Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Gestão Técnica Centralizada em Edifícios da Força Aérea

A investigação centra-se na aplicação da Gestão Técnica Centralizada como instrumento para a melhoria da eficiência energética dos edifícios e infraestruturas da Força Aérea Portuguesa e diminuição de pessoal afeto à sua manutenção, tendo por base, dois casos de estudo, o edifício QC12 do Centro de Formação Militar e Técnica da Força Aérea e o ECOTERMOLAB, pertencente ao Instituto de Soldadura e Qualidade. Da análise desenvolvida conclui-se que o funcionamento dos edifícios ECOTERMOLAB e QC12, com controlo por GTC, representam anualmente uma diminuição de consumo energético em 30% e 44% respetivamente e, uma redução de 50% nos recursos humanos afetos à instalação do QC12. Da viabilidade económica obtiveram-se as métricas de Valor Atual Líquido e a Taxa Interna de Rentabilidade positivos e um Período de Recuperação do Investimento, de 11,5 anos para ECOTERMOLAB e 10,7 anos para QC12. Por fim, teceram-se algumas recomendações, dirigidas à Força Aérea Portuguesa, com o intento de melhorar a eficiência energética elétrica e a redução de recursos humanos afetos. Abstract: The research is focused in the application of the Centered Technique Management as an instrument to improve the Portuguese Air Force buildings and infrastructures’ energetic efficiency and to reduce the staff in charge of its maintenance, based on two study cases, QC 12 building in The Air Force Military and Technique Training Center and ECOTERMOLAB, which belongs to Instituto de Soldadura e Qualidade (Quality and Welding Institute). From the analysis, one can conclude that the functioning of the ECOTERMOLAB and QC12 buildings, with GTC control, represents an annual consumption of less 30% and 44% respectively and a 50% reduction in the human resources of the QC 12. From the economical viability, it was possible to get the figures of the Net Present Value and the Internal Rate of Return and a Period of Return on Investment of 11,5 years for ECOTERMOLAB and 10,7 years for QC 12. Finally, some recommendations to the Portuguese Air Force were made, aiming the improvement of the electrical energetic efficiency and a reduction in human resources.

Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Preenchimento de cavidades provenientes de remoção de trinca em turbinas hidráulicas por meio do processo GMAW-P

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Mecânica, 2016.

Freedom from equine infectious anaemia virus infection in Spanish Purebred horses

Introduction: No cases of equine infectious anaemia (EIA) have been reported in Spain since 1983. Factors that could increase the risk of reintroducing equine infectious anaemia virus (EIAV) into Spain include the recent occurrence of the disease in Europe and the absence of compulsory serological testing before importation into Spain. Aims and objectives: Given the importance of the Spanish Purebred (SP) horse breeding industry in Spain, the aim of this cross-sectional study was to provide evidence of freedom from EIAV in SP stud farms in Central Spain. Materials and methods: Serum samples from 555 SP horses, collected between September 2011 and November 2013, were tested using a commercially available EIAV ELISA with a published sensitivity of 100 per cent. Results: All 555 samples were negative for antibody to EIAV, providing evidence of a true EIAV seroprevalence between 0 per cent and 0.53 per cent (95% CIs of the sensitivity and specificity of the ELISA technique used Q10 were 100 per cent and 99.3 per cent, respectively) among the SP breeding population in Central Spain. Conclusions: These findings should serve to increase confidence when exporting SP horses to other countries.

Modelling and simulations of ductile iron solidification-induced variations in mechanical behaviour on component and microstructural level

The mechanical behaviour and performance of a ductile iron component is highly dependent on the local variations in solidification conditions during the casting process. Here we show a framework which combine a previously developed closed chain of simulations for cast components with a micro-scale Finite Element Method (FEM) simulation of the behaviour and performance of the microstructure. A casting process simulation, including modelling of solidification and mechanical material characterization, provides the basis for a macro-scale FEM analysis of the component. A critical region is identified to which the micro-scale FEM simulation of a representative microstructure, generated using X-ray tomography, is applied. The mechanical behaviour of the different microstructural phases are determined using a surrogate model based optimisation routine and experimental data. It is discussed that the approach enables a link between solidification- and microstructure-models and simulations of as well component as microstructural behaviour, and can contribute with new understanding regarding the behaviour and performance of different microstructural phases and morphologies in industrial ductile iron components in service.

Early stage assessment of the inspectability of welded components : A case from the aerospace industry

This paper proposes a method to indicate potential problems when planning dye penetrant and x-ray inspection of welded components. Inspection has been found to be an important part of the manufacturability evaluation made in a large CAD-based parametric environment for making multidisciplinary design simulations in early stages of design at an aircraft component manufacturer. The paper explains how the proposed method is to be included in the design platform at the company. It predicts the expected probability of detection of cracks (POD) in situations where the geometry of the parts is unfavourable for inspection so that potential problems can be discovered and solved in early stages. It is based on automatically extracting information from CAD-models and making a rule-based evaluation. It also provides a scale for how favourable the geometry is for inspection. In the paper it is also shown that the manufacturability evaluation need to take into consideration the expected stresses in the structures, highlighting the importance of multi-disciplinary simulations.

Asociación de las violencias física, sexual y comunitaria con el embarazo en adolescentes: análisis multinivel

Objetivos Determinar si existe asociación entre la exposición a violencia, experimentada a nivel individual o municipal, y el embarazo adolescente en mujeres Colombianas entre 13 y 19 años de edad que contestaron la Encuesta de Demografía y Salud en el año 2010. Métodos Estudio de corte transversal, nacional y multinivel. Se tomaron datos de dos niveles jerárquicos: Nivel- 1: Datos individuales de una muestra representativa de 13.313 mujeres entre 13 y 19 años de edad provenientes de La Encuesta Nacional de Demografía y Salud del año 2010 y Nivel- 2: Datos municipales de 258 municipios provenientes de las estadísticas vitales del DANE. Resultados La prevalencia del embarazo adolescente fue del 16.8% IC 95% [16.2-17.4]. El análisis mostró que la asociación entre embarazo adolescente y violencia tanto individual, representada como violencia sexual [OR= 6.99 IC99% 4.80-10.10] y violencia física [OR= 1.74 IC99% 1.47-2.05] así como la violencia municipal medida con tasas de homicidios altas [OR= 1.99 IC99% 1.29-3.07] y muy altas [OR= 2.10 IC99% 1.21-3.61] se mantuvo estadísticamente significativa después de ajustar por las variables: Edad [OR= 1.81 IC99% 1.71-1.91], ocupación [OR= 1.62 IC99% 1.37-1.93], educación primaria o sin educación [OR= 2.20 IC99% 1.47-3.30], educación secundaria [OR= 1.70 IC99% 1.24-2.32], asistir al colegio [OR= 0.18 IC99% 0.15-0.21], conocimiento en la fisiología reproductiva [OR= 1.28 IC99% 1.06-1.54], el índice de riqueza Q1, Q2, Q3 [OR= 2.18 IC99% 1.42-3.34], [OR= 2.00 IC99% 1.39-2.28], [OR= 1.82 IC99% 1.92-2.25] y alto porcentaje de Necesidades básicas insatisfechas a nivel municipal [OR= 2.34 IC99% 1.55-3.52]. Conclusiones Este estudio mostró una relación significativamente estadística entre la violencia sexual y física con el inicio de relaciones sexuales y embarazo adolescente después de controlar por factores sociodemográficos y conocimientos en reproducción sexual en mujeres colombianas de 13 a 19 años en el año 2010. Esta asociación debe continuar siendo estudiada para lograr optimizar las estrategias de prevención y disminuir la tasa actual de embarazos adolescentes en el país y sus consecuencias.

Incidencia de la gestión de Frontex y el gobierno italiano en la acentuación de la crisis humanitaria de la Isla de Lampedusa entre 2011 y 2015

El presente estudio de caso busca examinar la incidencia de las medidas migratorias de control fronterizo implementadas por el Frontex y el gobierno Italiano en las condiciones mínimas de supervivencia de los migrantes irregulares, económicos y solicitantes de asilo en la Isla de Lampedusa, en el periodo 2011-2015. De esta manera, se identifican las medidas migratorias de control fronterizo implementadas por Frontex y el gobierno Italiano. Se examina la situación de la seguridad humana en la crisis migratoria de la Isla, y se analiza la relación entre las medidas migratorias de control fronterizo y las condiciones mínimas de supervivencia de los migrantes. El resultado de la investigación permite plasmar, las consecuencias negativas que han tenido las medidas migratorias en cuanto a las condiciones mínimas de supervivencia, lo que ha desembocado en una crisis humanitaria.

Incidencia de síndrome de abstinencia secundario a opioides y/o benzodiacepinas en dos unidades de cuidados intensivos pediátricos

• Introducción: El síndrome de abstinencia (SA) es el conjunto de síntomas y signos que se producen al suspender bruscamente la administración de un fármaco una vez se haya establecido dependencia física. • Objetivos: Caracterizar los pacientes que presentan SA secundario a opiodes (OP) y/o benzodiacepinas(BZ) durante la hospitalización en las unidades de cuidados intensivos pediátricos de la Clínica Infantil Colsubsidio (CIC) y Hospital del Niño de Panamá (HDN) del 1 de abril al 30 de septiembre del 2016. • Materiales y métodos: se realizó un estudio descriptivo, longitudinal, prospectivo. Incluimos 189 pacientes en la CIC y 144 pacientes en el HDN. Se utilizó la escala SOPHIA para el diagnóstico de SA, las escalas COMFORT para evaluar la sedación en pacientes ventilados no relajados y la escala FLACC para evaluar la analgesia. Se utilizó software StataV12® para el análisis estadístico. • Resultados: se reportó una incidencia global de SA de 6.1/100 días personas. La incidencia acumulada de SA fue de 56.08% y 29.86% para la CIC y el HDN respectivamente. En la CIC el 69.81% de los pacientes que requirieron infusión de OP y BZ desarrollaron SA. Se reportó una dosis acumulada de fentanyl de 530.34 ± 276.49 mcg/kg. Con respecto al HDN, de los pacientes que recibieron opioides y benzodiacepinas el 53.49 % desarrollaron SA. • Conclusión: El SA secundario a opioides y/o benzodiacepinas es frecuente en nuestras unidades con una incidencia variable, es mayor la presentación del SA al usar ambos fármacos, mayores dosis acumuladas y más días de infusión continua.

Fracture toughness characterization of aluminium-epoxy adhesive joints reinforced with electrospun Nylon 6,6 nanofibers

The use of adhesives to join two different substrates is an efficient replacement to classic joining technologies such as welding and soldering. One the one hand adhesion has different advantages over those techniques such as an improved stress distribution and the potential weight reduction of the structure; on the other hand, two of the most important drawbacks are a relatively low fracture toughness and the need of an accurate surface preparation. These two aspects will be accurately analysed in the present work: the use of Nylon nanofibers as reinforcement for the adhesive should increase fracture toughness, while a surface preparation method consisting of mechanical and chemical treatments will be developed. After the specimens are produced, they will be tested in mode I fracture using a DCB (Double Beam Cantilever) test, which allows to measure the fracture toughness during crack propagation. At the end of the test, the surfaces of the adherends will be visually observed and SEM (Scanning Electronic Microscope) analysed in order to evaluate if adhesive or cohesive fracture occurred, and thus if surface treatments has been well developed to allow a better adhesive-aluminium joining.

Stress Concentration Factor and Fatigue Life Evaluation in offshore tubular KT-Joints

In the last few decades, offshore field has grown fast especially after the notable development of technologies, explorations of oil and gas in deep water and the high concern of offshore companies in renewable energy mainly Wind Energy. Fatigue damage was noticed as one of the main problems causing failure of offshore structures. The purpose of this research is to focus on the evaluation of Stress Concentration Factor and its influence on Fatigue Life for 2 tubular KT-Joints in offshore Jacket structure using different calculation methods. The work is done by using analytical calculations, mainly Efthymiou’s formulations, and numerical solutions, FEM analysis, using ABAQUS software. As for the analytical formulations, the calculations were done according to the geometrical parameters of each method using excel sheets. As for the numerical model, 2 different types of tubular KT-Joints are present where for each model 5 shell element type, 3 solid element type and 3 solid-with-weld element type models were built on ABAQUS. Meshing was assigned according to International Institute of Welding (IIW) recommendations, 5 types of mesh element, to evaluate the Hot-spot stresses. 23 different types of unitary loading conditions were assigned, 9 axial, 7 in-plane bending moment and 7 out-plane bending moment loads. The extraction of Hot-spot stresses and the evaluation of the Stress Concentration Factor were done using PYTHON scripting and MATLAB. Then, the fatigue damage evaluation for a critical KT tubular joint based on Simplified Fatigue Damage Rule and Local Approaches (Strain Damage Parameter and Stress Damage Parameter) methods were calculated according to the maximum Stress Concentration Factor conducted from DNV and FEA methods. In conclusion, this research helped us to compare different results of Stress Concentration Factor and Fatigue Life using different methods and provided us with a general overview about what to study next in the future.

Development of a robotic system for switchgear cabling

Industrial robots are an inalienable part of modern automated production. Typical applications of robots include welding, painting, (dis)assembly, packaging, labeling, palletizing, pick and place and others. Many of that applications includes object manipulation. If the shape and position of the object are known in advance, it is possible to design the trajectory of the robot’s end-effector to take and place. Such a strategy is applicable for rigid objects and widely used in the manufacturing field. But flexible (deformable) objects can change their shape and position upon contact with the robot’s end-effector or environment. That is the reason why the general approach is unacceptable. It means that the robot can fail to grasp such an object and can’t place it in the desired position. This thesis has addressed the problem of cable manipulation by bilateral robotic setup for the industrial manufacturing of electrical switchgear. The considered solution is based on the idea of tensioned cable. If the cable was grasped by the ends and tensioned, it has a line shape. Since the position of the robot’s end-effectors known, the position of the cable is known as well. Such an approach is capable to place cable in cable ducts of switchgear. The considered solution has been tested experimentally on a real bilateral robotic setup.