Efeito da densidade de semeadura na produção do amendoim

In this work, the effects of sowing densities on peanut (Arachis hypogaea L.) crop, cv. Tatu were studied. Three experiments were carried out under field conditions on a soil classified as ''Latosol Roxo'', in the Municipality of Pontal, SP, during the wet seasons of 1987-88, 1988-89, and 1989-90. The densities studied were 7, 10, 13, 16, 19, 22, 25, and 28 seeds in one metter of row, under some row spacing of 0.60 m. The pod number per plant was the yield component responsible for the variation of pod production per plant and these decreased with the increase of sowing density. However. The low pod production per plant in high densities of sowing was compensated by the high populations of plants and these produced high yield. Thus, good pod yields were obtained, without significant losses of yield compared with the higher densities, at density of 13 seeds per meter, in 1987-88, 16 seeds per meter in 1988-89 and 10 seeds per meter in 1989-90, that resulted, respectively, in 11.36, 12.72 and 9.28 plants per meter at harvest time.

New layered double hydroxides intercalated with substituted pyrroles. 1. In situ polymerization of 4-(1H-pyrrol-1-yl)benzoate

The two-dimensional hybrid organic-inorganic materials Zn-2-Cr and Zn-2-Al-LDHs (Layered Double Hydroxides) containing 4-(1H-pyrrol-1yl)benzoate anions as the interlayer anions were synthesized by the co-precipitation method at constant pH followed by subsequent hydrothermal treatment for 72 h. The materials were characterized by PXRD, C-13 CP-MAS NMR, ESR, TGA, and TEM. The basal spacing found by the X-ray diffraction technique is coincident with the formation of bilayers of the intercalated anions. Solid-state C-13 NMR and ESR data strongly suggest the partial in situ polymerization of the 4-(1H-pyrrol-1yl)benzoate anions during coprecipitation. (c) 2006 Elsevier Ltd. All rights reserved.

New layered double hydroxides intercalated with substituted pyrroles. 2. 3-(Pyrrol-1-yl)-propanoate and 7-(pyrrol-1-yl)-heptanoate LDHs

We report the synthesis and characterization of organic-inorganic hybrid materials: Zn-2-Al-LDHs (layered double hydroxides) containing 3-(1H-pyrrol-1-yl)-propanoate and 7-(1H-pyrrol-l-yl)-heptanoate as the interlayer anions. The LDHs were synthesized by the co-precipitation method at constant pH followed by hydrothermal treatment for 72 h. The materials were characterized by PXRD, C-13 CP-MAS NMR, TGA, and ESR. The basal spacing found by PXRD technique is coincident with the formation of bilayers of the intercalated anions. The solid state C-13 NMR showed that the interlayered anions remain identical after intercalation. ESR data suggest that the monomers connect each other in a limited number of guests when a thermal treatment is applied. The inorganic LDH sheets delay the temperature of degradation of the monomers. (c) 2006 Elsevier Ltd. All rights reserved.

Effect of tillage on fractal indices describing soil surface microrelief of a Brazilian Alfisol

Soil surface roughness is known to influence water infiltration, runoff and erosion. Soil surface roughness changes with management and weather and its mathematical description still remains an important issue. The main objective of this study was to investigate the effect of tillage on the two fractal indices, fractal dimension, D, and crossover length, 1, currently used in characterizing soil surface microrelief. The statistical index random roughness, RR, was also assessed. Field experiments were done on an Alfisol located at Rio Grande do Sul State (Brazil). Two tillage treatments (conventional versus direct drilling) were tested. The soil surface microrelief was assessed by point elevation measurements in 16 plots for each treatment. The sampling scheme was a square grid with 20 x 20 mm between point spacing and the plot size was 280 x 280 mm, so that each data set consisted of 225 individual elevation points. All indices were calculated after trend removal, both by slope correction, i.e., oriented microrelief, and by slope plus tillage marks correction, i.e., random microrelief. The implemented algorithm for estimating D and 1 consisted in evaluating the roughness around the local root mean square deviation (RMS) of the point elevation values. Irrespective of tillage treatment and detrending procedure, fractal behavior extended only over a bounded range of scales, from 40 to 100 mm, due to the experimental setup. In these conditions, assessing fractal indices was not always straightforward. The statistical index RR and the fractal index I were significantly different between tillage treatments for oriented and random surface conditions. D values of random soil surfaces were not affected by tillage treatment, whereas D values of oriented microrelief were significantly lower in the direct drilled plots. Removal of tillage marks trend resulted in a significant increase in D values. Within each tillage treatment, 1 and D were significantly correlated. (c) 2006 Elsevier B.V. All rights reserved.

Nitrogen redistribution to sorghum grains as affected by plant competition

An experiment was conducted to study nitrogen absorption and translocation in grain sorghum plants during their reproductive growth. Sorghum was grown in four row spacings: 50 and 70 cm in single rows, 80 and 120 cm in double rows 20 cm apart. Plant populations were 71000, 142000 and 213000 plants/ha. After flowering, samples were taken at 12 day intervals, and the plants were divided into grains and stover, where N was analyzed. There was an increase in N concentration in lower plant populations and in wider row spacings. However, total nitrogen accumulation (in kg/ha) increased as the number of plants was increased. In the vegetative parts of the plants there were higher N concentrations in lower populations showing that there was a higher N absorption and a lower translocation to the grains. When grain sorghum was grown in 50 cm rows, there was a high N accumulation, a high N translocation to the grains and the highest yield. This row spacing led to the highest N use efficiency.

Cracks developed during SrTiO3 thin-film preparation from polymeric precursors

Strontium titanate (SrTiO3) thin films were prepared by dip-coating Si(111) single-crystal substrates in citrate solutions of ethylene glycol, considering several citric acid/ethylene glycol (CA/EG) ratios. Measurements of intrinsic viscosity indicate that increasing the amount of EG increases the precursors' polymeric chains and increases the weight loss. After deposition the substrates were dried on a hotplate (approximate to 150 degrees C); this was followed by heat treatment at temperatures ranging from 500 to 700 degrees C using heating and cooling rates of 1 degrees C min(-1). SEM and optical microscopy investigations of the sintered films obtained from different CA/EG ratios indicate that there is a critical thickness above which the films present cracks. This critical thickness for SrTiO3 films deposited on the Si(111) substrate is about 150 nm, Measurements of crack spacing as a function of film thickness indicate that the origin of cracks cannot be explained by the elastic behavior of the film but rather by the viscoelastic relaxation of the film during pyrolysis and sintering. Copyright (C) 1999 John Wiley & Sons, Ltd.

Chondroitin sulfate proteoglycans are structural renewable constituents of the rabbit vitreous body

Purpose: To characterize the vitreous intrinsic proteoglycans, investigate their dynamics, and examine their role in the supramolecular organization of the vitreous. Methods: Vitreous from normal rabbits was collected and processed for observation with the transmission electron microscope after treatment with glycosidases. Also, rabbits were injected intravitreally with [S-35]-sodium sulfate and sacrificed at several time intervals after the injection. Proteoglycans (PGs) were assayed in the vitreous supernatant or in whole samples extracted with guanidine hydrochloride by polyacrylamide or agarose gel electrophoresis, followed respectively by fluorography or autoradiography, and ion-exchange chromatography and gel-filtration chromatography, combined with glycolytic treatment of the samples. The sulfated glycosaminoglycans (GAGs) were characterized by agarose gel electrophoresis after treating vitreous samples with protease and specific glycosidases. Results: the electron microscopic study revealed a network with hyaluronic acid ( HA) as thin threads coating and connecting collagen fibrils. The elimination of the HA coat showed chondroitin sulfate granules (8-25 nm) arranged at regular intervals on the fibril surface. The chondroitinase ABC digestion, besides removing the granules, also caused the formation of thicker bundles of the collagen fibrils. The PG and GAG analysis indicated that there are three renewable PGs in the vitreous ( e. g., one heparan-and two chondroitin-sulfate ones). Conclusions: At least one of the chondroitin sulfate PGs is involved in the interactions that occur in the vitreous structure, mainly by providing adequate spacing between the collagen fibrils, a condition that is probably required for the transparency of the vitreous.

Synthesis, characterization and electrochemical study of layered double hydroxides intercalated with 2-thiophenecarboxylate anions

The synthesis, characterization, and electrochemical study of the Zn(II)-Al(III) and Zn(II)-Cr(III) Layered Double Hydroxides (LDHs) containing 2-thiopenecarboxylate as the interlayer anions are described. The LDHs were prepared by the constant pH coprecipitation technique followed by hydrothermal treatment for 72 h. The materials were analyzed by PXRD, FT-IR, C-13 CP-MAS, EDX, TEM, and CV. The presence of the organic heterocyclic anions was confirmed by FT-IR and the related solid-state C-13 NMR data strongly suggested that these were dimerised during coprecipitation. Accordingly, the basal spacing found by the X-ray technique was similar to 15.3 Angstrom, a distance coincident with the formation of bilayers of the intercalated anions. The structural organization of all the new materials was greatly enhanced by hydrothermal treatment, as shown by PXRD. The improved organization of the bilayered structures had a strong influence in the electrochemical behaviour of clay-modified electrodes produced with these materials, such as the diminished resistance to the ionic flow through the LDHs films. (C) 2003 Elsevier Ltd. All rights reserved.

Effects of processing on the structure of zein/oleic acid films investigated by X-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 angstrom, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5.angstrom d-spacing remained stable under processing while the 10 angstrom d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 angstrom) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods.

Tolerância de diferentes cultivares de cana-de-açúcar (Saccharum spp.) a herbicidas

This work aimed to evaluate the tolerance of sugarcane cultivars to sulfentrazone, imazapic, isoxaflutole, clomazone and ametryn + trifloxysulfuron-sodium. The experiment was arranged in a randomized block design in a split-plot scheme. The cultivars were allocated to the plots and the herbicides to the sub-plots (five 8.0 m long rows and 1.5 m spacing, with 4 repetitions. The herbicides sulfentrazone (0.8 kg ha(-1)), imazapic (0.147 kg ha(-1)), isoxaflutole (0.1125 kg ha(-1)), clomazone (1.1 kg ha(-1)), ametryn (1.463 kg ha(-1)) + trifloxysulfuron sodium (0.037 kg ha-1) and control were evaluated on 3-yr-old ratoons of the cultivars IACSP94-2094, IACSP94-2101, IACSP93-3046, IACSP94-4004, IAC86-2480 and RB72454 in post emergence. The traits evaluated were: plant toxicity symptoms in the plant leaves; total chlorophyll content and photochemical efficiency (Fv/Fm) at 15, 30 and 60 days after application (DAA); height (cm) at 30 and 270 DAA, and plant stand (stalk m(-1)) at 30 and 180 DAA. Diameter (cm), estimated productivity (t ha(-1)) and quality analysis were evaluated at 270 DAA. The sugarcane cultivars IACSP94-2094, IACSP93-3046, IACSP94-4004, IAC86-2480, RB72454, and IACSP94-2101 especially, were susceptible to clomazone up to 30 DAA, due to leaf chlorosis and lower chlorophyll content, but had no effect on quality characteristics and productivity. The cultivars were also tolerant to other herbicides.

Crescimento e produtividade da mamona de porte baixo em diferentes espaçamentos e populações de plantas

It is necessary to establish adequate row spacings and plant populations for recently developed short height castor (Ricinus communis L) cultivars. This work aimed to evaluate the growth, yield components, and yield of short castor cultivar IAC 2028 as affected by row spacing and plant population, in summer cropping season. The experiments were carried out in 2007/08 and 2008/09 cropping seasons, in Botucatu County, São Paulo State, Brazil. A randomized complete block design in a split-plot scheme with four replications was used. Treatments assigned to plots were four row spacing (0.45, 0.60, 0.75, and 0.90m) and subplots were assigned to four levels of plant populations (25000, 40000, 55000, and 70000 plants/ha). The increase of plant population decreased plants survival rate, shoot dry weight, stem diameter, number of racemes per plant, number of fruits per raceme, and 100-grains weight. In higher plant populations, the best arrangement of plants, provided by the narrower row spacing (0.45m), promoted higher grain and oil yields. Increasing plant population increased grain and oil yields only when was used the narrower row spacing.

Vernalização e corte do terço apical dos bulbos na produção e qualidade de sementes de cebola

The onion (Allium cepa L.) belongs to the family Alliaceae, and the second vegetables in economic importance. It horticultural culture of high relevance, in central-south and in the far south, is highlighting the states of São Paulo, Rio Grande do Sul, Santa Catarina and Parana. The bulbificacion only begins when the combination of the determinants of bulbificacion (photoperiod and temperature) of each cultivar is reached. It Can be grown in tropical regions with the use of vernalization of the bulbs. The objective of this study is to identify the efficiency in the production of seed, onion depending on the cut or not the bulb before the period of vernalization. The analysis of the variables consisted: humidity; number of seeds; mass of seeds for umbel; umbels number; number of seeds for umbel; total number of flowers and of fecundated flowers; number of seeds for capsule; total mass of seeds; emergency percentage; vigor percentage; index of emergency speed and mass of 100 seeds humidity; number of seeds; mass of seeds for umbel; umbels number; number of seeds for umbel; total number of flowers and of fecundated flowers; number of seeds for capsule; total mass of seeds; emergency percentage; vigor percentage; index of emergency speed and mass of 100 seeds, using the cultivars Baia Periforme and Texas Grano. The experimental design was randomized blocks with four replicates, there was 80 plants for replicate, each parcel was conduced with 20 plants distributed in 4 lines of 5 plants with spacing of 20cm between plants and lines which was avaliated the 6 central plants. The seeds production not variated between cultivars Texas Grano e Baia Periforme. The cultivar Texas Grano showed seeds with more physiological quality. The cut or not cut of the bulbs not changed the physiological quality of the seeds. But utilization of whole bulbs resulted more yield of seeds with more flowers number and fertilized flower in Baia Periforme, more value of the total mass of seeds, number of seeds by plant and number and mass of seed by umbel in two cultivars.

Weed-soybean interference studies in Brazil

Recently, a notable shift in weed patterns has occurred in some soybean growing regions, as a result of tillage system change and herbicide use. The weed communities are very diversified and strongly interfere with soybean growth and productivity, especially when the shading of superior leaves of the canopy occurs. Some changes to certain agricultural practices, such as cultivars, row spacing and sowing density, were studied and were considered suitable for the establishment of an integrated weed management system under Brazilian conditions. -from Author

Pore structure characterization of kaolin, metakaolin, and their acid-treated products using small-angle X-ray scattering

Pore structure of dealuminated kaolin and metakaolin was studied by small-angle X-ray scattering (SAXS). Both parent kaolin and metakaolin have about 10% of the total pore volume provided by globular pores with 105 Å mean pore size. Their surface area is about 14 m2/g. Acid dealumination of kaolin causes an increase of its globular pore volume without an appreciable change in the mean pore size, its surface area increasing up to about 90 m2/g. Acid dealumination of metakaolin enhances the globular pore volume, although there is generation of slit-shaped pores with a narrow thickness distribution whose mean value is 14 Å. This interlayer spacing causes an increase in surface area of about 190 m2/g by SAXS. © 1994.

Efeito de diferentes espaçamentos e densidades de semeadura sobre o desenvolvimento do feijoeiro (Phaseolus vulgaris L.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)