Relationships of Manganese Minerals in the Butte District

The use of manganese in the steel industry as a deoxidizing and desulfidizing agent makes it a necessity in modern industry, while the various alloy steels using manganese for the quality of toughness are also indispensable. Manganese is also used in the manufacture of such various articles as battery cells, paints and glass.

Pegmatites in Southwestern Montana

Little has been written on pegmatites in Montana except in conjunction with reports on mining districts. This subject was chosen as a senior thesis to see what facts could be ascertained re­garding pegmatites alone, and an attempt has been made by the writer to assemble all written material on pegmatites in southwestern Montana, and to study specimens from those that could be reached or from which specimens were available.

A Study of the Concentration of a Low-Grade Manganese Ore from the Ennis District

The purpose of the investigation was to determine the most effective means of concentrating the manganese in the ore. The study was that of identification of the minerals present. This showed the presence of oxides of manganese and iron, and carbonates of calcium and manganese. Methods of investigation were planned to determined whether the ore could be concentrated effectively by gravity concentration methods. ­

The Electroformation of Lithium-Lead Alloys from Molten Electrolytes

An attempt was made to make lead-lithium alloys by electrodeposition of lithium using a molten bath and a molten lead cathode.The variables taken into consideration were: composition of the melt, temperature of the melt, and current density. The purpose of changing these factors was to determine what effect each had on the current efficiency.

An Experimental Investigation of the Age Hardening of Copper with Manganese Silicide

The subject of the thesis was based upon the theory of precipitation or age hardening of the copper by the compound formed by the Manganese and silicon present in the ternary Cu-Mn-Si alloy. The effect of the heat treat­ment to such an alloy was to be studied and the best aging time and temperature was to be determined.

Oil and Gas Production Methods in Montana

Montana's oil and gas industries aggregate a gross income of over 12,000,000 annually to the state. Oil and gas fields have been thoroughly discussed in liter­ature as to geology, location, production and future possibilities. The specific object of this report has been to compile a comprehensive study of the production methods as they occur.

Measurements of the Magnetic Permeabilities of the Iron-Manganese Alloy System Prepared by the Methods of Powder Metallurgy

Powder metallurgy is a branch of metallurgy which produces metallic compacts in their final forms by means of pressure and heat-treatment from the pow­ders. The products of powder metallurgy are being used in our daily lives quite often. For example, the tungsten wires in the electric bulbs to the silver-tin fillings of our teeth.

The Extraction of Chromate Salts from Montana Chromite

In this thesis I have tried to determine the suit­able temperature, time and the amount of soda ash and lime needed for the calcining process. The leaching and purification tests were studied experimentally. The earlier process for making chromate from chromite was not the same as is used today. There­fore I have found it useful to put into this thesis the newest method for making chromate salts and their important uses.

Some Effects of the Addition of Tellurium to Lead Alloys

From the standpoint of its practical useful­ness, the most important characteristics of metallic lead are its cheapness, resistance to corrosion, plas­ticity, high specific gravity, low melting point, and its ability to form alloys in which some properties are modified by the addition of other elements, while other properties remain the same.

The Theory of Alloy Deposition and The Effect of a Rotating Cathode Upon Such Deposition, with Special Attention to the Possibility of Depositing Sterling Silver

In the past few years a great deal of atten­tion has been given to the electrodeposition of alloys. For the main part, this investigation has been of scien­tific interest only; but in a few instances, such work has attained commercial importance.

Some Chromite Deposits in Madison County, Montana

Chromite occurs in Madison County, Montana, in two areas, one three miles southwest of Silver Star, the other five miles southeast of Sheridan. The ore bodies are small, lenticular masses surrounded by metamorphosed sedimentary rocks of the pre-Cambrian Cherry Creek series. The ore was deposited from the hydrothermal solutions which serpentinized the surrounding metamorphic host rocks.

Basic Information in the Granitic Rocks of the Boulder Batholith

Dark fine grained basic masses of rock are found in nearly every part of the Boulder Batholith, these commonly being referred to as inclusions, segregations, autoliths, and various other names. The origin, distribution, and composition of the dark inclusions form the basis for this report.

The Electrowinning of Manganese from Rhodochrosite

Manganese is commonly known to be a metal of great strategic importance. It is essential in the production of all steels, first as a scavenger to remove oxygen and sulfur, and second as an alloying element in wear-resis­tant steels.

Stratigraphy and Paleontology of the Eagle Formation in Montana and Adjacent Areas

A conspicuous two hundred and fifty foot sandstone of central Montana, known as the Eagle Formation, constitutes part of the some five thousand feet of Cretaceous sediments in the state. It stands out in steep cliffs which stretch for many miles in the outcrop area from Wyoming to Canada.

A Study of a Carbonaceous Gold Ore

The presence of graphite in the ore of the Missouri-McKee Mine has made its treatment by the methods now used quite unsatisfactory. The study was undertaken to de­velop a new flow sheet which would give a high recovery and yet be economical enough to handle low grade material.