Prevalence and microbiological diversity of Archaea in peri-implantitis subjects by 16S ribosomal RNA clonal analysis

Background and Objective: This study evaluated the prevalence and the molecular diversity of Archaea in the subgingival biofilm samples of subjects with peri-implantitis. Material and Methods: Fifty subjects were assigned into two groups: Control (n = 25), consisting of subjects with healthy implants; and Test (n = 25), consisting of subjects with peri-implantitis sites, as well as a healthy implant. In the Test group, subgingival biofilm samples were taken from the deepest sites of the diseased implant. In both groups, subgingival biofilm was collected from one site with a healthy implant and from one site with a periodontally healthy tooth. DNA was extracted and the 16S ribosomal RNA gene was amplified with universal primer pairs for Archaea. Amplified genes were cloned and sequenced, and the phylotypes were identified by comparison with known 16S ribosomal RNA sequences. Results: In the Control group, Archaea were detected in two and three sites of the implant and the tooth, respectively. In the Test group, Archaea were detected in 12, 4 and 2 sites of diseased implants, healthy implants and teeth, respectively. Diseased implants presented a significantly higher prevalence of Archaea in comparison with healthy implants and natural teeth, irrespective of group. Over 90% of the clone libraries were formed by Methanobrevibacter oralis, which was detected in both groups. Methanobacterium congelense/curvum was detected in four subjects from the Test group and in two subjects from the Control group. Conclusion: Although M. oralis was the main species of Archaea associated with both healthy and diseased implant sites, the data indicated an increased prevalence of Archaea in peri-implantitis sites, and their role in pathogenesis should be further investigated.

Induction of neutralizing antibodies in mice immunized with an amino-terminal polypeptide of Streptococcus mutans P1 protein produced by a recombinant Bacillus subtilis strain

The oral pathogen Streptococcus mutans expresses a surface protein, P1, which interacts with the salivary pellicle on the tooth surface or with fluid-phase saliva, resulting in bacterial adhesion or aggregation, respectively. P1 is a target of protective immunity. Its N-terminal region has been associated with adhesion and aggregation functions and contains epitopes recognized by efficacious antibodies. In this study, we used Bacillus subtilis, a gram-positive expression host, to produce a recombinant N-terminal polypeptide of P1 (P1(39-512)) derived from the S. mutans strain UA159. Purified P1(39-512) reacted with an anti-full-length P1 antiserum as well as one raised against intact S. mutans cells, indicating preserved antigenicity. Immunization of mice with soluble and heat-denatured P1(39-512) induced antibodies that reacted specifically with native P1 on the surface of S. mutans cells. The anti-P1(39-512) antiserum was as effective at blocking saliva-mediated aggregation of S. mutans cells and better at blocking bacterial adhesion to saliva-coated plastic surfaces compared with the anti-full-length P1 antiserum. In addition, adsorption of the anti-P1 antiserum with P1(39-512) eliminated its ability to block the adhesion of S. mutans cells to abiotic surfaces. The present results indicate that P1(39-512), expressed and purified from a recombinant B. subtilis strain, maintains important immunological features of the native protein and represents an additional tool for the development of anticaries vaccines.

AFM analysis of bleaching effects on dental enamel microtopography

The purpose of this in vitro study was to test a new methodology to evaluate the effects of 35% hydrogen peroxide agent on the microtopography of sound enamel using an atomic force microscope (AFM). The buccal sound surfaces of three extracted human lower incisors were used, without polishing the surfaces to maintain them with natural morphology. These unpolished surfaces were subjected to bleaching procedure with 35% hydrogen peroxide that consisted of 4 applications of the bleaching agent on enamel surfaces for 10 min each application. Surface images were obtained in a 15 mu m x 15 mu m area using an AFM. The roughness (Ra and RMS) and the power spectral density (PSD) were obtained before and after the bleaching treatment. As results we could inquire that the PSD analyses were very suitable to identifying the morphological changes on the surfaces, while the Ra and RMS parameters were insufficient to represent the morphological alterations promoted by bleaching procedure on enamel. The morphological wavelength in the range of visible light spectrum(380-750 nm) was analyzed, showing a considerable increase of the PSD with the bleaching treatment. (C) 2009 Elsevier B. V. All rights reserved.

Changes on degree of conversion of dual-cure luting light-cured with blue LED

The indirect adhesive procedures constitute recently a substantial portion of contemporary esthetic restorative treatments. The resin cements have been used to bond tooth substrate and restorative materials. Due to recently introduction of the self-bonding resin luting cement based on a new monomer, filler and initiation technology has become important to study the degree of conversion of these new materials. In the present work the polymerization reaction and the filler content of dual-cured dental resin cements were studied by means of infra-red spectroscopy (FT-IR) and thermogravimetry (TG). Twenty specimens were made in a metallic mold (8 mm diameter x 1 mm thick) from each of 2 cements, PanaviaA (R) F2.0 (Kuraray) and RelyX (TM) Unicem Applicap (3M/ESPE). Each specimen was cured with blue LED with power density of 500 mW/cm(2) for 30 s. Immediately after curing, 24 and 48 h, and 7 days DC was determined. For each time interval 5 specimens were pulverized, pressed with KBr and analyzed with FT-IR. The TG measurements were performed in Netzsch TG 209 under oxygen atmosphere and heating rate of 10A degrees C/min from 25 to 700A degrees C. A two-way ANOVA showed DC (%) mean values statistically significance differences between two cements (p < 0.05). The Tukey`s test showed no significant difference only for the 24 and 48 h after light irradiation for both resin cements (p > 0.05). The Relx-Y (TM) Unicem mean values were significantly higher than PanaviaA (R) F 2.0. The degree of conversion means values increasing with the storage time and the filler content showed similar for both resin cements.

Dentin hypersensitivity clinical study comparing LILT and LEDT keeping the same irradiation parameters

Dentin hypersensitivity is a common condition associated with high dental pain. A new LED-based (light emitting diode) light source has been used as an experimental tool in some studies. Purpose: The main objective was to compare these two light sources emitting in the same spectral band (red from 625 to 660 nm) to promote pain relief. Material and methods: A total of 6 sessions were accomplished, being three irradiation sessions and three follow-up sessions. This single-blind study compared a control group (Placebo) and two other groups with different equipments: low laser intensity treatment (LILT) and a light emitting diode system treatment (LEDT). Results: The results showed that there is no statistical difference between LILT and LEDT groups, however, both were better than control group (p=0.01) in terms of treatment efficiency; there is no difference between the second and the third sessions for both treatment, it means that the third session was not necessary; finally, the improvement at the end of the entire research (follow up care of 30 days) was very expressive in comparison to pre-treatment situation for all teeth (p=0.01). Conclusion: LILT and LEDT were equally effective to treat dentine hypersensitivity, a 3rd treatment session was not necessary/two sessions are enough.

Chondrichthyans from the base of the Irati Formation (Early Permian, Parana Basin), Sao Paulo, Brazil

Three species of chondrichthyans are reported from conglomeratic sandstone at the base of the Lower Permian (Artinskian) Irati Formation (Parana Basin) near Rio Claro, Sao Paulo State, Brazil. The fossils include: 1) dispersed teeth of the petalodont ltapyrodus punctatus Silva Santos 1990, first described from the Permian (Artinskian) Pedra do Fogo Formation, Parnaiba Basin, Northeast Brazil; 2) a new species of tooth of the Order Orodontiformes; and 3) a new species of finspine of the Order Ctenacanthiformes. These fossils occur in an allochthonous assemblage of vertebrate remains including other Chondrichthyes, Xenacanthiformes and cladodonts, paleonisciform bony fish, and tetrapods. This discovery is a significant contribution to the sparse record of South American Chondrichthyes from the Early Permian and raises questions regarding the paleoenvironmental adaptations among these fish within Paleozoic basins of Brazil at this time. (C) 2010 International Association for Gondwana Research. Published by Elsevier B.V. All rights reserved.

Saliva flow rate, buffer capacity, and pH of autistic individuals

The objective of the study was to evaluate saliva flow rate, buffer capacity, pH levels, and dental caries experience (DCE) in autistic individuals, comparing the results with a control group (CG). The study was performed on 25 noninstitutionalized autistic boys, divided in two groups. G1 composed of ten children, ages 3-8. G2 composed of 15 adolescents ages 9-13. The CG was composed of 25 healthy boys, randomly selected and also divided in two groups: CG3 composed of 14 children ages 4-8, and CG4 composed of 11 adolescents ages 9-14. Whole saliva was collected under slight suction, and pH and buffer capacity were determined using a digital pHmeter. Buffer capacity was measured by titration using 0.01 N HCl, and the flow rate expressed in ml/min, and the DCE was expressed by decayed, missing, and filled teeth (permanent dentition [DMFT] and primary dentition [dmft]). Data were plotted and submitted to nonparametric (Kruskal-Wallis) and parametric (Student`s t test) statistical tests with a significance level less than 0.05. When comparing G1 and CG3, groups did not differ in flow rate, pH levels, buffer capacity, or DMFT. Groups G2 and CG4 differ significantly in pH (p = 0.007) and pHi = 7.0 (p = 0.001), with lower scores for G2. In autistic individuals aged 3-8 and 9-13, medicated or not, there was no significant statistical difference in flow rate, pH, and buffer capacity. The comparison of DCE among autistic children and CG children with deciduous (dmft) and mixed/permanent decayed, missing, and filled teeth (DMFT) did not show statistical difference (p = 0.743). Data suggest that autistic individuals have neither a higher flow rate nor a better buffer capacity. Similar DCE was observed in both groups studied.

Geometry and combinatorics of the cutting angle method

Lower approximation of Lipschitz functions plays an important role in deterministic global optimization. This article examines in detail the lower piecewise linear approximation which arises in the cutting angle method. All its local minima can be explicitly enumerated, and a special data structure was designed to process them very efficiently, improving previous results by several orders of magnitude. Further, some geometrical properties of the lower approximation have been studied, and regions on which this function is linear have been identified explicitly. Connection to a special distance function and Voronoi diagrams was established. An application of these results is a black-box multivariate random number generator, based on acceptance-rejection approach.

An early occurrence of Sarcophilus laniarius harrisii (Marsupialia, Dasyuridae) from the early Pleistocene of Nelson Bay, Victoria

The isolated lower molar series of a dasyurid from early Pleistocene sediments at Nelson Bay, near Portland, is referred herein to Sarcophilus laniarius harrisii (Boitard, 1842). Dental measurements and morphological comparisons taken from this tooth series compare closely with those of the extant subspecies. The genus Sarcophilus is known from the early Pleistocene by the species S. moornaensis Crabb 1982. Fossil material assigned to S. laniarius harrisii is now also known from Early Pleistocene sediments. The new specimens from Nelson Bay extend the origin of S. laniarius harrisii to the early Pleistocene.

Cutting angle method - a tool for constrained global optimization

Cutting angle method (CAM) is a deterministic global optimization technique applicable to Lipschitz functions f: Rn → R. The method builds a sequence of piecewise linear lower approximations to the objective function f. The sequence of solutions to these relaxed problems converges to the global minimum of f. This article adapts CAM to the case of linear constraints on the feasible domain. We show how the relaxed problems are modified, and how the numerical efficiency of solving these problems can be preserved. A number of numerical experiments confirms the improved numerical efficiency.

Functional morphology of the gastric mills of carnivorous, omnivorous, and herbivorous land crabs

Terrestrial decapods consume a wide variety of plant and animal material. The potential adaptations of carnivorous, omnivorous, and herbivorous terrestrial crustaceans were studied by examining the functional morphology of the gastric mill. Two closely related species from each feeding preference group were examined to identify which features of the mill were due to phylogeny and which were due to adaptation. The morphology of the gastric mill matched the diet well; the gastric mills of the carnivorous species (Geograpsus grayi and Geograpsus crinipes) possessed a blunt, rounded medial tooth and flattened lateral teeth with a longitudinal grinding groove. These features make them well suited to a carnivorous diet of soft animal tissue as well as hard material, such as arthropod exoskeleton. In contrast, the mill of the herbivorous gecarcinids (Gecarcoidea natalis and Discoplax hirtipes) consisted of a medial tooth with sharp transverse ridges and lateral teeth with sharp interlocking cusps and ridges and no grinding surface. These features would efficiently shred fibrous plant material. The morphology of the mill of the omnivorous coenobitids (Coenobita perlatus and Birgus latro) was more generalized toward a mixed diet. However, the mill of B. latro was more adapted to deal with highly nutritious food items, such as nuts and heavily calcified decapods. Its mill possessed lateral teeth with extended ridges, which sat close to the calcified cardiopyloric valve to form a flattened floor. Hard items trapped in the mill would be crushed against this surface by the medial tooth.

A post-contact Aboriginal mortuary tree from southwestern Victoria, Australia

Here we document the investigation of the first Australian Aboriginal mortuary tree found since the early 20th century and the first studied by archaeologists and Aboriginal traditional owners. In 2001, a landowner discovered Aboriginal skeletal remains inside a fallen, dead tree while evaluating the tree’s potential as firewood, leading to the investigation of the site. The tree was located near Moyston, in southwestern Victoria, in traditional Djab Wurrung country and held the partial skeletons of three Aboriginal individuals—two adults and a child. Clay pipe-stem wear on several teeth belonging to the two adults indicates that these remains were broadly contemporaneous secondary placements from the early post-contact period (ca. A.D. 1835–1845). Along with five additional mortuary trees within 30 km of the Moyston tree, this practice constitutes a previously unknown traditional mortuary pattern and contributes to our understanding of the complex mortuary behavior of the Aboriginal people of southwestern Victoria.

Strontium in 19th century Australian children’s teeth

The enamel of teeth from 57 children, who died in the mid to late 1800s, were analysed to investigate strontium (Sr) concentrations in historic teeth. Teeth were analysed using proton induced X-ray emission at the Australian Nuclear Science and Technology Organisation (ANSTO). Where available, multiple teeth were analysed for each individual including permanent (molars and premolars) and deciduous teeth (molars). Preliminary results show that Sr does not appear to be affected by the postmortem environment. Sr levels in permanent molars strongly correlate with levels in the premolars but not with the deciduous molars. Concerns are raised over the large variation seen in Sr levels and the effect it would have on the interpretation of Sr levels in studies with small sample sizes.

Determinants of permanent first incisor eruption in grazing Australian Angora goats

Objective: To investigate the effects of live weight, sex and other factors on deciduous (first incisor) loss and permanent first incisor development in Angora goats. Design: Goats were part of a pen study on the effects of energy intake in Angora does during pregnancy and lactation on kid growth and development. The design was three levels of nutrition in mid-pregnancy × two levels of postnatal nutrition in 17 randomised blocks. Methods: Conception times were calculated by using artificial insemination, with ultrasound examination 43 days after insemination. Does were fed different amounts of a formulated diet in their pens. After weaning, goats were grazed in sex groups. Deciduous first incisor loss and permanent first incisor development were recorded at 11 time points from 14 to 20 months of age. Results: For each sex, the time for visible eruption and full development of permanent first incisor declined linearly with increased live weight by 5.9 and 5.4 days/kg live weight, respectively. The time to reach similar development stages for first permanent incisors eruption was 3 months longer for the lightest animals compared with the heaviest animals. Date of birth, birth weight, doe age, growth rates, mid-pregnancy and postnatal nutrition, parity, day of weaning and weaning weight had no detectable effect. Conclusions: The results explain much of the substantial range in reported first permanent incisor eruption dates for small ruminants and have application in ageing of goats, marketing of kids for meat, in the selection of animals for breeding flocks and in educational material.

Ecosystem restoration with teeth : what role for predators?

Recent advances highlight the potential for predators to restore ecosystems and confer resilience against globally threatening processes, including climate change and biological invasions. However, releasing the ecological benefits of predators entails significant challenges. Here, we discuss the economic, environmental and social considerations affecting predator-driven ecological restoration programmes, and suggest approaches for reducing the undesirable impacts of predators. Because the roles of predators are context dependent, we argue for increased emphasis on predator functionality in ecosystems and less on the identities and origins of species and genotypes. We emphasise that insufficient attention is currently given to the importance of variation in the social structures and behaviours of predators in influencing the dynamics of trophic interactions. Lastly, we outline experiments specifically designed to clarify the ecological roles of predators and their potential utility in ecosystem restoration.