The chromatographic separation of carbohydrate mixtures

The separation performance of a semicontinuous counter-current chromatographic refiner (SCCR7), consisting of twelve 5.4 cm id x 75cm long columns packed with calcium charged cross-linked polysytrene resin (KORELA VO7C), was optimised. An industrial barley syrup was used containing 42% fructose, 52% glucose and 6% maltose and oligosaccharides. The effects of temperature, flow rates and concentration on the distribution coefficients were evaluated and quantified by deriving general relationships. The effects of flow rates, feed composition and concentration on the separation performance of the SCCR7 were identified and general relationships between them and the switch time, which was found to be the controlling parameter, were developed. Fructose rich (FRP) and glucose rich (GRP) product purities of 99.9% were obtained at 18.6% w/v feed concentrations. When a 66% w/v feed concentration was used and product splitting technique was employed, the throughput was 32.1 kg sugar solids/m3 resin/hr. The GRP contained less than 4.5% fructose, the FRP was over 95% pure, and the respective concentrations were 22.56 and 11.29% w/v. Over 94% of the glucose and 95.78% of the fructose in the feed were recovered in the GRP and FRP respectively. By recycling the dilute product split fractions, the GRP and FRP concentrations were increased to 25.4 and 12.96% w/v; the FRP was 90.2% pure and the GRP contained 6.69% w/v fructose. A theoretical link between batch and semicontinuous chromatographic equipments has been determined. A computer simulation was developed predicting successfully the purging concentration profiles at `pseudo-equilibrium', and also certain system design parameters. An important further aspect of the work has been to study the behaviour of chromatographic bioreactor-separators. Such batch systems of 5.4cm id and lengths varying between 30 and 230cm, were used to investigate the effect of scaling up on the conversion of sucrose into dextran and fructose in the presence of the dextransucrase enzyme. Conversions of over 80% were achieved at 4 hr sucrose residence times. The crude dextransucrase was purified using centrifugation, ultrafiltration and cross-flow microfiltration techniques. Better enzyme stability was obtained by first separating the non-solid impurities using cross-flow microfiltration, and then removing the cells from the enzyme immediately before use by continuous centrifugation.

The role of the greens in the local politics of West Germany.

The study examines the contribution of the Greens to the changing nature of West Germany's local politics in the 1980s. The changes correspond broadly to the politicisation and parliamentarisation of a sphere of government traditionally perceived as being "unpolitical". Building upon theories of the New Politics, it is suggested that the varying pace of socio-economic change across the Federal Republic underlies the nonuniform development of its local party systems. The party systems of localities which have witnessed rapid social and economic change are found to be more susceptible to the emergence of a New Politics dimension than those of communities in which change has occurred less rapidly. The thesis continues by addressing aspects of the Greens' role in the development of local party systems across the Federal Republic. Despite the fact that marked differences in the Greens' approach to local political participation are registered in communities of varying socio-economic types, it is argued that the Greens are largely responsible for the introduction of a "New Local Politics" dimension into West Germany's local party systems. In a comprehensive study of the Greens' role in the Mainz party system, the conflicting styles and practices of the Greens and the established political parties in the city are depicted. The failure of the Green Party to form an alliance with the SPD in the city council is attributed to the cleavage between the Greens' New Politics and the SPD's Old Politics approaches. A detailed analysis of the parliamentary initiatives introduced by the four parties represented in the Mainz council between 1984 and 1987 also supports the contention that a New Politics dimension exists in the city's party system. This dimension is identified as representing a significant source of conflict during the period of analysis.

The development of a multi-function computer-assisted instruction system using a hierarchical database structure as the lesson compendium.

Computer-Based Learning systems of one sort or another have been in existence for almost 20 years, but they have yet to achieve real credibility within Commerce, Industry or Education. A variety of reasons could be postulated for this, typically: - cost - complexity - inefficiency - inflexibility - tedium Obviously different systems deserve different levels and types of criticism, but it still remains true that Computer-Based Learning (CBL) is falling significantly short of its potential. Experience of a small, but highly successful CBL system within a large, geographically distributed industry (the National Coal Board) prompted an investigation into currently available packages, the original intention being to purchase the most suitable software and run it on existing computer hardware, alongside existing software systems. It became apparent that none of the available CBL packages were suitable, and a decision was taken to develop an in-house Computer-Assisted Instruction system according to the following criteria: - cheap to run; - easy to author course material; - easy to use; - requires no computing knowledge to use (as either an author or student) ; - efficient in the use of computer resources; - has a comprehensive range of facilities at all levels. This thesis describes the initial investigation, resultant observations and the design, development and implementation of the SCHOOL system. One of the principal characteristics c£ SCHOOL is that it uses a hierarchical database structure for the storage of course material - thereby providing inherently a great deal of the power, flexibility and efficiency originally required. Trials using the SCHOOL system on IBM 303X series equipment are also detailed, along with proposed and current development work on what is essentially an operational CBL system within a large-scale Industrial environment.

The realisation of JSD specifications in object oriented languages

Jackson System Development (JSD) is an operational software development method which addresses most of the software lifecycle either directly or by providing a framework into which more specialised techniques can fit. The method has two major phases: first an abstract specification is derived that is in principle executable; second the specification is implemented using a variety of transformations. The object oriented paradigm is based on data abstraction and encapsulation coupled to an inheritance architecture that is able to support software reuse. Its claims of improved programmer productivity and easier program maintenance make it an important technology to be considered for building complex software systems. The mapping of JSD specifications into procedural languages typified by Cobol, Ada, etc., involves techniques such as inversion and state vector separation to produce executable systems of acceptable performance. However, at present, no strategy exists to map JSD specifications into object oriented languages. The aim of this research is to investigate the relationship between JSD and the object oriented paradigm, and to identify and implement transformations capable of mapping JSD specifications into an object oriented language typified by Smalltalk-80. The direction which the transformational strategy follows is one whereby the concurrency of a specification is removed. Two approaches implementing inversion - an architectural transformation resulting in a simulated coroutine mechanism being generated - are described in detail. The first approach directly realises inversions by manipulating Smalltalk-80 system contexts. This is possible in Smalltalk-80 because contexts are first class objects and are accessible to the user like any other system object. However, problems associated with this approach are expounded. The second approach realises coroutine-like behaviour in a structure called a `followmap'. A followmap is the results of a transformation on a JSD process in which a collection of followsets is generated. Each followset represents all possible state transitions a process can undergo from the current state of the process. Followsets, together with exploitation of the class/instance mechanism for implementing state vector separation, form the basis for mapping JSD specifications into Smalltalk-80. A tool, which is also built in Smalltalk-80, supports these derived transformations and enables a user to generate Smalltalk-80 prototypes of JSD specifications.

Optical properties of some surfaces for solar energy application

The preThe present work is a study of the optical properties of some surfaces, in order to determine their applications in solar energy utilisation. An attempt has been made to investigate and measure the optical properties of two systems of surface moderately selective surfaces like thermally grown oxide of titanium, titanium oxide en aluminium and thermally grown oxides of stainless steel; and, selective surfaces of five different coloured stainless at (INCO surfaces) and of black nickel foil. A calorimetric instrument based on the steady state method for measuring directly the total emittance has been designed. Chapter 1 is an introductory survey of selective surface. It also includes a brief review of various preparation techniques in use since 1955. Chapter 2 investigates the theory of selective surfaces, defining their optical properties and their figures of merit. It also outlines the method of computing the optical properties (i.e. absorptance, a, and emittance, a) which have been adopted for the present work. Chapter 3 describes the measuring technique and the modes of operation of the equipment used in the experimental work carried out. Chapter 4 gives the results of the experimental work to measure the optical properties, the life testing and chemical composition of the surfaces under study. Chapter 5 deals with the experimentation leading to the design of a calorimetric instrument for measuring the total emmitance directly. Chapter 6 presents concluding remarks about the outcome of the present work and some suggestions for further work. sent work is a study of the optical properties of some surfaces, in order to determine their applications in solar energy utilisation. An attempt has been made to investigate and measure the optical properties of two systems of surface moderately selective surfaces like thermally grown oxide of titanium, titanium oxide en aluminium and thermally grown oxides of stainless steel; and, selective surfaces of five different coloured stainless at (INCO surfaces) and of black nickel foil. A calorimetric instrument based on the steady state method for measuring directly the total emittance has been designed. Chapter 1 is an introductory survey of selective surface. It also includes a brief review of various preparation techniques in use since 1955. Chapter 2 investigates the theory of selective surfaces, defining their optical properties and their figures of merit. It also outlines the method of computing the optical properties (i.e. absorptance, a, and emittance, a) which have been adopted for the present work. Chapter 3 describes the measuring technique and the modes of operation of the equipment used in the experimental work carried out. Chapter 4 gives the results of the experimental work to measure the optical properties, the life testing and chemical composition of the surfaces under study. Chapter 5 deals with the experimentation leading to the design of a calorimetric instrument for measuring the total emmitance directly. Chapter 6 presents concluding remarks about the outcome of the present work and some suggestions for further work.

The evaluation and development of the lead authority partnership scheme as a central intervention strategy for health and safety enforcement by local authorities

The research comprises a suite of studies that examines and develops the Lead Authority Partnership Scheme (LAPS) as a central intervention strategy for health and safety by local authority (LA) enforcers. Partnership working is a regulatory concept that in recent years has become more popular but there has been little research conducted to investigate, explore and evaluate its practical application. The study reviewed two contrasting approaches to partnership working between LAs and businesses, both of which were intended to secure improvements in the consistency of enforcement by the regulators and in the health and safety management systems of the participating businesses. The first was a well-established and highly prescriptive approach that required a substantial resource commitment on the part of the LA responsible for conducting a safety management review (SMR) of the business. As a result of his evaluation of the existing ‘full SMR’ scheme, the author developed a second, more flexible approach to partnership working. The research framework was based upon a primarily qualitative methodology intended to investigate and explore the impact of the new flexible arrangements for partnership working. The findings from this study of the flexible development of the scheme were compared and contrasted with those from studies of the established ‘full SMR’ scheme. A substantial degree of triangulation was applied in an attempt to strengthen validity and broaden applicability of the research findings. Key informant interviews, participant observation, document/archive reviews, questionnaires and surveys all their particular part to play in the overall study. The findings from this research revealed that LAPS failed to deliver consistency of LA enforcement across multiple-outlet businesses and the LA enforced business sectors. Improvement was however apparent in the safety management systems of the businesses participating in LAPS. Trust between LA inspector and safety professional was key to the success of the partnerships as was the commitment of these key individuals. Competition for precious LA resources, the priority afforded to food safety over health and safety, the perceived high resource demands of LAPS, and the structure and culture of LAs were identified as significant barriers to LA participation. Flexible approaches, whilst addressing the resource issues, introduced some fresh concerns relating to credibility and delivery. Over and above the stated aims of the scheme, LAs and businesses had their own reasons for participation, notably the personal development of individuals and kudos for the organisation. The research has explored the wider implications for partnership working with the overall conclusion it is most appropriately seen as a strategic level element within a broader structured intervention strategy.

The pore system and engineering properties of hardened cement paste

The work described in this thesis is an attempt to elucidate the relationships between the pore system and a number of engineering properties of hardened cement paste, particularly tensile strength and resistances to carbonation and ionic penetration. By examining aspects such as the rate of carbonisation, the pore size distribution, the concentration of ions in the pore solution and the phase composition of cement pastes, relationships between the pore system (pores and pore solution) and the resistance to carbonation were investigated. The study was carried out in two parts. First, cement pastes with different pore systems were compared, whilst secondly comparisons were made between the pore systems of cement pastes with different degrees of carbonation. Relationships between the pore structure and ionic penetration were studied by comparing kinetic data relating to the diffusion of various ions in cement pastes with different pore systems. Diffusion coefficients and activation energies for the diffusion process of Cl- and Na+ ions in carbonated and non-carbonated cement pastes were determined by a quasi-steady state technique. The effect of the geometry of pores on ionic diffusion was studied by comparing the mechanisms of ionic diffusion for ions with different radii. In order to investigate the possible relationship between tensile strength and macroporosity, cement paste specimens with cross sectional areas less than 1mm2 were produced so that the chance of a macropore existing within them was low. The tensile strengths of such specimens were then compared with those of larger specimens.

British racial discourse: a study of political discourse about race and race-related matters at parliamentary and borough council levels

'British Racial Discourse' is a study of political discourse about race and race-related matters. The explanatory theory is adapted from current sociological studies of ideology with a heavy emphasis on the tradition developed from Marx and Engels's Feuerbach. The empirical data is drawn from the parliamentary debates on immigration and the Race Relations Bills, Conservative and Labour Party Conference Reports, and a set of interviews with Wolverhampton Borough councillors. Although the thesis has broader significance for British political discourse about race, it is particularly concerned with the responses of members of the two main political parties, rather than with the more overt and sensational racism of certain extreme Right-wing groups. Indeed, as the study progresses, it focuses more and more narrowly on the phenomenon of 'deracialised' discourse, and the details of the predominantly class-based justificatory systems of the Conservative and Labour Parties. Of particular interest are the argument forms (used in the debates on immigration and race relations) which manage to obscure the white electorate's responsibility for prejudice and discrimination. Such discoursive forms are of major significance for understanding British race relations, and their detailed examination provides an insight into the way in which 'ideological facades' are created and maintained.

Aspects of tonic accommodation and tonic vergence

Under conditions of reduced visual stimulation, the systems of accommodation and vergence tend towards physiological resting states that are intermediate within their functional range. The terms tonic accommodation (TA) and tonic vergence (TV) are used in the study to describe these stimulus-free, intermediate adjustments and to represent the systems as being in a state of innervational tonicity. The literature relating to TA and TV and the various experiments of this thesis are reviewed. Methodology has been developed enabling the determination of TA and TV under conditions of total darknessl laser optometry for TA and ~ernier-alignment for TV. The thesis describes a series of experiments designed to investigate various aspects of TA and TV, and their role in ametropia, binocular vision and their adaptation to sustained visual tasks. Measurements of TA were also utilised to investigate the effect of various autonomic effector drugs on the ciliary muscle. The effects of ethanol on binocular function are shown to be directly proportional to the .initial level of TVJ which is itself unaffected. These results support the concept of TV as the reference point for normal vergence responses. The results of the pharmacological investigations indicate the presence of a small but significant, beta-receptor mediated inhibitory sympathetic input to the ciliary muscle, and that the wide distribution in TA is a consequence of inter-observer variations in parasympathetic, rather than sympathetic tone. Following interaction with visual tasks of t5mins duration, the levels of TA and TV are found to be biased in the direction of, and proportional to, the task position: except during near-task viewing where the task-to-TA stimulus-distance exceeds 1.5D (for TA) and 3.5deg (for TV). Under these conditions the expected level of bias is attenuated, Adaptive models are discussed, proposing TA and TV as the reference points of the accommodative and vergence system.

Innovative measurement methodology in the study of weathering of automotive coatings

An initial aim of this project was to evaluate the conventional techniques used in the analysis of newly prepared environmentally friendly water-borne automotive coatings and compare them with solvent-borne coatings having comparable formulations. The investigation was carried out on microtuned layers as well as on complete automotive multi-layer paint systems. Methods used included the very traditional methods of gloss and hardness and the commonly used photo-oxidation index (from FTIR spectral analysis). All methods enabled the durability to weathering of the automotive coatings to be initially investigated. However, a primary aim of this work was to develop methods for analysing the early stages of chemical and property changes in both the solvent-borne and water-borne coating systems that take place during outdoor natural weathering exposures and under accelerated artificial exposures. This was achieved by using dynamic mechanical analysis (DMA), in both tension mode on the microtomed films (on all depths of the coating systems from the uppermost clear-coat right down to the electron-coat) and bending mode of the full (unmicrotomed) systems, as well as MALDI-Tof analysis on the movement of the stabilisers in the full systems. Changes in glass transition temperature and relative cross-link density were determined after weathering and these were related to changes in the chemistries of the binder systems of the coatings after weathering. Concentration profiles of the UV-stabilisers (UVA and HALS) in the coating systems were analysed as a consequence of migration in the coating systems in separate microtomed layers of the paint samples (depth profiling) after weathering and diffusion co-efficient and solubility parameters were determined for the UV stabilisers in the coating systems. The methods developed were used to determine the various physical and chemical changes that take place during weathering of the different (water-borne and solvent-borne) systems (photoxidation). The solvent-borne formulations showed less changes after weathering (both natural and accelerated) than the corresponding water-borne formulations due to the lower level of cross-links in the binders of the water-borne systems. The silver systems examined were more durable than the blue systems due to the reflecting power of the aluminium and the lower temperature of the silver coatings.

30 years of retail change:where (and how) do you shop?

Purpose – The purpose of this paper is to investigate the extent of retail change in the UK grocery sector over the last 30 years. Design/methodology/approach – In 1980, a press article by Richard Milner and Patience Wheatcroft attempted to anticipate retail change by 1984. Taking that as a template, the paper examines how retail did, in fact, change over a much longer timescale: with some unanticipated innovations in place even by 1984. Reference is made to academic research on grocery retailing in progress at the time and which has recently been revisited. Findings – Although Milner and Wheatcroft tackled the modest task of looking ahead just four years, the content of their article is intriguingly reflective of the retail structure and systems of the UK at the time. Whilst some innovations were not anticipated, the broad themes of superstore power and market regulation still command attention 30 years on. Originality/value – Through reconsidering 30 years of retail change, the paper highlights that with time how do you shop has come to pose at least as interesting a question as where do you shop.

National system of innovation and technological learning:an integrated framework for understanding technological capability development in the Russian forestry sector

One of the issues in the innovation system literature is examination of technological learning strategies of laggard nations. Two distinct bodies of literature have contributed to our insight into forces driving learning and innovation, National Systems of Innovation (NSI) and technological learning literature. Although both literatures yield insights on catch-up strategies of 'latecomer' nations, the explanatory powers of each literature by itself is limited. In this paper, a possible way of linking the macro- and the micro-level approaches by incorporating enterprises as active learning entities into the learning and innovation system is proposed. The proposed model has been used to develop research hypotheses and indicate research directions and is relevant for investigating the learning strategies of firms in less technologically intensive industries outside East Asia.

A comparative analysis of cultural value orientations of Polish and Turkish employees:implications for international human resource management

This study empirically compares and contrasts the cultural value orientations of employees from Poland and Turkey by testing the compatibility of their values in three stages through seven cultural dimensions. The first phase of the study deals with the assessment of inter-country cultural value differences; the second phase investigates the intra-country cultural dynamics between selected demographic groups; and the third phase examines the inter-country cultural differences among the selected demographic groups of employees. The research has been conducted adopting the Maznevski, DiStephano, and Nason's (1995) version of cultural perspectives questionnaire with a sample of 744 (548 Polish and 196 Turkish) respondents. The results show significant cultural differences between Poland and Turkey, a presence of cultural dynamics among certain demographic groups within the country, and a mixture of convergence and divergence in the value systems of certain demographic groups both within and between the two nation(s). The research findings convey important messages to international human resource strategists in order for them to employ an effective and rational employment policy and business negotiation approach(es) to effectively operate in these countries. It also highlights that diversity of cultural values not only requires viewing each of them through cultural dimensions at a macro-level with a cross-country reference, but also requires monitoring their dynamics at the micro-level with reference to controlled demographic groups. © 2013 Taylor & Francis.

The role of models@run.time in supporting on-the-fly interoperability

Models at runtime can be defined as abstract representations of a system, including its structure and behaviour, which exist in tandem with the given system during the actual execution time of that system. Furthermore, these models should be causally connected to the system being modelled, offering a reflective capability. Significant advances have been made in recent years in applying this concept, most notably in adaptive systems. In this paper we argue that a similar approach can also be used to support the dynamic generation of software artefacts at execution time. An important area where this is relevant is the generation of software mediators to tackle the crucial problem of interoperability in distributed systems. We refer to this approach as emergent middleware, representing a fundamentally new approach to resolving interoperability problems in the complex distributed systems of today. In this context, the runtime models are used to capture meta-information about the underlying networked systems that need to interoperate, including their interfaces and additional knowledge about their associated behaviour. This is supplemented by ontological information to enable semantic reasoning. This paper focuses on this novel use of models at runtime, examining in detail the nature of such runtime models coupled with consideration of the supportive algorithms and tools that extract this knowledge and use it to synthesise the appropriate emergent middleware.

Electronics:a case study of economic value added in target costing

Whilst target costing and strategic management accounting (SMA) continue to be of considerable interest to academic accountants, both suffer from a relative dearth of empirically based research. Simultaneously, the subject of economic value added (EVA) has also been the subject of little research at the level of the individual firm.The aim of this paper is to contribute to both the management accounting and value based management literatures by analysing how one major European based MNC introduced EVA into its target costing system. The case raises important questions about both the feasibility of cascading EVA down to product level and the compatibility of customer facing versus shareholder focused systems of performance management. We provide preliminary evidence that target costing can be used to align both of these perspectives, and when combined with other SMA techniques it can serve as " the bridge connecting strategy formulation with strategy execution and profit generation" ( Ansari et al., 2007, p. 512). © 2012 Elsevier Ltd.