Evaluation of uv spectrophotometry for estimation of nitrite and nitrate in nitrified urine

Water is a limited resource for which demand is growing. Contaminated water from inadequate wastewater treatment provides one of the greatest health challenges as it restricts development and increases poverty in emerging and developing countries. Therefore, the connection between wastewater and human health is linked to access to sanitation and to human waste disposal. Adequate sanitation is expected to create a barrier between disposed human excreta and sources of drinking water. Different approaches to wastewater management are required for different geographical regions and different stages of economic governance depending on the capacity to manage wastewater. Effective wastewater management can contribute to overcome the challenges of water scarcity. Separate collection of human urine at its source is one promising approach that strongly reduces the economic and load demands on wastewater treatment plants (WWTP). Treatment of source-separated urine appears as a sanitation system that is affordable, produces a valuable fertiliser, reduces pollution of water resources and promotes health. However, the technical realisation of urine separation still faces challenges. Biological hydrolysis of urea causes a strong increase of ammonia and pH. Under these conditions ammonia volatilises which can cause odour problems and significant nitrogen losses. The above problems can be avoided by urine stabilisation. Biological nitrification is a suitable process for stabilisation of urine. Urine is a highly concentrated nutrient solution which can lead to strong inhibition effects during bacterial nitrification. This can further lead to process instabilities. The major cause of instability is accumulation of the inhibitory intermediate compound nitrite, which could lead to process breakdown. Enhanced on-line nitrite monitoring can be applied in biological source-separated urine nitrification reactors as a sustainable and efficient way to improve the reactor performance, avoiding reactor failures and eventual loss of biological activity. Spectrophotometry appears as a promising candidate for the development and application of on-line nitrite monitoring. Spectroscopic methods together with chemometrics are presented in this work as a powerful tool for estimation of nitrite concentrations. Principal component regression (PCR) is applied for the estimation of nitrite concentrations using an immersible UV sensor and off-line spectra acquisition. The effect of particles and the effect of saturation, respectively, on the UV absorbance spectra are investigated. The analysis allows to conclude that (i) saturation has a substantial effect on nitrite estimation; (ii) particles appear to have less impact on nitrite estimation. In addition, improper mixing together with instabilities in the urine nitrification process appears to significantly reduce the performance of the estimation model.

Process Engineering of Stem Cells for Clinical Application

Over the last decade, human embryonic stem cells (hESCs) have garnered a lot of attention owing to their inherent self-renewal ability and pluripotency. These characteristics have opened opportunities for potential stem cell-based regenerative medicines, for development of drug discovery platforms and as unique in vitro models for the study of early human development.(...)

A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

Case histories of infectious disease management in developing countries: Phnom Penh and Kabul

Healthcare in developing countries is affected by severe poverty, political instability and diseases that may be of lesser importance in industrialized countries. The aim of this paper was to present two cases and histories of physicians working in hospitals in developing countries and to discuss the opportunities for clinical investigation and collaboration. Cases of patients in Phnom Penh, Cambodia, with histoplasmosis, cryptococcal meningitis, crusted scabies, cerebral lesions and human immunodeficiency virus and of patients in Kabul, Afghanistan, with liver cirrhosis, nephrotic syndrome and facial ulcer are discussed. Greater developmental support is required from industrialized nations, and mutually beneficial cooperation is possible since similar clinical problems exist on both sides (e.g. opportunistic cardiovascular infections). Examples for possible support of hospital medicine include physician interchange visits with defined objectives (e.g. infection control or echocardiography training) and collaboration with clinical investigations and projects developed locally (e.g. epidemiology of cardiovascular diseases or nosocomial bloodborne infections).

Policing and planning child and adolescent neuropsychiatry : the reform process in Bologna 2009-2014

Desde a aprovação do plano de saúde mental regional em Itália ... o Departamento Local de Saúde Mental e Perturbações aditivas em Bolonha, tem desenvolvido um projeto de reforma cujo objectivo é inovar o sistema de saúde mental local. ...ABSTRACT: Since the Regional mental health plan 2009-2011 was approved in Italy the Department of Mental Health and addictions of the Bologna local health trust developed as a laboratory aimed at innovating the mental health systen locally. ...

The effect of key process operational conditions on enhanced biological phosphorus removal from wastewater

Enhanced biological phosphorus removal (EBPR) is the most economic and sustainable option used in wastewater treatment plants (WWTPs) for phosphorus removal. In this process it is important to control the competition between polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs), since EBPR deterioration or failure can be related with the proliferation of GAOs over PAOs. This thesis is focused on the effect of operational conditions (volatile fatty acid (VFA) composition, dissolved oxygen (DO) concentration and organic carbon loading) on PAO and GAO metabolism. The knowledge about the effect of these operational conditions on EBPR metabolism is very important, since they represent key factors that impact WWTPs performance and sustainability. Substrate competition between the anaerobic uptake of acetate and propionate (the main VFAs present in WWTPs) was shown in this work to be a relevant factor affecting PAO metabolism, and a metabolic model was developed that successfully describes this effect. Interestingly, the aerobic metabolism of PAOs was not affected by different VFA compositions, since the aerobic kinetic parameters for phosphorus uptake, polyhydroxyalkanoates (PHAs) degradation and glycogen production were relatively independent of acetate or propionate concentration. This is very relevant for WWTPs, since it will simplify the calibration procedure for metabolic models, facilitating their use for full-scale systems. The DO concentration and aerobic hydraulic retention time (HRT) affected the PAO-GAO competition, where low DO levels or lower aerobic HRT was more favourable for PAOs than GAOs. Indeed, the oxygen affinity coefficient was significantly higher for GAOs than PAOs, showing that PAOs were far superior at scavenging for the often limited oxygen levels in WWTPs. The operation of WWTPs with low aeration is of high importance for full-scale systems, since it decreases the energetic costs and can potentially improve WWTP sustainability. Extended periods of low organic carbon load, which are the most common conditions that exist in full-scale WWTPs, also had an impact on PAO and GAO activity. GAOs exhibited a substantially higher biomass decay rate as compared to PAOs under these conditions, which revealed a higher survival capacity for PAOs, representing an advantage for PAOs in EBPR processes. This superior survival capacity of PAOs under conditions more closely resembling a full-scale environment was linked with their ability to maintain a residual level of PHA reserves for longer than GAOs, providing them with an effective energy source for aerobic maintenance processes. Overall, this work shows that each of these key operational conditions play an important role in the PAO-GAO competition and should be considered in WWTP models in order to improve EBPR processes.

Characterization tests for insulation boards made from corn cob and natural glues

In recent years there has been a growing interest in developing news solutions for more ecologic and efficient construction, including natural, renewable and local materials, thus contributing in the search for more efficient, economic and environmentally friendly construction. Several authors have assessed the possibility of using various agricultural sub products or wastes, as part of the effort of the scientific community to find alternative and more ecologic construction materials. Corn cob is an agricultural waste from a very important worldwide crop. Natural glues are made from natural materials, non-mineral, that can be used as such or after some modifications to achieve the behaviour and performance required. Two examples of these natural glues are casein and wheat flour-based glues that were used in the present study. Boards with different compositions were manufactured, having as variables the type of glue, the dimension of the corn cob particles and the features of the pressing process. The tests boards were characterized with physical and mechanical tests, such as thermal conductivity (λ) with a ISOMET 2104 and 60 mm diameter contact probe, density (ρ) based on EN 1602:2013, surface hardness (SH) with a PCE Shore A durometer, surface resistance (SR) with a PROCEQ PT pendular sclerometer, bending behaviour (σ) based on EN 12089:2013, compression behaviour (σ10) based on EN 826:2013 and resilience (R) based on EN 1094-1:2008, with a Zwick Rowell bending equipment with 2 kN and 50 kN load cells (Fig. 1), dynamic modulus of elasticity (Ed) with a Zeus Resonance Meter equipment (Fig. 5) based on NP EN 14146:2006 and water vapour permeability (δ) based on EN 12086:2013. The various boards produced were characterized according to the tests and the ones with the best results were C8_c8 (casein glue, grain size 2,38-4,76 mm, cold pressing for 8 hours), C8_c4 (casein glue, grain size 2,38-4,76 mm, cold pressing for 4 hours), F8_h0.5 (wheat flour glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours), FEV8_h0.5 (wheat flour, egg white and vinegar glue, grain size 2,38-4,76 mm, hot pressing for 0,5 hours) and FEVH68_c4 (wheat flour, egg white, vinegar and 6 g of sodium hydroxide glue, grain size 2,38-4,76 mm, cold pressing for 4 hours). Taking into account the various boards produced and respective test results the type of glue and the pressure and pressing time are very important factors which strongly influence the final product. The results obtained confirmed the initial hypotheses that these boards have potential as a thermal and, eventually, acoustic insulation material, to use as coating or intermediate layer on walls, floors or false ceilings. This type of board has a high mechanical resistance when compared with traditional insulating materials.The integrity of these boards seems to be maintained even in higher humidity environments. However, due to biological susceptibility and sensitivity to water, they would be more adequate for application in dry interior conditions.

The use of analytical hierarchy process in spatial decision support system for land use management

Geographic information systems give us the possibility to analyze, produce, and edit geographic information. Furthermore, these systems fall short on the analysis and support of complex spatial problems. Therefore, when a spatial problem, like land use management, requires a multi-criteria perspective, multi-criteria decision analysis is placed into spatial decision support systems. The analytic hierarchy process is one of many multi-criteria decision analysis methods that can be used to support these complex problems. Using its capabilities we try to develop a spatial decision support system, to help land use management. Land use management can undertake a broad spectrum of spatial decision problems. The developed decision support system had to accept as input, various formats and types of data, raster or vector format, and the vector could be polygon line or point type. The support system was designed to perform its analysis for the Zambezi river Valley in Mozambique, the study area. The possible solutions for the emerging problems had to cover the entire region. This required the system to process large sets of data, and constantly adjust to new problems’ needs. The developed decision support system, is able to process thousands of alternatives using the analytical hierarchy process, and produce an output suitability map for the problems faced.

Improving downstream processing for viral vectors and viral vaccines

Viral vectors are playing an increasingly important role in the vaccine and gene therapy elds. The broad spectrum of potential applications, together with expanding medical markets, drives the e orts to improve the production processes for viral vaccines and viral vectors. Developing countries, in particular, are becoming the main vaccine market. It is thus critical to decrease the cost per dose, which is only achievable by improving the production process. In particular advances in the upstream processing have substantially increased bioreactor yields, shifting the bioprocess bottlenecks towards the downstream processing. The work presented in this thesis aimed to develop new processes for adenoviruses puri cation. The use of state-of-the-art technology combined with innovative continuous processes contributed to build robust and cost-e ective strategies for puri cation of complex biopharmaceuticals.(...)

A model to screen and improve business potential of micro and small enterprises in developing countries: Evidence from the Island of Mozambique

Programmes supporting micro and small enterprises in developing countries have been showing that capital is not enough to allow business success: survival and growth. Literature does not provide comprehensive and practical tool to support business development in this context, but allowed the collection of forty-nine success variables that were studied in a sample of successful and unsuccessful businesses in the Island of Mozambique to discover what were the key factors affecting those businesses’ performance. Empirical data gave the insights for the development of a model to screen and improve business potential of micro and small enterprises in this context.

Nosocomial infections in a pediatric intensive care unit of a developing country: NHSN surveillance

INTRODUCTION: This study aimed to determine the epidemiology of the three most common nosocomial infections (NI), namely, sepsis, pneumonia, and urinary tract infection (UTI), in a pediatric intensive care unit (PICU) in a developing country and to define the risk factors associated with NI. METHODS: We performed a prospective study on the incidence of NI in a single PICU, between August 2009 and August 2010. Active surveillance by National Healthcare Safety Network (NHSN) was conducted in the unit and children with NI (cases) were compared with a group (matched controls) in a case-control fashion. RESULTS: We analyzed 172 patients; 22.1% had NI, 71.1% of whom acquired it in the unit. The incidence densities of sepsis, pneumonia, and UTI per 1,000 patients/day were 17.9, 11.4, and 4.3, respectively. The most common agents in sepsis were Enterococcus faecalis and Escherichia coli (18% each); Staphylococcus epidermidis was isolated in 13% of cases. In pneumonias Staphylococcus aureus was the most common cause (3.2%), and in UTI the most frequent agents were yeasts (33.3%). The presence of NI was associated with a long period of hospitalization, use of invasive devices (central venous catheter, nasogastric tube), and use of antibiotics. The last two were independent factors for NI. CONCLUSIONS: The incidence of NI acquired in this unit was high and was associated with extrinsic factors.

Adaptação cultural e contributo para a validação da pain attitudes and believes scale for physiotherapists (PABS-PT) para a população de fisioterapeutas portugueses

RESUMO: Introdução: Vários estudos têm encontrado evidência para a relação entre as crenças e atitudes dos profissionais de saúde, a sua abordagem de tratamento, referida como orientada segundo o modelo biomédico ou modelo biopsicossocial (Bishop, 2008; Mutsaers, 2012), e os resultados obtidos. É sugerido que, no tratamento da dor lombar crónica, os profissionais que orientam o seu raciocínio e prática segundo o modelo biomédico, tendem a obter piores resultados quando comparados com os obtidos pelos profissionais que orientam o seu raciocínio e prática segundo uma abordagem biopsicossocial. Esta área de estudo tem salientado a importância de desenhar instrumentos capazes de identificar a orientação preferencial dos profissionais de saúde no tratamento da dor crónica de natureza músculo-esquelética, entre os quais se encontra a “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objetivo: Adaptar culturalmente a PABS-PT para a população de fisioterapeutas portugueses que intervêm em utentes com dor (lombar) crónica, e contribuir para a sua validação Metodologia: A versão original (língua inglesa) do PABS-PT foi adaptada para a língua e cultura portuguesas, através das etapas definidas nas normas orientadoras estabelecidas para este processo (Beaton et al., 2002; MAPI Institute, 2001). A avaliação das propriedades psicométricas da versão portuguesa foi realizada com recurso a uma amostra de 202 fisioterapeutas e estudantes finalistas do curso de licenciatura em Fisioterapia. Inicialmente foi realizada a análise fatorial exploratória da escala através do método das componentes principais. Posteriormente avaliou-se a consistência interna das componentes obtidas com recurso ao alpha de Cronbach (α). Para analisar a validade de constructo foram correlacionadas as componentes obtidas com a versão portuguesa da “Health Care Providers’ Pain and Impairment Relationship Scale” (HC-PAIRS), recorrendo ao cálculo do coeficiente de Spearman. Resultados: O processo de adaptação cultural não revelou dificuldades importantes sendo considerado que a versão portuguesa da PABS-PT é de fácil compreensão e preenchimento, e os seus itens adequados para avaliar as crenças e atitudes dos fisioterapeutas portugueses relativas à intervenção na dor crónica músculo-esquelética. Os resultados revelaram uma estrutura fatorial de duas componentes, identificadas com as componentes da escala original que explicam 30,96% da variância total. A consistência interna encontrada é boa, para a componente biomédica (α de Cronbach = 0,826), mas muito fraca para a componente biopsicossocial (α de Cronbach= 0,589). Relativamente à validade convergente e discriminativa, foi encontrada uma associação estatisticamente significativa e positiva, entre as componentes 1 (biomédica) da versão nportuguesa da PABS e a HC-PAIRS (Rs = 0,481, p≤ 0,005), e negativa, fraca e significativa entre a pontuação total da componente 2 (biopsicossocial) e a HC-PAIRS (Rs = -0,038, p=0,612). Conclusão: A versão portuguesa do PABS-PT é de fácil compreensão e aparenta ser um instrumento válido para a medição da orientação preferencial dos fisioterapeutas, relativamente às suas atitudes e crenças na avaliação e tratamento de utentes com dor crónica de natureza músculo-esquelética. No entanto, a componente biopsicossocial requer uma análise mais aprofundada para que possa, com rigor, ser utilizada na definição de uma orientação preferencialmente biopsicossocial.--------------ABSTRACT: Introduction: Previous studies have found a relation between the beliefs and attitudes of health professionals, their treatment approach, which can follows a biomedical or a biopsychosocial orientation (Bishop, 2008; Mutsaers, 2012), and the outcomes obtained. Therefore, is suggested that the professionals who tend to approach chronic low back pain patients according to the biomedical model have worse outcomes than professionals who use a biopsychosocial approach in there clinical reasoning. This research field has highlighted the importance of developing measures capable of identifying the preferred orientation of health professionals in the treatment of chronic pain of musculoskeletal nature, including the “Pain Attitudes and Beliefs Scale for Physiotherapists” (PABS-PT). Objective: To cross culturally adapt and validate the PABS-PT for the Portuguese population of physiotherapists. Methodology: The original version (English version) of the PABS-PT was adapted to the Portuguese language and culture, through the guidelines established for these processes (Beaton et al., 2002; MAPI Institute, 2001). The psychometric evaluation of the Portuguese version was carried out on a sample of 202 p physiotherapist and final year students of the physiotherapy course. Initially, an exploratory factorial analysis was performed through the method of the main components. Then, the internal consistence of the main components was evaluated using the Cronbach’s alpha (α). The convergent construct validity was analysed through the correlation between the obtained components of PABS-PT and the Health Care Provider’s Pain and Impairment Relationship Scale (HC-PAIRS), using the Spearmen correlation coefficient. Results: No major difficulties were found during the cultural adaptation process of PABS-PT to Portugal, which means that the Portuguese version is easy to understand and fulfill, and items are appropriated to evaluate the beliefs and attitudes of the Portuguese physiotherapists who treat chronic pain of musculoskeletal origins. The results revealed a factorial structure of two components, as the original scale, explaining 30,96% of the total variance. Internal consistence results were good, for the biomedical component (Cronbach’s α = 0,826), but very weak for the biopsychosocial componente (Cronbach’s α = 0,589). Relatively to convergent and discriminative validity, a statistically significant association was found, between the components 1 (biomedical) of the Portuguese version of PABS-PT and the HC-PAIRS (Rs= 0,481, p≤ 0,005) and negative, weak and significant between the total score of component 2 (biopsychosocial) and the HC-PAIRS (Rs = -0,038, p=0,612). Conclusion: The Portuguese Version of PABS-PT is easy to understand and seems to be a valid instrument to measure the attitudes and beliefs of physiotherapists in the management of patients with chronic low back pain. However, the biopsychosocial component requires a further deep analysis to examine a preferable biopsychosocial orientation.

How to increase and attract more tourists into Kenya throught experiental marketing

This marketing plan project is a culmination of extensive strategies with the use of experiential marketing to address issues confronting the Kenyan tourism industry in order to have a sustainable tourism sector. Following the terrorist attack carried out by Islamist militants’ belonging to al-Shabaab terrorist organization on Nairobi’s Westgate shopping mall in September 2013, tourist forecast has gone down sharply with an average of 20% fall in tourists’ arrivals which is likely to have an impact on the tourism sector in Kenya. Even before the deadly attack on Westgate, the most lethal attack by Islamist terrorists in 15 years in Kenya, the government through the Kenya tourist board had announced that in 2013 tourist arrivals were down by 12%, at 495,978, according to an October 2013 report by Bloomberg. Tourism revenues were also down by 7.4%, over FY12/13 (July-June) to reach KES96.24bn, according to a September 2013 report on the local Capital FM website. Beyond 2013, much will depend on how quickly the Kenya tourist board can regain control of the situation. The Kenyan government believes that the Westgate mall attack was a 'one-off' incident, with a low probability of a similar event happening again over the short term period. Germany, United States, United Kingdom, Australia, Italy, France and Canada continue to be the key source market however; the Kenya tourist board can make continued growth stronger from new emerging markets in order to increase new arrivals into the country. The marketing plan outlines the objectives to be implemented and provides the implementation strategy, activity plans, monitoring and evaluation plans, financial requirements projections and proposes a new structure of experiential marketing. A number of regional forces are identified that will impact tourism into the country including global, social and economic forces, emerging trends in visitor motivations and behavior, emerging forces in experiential marketing. A major component of the strategy identifies target markets for Kenya to commensurate with the level of resources that will be available for marketing and promotion, in keeping with the forces and trends identified and the nature of the Kenya tourism environment. The agreed upon target market segments are: generic/mass travel, experiential travel, creative travel, adventure seeking travel, senior/extended/long stay travel, and business related travel. The strategy phases the development of the target markets over the years of the marketing strategies in order to yield the best opportunity for results. A core activity in developing a marketing strategy is determining the nature of experiences Kenya offers in tourism. The strategy’s experience development process will continue to develop within the context of the products identified which will be promoted regionally: culture/heritage, nature, community-based. Each county in the country has a significant number of attractions and experiences and the challenge of the country is to bring these together in a creative and innovative way in order to encourage tourists to visit more than one county in Kenya.

Process virtualization theory (PVT) and institutional theory (INT) to explain SAAS adoption

Software as a service (SaaS) is a service model in which the applications are accessible from various client devices through internet. Several studies report possible factors driving the adoption of SaaS but none have considered the perception of the SaaS features and the pressures existing in the organization’s environment. We propose an integrated research model that combines the process virtualization theory (PVT) and the institutional theory (INT). PVT seeks to explain whether SaaS processes are suitable for migration into virtual environments via an information technology-based mechanism. INT seeks to explain the effects of the institutionalized environment on the structure and actions of the organization. The research makes three contributions. First, it addresses a gap in the SaaS adoption literature by studying the internal perception of the technical features of SaaS and external coercive, normative, and mimetic pressures faced by an organization. Second, it empirically tests many of the propositions of PVT and INT in the SaaS context, thereby helping to determine how the theory operates in practice. Third, the integration of PVT and INT contributes to the information system (IS) discipline, deepening the applicability and strengths of these theories.

A logical foundation for session-based concurrent computation

Linear logic has long been heralded for its potential of providing a logical basis for concurrency. While over the years many research attempts were made in this regard, a Curry-Howard correspondence between linear logic and concurrent computation was only found recently, bridging the proof theory of linear logic and session-typed process calculus. Building upon this work, we have developed a theory of intuitionistic linear logic as a logical foundation for session-based concurrent computation, exploring several concurrency related phenomena such as value-dependent session types and polymorphic sessions within our logical framework in an arguably clean and elegant way, establishing with relative ease strong typing guarantees due to the logical basis, which ensure the fundamental properties of type preservation and global progress, entailing the absence of deadlocks in communication. We develop a general purpose concurrent programming language based on the logical interpretation, combining functional programming with a concurrent, session-based process layer through the form of a contextual monad, preserving our strong typing guarantees of type preservation and deadlock-freedom in the presence of general recursion and higher-order process communication. We introduce a notion of linear logical relations for session typed concurrent processes, developing an arguably uniform technique for reasoning about sophisticated properties of session-based concurrent computation such as termination or equivalence based on our logical approach, further supporting our goal of establishing intuitionistic linear logic as a logical foundation for sessionbased concurrency.