Source as a controlling factor on the quality and interpretation of sediment magnetic records from the northern North Atlantic

Magnetic properties of eight particle size ranges from nine locations in Iceland and 26 locations in southern Greenland reveal the importance of source variation for our understanding of paleomagnetic and environmental magnetic records in the marine environment. These terrestrial samples show varying degrees of particle size dependence with all samples showing that the silt fraction possesses greater concentrations of ferrimagnetic minerals than either clay or sand. Fine pseudo-single domain (PSD) size magnetic grains dominate the magnetic assemblage of all Icelandic fractions. In contrast, Greenlandic samples possess greater variation in magnetic grain size; only fine silt and clay are as magnetically fine as the Icelandic PSD grains, while Greenlandic silts and sands are dominated by coarser PSD and multi-domain grains. These observations from potential marine sediment sources suggest that the silt size fraction is a likely driver for much of the concentration-dependent parameters derived from bulk magnetic records and that the magnetic grain size of the silt fraction can be used to discriminate between Icelandic and Greenlandic sources. Using these results to examine magnetic grain size records from marine sediment cores collected across the northern North Atlantic suggests that source, not just transport-controlled physical grain-size, has a significant impact on determining the magnetic grain size at a particular location. Homogeneity of magnetic grain size in Icelandic sediments at least partially explains the consistent quality of paleomagnetic records derived from cores surrounding Iceland and their ability to buffer large environmental changes. © 2013 Elsevier B.V.

Guideline on the design and conduct of cystic fibrosis clinical trials: The European Cystic Fibrosis Society–Clinical Trials Network (ECFS-CTN)

We describe the rationale for disease specific research networks in general as well as the aims and function of the European Cystic Fibrosis Society-Clinical Trials Network (ECFS-CTN) specifically. The ECFS-CTN was founded in 2009 with the aim of improving the quality and quantity of clinical research in the area of cystic fibrosis (CF) in Europe. A network of 18 clinical trial sites in 8 European countries was established according to uniform state-of-the-art quality criteria. To support the ECFS-CTN in the acquisition, planning and conduct of clinical trials, the network is equipped with a coordinating centre, steering and executive committees, and committees for protocol review, standardization, training and networking as well as a data safety monitoring board. A strong partnership with European CF patient parent organizations aims to increase awareness of the need for efficient clinical research and the participation of patients in clinical trials.

Optimization of image quality and dose for Varian aS500 electronic portal imaging devices (EPIDs)

This study was carried out to investigate whether the electronic portal imaging (EPI) acquisition process could be optimized, and as a result tolerance and action levels be set for the PIPSPro QC-3V phantom image quality assessment. The aim of the optimization process was to reduce the dose delivered to the patient while maintaining a clinically acceptable image quality. This is of interest when images are acquired in addition to the planned patient treatment, rather than images being acquired using the treatment field during a patient's treatment. A series of phantoms were used to assess image quality for different acquisition settings relative to the baseline values obtained following acceptance testing. Eight Varian aS500 EPID systems on four matched Varian 600C/D linacs and four matched Varian 2100C/D linacs were compared for consistency of performance and images were acquired at the four main orthogonal gantry angles. Images were acquired using a 6 MV beam operating at 100 MU min(-1) and the low-dose acquisition mode. Doses used in the comparison were measured using a Farmer ionization chamber placed at d(max) in solid water. The results demonstrated that the number of reset frames did not have any influence on the image contrast, but the number of frame averages did. The expected increase in noise with corresponding decrease in contrast was also observed when reducing the number of frame averages. The optimal settings for the low-dose acquisition mode with respect to image quality and dose were found to be one reset frame and three frame averages. All patients at the Northern Ireland Cancer Centre are now imaged using one reset frame and three frame averages in the 6 MV 100 MU min(-1) low-dose acquisition mode. Routine EPID QC contrast tolerance (+/-10) and action (+/-20) levels using the PIPSPro phantom based around expected values of 190 (Varian 600C/D) and 225 (Varian 2100C/D) have been introduced. The dose at dmax from electronic portal imaging has been reduced by approximately 28%, and while the image quality has been reduced, the images produced are still clinically acceptable.

Voltage Dip Benchmarking in Power Quality and Disturbance Monitoring

This paper examines power quality benchmarks in the electricity supply industry (ESI) and impact of standards for the reduction of voltage dip incidents. The paper considers adherence to particular standards and is supported by several case studies from incidents where voltage dips have been detected and assessed by the power systems division of Scottish Power and where improvements have been implemented to help militate against subsequent incidents.

Stability and performance enhancements of Electrokinetic-Fenton soil remediation

Electrokinetic process is a potential in situ soil remediation process which transports the contaminants via electromigration and electroosmosis. For organic compounds contaminated soil, Fenton’s reagent is utilized as a flushing agent in electrokinetic process (Electrokinetic-Fenton) so that removal of organic contaminants could be achieved by in situ oxidation/destruction. However, this process is not applied widely in industries as the stability issue for Fenton’s reagent is the main drawback. The aim of this mini review is to summarize the developments of Electrokinetic-Fenton process on enhancing the stability of Fenton’s reagent and process efficiency in past decades. Generally, the enhancements are conducted via four paths: (1) chemical stabilization to delay H2O2 decomposition, (2) increase of oxidant availability by monitoring injection method for Fenton’s reagent, (3) electrodes operation and iron catalysts and (4) operating conditions such as voltage gradient, electrolytes and H2O2 concentration. In addition, the types of soils and contaminants are also showing significant effect as the soil with low acid buffering capacity, adequate iron concentration, low organic matter content and low aromatic ring organic contaminants generally gives better efficiency.

Design methodology to trade off power, output quality and error resiliency: Application to color interpolation filtering

Power dissipation and tolerance to process variations pose conflicting design requirements. Scaling of voltage is associated with larger variations, while Vdd upscaling or transistor up-sizing for process tolerance can be detrimental for power dissipation. However, for certain signal processing systems such as those used in color image processing, we noted that effective trade-offs can be achieved between Vdd scaling, process tolerance and "output quality". In this paper we demonstrate how these tradeoffs can be effectively utilized in the development of novel low-power variation tolerant architectures for color interpolation. The proposed architecture supports a graceful degradation in the PSNR (Peak Signal to Noise Ratio) under aggressive voltage scaling as well as extreme process variations in. sub-70nm technologies. This is achieved by exploiting the fact that some computations are more important and contribute more to the PSNR improvement compared to the others. The computations are mapped to the hardware in such a way that only the less important computations are affected by Vdd-scaling and process variations. Simulation results show that even at a scaled voltage of 60% of nominal Vdd value, our design provides reasonable image PSNR with 69% power savings.

Falls prevention and support:: translating research, integrating services and promoting the contribution of service users for quality and innovative programmes of care

Falls are a significant threat to the safety, health and independence of older citizens. Despite the substantial evidence that is available around effective falls prevention programmes and interventions, their translation into falls reduction programmes and policies has yet to be fully realised. While hip fracture rates are decreasing, the number and incidence of fall-related hospital admissions among older people continue to rise. Given the demographic trends that highlight increasing numbers of older people in the UK, which is broadly reflected internationally, there is a financial and social imperative to minimise the rate of falls and associated injuries. Falling is closely aligned to growing older (Slips, Trips and Falls Update: From Acute and Community Hospitals and Mental Health Units in England and Wales, Department of Health, HMSO, London, 2010). According to the World Health Organization, around 30% of older people aged over 65 and 50% of those over 80 will fall each year (Falls Fact Sheet Number 344, WHO, Geneva, 2010). Falls happen as a result of many reasons and can have harmful consequences, including loss of mobility and independence, confidence and in many cases even death (Cochrane Database Syst Rev 15, 2009, 146; Slips, Trips and Falls Update: From Acute and Community Hospitals and Mental Health Units in England and Wales, Department of Health, HMSO, London, 2010; Falling Standards, Broken Promises: Report of the National
Audit of Falls and Bone Health in Older People 2010, Health Care Quality
Improvement Partnership, London, 2011). What is neither fair nor correct is the
common belief by old and young alike that falls are just another inconvenience to put up with. The available evidence justifiably supports the view that well-organised services, based upon national standards and expert guidance, can prevent future falls among older people and reduce death and disability from fractures. This paper will draw from the UK, as an exemplar for policy and practice, to discuss the strategic direction of falls prevention programmes for older people and the partnerships that need to exist between researchers, service providers and users of services to translate evidence to the clinical setting. Second, it will propose some mechanisms for disseminating evidence to healthcare professionals and other stakeholders, to improve the quality and capacity of the clinical workforce.

Changes in quality and safety attributes throughout long term storage of tomato juice processed by high pressure.

Tomato is the second most widely grown vegetable crop across the globe and it is one of widely cultivated crops in Sri Lanka. However, tomato industry in Sri Lanka facing a problem of high postharvest loss (54%) during the glut coupled with heavy revenue loss to the country by importing processed products. The aim of this work is to develop shelf-stable tomato product with maximum quality characteristics using high pressure processing (HPP). Tomato juice with altered and unaltered pH was processed using HPP at 600 MPa for 1 min after blanching (90 oC/2 min). As a control tomato juice was subjected to thermal processing (TP) at 95 oC /20 min. Processed samples were stored under 20oC and 28oC for 9 month period and analysed for total viable count (TVC) and instrumental colour (L, a, b) value at 0,1,2 3, and 4 week and 2, 3, 6 and 9 months interval. The raw juice sample had initial 6.69 log10 CFU/ml and both TP and HPP caused a more than 4.69 log10 reduction in the TVC of juice and microbial numbers remained low throughout the storage period even at 3 months after storage irrespective of the storage temperature. Both TP and HPP treated samples had the redness ⤘a value’ of 14.44-17.15 just after processing and showed non-significant reduction with storage in all the treatments after 3 months. The storage study results and discussed in relation to the end goal and compared with the literature.

Ecological dynamics of extinct species in empty habitat networks. 1. The role of habitat pattern and quantity, stochasticity and dispersal

We examined a remnant host plant (Primula veris L.) habitat network that was last inhabited by the rare butterfly Hamearis lucina L. in north Wales in 1943, to assess the relative contribution of several spatial parameters to its regional extinction. We first examined relationships between P. veris characteristics and H. lucina eggs in surviving H. lucina populations, and used these to predict the suitability and potential carrying capacity of the habitat network in north Wales. This resulted in an estimate of roughly 4500 eggs (ca 227 adults). We developed a discrete space, discrete time metapopulation model to evaluate the relative contribution of dispersal distance, habitat and environmental stochasticity as possible causes of extinction. We simulated the potential persistence of the butterfly in the current network as well as in three artificial (historical and present) habitat networks that differed in the quantity (current and X3) and fragmentation of the habitat (current and aggregated). We identified that reduced habitat quantity and increased isolation would have increased the probability of regional extinction, in conjunction with environmental stochasticity and H. lucina's dispersal distance. This general trend did not change in a qualitative manner when we modified the ability of dispersing females to stay in, and find suitable habitats (by changing the size of the grid cells used in the model). Contrary to most metapopulation model predictions, system persistence declined with increasing migration rate, suggesting that the mortality of migrating individuals in fragmented landscapes may pose significant risks to system-wide persistence. Based on model predictions for the present landscape we argue that a major programme of habitat restoration would be required for a re-established metapopulation to persist for > 100 years.

Lanthanide luminescent logic gate mimics in soft matter: [H(+)] and [F(-)] dual-input device in a polymer gel with potential for selective component release

The non-covalent incorporation of responsive luminescent lanthanide, Ln(iii), complexes with orthogonal outputs from Eu(iii) and Tb(iii) in a gel matrix allows for in situ logic operation with colorimetric outputs. Herein, we report an exemplar system with two inputs ([H(+)] and [F(-)]) within a p(HEMA-co-MMA) polymer organogel acting as a dual-responsive device and identify future potential for such systems.

What is being taught in Religious Education classes in Northern Ireland and to what extent should states be concerned about regulation, quality and control of the subject?

This paper reports on a research project designed to discover what schools are teaching in Religious Education in Northern Ireland and what procedures are in place to maintain standards in the delivery of the subject. A search through literature shows that little research has been carried out to determine what is being taught in Religious Education in Northern Ireland. It also indicates that there are very weak systems of control to measure the effectiveness or quality of what is delivered. A survey of the websites of all Post-Primary schools in the region was used to provide some answers to the basic question of what is being taught in RE. Using content and discourse analysis of these alongside supporting documentary sources (textbooks and exam specifications), it is possible to get a clearer picture of how the Northern Ireland Core Syllabus for Religious Education and any additional curricular elements are delivered in schools. The findings show that a significant minority of schools do not publicly articulate what pupils do in religious education. In situations where the content of religious education is made clear, some definite trends are evident. Despite the existence of a statutory core syllabus, there is significant variation in what is taught in schools. The content is most divergent from the syllabus in relation to the teaching of World Religions at Key Stage 3 and at Key Stage 4 whole elements of the syllabus are neglected due to limited conformity between the syllabus and exam specifications. These results raise important questions about the systems of regulation and control of the subject in the region. In law the subject is exempt from formal inspection by the local inspection authority; instead, a form of inspection is allowed for by the Christian churches who design the syllabus, but it is a process that is either entirely neglected or entirely unreported in situations where it does occur. It is argued that these findings raise questions of more general concern for this and other regions in Europe where the teaching of religious education is largely unregulated. For example, to what extent should states take an interest in what is taught in religious education, how it is delivered, what values it promotes and how standards of teaching and learning in the subject are upheld?