Process evaluation of the Texas occupational safety & health surveillance system

Introduction: The Texas Occupational Safety & Health Surveillance System (TOSHSS) was created to collect, analyze and interpret occupational injury and illness data in order to decrease the impact of occupational injuries within the state of Texas. This process evaluation was performed midway through the 4-year grant to assess the efficiency and effectiveness of the surveillance system’s planning and implementation activities1. ^ Methods: Two evaluation guidelines published by the Centers for Disease Control and Prevention (CDC) were used as the theoretical models for this process evaluation. The Framework for Program Evaluation in Public Health was used to examine the planning and design of TOSHSS using logic models. The Framework for Evaluating Public Health Surveillance Systems was used to examine the implementation of approximately 60 surveillance activities, including uses of the data obtained from the surveillance system. ^ Results/Discussion: TOSHSS planning activities omitted the creation of a scientific advisory committee and specific activities designed to maintain contacts with stakeholders; and proposed activities should be reassessed and aligned with ongoing performance measurement criteria, including the role of collaborators in helping the surveillance system achieve each proposed activity. TOSHSS implementation activities are substantially meeting expectations and received an overall score of 61% for all activities being performed. TOSHSS is considered a surveillance system that is simple, flexible, acceptable, fairly stable, timely, moderately useful, with good data quality and a PVP of 86%. ^ Conclusions: Through the third year of TOSHSS implementation, the surveillance system is has made a considerable contribution to the collection of occupational injury and illness information within the state of Texas. Implementation of the nine recommendations provided under this process evaluation is expected to increase the overall usefulness of the surveillance system and assist TDSHS in reducing occupational fatalities, injuries, and diseases within the state of Texas. ^ 1 Disclaimer: The Texas Occupational Safety and Health Surveillance System is supported by Grant/Cooperative Agreement Number (U60 OH008473-01A1). The content of the current evaluation are solely the responsibility of the authors and do not necessarily represent the official views of the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health.^

Design, implementation and evaluation of an unconstrained and contactless biometric system based on hand geometry and stress detection

Esta tesis propone un sistema biométrico de geometría de mano orientado a entornos sin contacto junto con un sistema de detección de estrés capaz de decir qué grado de estrés tiene una determinada persona en base a señales fisiológicas Con respecto al sistema biométrico, esta tesis contribuye con el diseño y la implementación de un sistema biométrico de geometría de mano, donde la adquisición se realiza sin ningún tipo de contacto, y el patrón del usuario se crea considerando únicamente datos del propio individuo. Además, esta tesis propone un algoritmo de segmentación multiescala para solucionar los problemas que conlleva la adquisición de manos en entornos reales. Por otro lado, respecto a la extracción de características y su posterior comparación esta tesis tiene una contribución específica, proponiendo esquemas adecuados para llevar a cabo tales tareas con un coste computacional bajo pero con una alta precisión en el reconocimiento de personas. Por último, este sistema es evaluado acorde a la norma estándar ISO/IEC 19795 considerando seis bases de datos públicas. En relación al método de detección de estrés, esta tesis propone un sistema basado en dos señales fisiológicas, concretamente la tasa cardiaca y la conductancia de la piel, así como la creación de un innovador patrón de estrés que recoge el comportamiento de ambas señales bajo las situaciones de estrés y no-estrés. Además, este sistema está basado en lógica difusa para decidir el grado de estrés de un individuo. En general, este sistema es capaz de detectar estrés de forma precisa y en tiempo real, proporcionando una solución adecuada para sistemas biométricos actuales, donde la aplicación del sistema de detección de estrés es directa para evitar situaciónes donde los individuos sean forzados a proporcionar sus datos biométricos. Finalmente, esta tesis incluye un estudio de aceptabilidad del usuario, donde se evalúa cuál es la aceptación del usuario con respecto a la técnica biométrica propuesta por un total de 250 usuarios. Además se incluye un prototipo implementado en un dispositivo móvil y su evaluación. ABSTRACT: This thesis proposes a hand biometric system oriented to unconstrained and contactless scenarios together with a stress detection method able to elucidate to what extent an individual is under stress based on physiological signals. Concerning the biometric system, this thesis contributes with the design and implementation of a hand-based biometric system, where the acquisition is carried out without contact and the template is created only requiring information from a single individual. In addition, this thesis proposes an algorithm based on multiscale aggregation in order to tackle with the problem of segmentation in real unconstrained environments. Furthermore, feature extraction and matching are also a specific contributions of this thesis, providing adequate schemes to carry out both actions with low computational cost but with certain recognition accuracy. Finally, this system is evaluated according to international standard ISO/IEC 19795 considering six public databases. In relation to the stress detection method, this thesis proposes a system based on two physiological signals, namely heart rate and galvanic skin response, with the creation of an innovative stress detection template which gathers the behaviour of both physiological signals under both stressing and non-stressing situations. Besides, this system is based on fuzzy logic to elucidate the level of stress of an individual. As an overview, this system is able to detect stress accurately and in real-time, providing an adequate solution for current biometric systems, where the application of a stress detection system is direct to avoid situations where individuals are forced to provide the biometric data. Finally, this thesis includes a user acceptability evaluation, where the acceptance of the proposed biometric technique is assessed by a total of 250 individuals. In addition, this thesis includes a mobile implementation prototype and its evaluation.

Guidance for the development of accessibility evaluation tools following the Unified Software Development Process

Automated and semi-automated accessibility evaluation tools are key to streamline the process of accessibility assessment, and ultimately ensure that software products, contents, and services meet accessibility requirements. Different evaluation tools may better fit different needs and concerns, accounting for a variety of corporate and external policies, content types, invocation methods, deployment contexts, exploitation models, intended audiences and goals; and the specific overall process where they are introduced. This has led to the proliferation of many evaluation tools tailored to specific contexts. However, tool creators, who may be not familiar with the realm of accessibility and may be part of a larger project, lack any systematic guidance when facing the implementation of accessibility evaluation functionalities. Herein we present a systematic approach to the development of accessibility evaluation tools, leveraging the different artifacts and activities of a standardized development process model (the Unified Software Development Process), and providing templates of these artifacts tailored to accessibility evaluation tools. The work presented specially considers the work in progress in this area by the W3C/WAI Evaluation and Report Working Group (ERT WG)

Implementation Feasibility of a Digital Nervous System for the Construction Industry: For Efficient and Effective Information Management across the Project Lifecycle

The construction industry has long been considered as highly fragmented and non-collaborative industry. This fragmentation sprouted from complex and unstructured traditional coordination processes and information exchanges amongst all parties involved in a construction project. This nature coupled with risk and uncertainty has pushed clients and their supply chain to search for new ways of improving their business process to deliver better quality and high performing product. This research will closely investigate the need to implement a Digital Nervous System (DNS), analogous to a biological nervous system, on the flow and management of digital information across the project lifecycle. This will be through direct examination of the key processes and information produced in a construction project and how a DNS can provide a well-integrated flow of digital information throughout the project lifecycle. This research will also investigate how a DNS can create a tight digital feedback loop that enables the organisation to sense, react and adapt to changing project conditions. A Digital Nervous System is a digital infrastructure that provides a well-integrated flow of digital information to the right part of the organisation at the right time. It provides the organisation with the relevant and up-to-date information it needs, for critical project issues, to aid in near real-time decision-making. Previous literature review and survey questionnaires were used in this research to collect and analyse data about information management problems of the industry – e.g. disruption and discontinuity of digital information flow due to interoperability issues, disintegration/fragmentation of the adopted digital solutions and paper-based transactions. Results analysis revealed efficient and effective information management requires the creation and implementation of a DNS.

Priority evaluation in transportation policies and programmes

This work is concerned with the development of techniques for the evaluation of large-scale highway schemes with particular reference to the assessment of their costs and benefits in the context of the current transport planning (T.P.P.) process. It has been carried out in close cooperation with West Midlands County Council, although its application and results are applicable elsewhere. The background to highway evaluation and its development in recent years has been described and the emergence of a number of deficiencies in current planning practise noted. One deficiency in particular stood out, that stemming from inadequate methods of scheme generation and the research has concentrated upon improving this stage of appraisal, to ensure that subsequent stages of design, assessment and implementation are based upon a consistent and responsive foundation. Deficiencies of scheme evaluation were found to stem from inadequate development of appraisal methodologies suffering from difficulties of valuation, measurement and aggregation of the disparate variables that characterise highway evaluation. A failure to respond to local policy priorities was also noted. A 'problem' rather than 'goals' based approach to scheme generation was taken, as it represented the current and foreseeable resource allocation context more realistically. A review of techniques with potential for highway problem based scheme generation, which would work within a series of practical and theoretical constraints were assessed and that of multivariate analysis, and classical factor analysis in particular, was selected, because it offerred considerable application to the difficulties of valuation, measurement and aggregation that existed. Computer programs were written to adapt classical factor analysis to the requirements of T.P.P. highway evaluation, using it to derive a limited number of factors which described the extensive quantity of highway problem data. From this, a series of composite problem scores for 1979 were derived for a case study area of south Birmingham, based upon the factorial solutions, and used to assess highway sites in terms of local policy issues. The methodology was assessed in the light of its ability to describe highway problems in both aggregate and disaggregate terms, to guide scheme design, coordinate with current scheme evaluation methods, and in general to improve upon current appraisal. Analysis of the results was both in subjective, 'common-sense' terms and using statistical methods to assess the changes in problem definition, distribution and priorities that emerged. Overall, the technique was found to improve upon current scheme generation methods in all respects and in particular in overcoming the problems of valuation, measurement and aggregation without recourse to unsubstantiated and questionable assumptions. A number of deficiencies which remained have been outlined and a series of research priorities described which need to be reviewed in the light of current and future evaluation needs.

Parent involvement on school advisory councils: A process evaluation at the middle school level

Increasing parental involvement was made an important goal for all Florida schools in educational reform legislation in the 1990's. A forum for this input was established and became known as the School Advisory Council (SAC). To demonstrate the importance of process and inclusion, a south Florida school district and its local teacher's union agreed on the following five goals for SACs: (a) to foster an environment of professional collaboration among all stakeholders, (b) to assist in the preparation and evaluation of the school improvement plan, (c) to address all state and district goals, (d) to serve as the avenue for authentic and representative input from all stakeholders, and (e) to ensure the continued existence of the consensus-building process on all issues related to the school's instructional program. ^ The purpose of this study was to determine to what extent and in what ways the parent members of one south Florida middle school's SAC achieved the five district goals during its first three years of implementation. The primary participants were 16 parents who served as members of the SAC, while 16 non-parent members provided perspective on parent involvement as “outside sources.” Being qualitative by design, factors such as school climate, leadership styles, and the quality of parental input were described from data collected from four sources: parent interviews, a questionnaire of non-parents, researcher observations, and relevant documents. A cross-case analysis of all data informed a process evaluation that described the similarities and differences of intended and observed outcomes of parent involvement from each source using Stake's descriptive matrix model. A formative evaluation of the process compared the observed outcomes with standards set for successful SACs, such as the district's five goals. ^ The findings indicated that parents elected to the SACs did not meet the intended goals set by the state and district. The school leadership did not foster an environment of professional collaboration and authentic decision-making for parents and other stakeholders. The overall process did not include consensus-building, and there was little if any input by parents on school improvement and other important issues relating to the instructional program. Only two parents gave the SAC a successful rating for involving parents in the decision-making process. Although compliance was met in many of the procedural transactions of the SAC, the reactions of parents to their perceived role and influence often reflected feelings of powerlessness and frustration with a process that many thought lacked meaningfulness and productivity. Two conclusions made from this study are as follows: (a) that the role of the principal in the collaborative process is pivotal, and (b) that the normative-re-educative approach to change would be most appropriate for SACs. ^

A study of the implementation of junior college *evaluation system in Taiwan

Since the establishment of the evaluation system in 1975, the junior colleges in the Republic of China (Taiwan), have gone through six formal evaluations. We know that evaluation in schooling, like quality control in businesses, should be a systematic, formal, and a continual process. It can doubtless serve as a strategy to refine the quality of education. The purpose of this research is to explore the current practice of junior college evaluation in Taiwan. This provides insight into the development of and quality of the current evaluation system. Moreover, this study also identified the source of problems with the current evaluation system and provided suggestion for improvements.^ In order to attain the above purposes, this research was undertaken in both theoretical and practical ways. First, theoretically, on the basis of a literature review, the theories of educational evaluation and, according to the course and principles of development, a view of the current practice in Taiwan. Secondly, in practice, by means of questionnaires, an analysis of the views of evaluation committeemen, junior college presidents, and administrators were obtained on evaluation models, methods, contents, organization, functions, criteria, grades reports, and others with suggestions for improvement. The summary of findings concludes that most evaluators and evaluatees think the purpose of evaluation can help the colleges explore their difficulties and problems. In addition, it was found that there is significant difference between the two groups regarding the evaluation methods, contents, organization, functions, criteria, grades reports and others, while analyzing these objective data forms the basis for an improved method of evaluation for Junior Colleges in Taiwan. ^

Parent involvement on school advisory councils: a process evaluation at the middle school level

Increasing parental involvement was made an important goal for all Florida schools in educational reform legislation in the 1990's. A forum for this input was established and became known as the School Advisory Council (SAC). To demonstrate the importance of process and inclusion, a south Florida school district and its local teacher's union agreed on the following five goals for SACs: (a) to foster an environment of professional collaboration among all stakeholders, (b) to assist in the preparation and evaluation of the school improvement plan, (c) to address all state and district goals, (d) to serve as the avenue for authentic and representative input from all stakeholders, and (e) to ensure the continued existence of the consensus-building process on all issues related to the school's instructional program. The purpose of this study was to determine to what extent and in what ways the parent members of one south Florida middle school's SAC achieved the five district goals during its first three years of implementation. The primary participants were 16 parents who served as members of the SAC, while 16 non-parent members provided perspective on parent involvement as "outside sources." Being qualitative by design, factors such as school climate, leadership styles, and the quality of parental input were described from data collected from four sources: parent interviews, a questionnaire of non-parents, researcher observations, and relevant documents. A cross-case analysis of all data informed a process evaluation that described the similarities and differences of intended and observed outcomes of parent involvement from each source using Stake's descriptive matrix model. A formative evaluation of the process compared the observed outcomes with standards set for successful SACs, such as the district's five goals. The findings indicated that parents elected to the SACs did not meet the intended goals set by the state and district. The school leadership did not foster an environment of professional collaboration and authentic decision-making for parents and other stakeholders. The overall process did not include consensus-building, and there was little if any input by parents on school improvement and other important issues relating to the instructional program. Only two parents gave the SAC a successful rating for involving parents in the decision-making process. Although compliance was met in many of the procedural transactions of the SAC, the reactions of parents to their perceived role and influence often reflected feelings of powerlessness and frustration with a process that many thought lacked meaningfulness and productivity. Two conclusions made from this study are as follows: (a) that the role of the principal in the collaborative process is pivotal, and (b) that the normative-re-educative approach to change would be most appropriate for SACs.

Product and Process Innovation: Antecedents and Performance outcomes in small IT firms in India

Innovation is a strategic necessity for the survival of today’s organizations. The wide recognition of innovation as a competitive necessity, particularly in dynamic market environments, makes it an evergreen domain for research. This dissertation deals with innovation in small Information Technology (IT) firms in India. The IT industry in India has been a phenomenal success story of the last three decades, and is today facing a crucial phase in its history characterized by the need for fundamental changes in strategies, driven by innovation. This study, while motivated by the dynamics of changing times, importantly addresses the research gap on small firm innovation in Indian IT.This study addresses three main objectives: (a) drivers of innovation in small IT firms in India (b) impact of innovation on firm performance (c) variation in the extent of innovation adoption in small firms. Product and process innovation were identified as the two most contextually relevant types of innovation for small IT firms. The antecedents of innovation were identified as Intellectual Capital, Creative Capability, Top Management Support, Organization Learning Capability, Customer Involvement, External Networking and Employee Involvement.Survey method was adopted for data collection and the study unit was the firm. Surveys were conducted in 2014 across five South Indian cities. Small firm was defined as one with 10-499 employees. Responses from 205 firms were chosen for analysis. Rigorous statistical analysis was done to generate meaningful insights. The set of drivers of product innovation (Intellectual Capital, Creative Capability, Top Management Support, Customer Involvement, External Networking, and Employee Involvement)were different from that of process innovation (Creative Capability, Organization Learning Capability, External Networking, and Employee Involvement). Both product and process innovation had strong impact on firm performance. It was found that firms that adopted a combination of product innovation and process innovation had the highest levels of firm performance. Product innovation and process innovation fully mediated the relationship between all the seven antecedents and firm performance The results of this study have several important theoretical and practical implications. To the best of the researcher’s knowledge, this is the first time that an empirical study of firm level innovation of this kind has been undertaken in India. A measurement model for product and process innovation was developed, and the drivers of innovation were established statistically. Customer Involvement, External Networking and Employee Involvement are elements of Open Innovation, and all three had strong association with product innovation, and the latter twohad strong association with process innovation. The results showed that proclivity for Open Innovation is healthy in the Indian context. Practical implications have been outlined along how firms can organize themselves for innovation, the human talent for innovation, the right culture for innovation and for open innovation. While some specific examples of possible future studies have been recommended, the researcher believes that the study provides numerous opportunities to further this line of enquiry.