanone and hydroxytetrahydrofuran derivatives by oxidation or reduction of the enantioenriched compounds was achieved through conventional synthetic methods. Chapter 2 also contains details of a novel synthetic route to a range of 2,3,5-trisubstituted furans from α-hydroxyenones and 4,5-dihydro-3(2H)-furanones. The mechanistic rationale for these transformations and the migratory aptitude of alkyl groups towards the formation of these furans is discussed in detail. Finally, Chapter 2 outlines the synthesis of a series of diarylcyclopentenones that were synthesised as part of our investigations. Chapter 3 contains a description of the synthetic procedures and biotransformations carried out together with key analytical and spectroscopic properties of the compounds studied and where appropriate, their analysis using chiral HPLC analysis.

Chemoenzymatic routes to enantiopure hydroxytetrahydrofurans: muscarine and its analogues

Muscarine was identified as an active principle of the poisonous mushroom Amanita muscaria over 170 years ago and has been identified as an agonist of acetylcholine. The synthesis of all stereoisomers of muscarine have been accomplished at this stage by chemical methods and the biological activity of these compounds tested. A number of synthetic routes to enantiomerically pure muscarine and its analogues have been published. In this work, we are focussed on the use of a novel biotransformation strategy to access these compounds. Asymmetric synthesis involves targeting a synthetic pathway leading to one enantiomer of a compound and biocatalysis is one strategy used in asymmetric synthesis. Chapter 1 consists of a review of the relevant literature pertaining to the synthesis and stereoselective transformations of 3-hydroxytetrahydrofuranss. A review of synthetic routes to these compounds is presented, with a particular focus on routes to the natural product muscarine and its analogues. Chapter 2 discusses the preparative routes to the 3-hydroxytetrahydrofurans via 3(2H)- furanones. Steps amongst which include Rh(II) mediate cyclisation and kinetic resolution via baker’s yeast mediated carbonyl reduction, resulting in enantioenriched 3- hydroxytetrahydrofuran derivatives. Finally, application of this methodology to the preparation of all four enantiomers of an analogue of desmethylmuscarine and the synthesis of epimuscarine is described. Chapter 3 consists of a detailed experimental section outlining the synthetic procedures employed.

Changements climatiques et écologiques dans le nord de l’Alaska au cours de la glaciation du Wisconsinien : le Yedoma de la rivière Itkillik

Le climat continental et froid de la Béringie lors de la glaciation du Wisconsinien a conduit à la formation d’une forme relique de pergélisol syngénétique nommé yedoma. Ces dépôts ont permis la préservation d’indicateurs environnementaux très diversifiés qui peuvent être employés pour reconstituer la dynamique climatique et écologique de la Béringie avant le dernier maximum glaciaire. À ce jour, peu d’études ont été réalisées au nord de la chaîne de montagnes Brooks (Alaska) et l’hétérogénéité écologique régionale de la Béringie Est lors de la glaciation du Wisonsinien reste mal définie. Ce mémoire porte sur une reconstitution paléoenvironnementale de plus de 39 ka du nord de l’Alaska réalisée à partir de sédiments provenant du Yedoma de la rivière Itkillik. Les objectifs sont (1) de reconstituer l’histoire de la végétation avec l’analyse pollinique; (2) de reconstituer les températures de juillet, le contraste de température saisonnier et l’ensoleillement de juillet avec la technique des analogues modernes et (3) de mettre les données biogéochimiques et glaciologiques du site en lien avec le climat reconstitué. L’étude montre que vers 35 ka BP (Interstade du Wisconsinien Moyen), des conditions climatiques semblables à l’actuel ont favorisé l’accumulation de tourbe riche en carbone organique. À partir de 29,7 ka BP, les températures de juillet reconstituées diminuent, alors que la continentalité du climat semble augmenter. Le contenu en glace des sédiments est plus alors plus faible et la pluie pollinique devient dominée par Poaceae, Artemisia et autres herbacés non graminoïdes. Ces indicateurs suggèrent des conditions environnementales plus xériques qu’aujourd’hui. Les anomalies isotopiques de 18O, 2H et l’excès de deutérium confirment un épisode d’avancée glaciaire (Wisconsinien Tardif). Après 17,9 ka BP (Tardiglaciaire), les températures de juillet et le contraste saisonnier augmentent. Les valeurs de contenu en carbone organique des sédiments sont plus élevées et la plus grande disponibilité en eau favorise l’établissement d’un couvert herbacé moderne dominé par les Cyperaceae.