PMMA/SAN共混体系的热膨胀系数和等温压缩系数测定

通过溶液共混制得不同组成的聚甲基丙烯酸甲酯 (PMMA)和苯乙烯 -丙烯腈共聚物 (SAN,其中AN的含量约为 30 % (质量 ) )的共混物。利用压力 -体积 -温度 (p VT)膨胀仪对 PMMA、SAN纯组分样品及各共混物分别进行了测量 ,得到了它们的比容 Vsp随温度 T和压力 p变化的关系 (p VT数据 ) ,计算出它们的热膨胀系数 α随温度变化的关系以及等温压缩系数 β随压力变化的关系。在此基础上 ,拟合出共混物的 α和 β分别随组成变化的关系式。此外 ,应用 Tait方程对所有样品的 p VT数据进行了拟合

新型选择氧化催化剂合成、表征

本文采用"模板剂—离子交换"技术,合成了一系列含双过渡金属离子的介孔分子筛,并用一氧化碳氧化作为探针反应表征了这类催化剂.

Synthesis, characterization and crystal structure of a charge transfer salt based on 1.3-cyclopentadiene tetrabutylammoniumdodecamolybdosilicoate

A charge transfer salt, (Bu4N)(4) (C5H6)[(HSiMo11MoO40)-Mo-VI-O-V] has been photochemically synthesized from (Bu4N)(4)SiMo12O40 and 1.3-cyclopentadiene and Characterized, by elemental analysis, IR spectra, solid diffusion reflectance electronic spectra, CV and ESR. The X-ray crystal structure revealed that the title complex crystal data are as follows: triclinic, space group P (1) over bar, a = 14.347(3), b = 14.423(3), c = 27.158(5) Angstrom, alpha = 96.90(3), beta = 104.18(3), gamma = 98.20(3)degrees, V = 5322(2) Angstrom (3), Z = 2, M-r = 2855. 30, D-c = 1.782g.cm(-3), F(000) = 2860, R = 0.0719, wR = 0.198. The title compound is composed of 1.3-cyclopentadiene, four tetrabutylammonium and [(SiMo11MoO40)-Mo-VI-O-V](4-) anion.

Synthesis and crystal structure of a novel compound: [H3PMo12O40][CO(NH2)(2)](3)center dot-5H(2)O

The title compound, [H3PMo12O40][CO(NH2)(2)](3). 5H(2)O, was synthesized and characterized by IR, C-13 NMR and X-ray diffraction. This is the first example of a urea-heteropoly acid species. Crystal data: monoclinic, C2/c, a = 17.790(4) Angstrom, b = 17.158(3) Angstrom, e = 25.512(5) Angstrom, beta = 100.65(3)degrees, V = 8514(3) Angstrom (3), Z = 6, R-1 = 0.0437, wR2 = 0. 1092. In the unit cell, the urea molecules occupy cavities in the polyoxometalate lattice ordered along b-axis. Water molecules occupy the space left by polyoxometalates, and urea. Polyoxometalate O atoms, the N atoms of urea and O atoms of water molecules are involved in hydrogen bonding. (C) 2001 Elsevier Science B.V. All rights reserved.

Studies on the transport of lanthanides ions through the membrane of human erythrocyte in vitro by ICP-MS

A method was developed for the determination of lanthanum in the cytoplasm of human erythrocytes after they were incubated in lanthanum nitrate or citrate solutions. The lanthanum concentration in the cytoplasm of incubated erythrocytes is much higher than that in normal erythrocytes. It is suggested lanthanum can transport through the membrane of erythrocyte in vitro. Solutions containing chelator are unsuitable to be washing buffer in the investigation.

Surface-renewable cobalt(II) hexacyanoferrate-modified graphite organosilicate electrode and its electrocatalytic oxidation of thiosulfate

Cobalt(II) hexacyanoferrate (CoHCF) was deposited on graphite powder by an in situ chemical deposition procedure and then dispersed into methyltrimethoxysilane-derived gels to prepare a surface-renewable CoHCF-modified electrode. The electrochemical behavior of the modified electrode in different supporting electrolyte solutions was characterized by cyclic voltammetry. In addition, square-wave voltammetry was employed to investigate the pNa-dependent electrochemical behavior of the electrode. The CoHCF-modified electrode showed a high electrocatalytic activity toward thiosulfate oxidation and could thus be used as an amperometric thiosulfate sensor.

MH-Ni电池新型低温负极材料研究

常规方法合成的非AB_5型镍-稀土金属间化合物不是单相化合物,都是多相混合物,而作为高容量的MH-Ni电池负极材料,多相混合物是有益的.对非 AB_5型的镍-稀土金属间化合物作为MH-Ni电池负极进行了电化学性能研究,结果表明:室温下最大放电容量为298mAh/g,经46次循环,容量保持基本不变;在-25~0C以下至-40~0C,其放电容量远高于AB_5型的合金.虽然负极的放电容量都是随温度降低和放电电流的增大而降低,但即使在 -40~0C,I_c=145 mA/g的高电流下,非AB_5型镍-稀土金属间化合物的放电容量仍达到158 mAh/g,而AB_5型的放电容量只有8.8mAh/g.提出合成低温负极材料的3条经验原则.

An unusual electrochemically induced demetalation of iron-substituted Keggin-type undecatungstozincate ZnW11FeIII(H2O)O-39(7-)

Firstly reported for Fe-containing transition metal substituted polyoxometalates was an unusual Fe-centered demetalation process induced by the reduction of ZnW11FeIII to ZnW11FeII which resulted in a new couple of Fe-relating redox waves at positive potentials. (C) 1999 Elsevier Science S.A. All rights reserved.

Isothermal and non-isothermal crystallization kinetics of syndiotactic polypropelene

Isothermal and non-isothermal crystallization kinetics of a syndiotactic polypropylene(sPP) sample synthesized by new metallocene catalyst at different annealing temperatures and different cooling rates have been investigated by using differential scanning calorimetry(DSC) and density analysis. The equilibrium melting temperature( T-m(0)) is 158 degrees C by Hoffman-Weeks method. The equilibrium heat of fusion(Delta H-m(0)) is 88J/g in terms of the density analysis and DSC methods. The lateral and end surface free energies derived from the Lauritzen-Hoffman spherulitic growth rate equation are sigma = 5.2erg/cm(2) and sigma(e) = 69erg/cm(2), respectively. The work of chain folding is determined to be q = 33.75kJ/mol. Modified Avrami equation and Ozawa equation can be used to describe the non-isothermal crystallization behavior. And a new and convenient approach by combining the Avrami equation and Ozawa equation in a same crystallinity is used to describe the non-isothermal behavior as well. The crystallization activation energies are evaluated to be 73.7kJ/mol and 73.1kJ/mol for isothermal crystallization and non-isothermal crystallization, respectively. The Avrami exponent n is 1.5 similar to 1.6 for isothermal crystallization procedure, while the Avrami exponent n,is 2.5 similar to 3.5 for non-isothermal crystallization procedure. This indicated the difference of nucleation and growth between the two procedures.

茂金属间规立构聚丙烯结晶动力学研究

用ＤＳＣ和密度法对茂金属间规立构聚丙烯(sPP)样品进行了等温和非等温结晶动力学研究．测得平衡熔点T0m为158℃，平衡熔融热焓ΔH0m为3.7kJ/mol，侧表面自由能σ＝5.2erg/cm2，折叠链表面自由能σe＝69erg/cm2，链堆砌功ｑ＝33.75kJ/mol．对非等温结晶过程研究表明，由熔体结晶的ｓＰＰ具有非均相成核，三维球状生长机理．成核与生长活化能ΔE＝73.1kJ/mol

Photophysical properties of some binary and ternary complexes of rare earth ions with aminobenzoic acids and 1,10-phenanthroline

Photophysical properties (e.g. luminescence and energy transfer) of binary and ternary complexes of Gd3+, Eu3+, and Tb3+ with aminobenzoic acids and 1,10-phenanthroline were studied in connection with their spectroscopic characterization. Intramolecular energy transfer between center ions and ligands as well as between ligands is discussed in detail.

取代硫酸、氢氟酸等液体酸催化剂的途径

高效固体酸催化剂无论对现有工业生产，还是从环保考虑，都是十分重要的。特别是对那些使用液体酸诸如Ｈ２ＳＯ４、ＨＦ和ＡｌＣｌ３等为催化剂的液相酸工艺。近年来考虑到均相和多相酸催化反应中起决定作用的酸位（中心）之间的类似性，根据近代均相酸催化理论，通过对不同酸位（Ｌ酸、Ｂ酸、超强酸）本质的分析，对强酸催化剂提出了一个统一的酸结构模型。以此为依据，可对一些强酸催化剂进行剪裁。

K+ sensors based on supported alkanethiol/phospholipid bilayers

A novel kind of K+ sensor with valinomycin-incorporated bilayers supported on a gold electrode consisting of self-assembled alkanethiol monolayers (SAMs) and a lipid monolayer has been fabricated successfully. The lipid monolayer is deposited on the alkylated surface of the first alkanethiol monolayer through three different methods, such as the Langmuir-Blodgett (LB) technique, painted method and painted-frozen method. The response of K + sensors produced by a painted or painted-frozen lipid monolayer on an alkanethiol alkylated gold electrode is larger than that by the LB method, which is due to the difference in fluidity of the three kinds of bilayers. Selectivity coefficients KK+, Na+, KK+, Li+, KK+, Ca2+ and KK+, Mg2+ are 10(-4), 10(-4), 2 x 10(-5) and 3 x 10(-5) respectively, and there is no obvious difference among different fabricating methods. A linear response toward the potassium ion was found in the range from 10(-1) M to 10(-5) M with the detection limit of 10(-6) M. The sensor has a slope of 60 mV per decade. Meanwhile, the longevity of the sensor was improved obviously for at least two months at about -10 degrees C. The higher stability shows the possibility to fabricate a practical biosensor.

含二羟基二苯酮系列热致液晶共聚酯的合成与表征──Ⅱ．含4，4＇－二羟基二苯酮，对苯二甲酸，对羟基苯甲酸，间苯二酚的共聚酯

采用直接熔融缩聚及固相聚合方法由４，４’－二羟基二苯酮（ＢＨＰ），对苯二甲酸（ＴＰ），对羟基苯甲酸（ＰＨＢＡ），间苯二酚（ＲＥＳ）成功地合成了四元共聚酯高分子，该聚酯的组成结构及性质由偏光显微镜、广角Ｘ－射线衍射、ＤＳＣ等手段进行表征，结果表明共聚酯具有向列型液晶特征．

Synthesis and properties of block copolymers of poly(ether sulphone)s with liquid crystalline polyester units

Block copolymers of poly(ethersulphone) (PES) oligomers with liquid crystalline polyester units were synthesized by the reaction of dihydroxy-terminated poly(ether sulphone) oligomers (number-average molecular weights: 704, 1,158 and 2570) and terephthaloyl bis(4-oxybenzoyl chloride), and their properties were investigated. The results indicated that the copolymer with PES segments of molecular weight of 704 possessed birefringent features when annealed at 360 degrees C, while the copolymer with PES segments of molecular weight of 2,570 became isotropic. Also, the block copolymers had a better chemical resistance and high-temperature stability than PES.