Interactions spatiales et auto-organisation des végétations semi-arides

Les recherches récapitulées dans cette thèse de doctorat ont porté sur les causes de l’organisation spatiale des végétations périodiques. Ces structures paysagères aux motifs réguliers, tachetés, tigrés ou labyrinthiques, d’échelle décamétrique à hectométrique, couvrant des étendues considérables sur au moins trois continents, constituent un cas d’école dans l’étude des processus endogènes présidant à l’hétérogénéité du couvert végétal. Ces structures prennent place sur un substrat homogène, mis à part la rétroaction du couvert lui-même, et sont marquées par des écotones abrupts et la persistance d’une proportion considérable de sol nu. Plusieurs modèles ont mis en avant l’existence possible d’un phénomène d’auto-organisation du couvert, qui verrait une structure d’ensemble émerger des interactions locales entre individus. Ces modèles se basent sur le jeu simultané de la consommation de la ressource (compétition) et de l’amélioration de l’un ou l’autre des éléments du bilan de la même ressource par le couvert (facilitation). La condition à l’existence d’une structure d’ensemble spatialement périodique et stable réside dans une différence entre la portée de la compétition (plus grande) et celle de la facilitation. L’apparition de ces structures est modulée par le taux de croissance biologique, qui est le reflet des contraintes extérieures telles que l’aridité, le pâturage ou la coupe de bois. Le modus operandi des interactions spatiales supposées entre individus reste largement à préciser.

Nos recherches ont été menées au sud-ouest de la République du Niger, à l’intérieur et dans les environs du parc Régional du W. Trois axes ont été explorés :(i) Une étude de la dépendance spatiale entre la structure de la végétation (biovolumes cartographiés) et les paramètres du milieu abiotique (relief, sol), sur base d’analyses spectrales et cross-spectrales par transformée de Fourier (1D et 2D). (ii) Une étude diachronique (1956, 1975 et 1996) à large échelle (3000 km²) de l’influence de l’aridité et des pressions d’origine anthropique sur l’auto-organisation des végétations périodiques, basée sur la caractérisation de la structure spatiale des paysages sur photos aériennes via la transformée de Fourier en 2D. (iii) Trois études portant sur les interactions spatiales entre individus :En premier lieu, via l’excavation des systèmes racinaires (air pulsé) ;Ensuite, par un suivi spatio-temporel du bilan hydrique du sol (blocs de gypse) ;Enfin, via le marquage de la ressource par du deutérium.

Nous avons ainsi pu établir que les végétations périodiques constituent bien un mode d’auto-organisation pouvant survenir sur substrat homogène et modulé par les contraintes climatiques et anthropiques. Un ajustement rapide entre l’organisation des végétations périodiques et le climat a pu être montrée en zone protégée. La superficie et l’organisation des végétations périodiques y ont tour à tour progressé et régressé en fonction d’épisodes secs ou humides. Par contre, en dehors de l’aire protégée, la possibilité d’une restauration du couvert semble fortement liée au taux d’exploitation des ressources végétales. Ces résultats ont d’importantes implications quant à la compréhension des interactions entre climat et écosystèmes et à l’évaluation de leurs capacités de charge. La caractérisation de la structure spatiale des végétations arides, notamment par la transformée de Fourier d’images HR, devrait être généralisée comme outil de monitoring de l’état de ces écosystèmes. Nos études portant sur les modes d’interactions spatiales ont permis de confirmer l’existence d’une facilitation à courte portée du couvert végétal sur la ressource. Cependant, cette facilitation ne semble pas s’exercer sur le terme du bilan hydrique traditionnellement avancé, à savoir l’infiltration, mais plutôt sur le taux d’évaporation (deux fois moindre à l’ombre des canopées). Ce mécanisme exclut l’existence de transferts diffusifs souterrains entre sols nu et fourrés. Des transferts inverses semblent d’ailleurs montrés par le marquage isotopique. L’étude du bilan hydrique et la cartographie du micro-relief, ainsi que la profondeur fortement réduite de la zone d’exploitation racinaire, jettent de sérieux doutes quant au rôle communément admis des transferts d’eau par ruissellement/diffusion de surface en tant que processus clé dans la compétition à distance entre les plantes. L’alternative réside dans l’existence d’une compétition racinaire de portée supérieure aux canopées. Cette hypothèse trouve une confirmation tant par les rhizosphères excavées, superficielles et étendues, que dans le marquage isotopique, montrant des contaminations d’arbustes situés à plus de 15 m de la zone d’apport. De même, l’étude du bilan hydrique met en évidence les influences simultanées et contradictoires (facilitation/compétition) des ligneux sur l’évapotranspiration.

/

This PhD thesis gathers results of a research dealing with the causes of the spatial organisation of periodic vegetations. These landscape structures, featuring regular spotted, labyrinthine or banded patterns of decametric to hectometric scale, and extending over considerable areas on at least three continents, constitute a perfect study case to approach endogenous processes leading to vegetation heterogeneities. These patterns occur over homogeneous substratum, except for vegetation’s own feedbacks, and are marked by sharp ecotones and the persistence of a considerable amount of bare soil. A number of models suggested a possible case of self-organized patterning, in which the general structure would emerge from local interactions between individuals. Those models rest on the interplay of competitive and facilitative effects, relating to soil water consumption and to soil water budget enhancement by vegetation. A general necessary condition for pattern formation to occur is that negative interactions (competition) have a larger range than positive interactions (facilitation). Moreover, all models agree with the idea that patterning occurs when vegetation growth decreases, for instance as a result of reduced water availability, domestic grazing or wood cutting, therefore viewing patterns as a self-organised response to environmental constraints. However the modus operandi of the spatial interactions between individual plants remains largely to be specified.

We carried out a field research in South-West Niger, within and around the W Regional Park. Three research lines were explored: (i) The study of the spatial dependency between the vegetation pattern (mapped biovolumes) and the factors of the abiotic environment (soil, relief), on the basis of spectral and cross-spectral analyses with Fourier transform (1D and 2D). (ii) A broad scale diachronic study (1956, 1975, 1996) of the influence of aridity and human induced pressures on the vegetation self-patterning, based on the characterisation of patterns on high resolution remote sensing data via 2D Fourier transform. (iii) Three different approaches of the spatial interactions between individuals: via root systems excavation with pulsed air; via the monitoring in space and time of the soil water budget (gypsum blocks method); and via water resource labelling with deuterated water.

We could establish that periodic vegetations are indeed the result of a self-organisation process, occurring in homogeneous substratum conditions and modulated by climate and human constraints. A rapid adjustment between vegetation patterning and climate could be observed in protected zones. The area and patterning of the periodic vegetations successively progressed and regressed, following drier or wetter climate conditions. On the other hand, outside protected areas, the restoration ability of vegetation appeared to depend on the degree of vegetation resource exploitation. These results have important implications regarding the study of vegetation-climate interactions and the evaluation of ecosystems’ carrying capacities. Spatial pattern characterisation in arid vegetations using Fourier transform of HR remote sensing data should be generalised for the monitoring of those ecosystems. Our studies dealing with spatial interaction mechanisms confirmed the existence of a short range facilitation of the cover on water resource. However, this facilitation does not seem to act through the commonly accepted infiltration component, but rather on the evaporative rate (twice less within thickets). This mechanism excludes underground diffusive transfers between bare ground and vegetation. Inverse transfers were even shown by deuterium labelling. Water budget study and micro-elevation mapping, along with consistent soil shallowness, together cast serious doubts on the traditional mechanism of run-off/diffusion of surface water as a key process of the long range competition between plants. An alternative explanation lies in long range root competition. This hypothesis find support as well in the excavated root systems, shallow and wide, as in isotopic labelling, showing contaminations of shrubs located up to 15 m of the irrigated area. Water budget study also evidenced simultaneous contradictory effects (facilitation/competition) of shrubs on evapotranspiration.

Investigation into the performance of turbulence models for fluid flow and heat transfer phenomena in electronic applications

Heat is extracted away from an electronic package by convection, conduction, and/or radiation. The amount of heat extracted by forced convection using air is highly dependent on the characteristics of the airflow around the package which includes its velocity and direction. Turbulence in the air is also important and is required to be modeled accurately in thermal design codes that use computational fluid dynamics (CFD). During air cooling the flow can be classified as laminar, transitional, or turbulent. In electronics systems, the flow around the packages is usually in the transition region, which lies between laminar and turbulent flow. This requires a low-Reynolds number numerical model to fully capture the impact of turbulence on the fluid flow calculations. This paper provides comparisons between a number of turbulence models with experimental data. These models included the distance from the nearest wall and the local velocity (LVEL), Wolfshtein, Norris and Reynolds, k-ε, k-ω, shear-stress transport (SST), and kε/kl models. Results show that in terms of the fluid flow calculations most of the models capture the difficult wake recirculation region behind the package reasonably well, although for packages whose heights cause a high degree of recirculation behind the package the SST model appears to struggle. The paper also demonstrates the sensitivity of the models to changes in the mesh density; this study is aimed specifically at thermal design engineers as mesh independent simulations are rarely conducted in an industrial environment.

The creative masses of digital Britain

The present recession has prompted scholarly and journalistic questioning of the contributions of the cultural industries to the economy. The talent-rich metropolitan clusters of London and New York are well-placed to ride out a thoroughgoing shakeup of the media markets if they manage their infrastructure, space and resources strategically, as Richard Florida has recently argued. This seems to be the assumption behind the recent Digital Britain interim report, and Gordon Brown's remarks that a digital revolution "lies at the heart" of Britain's economic recovery and that broadband and the media industry can play a leading role in pulling the UK out of the recession. Focusing on the Digital Britain report and consultation documents, this presentation seeks to unpack some of the fundamental assumptions behind this link between digital infrastructure, creativity and profitability. In particular the implicit notion of an engaged audience of users, generating "content" as well as shaping new media platforms calls into question long-held theoretical constructions of the mass audience of consumers as spectators; instead, the audience emerges as a potential economic powerhouse, an underused resource for tomorrow's cultural industries.

Heavy cultural industries

The present recession has prompted scholarly and journalistic questioning of the contributions of the cultural industries to the economy. The talent-rich metropolitan clusters of London and New York are well-placed to ride out a thoroughgoing shakeup of the media markets if they manage their infrastructure, space and resources strategically, as Richard Florida has recently argued. This seems to be the assumption behind the recent Digital Britain interim report, and Gordon Brown's remarks that a digital revolution "lies at the heart" of Britain's economic recovery and that broadband and the media industry can play a leading role in pulling the UK out of the recession. Focusing on the Digital Britain report and consultation documents, this presentation seeks to unpack some of the fundamental assumptions behind this link between digital infrastructure, creativity and profitability. In particular the implicit notion of an engaged audience of users, generating "content" as well as shaping new media platforms calls into question longheld theoretical constructions of the mass audience of consumers as spectators. [From the Author]

Rheological characterisation of solder pastes and isotropic conductive adhesives used for flip-chip assembly

Solder pastes and isotropic conductive adhesives (ICAs) are widely used as a principal bonding medium in the electronic industry. This study investigates the rheological behaviour of the pastes (solder paste and isotropic conductive adhesives) used for flip-chip assembly. Oscillatory stress sweep test are performed to evaluate solid characteristic and cohesiveness of the lead-free solder pastes and isotropic conductive adhesive paste materials. The results show that the G' (storage modulus) is higher than G '' (loss modulus) for the pastes material indicating a solid like behaviour. It result shows that the linear visco-elastic region for the pastes lies in a very small stress range, below 10 Pa. in addition, the stress at which the value of storage modulus is equal to that of loss modulus can be used as an indicator of the paste cohesiveness. The measured cross-over stress at G'=G '' shows that the solder paste has higher stress at G'=G '' compared to conductive adhesives. Creep-recovery test method is used to study the slump behaviour in the paste materials. The conductive adhesive paste shows a good recovery when compared to the solder pastes. (C) 2008 Elsevier B.V. All rights reserved.

Polymer cure modeling for microelectronics applications

A review of polymer cure models used in microelectronics packaging applications reveals no clear consensus of the chemical rate constants for the cure reactions, or even of an effective model. The problem lies in the contrast between the actual cure process, which involves a sequence of distinct chemical reactions, and the models, which typically assume only one, (or two with some restrictions on the independence of their characteristic constants.) The standard techniques to determine the model parameters are based on differential scanning calorimetry (DSC), which cannot distinguish between the reactions, and hence yields results useful only under the same conditions, which completely misses the point of modeling. The obvious solution is for manufacturers to provide the modeling parameters, but failing that, an alternative experimental technique is required to determine individual reaction parameters, e.g. Fourier transform infra-red spectroscopy (FTIR).

A critical analysis of polymer cure modeling for microelectronics applications

A review of polymer cure models used in microelectronics packaging applications reveals no clear consensus of the chemical rate constants for the cure reactions, or even of an effective model. The problem lies in the contrast between the actual cure process, which involves a sequence of distinct chemical reactions, and the models, which typically assume only one, (or two with some restrictions on the independence of their characteristic constants.) The standard techniques to determine the model parameters are based on differential scanning calorimetry (DSC), which cannot distinguish between the reactions, and hence yields results useful only under the same conditions, which completely misses the point of modeling. The obvious solution is for manufacturers to provide the modeling parameters, but failing that, an alternative experimental technique is required to determine individual reaction parameters, e.g. Fourier transform infra-red spectroscopy (FTIR).

‘The Pinocchio Effect’ – when managing the brand creation process, across cultures

In global marketing and international management, the fields of Branding and Culture are well discussed as separate disciplines; within both academia and industry. However, there appears to be limited supporting literature, examining brands and culture as a collective discipline. In addition, environmental factors such as ethnicity, nationality and religion are also seen to play a significant role. This in itself adds to the challenges encountered, by those looking to critically apply learning and frameworks, to any information gathered. In the first instance, this paper tries to bring aspects together from Branding and Culture and in doing so, aims to find linkages between the two. The main purpose of this paper is to distil current brand thinking and explore what impact cross-cultural, cross-national, and ethnic interactions have on a brand’s creation. The position of the authors is that without further understanding in this field, a brand will experience what has been termed by them as the ‘Pinocchio Effect’. Pinocchio was a puppet who longed to become a real human being; but sadly encountered difficulties. The conclusion presented is that the critical long-term success of a brand lies in three areas: how it is created; the subsequent associated perceptions; and more specifically in the reality of the relationships that it enjoys. Collectively these processes necessitate an appraisal of connecting strategic management procedures and thinking. Finally, this paper looks into proposing future methods for brand evaluation and strategic management. The aim is to stimulate further thinking in a field; which transcends national, ethnic and cultural boundaries - in the interests of developing new insight, and to provide a platform for marketers to develop more effective communications.

Heavy cultural industries

The present recession has prompted scholarly and journalistic questioning of the contributions of the cultural industries to the economy. The talent-rich metropolitan clusters of London and New York are well-placed to ride out a thoroughgoing shakeup of the media markets if they manage their infrastructure, space and resources strategically, as Richard Florida has recently argued. This seems to be the assumption behind the recent Digital Britain interim report, and the prime minister's remarks that a digital revolution "lies at the heart" of Britain's economic recovery and that broadband and the media industry can play a leading role in pulling the UK out of the recession. Focusing on the Digital Britain interim report, this presentation seeks to clarify some of the fundamental assumptions behind this link between digital infrastructure, creativity and profitability. [From the Author]

A regional chemostratigraphically-defined correlation framework for the late Triassic TAG-I Formation in Blocks 402 and 405a, Algeria

The Triassic Argilo-Gréseux Inférieur Formation (TAG-I) is one of the principal hydrocarbon reservoirs in the Berkine Basin of Algeria. Sedimentological studies have shown that it exhibits marked spatial and temporal facies variations on both a local field scale and a regional basinal scale. This variability, combined with a lack of diagnostic flora and fauna, makes regional correlation within the unit difficult. In turn, the lack of a consistent regional stratigraphic framework hampers the comparison of the various correlation schemes devised by operators in the basin. Contrasting the TAG-I in Blocks 402 and 405a exemplifies the problems encountered when attempting regionally to define a correlation framework for the interval. Between these two blocks, a distance of approximately 200 km, there are marked changes in the style of deposition from sand-dominated, proximal fluvial systems in the SW (Block 405a, MLN, MLC, KMD and MLNW fields) to a more distal, more clay-prone system in the NE (Block 402, ROD/BRSE/BSFN, SFNE and BSF fields). A chemostratigraphic study of the TAG-I in these two blocks has allowed a four-fold correlation framework to be defined, where each chemostratigraphic package has distinctive geochemical features. Chemostratigraphic Package 10, the oldest unit, lies above the Hercynian Unconformity, but beneath a geochemically identifiable hiatal surface. Chemostratigraphic Package 20 lies above the hiatal surface but is separated from the overlying packages by a mineralogical change identifiable in both claystone and sandstone geochemistry. Chemostratigraphic Packages 30 and 40 are chemically somewhat similar, but are separated by a regional event interpreted as a period of dolocrete and lacustrine development. By combining the geochemical differentiation of the units and recognition of their stratal boundaries, it is possible to define a correlation for the TAG-I between Blocks 402 and 405a. The proposed correlation between the two blocks suggests that the northern parts of Block 405a may have been occupied by a spur or subsidiary channel from the main SW–NE-trending fluvial system, resulting in one of the chemically defined packages being demonstrably absent in the MLNW, MLN, KMD and MLC fields when compared with the other areas of the study.

A genetic marker to separate Emiliania huxleyi (Prymnesiophyceae) morphotypes

Emiliania huxleyi (Lohm.) Hay and Mohler is a ubiquitous unicellular marine alga surrounded by an elaborate covering of calcite platelets called coccoliths. It is an important primary producer involved in oceanic biogeochemistry and climate regulation. Currently, E. huxleyi is separated into five morphotypes based on morphometric, physiological, biochemical, and immunological differences. However, a genetic marker has yet to be found to characterize these morphotypes. With the use of sequence analysis and denaturing gradient gel electrophoresis, we discovered a genetic marker that correlates significantly with the separation of the most widely recognized A and B morphotypes. Furthermore, we reveal that the A morphotype is composed of a number of distinct genotypes. This marker lies within the 3' untranslated region of a coccolith associated protein mRNA, which is implicated in regulating coccolith calcification. Consequently, we tentatively termed this marker the coccolith morphology motif.

Analysis about the society of 'Pa Negre' (Agustí Villaronga, 2010)

This article has developed with the intention of analyzing how the stereotypes, prejudices and lies can influence the education of the children. Formation, that usually comes from family and teachers, who sometimes move for extremist ideologies. There exist multiple fictions in which we observe these social archetypes, but it is the case of the movie Pa negre (Agustí Villaronga, 2010), where the principal personage evolves psychologically, because of that its eyes observe and the ideas that the people transmit him on its family, in the rural environments, where the tradition of the rumors coexists.

Cost Estimation of Machined Parts within an Aerospace Supply Chain

A generic, hierarchical, and multifidelity unit cost of acquisition estimating methodology for outside production machined parts is presented. The originality of the work lies with the method’s inherent capability of being able to generate multilevel and multifidelity cost relations for large volumes of parts utilizing process, supply chain costing data, and varying degrees of part design definition information. Estimates can be generated throughout the life cycle of a part using different grades of the combined information available. Considering design development for a given part, additional design definition may be used as it becomes available within the developed method to improve the quality of the resulting estimate. Via a process of analogous classification, parts are classified into groups of increasing similarity using design-based descriptors. A parametric estimating method is then applied to each subgroup of the machined part commodity in the direction of improved classification and using which, a relationship which links design variables to manufacturing cycle time may be generated. A rate cost reflective of the supply chain is then applied to the cycle time estimate for a given part to arrive at an estimate of make cost which is then totalled with the material and treatments cost components respectively to give an overall estimate of unit acquisition cost. Both the rate charge applied and the treatments cost calculated for a given procured part is derived via the use of ratio analysis.

Assocation Between Variation in the Actin-Binding Gene Caldesmon and Diabetic Nephropathy in Type 1 Diabetes

Dysfunction of the actin cytoskeleton is a key event in the pathogenesis of diabetic nephropathy. We previously reported that certain cytoskeletal genes are upregulated in mesangial cells exposed to a high extracellular glucose concentration. One such gene, caldesmon, lies on chromosome 7q35, a region linked to nephropathy in family studies, making it a candidate susceptibility gene for diabetic nephropathy. We screened all exons, untranslated regions, and a 5-kb region upstream of the gene for variation using denaturing high-performance liquid chromatography technology. An A>G single nucleotide polymorphism (SNP) at position -579 in the promoter region was associated with nephropathy in a case-control study using 393 type 1 diabetic patients from Northern Ireland (odds ratio [OR] 1.38, 95% CI 1.02–1.86, P = 0.03). A similar trend was found in an independent sample from a second center. When the sample groups were combined (n = 606), the association between the -579G allele and nephropathy remained significant (OR 1.35, 1.07–1.70, P = 0.01). The haplotype structure in the surrounding 7-kb region was determined. No single haplotype was more strongly associated with nephropathy than the -579A>G SNP. These results suggest a role for the caldesmon gene in susceptibility to diabetic nephropathy in type 1 diabetes.

Multiwavelength observations of the M15 intermediate-velocity cloud

We present Westerbork Synthesis Radio Telescope HI images, Lovell telescope multibeam H I wide-field mapping, William Herschel Telescope long-slit echelle Ca II observations, Wisconsin Halpha Mapper (WHAM) facility images, and IRAS ISSA 60- and 100-mum co-added images towards the intermediate- velocity cloud (IVC) at + 70 km s(-1), located in the general direction of the M15 globular cluster. When combined with previously published Arecibo data, the H I gas in the IVC is found to be clumpy, with a peak H I column density of similar to1.5 x 10(20) cm(-2), inferred volume density (assuming spherical symmetry) of similar to24 cm(-3)/D (kpc) and a maximum brightness temperature at a resolution of 81 x 14 arcsec(2) of 14 K. The major axis of this part of the IVC lies approximately parallel to the Galactic plane, as does the low- velocity H I gas and IRAS emission. The H I gas in the cloud is warm, with a minimum value of the full width at half-maximum velocity width of 5 km s(-1) corresponding to a kinetic temperature, in the absence of turbulence, of similar to540 K. From the H I data, there are indications of two-component velocity structure. Similarly, the Ca II spectra, of resolution 7 km s(-1), also show tentative evidence of velocity structure, perhaps indicative of cloudlets. Assuming that there are no unresolved narrow-velocity components, the mean values of log(10)[N(Ca II K) cm(2)] similar to 12.0 and Ca II/H I similar to2 5 x 10(-8) are typical of observations of high Galactic latitude clouds. This compares with a value of Ca II/H I>10(-6) for IVC absorption towards HD 203664, a halo star of distance 3 kpc, some 3.degrees1 from the main M15 IVC condensation. The main IVC condensation is detected by WHAM in Halpha with central local-standard-of-rest velocities of similar to60-70 km s(-1), and intensities uncorrected for Galactic extinction of up to 1.3 R, indicating that the gas is partially ionized. The FWHM values of the Halpha IVC component, at a resolution of 1degrees, exceed 30 km s(-1). This is some 10 km s(-1) larger than the corresponding H I value at a similar resolution, and indicates that the two components may not be mixed. However, the spatial and velocity coincidence of the Halpha and H I peaks in emission towards the main IVC component is qualitatively good. If the Halpha emission is caused solely by photoionization, the Lyman continuum flux towards the main IVC condensation is similar to2.7 x 10(6) photon cm(-2) s(-1). There is not a corresponding IVC Halpha detection towards the halo star HD 203664 at velocities exceeding similar to60 km s(- 1). Finally, both the 60- and 100-mum IRAS images show spatial coincidence, over a 0.675 x 0 625 deg(2) field, with both low- and intermediate-velocity H I gas (previously observed with the Arecibo telescope), indicating that the IVC may contain dust. Both the Halpha and tentative IRAS detections discriminate this IVC from high-velocity clouds, although the H I properties do not. When combined with the H I and optical results, these data point to a Galactic origin for at least parts of this IVC.