994 resultados para íons metálicos


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Esta dissertação procura analisar, do ponto de vista do consumo de alguns energéticos e do desempenho da atividade de gêneros industriais, o comportamento e a evolução do processo recessivo da economia brasileira, a partir de 1974.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O conhecimento da física de semicondutores foi usado para desenvolver e otimizar um sensor ótico de silício capaz de determinar com precisão a posição bidimensional de incidência de um feixe de luz em sua superfície. O sensor usa o efeito de fototensão lateral para gerar um sinal elétrico de saída que é função da posição de incidência da luz. Tecnologia planar do silício foi usada na fabricação do dispositivo, incluindo implantação iônica, difusão, fotolitografia, deposição de filmes metálicos e crescimento de dielétricos. A caracterização elétrica do sensor inclui medidas estáticas, com a distribuição de portadores em regime estacionário, medidas dinâmicas, onde é analisado o transiente do sinal elétrico e medidas espectroscópicas para analisar a resposta do sensor em função do comprimento de onda da luz incidente. Simulações dos processos de fabricação, parâmetros dos passos tecnológicos, distribuição dos portadores e do potencial elétrico bidimensional no sensor foram usadas para a otimização das características do sensor.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A avaliação de risco sísmico, fundamental para as decisões sobre as estruturas de obras de engenharia e mitigação de perdas, envolve fundamentalmente a análise de ameaça sísmica. Calcular a ameaça sísmica é o mesmo que calcular a probabilidade de que certo nível de determinada medida de intensidade em certo local durante um certo tempo seja excedido. Dependendo da complexidade da atividade geológica essas estimativas podem ser bas- tante sofisticadas. Em locais com baixa sismicidade, como é o caso do Brasil, o pouco tempo (geológico) de observação e a pouca quantidade de informação são fontes de muitas incer- tezas e dificuldade de análise pelos métodos mais clássicos e conhecidos que geralmente consideram, através de opiniões de especialistas, determinadas zonas sísmicas. Serão discutidas algumas técnicas de suavização e seus fundamentos como métodos al- ternativos ao zoneamento, em seguida se exemplifica suas aplicações no caso brasileiro.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Este modelo é parte de um conjunto de modelos 3D produzidos pela equipe de audiovisual da SEaD/UFSCar para o jogo de realidade virtual “O Laboratório de Química”.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nesta dissertação, apresenta-se o trabalho realizado no decorrer do segundo ano do Mestrado em Bioquímica Aplicada. Prepararam-se nanopartículas metálicas através da redução química de sais metálicos em solução. Obtiveram-se soluções coloidais monometálicas de Au, Ag e FeOx e bimetálicas de Au/Ag, Ag/Au, FeOx/Au e FeOx/Ag seguindo ou adaptando métodos publicados na literatura. Numa primeira fase foram sintetizadas nanopartículas monometálicas de prata e ouro utilizando-se β-D-glucose, borohidreto de sódio e β-ciclodextrina como agente redutor dos iões metálicos. Seguidamente, por co-redução de uma mistura de iões prepararam-se ligas de nanopartículas de prata e ouro e por redução sucessiva de Ag e Au sintetizaram-se nanopartículas com uma estrutura núcleo-concha. As nanopartículas de FeOx foram preparadas por co-precipitação de Fe (III) e Fe (II). O revestimento com ouro foi conseguido através da redução com citrato de sódio e para a deposição de prata utilizou-se o ácido ascórbico. As soluções coloidais preparadas foram caracterizadas através de estudos de espetroscopia do UV-vis, tendo sido registados os máximos de absorvância característicos do ouro e da prata e os desvios esperados para o caso das nanopartículas núcleo-concha. As análises por dispersão dinâmica de luz permitiram auferir o tamanho das nanopartículas, eventual aglomeração e, portanto, permitiram a apreciação da estabilidade dos coloides. Com o intuito de confirmar a formação de estruturas em camada núcleo-concha foi feita a caracterização das amostras por microscopia eletrónica de transmissão e espetroscopia de raios-X de energia dispersiva. Alguns dos espetros obtidos confirmam o sucesso na preparação de uma estrutura em multicamada. Finalmente, demonstrou-se a biocompatibilidade de algumas amostras preparadas através da realização de estudos de citotoxicidade na linha celular fibroblástica NIH 3T3.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O principal objectivo deste trabalho é fornecer um panorama geral sobre a metodologia a adoptar na reabilitação de pontes metálicas, em particular no que toca à avaliação de danos e reparação, e focar a importância destas obras de arte enquanto legado histórico. Neste sentido, primeiro é apresentada a evolução histórica das pontes metálicas, no mundo e em Portugal, particularmente ao nível de materiais e soluções estruturais. Em seguida, é apresentada uma síntese sobre os principais processos de deterioração e as metodologias a aplicar na reabilitação de pontes metálicas, incluindo a avaliação do estado de conservação e a reparação e protecção dos elementos metálicos. O capítulo da avaliação contém uma abordagem geral à inspecção visual, assim como aos métodos de ensaio não destrutivos e destrutivos que podem ser aplicados na avaliação do estado de conservação. O capítulo da reparação descreve os vários métodos de reparação, aspectos críticos da sua aplicação e campo de aplicação. No último capítulo, sintetizam-se os aspectos mais relevantes na protecção de elementos metálicos, fornecendo informação sobre os sistemas mais utilizados e indicações a ter em conta na sua selecção.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

ALVES, Ana paula Melo. Vermiculitas tratadas quimicamente na obtenção de sólidos microporosos como precursores para híbridos inorgânico-orgânicos com aplicações adsortivas. 2009. 124 f. Tese (Doutorado em Quimica) - Centro de Ciências Exatas e da Natureza, Universidade Federal da Paraíba, João Pessoa, PB, 2009.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

MELO, D. M. A. et al. Synthesis and charactezarion of lanthanum and yttrium doped Fe2O3 pigments. Cerâmica, São Paulo, v. 53, p. 79-82, 2007.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The theoretical recital of the present study it is initiated of the evidence that the work occupies an important space in the man s life in way that the majority of the people works and passes great part of its time inside organizati ons. However, it is verified that the relation between man and work is becoming increasingly disagreement a time that the employees had started to complain work s routines, stress, not use all their potential and inadequate work s conditions. It can be observed by the way of Dejours (1994) studies. Thus, as contribution for the quality of work life s (QWL) studies the research developed here objectified to characterize the public employees quality of work life at EMATER -RN taking as reference an instrumen t of research synthesized from the typical academic literature of the subject. The synthesis of an ampler instrument is a necessity not taken care to the literature that treats on the subject but already perceived by some studies like Moraes et al (1990); Rodrigues (1989); Siqueira & Coleta (1989); Moraes et al (1992); Carvalho & Souza (2003); El -Aouar & Souza (2003) and Mourão, Kilimnick & Fernandes (2005); Adorno, Marques & Borges (2005) amongst others. These studies point out weak points of the existing models in the QWL s literature, as well as they recommend the elaboration of a model more flexible, that contemplates Brazilian cultural characteristics, and that contemplates the entire variable studied in the main existing models. For reach this objectiv e the adopted methodology was characterized as a case study with collected data in qualitative and quantitative way. Questionnaires and comments had been used as sources of evidences. These evidences had been tabulated through of statistical package SPSS ( Statistical Package for Social Science), in which the main technique of multivariate analysis used were the factorial analysis. As for the gotten results, it was verified the grouping of the quality of work life s indicators in 11 factors which are: Work s execution, Individual accomplishment, Work s equity, Relation individual and organization, Work s organization, Adequacy of the remuneration, Relation between head and subordinate, Effectiveness of the communication and the learning, Relation between work and personal life, Participation and Effectiveness of the work processes. Whatever to the characterization of the EMATER -RN s quality of work life it was clearly that to the measure that the satisfaction s evaluation with the QWL in the organization walks to intrinsic factors for extrinsic factors this level of satisfaction goes diminishing what points to the importance to improve these extrinsic factors in the institution. In summary it is possible to conclude that the organization studied has offered a significant set of referring variable to the quality of work life of the individual

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Four different sponge species were screened using Ouchterlony agarose gel and immunodiffusion tests to identify cross-reactivity with the polyclonal antibody IgG anti-deglicosilated CvL, a lectin from Cliona varians. Crude extract from the sponge Cinachyrella apion showed cross-reactivity and also a strong haemmaglutinating activity towards human erythrocytes of all ABO groups. Thus, it was submitted to acetone fractionation, IgG anti-deglicosilated CvL Sepharose affinity chromatography, and Fast Protein Liquid Chromatography (FPLC-AKTA) gel filtration on a Superose 6 10 300 column to purify a novel lectin. C. apion lectin (CaL) agglutinated all types of human erythrocytes with preference for papainized type A and O erythrocytes. The haemagglutinating activity is independent of Ca2+, Mg2+ and Mn2+ ions, and it was strongly inhibited by the disaccharide D-lactose, up to a minimum concentration of 6.25 mM. CaL molecular mass determined by FPLC-AKTA gel filtration on a Superose 12 10 300 column and SDS gel electrophoresis was approximately 124 kDa, consisting of eight subunits of 15.5 kDa, assembled by hydrophobic interactions. The lectin was relatively heat- and pH-stable. Leishmania chagasi romastigotes were agglutinated by CaL, indicating that lactose receptors could be presented in this parasite stage. These findings are indicative of the physiological defense roles of CaL and its possible use in the antibiosis of pathogenic protozoa

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A β-D-N-acetilglucosaminidase extracted and partially isolated from crustacean Artemia franciscana by ammonium sulfate precipitation and filtration gel chromatography Bio Gel A 1.5m. the enzyme was immobilized on ferromagnetic Dacron yielding a insoluble active derivative with 5.0 units/mg protein and 10.35% of the soluble enzyme activity. β-D-N-acetilglucosaminidase-ferromagnetic Dacron was easily removed from the reaction mixture by a magnetic field, it was reused for ten times without loss in its activity. The ferromagnetic Dacron was better activated at pH 5.0. The particles visualized at scanning electron microscope (SEM) had presented different sizes, varying between 721nm and 100µm. Infra red confirmed immobilization on support, as showed by primary amino peaks at 1640 and 1560 cm-1 . The immobilize enzyme presented Km of 2.32 ± 0.48 mM and optimum temperature of 50°C. Bought presented the same thermal stable of the soluble enzyme and larger enzymatic activity at pH 5.5. β-D-N-acetilglucosaminidase-Dacron ferromagnético showed sensible for some íons as the silver (AgNO3), with loss of activity. The β-D-N acetilglucosaminidase activity for mercury chloride (HgCl2), whom is one of the most toxic substance joined in nature, it was presented activity already diminished at 0,01mM and lost total activity at 4mM, indicating sensitivity for this type of metal. β-D-N-acetilglucosaminidase-ferromagnetic Dacron showed degradative capacity on heparan sulfate, the enzyme still demonstrated degradative capacity on heparan sulphate, suggesting a possible application to produce fractions of this glycosaminoglycan

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The corn cob is an agricultural by-product still little used, this in part due to the low knowledge of the biotechnological potential of their molecules. Xylan from corn cobs (XSM) is a polysaccharide present in greater quantity in the structure of plant and its biotechnology potential is little known. This study aimed to the extraction, chemical characterization and evaluation of biological activities of xylan from corn cobs. To this end, corncobs were cleaned, cut, dried and crushed, resulting in flour. This was subjected to a methodology that combines the use of alkaline conditions with waves of ultrasound. After methanol precipitation, centrifugation and drying was obtained a yield of 40% (g/g flour). Chemical analysis indicated a high percentage of polysaccharides in the sample (60%) and low contamination by protein (0.4%) and phenolic compounds (> 0.01%). Analysis of monosaccharide composition indicated the presence of xylose:glucose:arabinose:galactose:mannose:glucuronic acid in a molar ratio 50:20:15:10:2.5:2.5. The presence of xylan in the sample was confirmed by nuclear magnetic resonance (¹H and ¹³C) and infrared spectroscopy (IR). Tests were conducted to evaluate the antioxidant potential of XSM. This showed a total antioxidant capacity of 48.45 EAA/g sample. However, did not show scavenging activity of superoxide and hydroxyl radical and also reducing power. But, showing a high capacity chelating iron ions with 70% with about 2 mg/mL. The ability to XSM to influence cell proliferation in culture was also evaluated. This polymer did not influence the proliferation of normal fibroblast cells (3T3), however, decreased the rate of proliferation of tumor cells (HeLa) in a dose-dependent, reaching an inhibition of about 50% with a concentration around 2 mg/mL. Analyzing proteins related to cell death, by immunoblotting, XSM increases the amount of Bax, Bcl-2 decrease, increase cytochrome c and AIF, and reduce pro-caspase-3, indicating the induction of cell death induced apoptosis dependent and independent of caspase. XSM did not show anticoagulant activity in the PT test. However, the test of activated partial thromboplastin time (aPTT), XSM increased clotting time at about 5 times with 600 μg of sample compared with the negative control. The presence of sulfate on the XSM was discarded by agarose gel electrophoresis and IR. After carboxyl-reduction of XSM the anticoagulant activity decreased dramatically. The data of this study demonstrate that XSM has potential as antioxidant, antiproliferative and anticoagulant compound. Future studies to characterize these activities of XSM will help to increase knowledge about this molecule extracted from corn and allow their use in functional foods, pharmaceuticals and chemical industries.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The coast of Rio Grande do Norte has more than 100 species of seaweed, mostly unexplored regarding their pharmacological potential. The sulfated polysaccharides (PS) are by far the more seaweed compounds studied, these present a range of biological properties, such as anticoagulant activity, anti-inflammatory, antitumor and antioxidant properties. In this study, we extract sulfated polysaccharide rich-extracts of eleven algae from the coast of Rio Grande do Norte (Dictyota cervicornis; Dictiopterys delicatula; Dictyota menstruallis; Dictyota mertensis; Sargassum filipendula; Spatoglossum schröederi; Gracilaria caudata; Caulerpa cupresoides; Caulerpa prolifera; Caulerpa sertularioides e Codim isthmocladum), and these were evaluated for the potential anticoagulant, antioxidant and antiproliferative. All polysaccharide extracts showed activity for anticoagulant, antioxidant and/or antiproliferative activity, especially D. delicatula and S. filipendula, which showed the most prominent pharmacological potential, thereby being chosen to have their sulfated polysaccharides extracted. By fractionating method were obtained six fractions rich in sulfated polysaccharides to the algae D. delicatula (DD-0,5V, DD-0, 7V, DD-1,0v, DD-1,3v, DD-1,5v and DD-2,0) and five fractions to the alga S. filipendula (SF-0,5V, SF-0,7V, SF-1,0v, SF-1,5v and SF-2,0v). For the anticoagulant assay only the fractions of D. delicatula showed activity, with emphasis on DD-1, 5v that presented the most prominent activity, with APTT ratio similar to clexane® at 0.1 mg/mL. When evaluated the antioxidant potential, all fractions showed potential in all tests (total antioxidant capacity, hydroxyl and superoxide radicals scavenging, ferrous chelation and reducing power), however, the ability to chelate iron ions appears as the main mechanism antioxidant of sulfated polysaccharides from seaweed. In antiproliferative assay, all heterofucanas showed dose-dependent activity for the inhibition of cell proliferation of HeLa, however, with the exception of SF-0,7V, SF- 1,0v and SF-1,5v, all fractions showed antiproliferative activity against MC3T3, a normal cell line. The heterofucana SF-1,5V had its antiproliferative mechanism of action evaluated. This heterofucan induces apoptosis in HeLa cells by a pathway caspase independent, promoting the release of apoptosis Inducing Factor (AIF) in the cytosol, which in turn induces chromatin condensation and DNA fragmentation into 50Kb fragments. These results are significant in that they provide a mechanistic framework for further exploring the use of SF-1.5v as a novel chemotherapeutics against human cervical cancer.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The acquisition of oligosaccharides from chitosan has been the subject of several studies in the pharmaceutical, biochemical, food and medical due to functional properties of these compounds. This study aimed to boost its production of chitooligosaccharides (COS) through the optimization of production and characterization of chitosanolytic enzymes secreted by microorganisms Paenibacillus chitinolyticus and Paenibacillus ehimensis, and evaluating the antioxidant potential of the products obtained. In the process of optimizing the production of chitosanase were employed strategies Fractional Factorial Experimental Design and Central Composite Rotatable Design. The results identified the chitosan, peptone and yeast extract as the components that influenced the production of chitosanase by these microorganisms. With the optimization of the culture media was possible to obtain an increase of approximately 8.1 times (from 0.043 to 0.35 U.mL U.mL-1) and 7.6 times (from 0.08 U.mL-1 to 0.61 U.mL-1) in the enzymatic activity of chitosanase produced by P. chitinolyticus and P. ehimensis respectively. Enzyme complexes showed high stability in temperature ranges between 30º and 55º C and pH between 5.0 and 9.0. Has seen the share of organic solvents, divalent ions and other chemical agents on the activity of these enzymes, demonstrating high stability of these crude complexes and dependence of Mn2+. The COS generated showed the ability of DPPH radical scavenging activity, reaching a maximum rate of scavenging of 61% and 39% when they were produced with enzymes of P. ehimensis and P. chitinolyticus respectively. The use of these enzymes in raw form might facilitate its use for industrial applications

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior