A model for setting services on auxiliary bus lines under congestion

In this paper, a mathematical programming model and a heuristically derived solution is described to assist with the efficient planning of services for a set of auxiliary bus lines (a bus-bridging system) during disruptions of metro and rapid transit lines. The model can be considered static and takes into account the average flows of passengers over a given period of time (i.e., the peak morning traffic hour) Auxiliary bus services must accommodate very high demand levels, and the model presented is able to take into account the operation of a bus-bridging system under congested conditions. A general analysis of the congestion in public transportation lines is presented, and the results are applied to the design of a bus-bridging system. A nonlinear integer mathematical programming model and a suitable approximation of this model are then formulated. This approximated model can be solved by a heuristic procedure that has been shown to be computationally viable. The output of the model is as follows: (a) the number of bus units to assign to each of the candidate lines of the bus-bridging system; (b) the routes to be followed by users passengers of each of the origin–destination pairs; (c) the operational conditions of the components of the bus-bridging system, including the passenger load of each of the line segments, the degree of saturation of the bus stops relative to their bus input flows, the bus service times at bus stops and the passenger waiting times at bus stops. The model is able to take into account bounds with regard to the maximum number of passengers waiting at bus stops and the space available at bus stops for the queueing of bus units. This paper demonstrates the applicability of the model with two realistic test cases: a railway corridor in Madrid and a metro line in Barcelona Planificación de los servicios de lineas auxiliares de autobuses durante las incidencias de las redes de metro y cercanías. El modelo estudia el problema bajo condiciones de alta demanda y condiciones de congestión. El modelo no lineal resultante es resuelto mediante heurísticas que demuestran su utilidad. Se demuestran los resultados en dos corredores de las ciudades de Barcelona y Madrid.

A dynamic programming approach to the formulation and solution of finite element equations

A method for formulating and algorithmically solving the equations of finite element problems is presented. The method starts with a parametric partition of the domain in juxtaposed strips that permits sweeping the whole region by a sequential addition (or removal) of adjacent strips. The solution of the difference equations constructed over that grid proceeds along with the addition removal of strips in a manner resembling the transfer matrix approach, except that different rules of composition that lead to numerically stable algorithms are used for the stiffness matrices of the strips. Dynamic programming and invariant imbedding ideas underlie the construction of such rules of composition. Among other features of interest, the present methodology provides to some extent the analyst's control over the type and quantity of data to be computed. In particular, the one-sweep method presented in Section 9, with no apparent counterpart in standard methods, appears to be very efficient insofar as time and storage is concerned. The paper ends with the presentation of a numerical example

Interval-based ranking in noisy evolutionary multiobjective optimization

As one of the most competitive approaches to multi-objective optimization, evolutionary algorithms have been shown to obtain very good results for many realworld multi-objective problems. One of the issues that can affect the performance of these algorithms is the uncertainty in the quality of the solutions which is usually represented with the noise in the objective values. Therefore, handling noisy objectives in evolutionary multi-objective optimization algorithms becomes very important and is gaining more attention in recent years. In this paper we present ?-degree Pareto dominance relation for ordering the solutions in multi-objective optimization when the values of the objective functions are given as intervals. Based on this dominance relation, we propose an adaptation of the non-dominated sorting algorithm for ranking the solutions. This ranking method is then used in a standardmulti-objective evolutionary algorithm and a recently proposed novel multi-objective estimation of distribution algorithm based on joint variable-objective probabilistic modeling, and applied to a set of multi-objective problems with different levels of independent noise. The experimental results show that the use of the proposed method for solution ranking allows to approximate Pareto sets which are considerably better than those obtained when using the dominance probability-based ranking method, which is one of the main methods for noise handling in multi-objective optimization.

Quality-optimization algorithm based on stochastic dynamic programming for MPEG DASH video streaming

In contrast to traditional push-based protocols, adaptive streaming techniques like Dynamic Adaptive Streaming over HTTP (DASH) fix attention on the client, who dynamically requests different-quality portions of the content to cope with a limited and variable bandwidth but aiming at maximizing the quality perceived by the user. Since DASH adaptation logic at the client is not covered by the standard, we propose a solution based on Stochastic Dynamic Programming (SDP) techniques to find the optimal request policies that guarantee the users' Quality of Experience (QoE). Our algorithm is evaluated in a simulated streaming session and is compared with other adaptation approaches. The results show that our proposal outperforms them in terms of QoE, requesting higher qualities on average.

Performance and Professional Skills in an Online Java Programming Course for Engineering Students

The main purpose of this work is to describe the case of an online Java Programming course for engineering students to learn computer programming and to practice other non-technicalabilities: online training, self-assessment, teamwork and use of foreign languages. It is important that students develop confidence and competence in these skills, which will be required later in their professional tasks and/or in other engineering courses (life-long learning). Furthermore, this paper presents the pedagogical methodology, the results drawn from this experience and an objective performance comparison with another conventional (face-to-face) Java course.

Hammer: an Android based application for end-user industrial robot programming

This paper presents a novel tablet based end-user interface for industrial robot programming (called Hammer). This application makes easier to program tasks for industrial robots like polishing, milling or grinding. It is based on the Scratch programming language, but specifically design and created for Android OS. It is a visual programming concept that allows non-skilled programmer operators to create programs. The application also allows to monitor the tasks while it is being executed by overlapping real time information through augmented reality. The application includes a teach pendant screen that can be customized according to the operator needs at every moment.

A tool assisting teachers in automating the assessment of programming assignments

Automating the assessment of programming assignments brings benefits for both students and teachers, since it helps the formers to gain a timely feedback and releases the latter from tedious tasks. The related literature in the domain has usually focused on the assessment process and the tools required for it, proposing libraries and systems that teachers can use in this process. However, few of them have work rowards reducing the effort and time teacher require to properly set up new assessente processes. This paper describes our experience with the analysis and design of a new tool to support teachers in visually developing automatic grades of programming assignments, introducing the underlying concepts and technologies and presenting the system architecture.

Multiobjective structural damage identification in uncertain environments

Evolutionary algorithms are suitable to solve damage identification problems in a multiobjective context. However, the performance of these methods can deteriorate quickly with increasing noise intensities originating numerous uncertainties. In this paper, a statistic structural damage detection method formulated in a multiobjective context is proposed. The statistic analysis is implemented to take into account the uncertainties existing in the structural model and measured structural modal parameters. The presented method is verified by a number of simulated damage scenarios. The effects of noise and damage levels on damage detection are investigated.

Análisis de sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CFD)para el desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Propulsion Module for a space mission Concurrent Design Facility (CDF)

El objetivo de este proyecto es recoger y explicar el conjunto de tareas realizadas durante el proceso de colaboración llevado a cabo en el Instituto de Microgravedad “Ignacio Da Riva” durante el curso académico 2014/2015, las cuales han conformado las prácticas externas cursadas en la titulación de Grado en Ingeniería Aeroespacial, y el Trabajo de Fin de Grado de la misma titulación. En este documento se pretende,además, poner de manifiesto la rigurosidad con la que se trabaja en el ámbito espacial y la importancia de los protocolos y procedimientos para asegurar un resultado adecuado en los trabajos realizados. Una parte importante del proyecto detalla los procesos de monitorización y mantenimiento de la batería del satélite universitario UPMSat-2 cuyo lanzamiento está previsto para el año próximo y el cual será el segundo satélite del mundo en incorporar una batería de Ión-Litio.

Análisis de sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CDF) para desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Orbit Design Module for a space mission Concurrent Design Facility (CDF)

El presente proyecto se ha realizado durante las prácticas curriculares que han tenido lugar en el Instituto Universitario de Microgravedad “Ignacio Da Riva” (IDR/UPM). A lo largo de estas prácticas se han llevado a cabo trabajos en diversos campos, todos relacionados con el UPMSat-2, desde el subsistema de potencia (placas solares y baterías) hasta el desarrollo de módulos para la Sala de Diseño Concurrente (Concurrent Design Facility, CDF). En la realización de las mismas se ha trabajado en equipo, junto con otros dos alumnos. El objetivo del proyecto es recopilar las tareas realizadas, proporcionando el desarrollo teórico necesario para llevar a cabo todas ellas. Al ser un trabajo con varias partes claramente diferenciadas, se ha optado por comenzar con unas páginas dedicadas a las misiones espaciales. A continuación el trabajo se adentra en el subsistema de potencia de un satélite, particularizando para el UPMSat-2. Finalmente, se proporciona la teoría necesaria para el desarrollo del módulo de misión de la CDF del IDR/UPM, software que se ha desarrollado y tiene reservado un espacio al final, en el cual se describe el programa y se realizan comparaciones de los resultados que proporciona frente a casos reales.

Análisis en sistemas eléctricos en microsatélites. Desarrollo de módulos para una Concurrent Design Facility (CDF) para desarrollo y análisis de misiones espaciales = Analysis of microsatellites power subsystems (battery testing). Development and programming of a new Orbit Design Module for a space mission Concurrent Design Facility (CDF)

El objetivo de este trabajo de fin de grado es la exposición de los resultados y conclusiones, fruto de las tareas desarrolladas durante las practicas curriculares en el Instituto Universitario de Microgravedad “Ignacio Da Riva” (IDR/UPM) el presente curso académico. La estructura del trabajo se compone de dos bloques diferenciados entre sí: el seguimiento de una batería y el desarrollo de un módulo para una CDF.

A Fuzzy approach based on dynamic programming and metaheuristics for selecting safeguards for risk management for information systems

In this paper we focus on the selection of safeguards in a fuzzy risk analysis and management methodology for information systems (IS). Assets are connected by dependency relationships, and a failure of one asset may affect other assets. After computing impact and risk indicators associated with previously identified threats, we identify and apply safeguards to reduce risks in the IS by minimizing the transmission probabilities of failures throughout the asset network. However, as safeguards have associated costs, the aim is to select the safeguards that minimize costs while keeping the risk within acceptable levels. To do this, we propose a dynamic programming-based method that incorporates simulated annealing to tackle optimizations problems.

A management model for closed-loop supply chains of reusable articles

This PhD dissertation is framed in the emergent fields of Reverse Logistics and ClosedLoop Supply Chain (CLSC) management. This subarea of supply chain management has gained researchers and practitioners' attention over the last 15 years to become a fully recognized subdiscipline of the Operations Management field. More specifically, among all the activities that are included within the CLSC area, the focus of this dissertation is centered in direct reuse aspects. The main contribution of this dissertation to current knowledge is twofold. First, a framework for the so-called reuse CLSC is developed. This conceptual model is grounded in a set of six case studies conducted by the author in real industrial settings. The model has also been contrasted with existing literature and with academic and professional experts on the topic as well. The framework encompasses four building blocks. In the first block, a typology for reusable articles is put forward, distinguishing between Returnable Transport Items (RTI), Reusable Packaging Materials (RPM), and Reusable Products (RP). In the second block, the common characteristics that render reuse CLSC difficult to manage from a logistical standpoint are identified, namely: fleet shrinkage, significant investment and limited visibility. In the third block, the main problems arising in the management of reuse CLSC are analyzed, such as: (1) define fleet size dimension, (2) control cycle time and promote articles rotation, (3) control return rate and prevent shrinkage, (4) define purchase policies for new articles, (5) plan and control reconditioning activities, and (6) balance inventory between depots. Finally, in the fourth block some solutions to those issues are developed. Firstly, problems (2) and (3) are addressed through the comparative analysis of alternative strategies for controlling cycle time and return rate. Secondly, a methodology for calculating the required fleet size is elaborated (problem (1)). This methodology is valid for different configurations of the physical flows in the reuse CLSC. Likewise, some directions are pointed out for further development of a similar method for defining purchase policies for new articles (problem (4)). The second main contribution of this dissertation is embedded in the solutions part (block 4) of the conceptual framework and comprises a two-level decision problem integrating two mixed integer linear programming (MILP) models that have been formulated and solved to optimality using AIMMS as modeling language, CPLEX as solver and Excel spreadsheet for data introduction and output presentation. The results obtained are analyzed in order to measure in a client-supplier system the economic impact of two alternative control strategies (recovery policies) in the context of reuse. In addition, the models support decision-making regarding the selection of the appropriate recovery policy against the characteristics of demand pattern and the structure of the relevant costs in the system. The triangulation of methods used in this thesis has enabled to address the same research topic with different approaches and thus, the robustness of the results obtained is strengthened.

Optimization methods for the operating room management under uncertainty: stochastic programming vs. decomposition approach

The operating theatres are the engine of the hospitals; proper management of the operating rooms and its staff represents a great challenge for managers and its results impact directly in the budget of the hospital. This work presents a MILP model for the efficient schedule of multiple surgeries in Operating Rooms (ORs) during a working day. This model considers multiple surgeons and ORs and different types of surgeries. Stochastic strategies are also implemented for taking into account the uncertain in surgery durations (pre-incision, incision, post-incision times). In addition, a heuristic-based methods and a MILP decomposition approach is proposed for solving large-scale ORs scheduling problems in computational efficient way. All these computer-aided strategies has been implemented in AIMMS, as an advanced modeling and optimization software, developing a user friendly solution tool for the operating room management under uncertainty.

Architecture to Support Automatic Grading Processes in Programming Teaching

La calificación automática de tareas de programación es un tema importante dentro del campo de la innovación educativa que se enfoca en mejorar las habilidades de programación de los estudiantes y en optimizar el tiempo que el profesorado dedica a ello. Uno de los principales problemas vigentes está relacionado con la diversidad de criterios para calificar las tareas de programación. El presente trabajo propone e implementa una arquitectura, basada en el concepto de orquestación de servicios, para soportar varios procesos de calificación automática de tareas de programación. Esto es obtenido a través de las características de modularidad, extensibilidad y flexibilidad que la arquitectura provee al proceso de calificación. La arquitectura define como pieza clave un elemento llamado Grading-submodule, el mismo que provee un servicio de evaluación del código fuente considerando un criterio de calificación. La implementación se ha llevado a cabo sobre la herramienta Virtual Programming Lab; y los resultados demuestran la factibilidad de realización, y la utilidad tanto para el profesorado como para los estudiantes.