Design optimization of cruciform specimens for biaxial fatigue loading

In order to correctly assess the biaxial fatigue material properties one must experimentally test different load conditions and stress levels. With the rise of new in-plane biaxial fatigue testing machines, using smaller and more efficient electrical motors, instead of the conventional hydraulic machines, it is necessary to reduce the specimen size and to ensure that the specimen geometry is appropriated for the load capacity installed. At the present time there are no standard specimen’s geometries and the indications on literature how to design an efficient test specimen are insufficient. The main goal of this paper is to present the methodology on how to obtain an optimal cruciform specimen geometry, with thickness reduction in the gauge area, appropriated for fatigue crack initiation, as a function of the base material sheet thickness used to build the specimen. The geometry is optimized for maximum stress using several parameters, ensuring that in the gauge area the stress is uniform and maximum with two limit phase shift loading conditions. Therefore the fatigue damage will always initiate on the center of the specimen, avoiding failure outside this region. Using the Renard Series of preferred numbers for the base material sheet thickness as a reference, the reaming geometry parameters are optimized using a derivative-free methodology, called direct multi search (DMS) method. The final optimal geometry as a function of the base material sheet thickness is proposed, as a guide line for cruciform specimens design, and as a possible contribution for a future standard on in-plane biaxial fatigue tests. © 2014, Gruppo Italiano Frattura. All rights reserved.

The effect of superplasticizers on the workability and compressive strength of concrete made with fine recycled concrete aggregates

The reuse of structural concrete elements to produce new concrete aggregates is accepted as an alternative to dumping them and is favourable to the sustainability of natural reserves. Even though the construction sector is familiar with the use of coarse recycled concrete aggregates, the recycled concrete fines are classified as less noble resources. This research sets out to limit the disadvantages associated with the performance of concrete containing fine recycled concrete aggregates through the use of superplasticisers. Two types of latest generation superplasticisers were used that differ in terms of water reduction capacity and robustness, and the workability, density and compressive strength of each of the compositions analysed were then compared: a reference concrete, with no plasticisers, and concrete mixes with the superplasticisers. For each concrete family mixes with 0%, 10%, 30%, 50% and 100% replacement ratios of fine natural aggregates (FNA) by fine recycled concrete aggregates (FRA) were analysed. Concrete with incorporation of recycled aggregates was found to have poorer relative performance. The mechanical performance of concrete with recycled aggregates and superplasticisers was generally superior to that of the reference concrete with no admixtures and of conventional concrete with lower performance superplasticisers.

Fabrication of the three-dimensional dendritic Ni-Co films by electrodeposition on stainless steel substrates

Co-deposition of nickel and cobalt was carried out on austenitic stainless steel (AISI 304) substrates by imposing a square waveform current in the cathodic region. The innovative procedure applied in this work allows creating a stable, fully developed, and open porous three-dimensional (3D) dendritic structure, which can be used as electrode for redox supercapacitors. This study investigates in detail the influence of the applied current density on the morphology, mass, and chemical composition of the deposited Ni-Co films and the resulting 3D porous network dendritic structure. The morphology and the physicochemical composition were studied by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (W). The electrochemical behavior of the materials was evaluated by cyclic voltammetry (CV). The results highlight the mechanism involved in the coelectrodeposition process and how the lower limit current density tailors the film composition and morphology, as well as its electrochemical activity.

Credit risk measures: a case of renewable energy companies

The Basel III will have a significant impact on the European banking sector. In September 2010, supervisors of various countries adopted the new rules proposed by the prudential Committee on Banking Supervision to be applied to the business of credit institutions (hereinafter called ICs) in a phased manner from 2013, assuming to its full implementation by 2019. The purpose of this new regulation is to limit the excessive risk that these institutions took on the period preceding the global financial crisis of 2008. This new regulation is known in slang by Basel III. Depending on the requirement of Basel II for banks and their supervisors to assess the soundness and adequacy of internal risk measurement and credit management systems, the development of methodologies for the validation of internal and external evaluation systems is clearly an important issue . More specifically, there is a need to develop tools to validate the systems used to generate the parameters (such as PD, LGD, EAD and ratings of perceived risk) that serve as starting points for the IRB approach for credit risk. In this context, the work is composed of a number of approaches and tools used to evaluate the robustness of these elements IRB systems.

ERICA: intake of macro and micronutrients of Brazilian adolescents

ABSTRACT OBJECTIVE To describe food and macronutrient intake profile and estimate the prevalence of inadequate micronutrient intake of Brazilian adolescents. METHODS Data from 71,791 adolescents aged from 12 to 17 years were evaluated in the 2013-2014 Brazilian Study of Cardiovascular Risks in Adolescents (ERICA). Food intake was estimated using 24-hour dietary recall (24-HDR). A second 24-HDR was collected in a subsample of the adolescents to estimate within-person variability and calculate the usual individual intake. The prevalence of food/food group intake reported by the adolescents was also estimated. For sodium, the prevalence of inadequate intake was estimated based on the Tolerable Upper Intake Level (UL). The Estimated Average Requirement (EAR) method used as cutoff was applied to estimate the prevalence of inadequate nutrient intake. All the analyses were stratified according to sex, age group and Brazilian macro-regions. All statistical analyses accounted for the sample weight and the complex sampling design. RESULTS Rice, beans and other legume, juice and fruit drinks, breads and meat were the most consumed foods among the adolescents. The average energy intake ranged from 2,036 kcal (girls aged from 12 to 13 years) to 2,582 kcal (boy aged from14 to 17 years). Saturated fat and free sugar intake were above the maximum limit recommended (< 10.0%). Vitamins A and E, and calcium were the micronutrients with the highest prevalence of inadequate intake (> 50.0%). Sodium intake was above the UL for more than 80.0% of the adolescents. CONCLUSIONS The diets of Brazilian adolescents were characterized by the intake of traditional Brazilian food, such as rice and beans, as well as by high intake of sugar through sweetened beverages and processed foods. This food pattern was associated with an excessive intake of sodium, saturated fatty acids and free sugar.

Fractional describing function of systems with nonlinear friction

This paper studies the describing function (DF) of systems consisting in a mass subjected to nonlinear friction. The friction force is composed in three components namely, the viscous, the Coulomb and the static forces. The system dynamics is analyzed in the DF perspective revealing a fractional-order behaviour. The reliability of the DF method is evaluated through the signal harmonic content and the limit cycle prediction.

QED and relativistic corrections in superheavy elements

In this paper we review the different relativistic and QED contributions to energies, ionic radii, transition probabilities and Landé g-factors in super-heavy elements, with the help of the MultiConfiguration Dirac-Fock method (MCDF). The effects of taking into account the Breit interaction to all orders by including it in the self-consistent field process are demonstrated. State of the art radiative corrections are included in the calculation and discussed. We also study the non-relativistic limit of MCDF calculation and find that the non-relativistic offset can be unexpectedly large.

Avaliação da qualidade do ar interior em edifícios do ISEP

Mestrado em Engenharia Química - Ramo Tecnologias de Protecção Ambiental

The nature of the ordered phase of the confined self-assembled rigid Rod model

We investigate the nature of the ordered phase and the orientational correlations between adjacent layers of the confined three-dimensional self-assembled rigid rod model, on the cubic lattice. We find that the ordered phase at finite temperatures becomes uniaxial in the thermodynamic limit, by contrast to the ground state (partial) order where the orientation of the uncorrelated layers is perpendicular to one of the three lattice directions. The increase of the orientational correlation between layers as the number of layers increases suggests that the unconfined model may also exhibit uniaxial ordering at finite temperatures.

Pesados híbridos na distribuição alimentar

Dissertação apresentada ao Instituto Politécnico do Porto para obtenção do Grau de Mestre em Logística Orientada por: Professora Doutora Patrícia Alexandra Gregório Ramos

Economia energética por medição de cor em linha do açúcar à saída das centrífugas no processo de refinação da rama de açúcar

Mestrado em Engenharia Química

A gestão dos resíduos hospitalares e o papel da autoridade de saúde : caso do concelho da Amad

RESUMO O Problema. A natureza, diversidade e perigosidade dos resíduos hospitalares (RH) exige procedimentos específicos na sua gestão. A sua produção depende do número de unidades de prestação de cuidados de saúde (upcs), tipo de cuidados prestados, número de doentes observados, práticas dos profissionais e dos órgãos de gestão das upcs, inovação tecnológica, entre outros. A gestão integrada de RH tem evoluído qualitativamente nos últimos anos. Existe uma carência de informação sobre os quantitativos de RH produzidos nas upcs e na prestação de cuidados domiciliários, em Portugal. Por outro lado, os Serviços de Saúde Pública, abrangendo o poder de Autoridade de Saúde, intervêm na gestão do risco para a saúde e o ambiente associado à produção de RH, necessitando de indicadores para a sua monitorização. O quadro legal de um país nesta matéria estabelece a estratégia de gestão destes resíduos, a qual é condicionada pela classificação e definição de RH por si adoptadas. Objectivos e Metodologias. O presente estudo pretende: quantificar a produção de RH resultantes da prestação de cuidados de saúde, em seres humanos e animais nas upcs, do sistema público e privado, desenvolvendo um estudo longitudinal, onde se quantifica esta produção nos Hospitais, Centros de Saúde, Clínicas Médicas e Dentárias, Lares para Idosos, Postos Médicos de Empresas, Centros de Hemodiálise e Clínicas Veterinárias do Concelho da Amadora, e se compara esta produção em dois anos consecutivos; analisar as consequências do exercício do poder de Autoridade de Saúde na gestão integrada de RH pelas upcs; quantificar a produção média de RH, por acto prestado, nos cuidados domiciliários e, com um estudo analítico transversal, relacionar essa produção média com as características dos doentes e dos tratamentos efectuados; proceder à análise comparativa das definições e classificações de RH em países da União Europeia, através de um estudo de revisão da legislação nesta matéria em quatro países, incluindo Portugal. Resultados e Conclusões. Obtém-se a produção média de RH, por Grupos I+II, III e IV: nos Hospitais, por cama.dia, considerando a taxa de ocupação; por consulta, nos Centros de Saúde, Clínicas Médicas e Dentárias e Postos Médicos de Empresas; por cama.ano, nos Lares para Idosos, considerando a sua taxa de ocupação; e por ano, nas Clínicas de Hemodiálise e Veterinárias. Verifica-se que a actuação da Autoridade de Saúde, produz nas upcs uma diferença estatisticamente significativa no aumento das contratualizações destas com os operadores de tratamento de RH. Quantifica-se o peso médio de resíduos dos Grupos III e IV produzido por acto prestado nos tratamentos domiciliários e relaciona-se esta variável dependente com as características dos doentes e dos tratamentos efectuados. Comparam-se os distintos critérios utilizados na elaboração das definições e classificações destes resíduos inscritas na legislação da Alemanha, Reino Unido, Espanha e Portugal. Recomendações. Apresentam-se linhas de investigação futura e propõe-se uma reflexão sobre eventuais alterações de aspectos específicos no quadro legal português e nos planos de gestão integrada de RH, em Portugal. ABSTRACT The problem: The nature, diversity and hazardousness of hospital wastes (HW) requires specific procedures in its management. Its production depends on the number and patterns of healthcare services, number of patients, professional and administration practices and technologic innovations, among others. Integrated management of HW has been developping, in the scope of quality, for the past few years. There is a lack of information about the amount of HW produced in healthcare units and in the domiciliary visits, in Portugal. On the other hand, the Public Health Services, embracing the Health Authority’s power, play a very important role in managing the risk of HW production to public and environmental health. They need to use some indicators in its monitorization. In a country, rules and regulations define hospital waste management policies, which are confined by the addopted classification and definition of HW. Goals and Methods: This research study aims to quantify the production of HW as a result of healthcare services in human beings and animals, public service and private one. Through a longitudinal study, this production is quantified in Hospitals, Health Centers, Medical and Dental Clinics, Residential Centers for old people, Companies Medical Centers and Veterinary and Haemodyalisis Clinics in Amadora’s Council, comparing this production in two consecutive years. This study also focus the consequences of the Health Authority’s role in the healthcare services integrated management of HW. The middle production of HW in the domiciliary treatments is also quantified and, with a transversal analytic study, its association with patients and treatments’ characteristics is enhanced. Finally, the definitions and classifications in the European Union Countries are compared through a study that revises this matter’s legislation in four countries, including Portugal. Results and Conclusions: We get the middle production of Groups I+II, III and IV: HW: in Hospitals, by bed.day, bearing the occupation rate; by consultation, in Health Centers, Medical and Dental Clinics and Companies Medical Centers; by bed.year in Residential Centers for old people, considering their occupation rate; by year, in Veterinary and Haemodyalisis Clinics. We verify that the Health Authority’s role produces a significative statistical difference in the rise of the contracts between healthcare services and HW operators. We quantify the Groups III and IV’s wastes middle weight, produced by each medical treatment in domiciliary visits and relate this dependent variable with patients and treatments’ characteristics. We compare the different criteria used in the making of definitions and classifications of these wastes registered in German, United Kingdom, Spain and Portugal’s laws. Recommendations: Lines of further investigation are explaned. We also tender a reflexion about potential changes in rules, in regulations and in the integrated plans for managing hospital wastes in Portugal. RÉSUMÉ Le Problème. La gestion des déchets d'activités hospitalières (DAH) et de soins de santé (DSS) exige des procédures spécifiques en raison de leur nature, diversité et dangerosité. Leur production dépend, parmi d’autres, du nombre d’unités de soins de santé (USS), du type de soins administrés, du nombre de malades observés, des pratiques des professionnels et des organes de gestion des USS, de l’innovation technologique. La gestion intégrée des DAH et des DSS subit une évolution qualitative dans les dernières années. Il existe un déficit d’information sur les quantitatifs de DAH et de DSS provenant des USS et de la prestation de soins domiciliaires, au Portugal. D’autre part les Services de Santé Publique, y compris le pouvoir de l’Autorité de Santé, qui interviennent dans la gestion du risque pour la santé et pour l’environnement associé à la production de DAH et de DSS, ont besoin d’indicateurs pour leur surveillance. Dans cette matière le cadre légal établit la stratégie de gestion de ces déchets, laquelle est conditionnée par la classification et par la définition des DAH et des DSS adoptées par le pays. Objectifs et Méthodologie. Cet étude prétend: quantifier la production de DAH et de DSS provenant de la prestation de soins de santé, en êtres humains et animaux dans les USS du système public et privé. À travers un étude longitudinal, on quantifie cette production dans les Hôpitaux, Centres de Santé, Cliniques Médicales et Dentaires, Maisons de Repos pour personnes âgées, Cabinets Médicaux d’ Entreprises, Centres d’Hémodialyse et Cliniques Vétérinaires du municipe d’ Amadora, en comparant cette production en deux ans consécutifs; analyser les conséquences de l’exercice du pouvoir de l’Autorité de Santé dans la gestion intégrée des DAH et des DSS par les USS; quantifier la production moyenne de DAH et de DSS dans la prestation de soins domiciliaires et, avec un étude analytique transversal, rapporter cette production moyenne avec les caractéristiques des malades et des soins administrés; procéder à l’ analyse comparative des définitions et classifications des DAH et des DSS dans des pays de l’Union Européenne, à travers un étude de révision de la législation relative à cette matière dans quatre pays, Portugal y compris. Résultats et Conclusions. On obtient la production moyenne de DAH et des DSS, par Classes I+II, III et IV: dans les hôpitaux, par lit.jour, en considérant le taux d’occupation; par consultation, dans les Centres de Santé, Cliniques Médicales et Dentaires et Cabinets Médicaux d’ Entreprises par lit.an dans les Maisons de Repos pour personnes âgées en considérant le taux d’occupation; et par an, dans les Cliniques d’Hémodialyse et Vétérinaires. On constate que l’actuation de l’Autorité de Santé produit dans les USS une différence statistiquement significative dans l’accroissement de leurs contractualisations avec les opérateurs de traitement de DAH et de DSS. On quantifie le poids moyen des déchets des Classes III et IV produit par acte de prestation de soins à domicile et on rapporte cette variable dépendante avec les caractéristiques des malades et des soins administrés. On compare les différents critères utilisés dans l’élaboration des définitions et des classifications de ces déchets inscrites dans la légis

Production of recombinant protein hLIF in static and dynamic systems of animal cell culture

Thesis for the Degree of Master of Science in Biotechnology Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Modeling radionuclides dispersion and deposition downwind of a coal-fired power plant

In this study the inhalation doses and respective risk are calculated for the population living within a 20 km radius of a coal-fired power plant. The dispersion and deposition of natural radionuclides were simulated by a Gaussian dispersion model estimating the ground level activity concentration. The annual effective dose and total risk were 0.03205 mSv/y and 1.25 x 10-8, respectively. The effective dose is lower than the limit established by the ICRP and the risk is lower than the limit proposed by the U.S. EPA, which means that the considered exposure does not pose any risk for the public health.

Definição de padrões de plasticidade de solos através do cone de penetração, por comparação com o método de Casagrande

Existe uma vasta literatura que defende a utilização do ensaio com o cone Penetrómetro ou fall cone como sendo uma alternativa razoável relativamente ao método mais tradicional na determinação do limite de liquidez, a concha de Casagrande. Com este trabalho pretende-se dar mais um contributo à temática da obtenção dos parâmetros de plasticidade dos solos, utilizando diferentes dispositivos e metodologias distintas. Para tal, selecionou-se um solo de caráter argiloso, proveniente de um barreiro da zona de Chaves, e estabeleceram-se comparações entre os valores dos limites de consistência, obtidos pela concha de Casagrande e pelo fall cone. Nesse âmbito, foi elaborada, inicialmente, uma caracterização deste tipo de solos, a definição de conceitos importantes como o de limite de liquidez, limite de plasticidade e índice de plasticidade, assim como uma descrição do funcionamento daqueles dispositivos e das variáveis associadas a cada um deles. Procedeu-se à classificação do solo, segundo três sistemas, através de ensaios de identificação e caracterização, com o objetivo de inferir acerca da composição e comportamento do mesmo. Foi também objetivo deste trabalho, estudar a potencial influência do operador, nos resultados obtidos em ambos os dispositivos. Desta forma, foi possível concluir acerca das vantagens e desvantagens de cada aparelho e definir perspetivas para trabalhos futuros.