Fabrication of diamond nanostructures and investigation of the imbedded NV centers

Diamant ist ein Material mit vielen außerordentlichen Eigenschaften, die ihn zu einem äußerst vielversprechenden Kandidaten für Anwendungen in Wissen-schaft und Technik machen. In den letzten Jahren wurde Diamant häufig als einzigartige Plattform für neue Anwendungen beispielsweise in der Quanteninformationstechnologie (QIT) oder in der Magnetometrie im Nanometermaßstab eingesetzt, wobei einer der wichtigsten lumineszierenden Gitterdefekte im Diamantgitter eingesetzt wird. Dabei handelt es sich um die sogenannten Stickstoff/Fehlenstellen-Farbzentren (NV-Zentren), die im sichtbaren Bereich mit einer absoluten Photostabilität bei Raumtemperatur emittieren. In dieser Arbeit wurden NV-Zentren in Diamantnanokristalliten und –nanosäulen untersucht, die während des Wachstumsprozesses erzeugt wurden. Einzelne Diamantnanokristallite und nanokristalline Diamantschichten (NCD), aus denen Nanosäulen geätzt wurden, wurden mithilfe der Hot Filament Chemical Vapour Deposition (HFCVD) abgeschieden. Zu Vergleichszwecken wurden auch ultrananokristalline Diamantschichten (UNCD) mittels Mikrowellen-CVD (MWCVD) hergestellt. Die Filme wurden sorgfältig in Bezug auf ihre Morphologie, kristallinen Eigenschaften und Zusammensetzung untersucht. Um die Möglichkeit einer Integration dieser Diamantschichten mit temperaturempfindlichen Materialien wie III/V-Halbleitern, Metallen mit niedrigem Schmelzpunkt oder Polymeren zu untersuchen, wurde der Einfluss der Substrattemperatur ermittelt. Eindimensionale NCD- und UNCD-Diamantnanostrukturen wurden mithilfe der Elektronenstrahllithographie (EBL) und reaktivem Ionenätzen in einem induktiv gekoppelten O2-Plasma (ICP-RIE) hergestellt. Zur Vorbereitung wurden zunächst die Ätzraten in Abhängigkeit von den vier wichtigsten Parametern ermittelt. Weitere Erkenntnisse über die Ätzmechanismen wurden durch Ätzexperiment mit unstrukturierten NCD- und UNCD-Schichten erhalten Mittels der EBL konnten mithilfe von Gold-Ätzmasken Nanosäulen mit Durchmessern von 50 nm bis zu 1 μm hergestellt werden.Eine optische Charakterisierung der NCD- und UNCD-Nanosäulen erfolgte mithilfe von Fluorenzenz-Mapping und Photomumineszenz-Spektroskopie. Diese Messungen ergaben, dass in beiden Arten von Säulen NV-Zentren vorhanden sind. Allerdings wurden nur in NCD-Säulen die gewünschten NV--Zentren gefunden, in UNCD-Säulen hingegen nur NV0-Zentren.

Magnetic interactions between transition metal impurities and clusters mediated by low-dimensional metallic hosts: A first principles theoretical investigation

The magnetic properties and interactions between transition metal (TM) impurities and clusters in low-dimensional metallic hosts are studied using a first principles theoretical method. In the first part of this work, the effect of magnetic order in 3d-5d systems is addressed from the perspective of its influence on the enhancement of the magnetic anisotropy energy (MAE). In the second part, the possibility of using external electric fields (EFs) to control the magnetic properties and interactions between nanoparticles deposited at noble metal surfaces is investigated. The influence of 3d composition and magnetic order on the spin polarization of the substrate and its consequences on the MAE are analyzed for the case of 3d impurities in one- and two-dimensional polarizable hosts. It is shown that the MAE and easy- axis of monoatomic free standing 3d-Pt wires is mainly determined by the atomic spin-orbit (SO) coupling contributions. The competition between ferromagnetic (FM) and antiferromagnetic (AF) order in FePtn wires is studied in detail for n=1-4 as a function of the relative position between Fe atoms. Our results show an oscillatory behavior of the magnetic polarization of Pt atoms as a function of their distance from the magnetic impurities, which can be correlated to a long-ranged magnetic coupling of the Fe atoms. Exceptionally large variations of the induced spin and orbital moments at the Pt atoms are found as a function of concentration and magnetic order. Along with a violation of the third Hund’s rule at the Fe sites, these variations result in a non trivial behavior of the MAE. In the case of TM impurities and dimers at the Cu(111), the effects of surface charging and applied EFs on the magnetic properties and substrate-mediated magnetic interactions have been investigated. The modifications of the surface electronic structure, impurity local moments and magnetic exchange coupling as a result of the EF-induced metallic screening and charge rearrangements are analysed. In a first study, the properties of surface substitutional Co and Fe impurities are investigated as a function of the external charge per surface atom q. At large inter-impurity distances the effective magnetic exchange coupling ∆E between impurities shows RKKY-like oscillations as a function of the distance which are not significantly affected by the considered values of q. For distances r < 10 Å, important modifications in the magnitude of ∆E, involving changes from FM to AF coupling, are found depending non-monotonously on the value and polarity of q. The interaction energies are analysed from a local perspective. In a second study, the interplay between external EF effects, internal magnetic order and substrate-mediated magnetic coupling has been investigated for Mn dimers on Cu(111). Our calculations show that EF (∼ 1eV/Å) can induce a switching from AF to FM ground-state magnetic order within single Mn dimers. The relative coupling between a pair of dimers also shows RKKY-like oscillations as a function of the inter-dimer distance. Their effective magnetic exchange interaction is found to depend significantly on the magnetic order within the Mn dimers and on their relative orientation on the surface. The dependence of the substrate-mediated interaction on the magnetic state of the dimers is qualitatively explained in terms of the differences in the scattering of surface electrons. At short inter-dimer distances, the ground-state configuration is determined by an interplay between exchange interactions and EF effects. These results demonstrate that external surface charging and applied EFs offer remarkable possibilities of manipulating the sign and strength of the magnetic coupling of surface supported nanoparticles.

A pilot investigation of the relationship between climate variability and milk compounds under the bootstrap technique

This study analyzes the linear relationship between climate variables and milk components in Iran by applying bootstrapping to include and assess the uncertainty. The climate parameters, Temperature Humidity Index (THI) and Equivalent Temperature Index (ETI) are computed from the NASA-Modern Era Retrospective-Analysis for Research and Applications (NASA-MERRA) reanalysis (2002–2010). Milk data for fat, protein (measured on fresh matter bases), and milk yield are taken from 936,227 milk records for the same period, using cows fed by natural pasture from April to September. Confidence intervals for the regression model are calculated using the bootstrap technique. This method is applied to the original times series, generating statistically equivalent surrogate samples. As a result, despite the short time data and the related uncertainties, an interesting behavior of the relationships between milk compound and the climate parameters is visible. During spring only, a weak dependency of milk yield and climate variations is obvious, while fat and protein concentrations show reasonable correlations. In summer, milk yield shows a similar level of relationship with ETI, but not with temperature and THI. We suggest this methodology for studies in the field of the impacts of climate change and agriculture, also environment and food with short-term data.

Investigation of Multiphase Power Converter using Integrated Coupled Inductor Regarding Electric Vehicle Application

The challenge of reducing carbon emission and achieving emission target until 2050, has become a key development strategy of energy distribution for each country. The automotive industries, as the important portion of implementing energy requirements, are making some related researches to meet energy requirements and customer requirements. For modern energy requirements, it should be clean, green and renewable. For customer requirements, it should be economic, reliable and long life time. Regarding increasing requirements on the market and enlarged customer quantity, EVs and PHEV are more and more important for automotive manufactures. Normally for EVs and PHEV there are two important key parts, which are battery package and power electronics composing of critical components. A rechargeable battery is a quite important element for achieving cost competitiveness, which is mainly used to story energy and provide continue energy to drive an electric motor. In order to recharge battery and drive the electric motor, power electronics group is an essential bridge to convert different energy types for both of them. In modern power electronics there are many different topologies such as non-isolated and isolated power converters which can be used to implement for charging battery. One of most used converter topology is multiphase interleaved power converter, pri- marily due to its prominent advantages, which is frequently employed to obtain optimal dynamic response, high effciency and compact converter size. Concerning its usage, many detailed investigations regarding topology, control strategy and devices have been done. In this thesis, the core research is to investigate some branched contents in term of issues analysis and optimization approaches of building magnetic component. This work starts with an introduction of reasons of developing EVs and PEHV and an overview of different possible topologies regarding specific application requirements. Because of less components, high reliability, high effciency and also no special safety requirement, non-isolated multiphase interleaved converter is selected as the basic research topology of founded W-charge project for investigating its advantages and potential branches on using optimized magnetic components. Following, all those proposed aspects and approaches are investigated and analyzed in details in order to verify constrains and advantages through using integrated coupled inductors. Furthermore, digital controller concept and a novel tapped-inductor topology is proposed for multiphase power converter and electric vehicle application.

Investigation of aspect ratio of hole drilling from micro to nanoscale via focused ion beam fine milling

Holes with different sizes from microscale to nanoscale were directly fabricated by focused ion beam (FIB) milling in this paper. Maximum aspect ratio of the fabricated holes can be 5:1 for the hole with large size with pure FIB milling, 10:1 for gas assistant etching, and 1:1 for the hole with size below 100 nm. A phenomenon of volume swell at the boundary of the hole was observed. The reason maybe due to the dose dependence of the effective sputter yield in low intensity Gaussian beam tail regions and redeposition. Different materials were used to investigate variation of the aspect ratio. The results show that for some special material, such as Ni-Be, the corresponding aspect ratio can reach 13.8:1 with Cl₂ assistant etching, but only 0.09:1 for Si(100) with single scan of the FIB.

Compilation of documents for the development of a state of art of the investigation of perdurability

A través del estudio y la investigación basados en bibliografía de diversas nacionalidades que data desde la década de los setenta hasta la actualidad, ha sido posible analizar la tendencia académica de las investigaciones acerca la Perdurabilidad. Esta recolección de estudios es una fuente de información para todos aquellos que deseen tener un entendimiento más profundo acerca de la teoría que sostiene el concepto de Perdurabilidad. A lo largo de esta investigación, el lector encontrará un conjunto de varios autores de distintas nacionalidades que abordaron el tema de la Perdurabilidad bajo alguna de sus concepciones (longevidad, resistencia, supervivencia); lo que permite tener una visión más amplia acerca de la importancia de ciertos estudios de acuerdo a su origen y contexto cultural. Es importante resaltar que esta investigación es netamente teórica con el propósito de aclarar el concepto de Perdurabilidad y facilitar futuras investigaciones acerca de este tema

INFO2009 2012-13 Resource Group 20: video "Panorama: An Investigation into Augmented Reality"

Group 20 (km) "Kirk's Krew" is proud to present "Panorama: An Investigation into Augmented Reality," an exciting and entertaining video used for the general public which engages through a fast-paced investigatory style. You'll never forget the story of students Jake and Andrew as they seek to thwart the villianous schemes of Larry Beige with help and hindrance from AR! Explore the past, present and future of AR in a Panorama style investigation! ECS' very own Dr Enrico Costanza is on hand with years of expertise! For a full listing of share contents, please see readme.txt

A juridical-practical framework for the investigation of crimes against granting of public housing services

The public service enterprises are victims of crimes and felonies which may reduce their capacity to perform their functions. These enterprises expend much money and effort in order to prevent those criminal behaviors. For this reason they ask from the authorities more efficient measures against crime; however, such enterprises may feel that they are not being given sufficient importance and/or remedies in dealing with such crime. The aim paper of this is not to study the problem from de substantive criminal law point of view. Rather, this paper’s goal is to study the Colombia’s Rules of Criminal Procedure, which regulate the investigation of this kind of crime. The article will look particularly at the competency of the relevant authorities at the investigative stages. Finally, it will make some recommendations regarding a proper route towards the investigation of these criminal behaviors.

Bibliometric forms of the international investigation in the urban history. (1973 - 2010)

The objective of this document is to identify the behavior of the academic international production in urban history, from the bibliographical records index-linked in Scopus between 1973 and 2010. We use bibliometric indicators from SCImago Group, applying them to the production in the field of arts and humanities. Afterward, we corroborate the results obtained with the indicators calculated exclusively for 1.098 records of urban history. A geographical concentration is observed in the mechanisms of diffusion, authors and institutional affiliation. Likewise, we identify that over 50% of the works published between 1973 and 2010 have not been used by other authors to create new knowledge.

Sc1 investigation for key stage 1 and key stage 2 : a bank of differentiated investigations for primary schools.

Este documento es un intento de dar orientación y apoyo a los profesores en la organización de la enseñanza de las ciencias de investigación, en el nivel primario. Se presentan distintas actividades, flexibles para los docentes, a fin de que los niños participen en las distintas etapas del proceso de investigación: planificación, obtención y visualización de resultados y, conclusión y evaluación. Así, desarrolla unos conceptos que permitan la progresión en los conocimientos y en las pruebas prácticas de los alumnos, a nivel individual y, para los diferentes niveles educativos. Se incluyen hojas en blanco para ser rellenadas por los alumnos con sus conclusiones de cada uno de los procesos investigados.

The norman conquest : an investigation for key stage 3.

Estudia la conquista de Inglaterra por los normandos en 1066. Cumple con los requisitos del currículo nacional inglés para la etapa de 3 de secundaria (key stage 3). Este texto esta preparado para el Schools History Project creado en 1972 para mejorar el estudio de la historia entre estudiantes de trece a dieciséis años. Reconsidera las formas en que la historia contribuye a las necesidades educativas de los jóvenes, y por ello idea nuevos objetivos, nuevos criterios para la planificación y desarrollo del curso, así como nuevos materiales de apoyo. Requiere nuevos criterios de evaluación y, por tanto nuevos exámenes y, adquirió mayor expansión con la introducción del General Certificate of Secondary Education (GCSE) en 1987.

King John : a key stage 3 investigation into medieval monarchy.

Estudia la figura del rey Juan y su reputación como mal rey. Los alumnos aprenden a investigar como se forjó esta interpretación y como se ha perpetuado. Cumple con los requisitos del currículo nacional inglés para la etapa de 3 de secundaria (key stage 3). Este texto esta preparado para el Schools History Project creado en 1972 para mejorar el estudio de la historia entre estudiantes de trece a dieciséis años. Reconsidera las formas en que la historia contribuye a las necesidades educativas de los jóvenes, y por ello idea nuevos objetivos, nuevos criterios para la planificación y desarrollo del curso, así como nuevos materiales de apoyo. Requiere nuevos criterios de evaluación y, por tanto nuevos exámenes y, adquirió mayor expansión con la introducción del General Certificate of Secondary Education (GCSE) en 1987.

OCR (B) Salters AS - A2 Units F333 and F336 Chemistry : chemistry in practice and individual investigation.

Guía de revisión y apoyo para alumnos de educación secundaria de segundo ciclo que estén realizando el curso del OCR (Oxford Cambridge and RSA Examinations) en los niveles AS y A2 del área de química. Está estructurada en cuatro secciones que presentan una serie de consejos generales sobre cuestiones relacionadas con el trabajo práctico (obtención, registro y proceso de resultados en experimentos prácticos), un apartado de orientación para la realización de investigaciones individualizadas, un apéndice con algunos temas de teoría útiles en la investigación, y una sección final con las soluciones a las preguntas y ejercicios que aparecen a lo largo del libro.