Refractometry Studies of the Optical Properties of Polymer Films and the Development of Polymer Coated Refractive Index Sensors

Sensors for real-time monitoring of environmental contaminants are essential for protecting ecosystems and human health. Refractive index sensing is a non-selective technique that can be used to measure almost any analyte. Miniaturized refractive index sensors, such as silicon-on-insulator (SOI) microring resonators are one possible platform, but require coatings selective to the analytes of interest. A homemade prism refractometer is reported and used to characterize the interactions between polymer films and liquid or vapour-phase analytes. A camera was used to capture both Fresnel reflection and total internal reflection within the prism. For thin-films (d = 10 μm - 100 μm), interference fringes were also observed. Fourier analysis of the interferogram allowed for simultaneous extraction of the average refractive index and film thickness with accuracies of ∆n = 1-7 ×10-4 and ∆d < 3-5%. The refractive indices of 29 common organic solvents as well as aqueous solutions of sodium chloride, sucrose, ethylene glycol, glycerol, and dimethylsulfoxide were measured at λ = 1550 nm. These measurements will be useful for future calibrations of near-infrared refractive index sensors. A mathematical model is presented, where the concentration of analyte adsorbed in a film can be calculated from the refractive index and thickness changes during uptake. This model can be used with Fickian diffusion models to measure the diffusion coefficients through the bulk film and at the film-substrate interface. The diffusion of water and other organic solvents into SU-8 epoxy was explored using refractometry and the diffusion coefficient of water into SU-8 is presented. Exposure of soft baked SU-8 films to acetone, acetonitrile and methanol resulted in rapid delamination. The diffusion of volatile organic compound (VOC) vapours into polydimethylsiloxane and polydimethyl-co-polydiphenylsiloxane polymers was also studied using refractometry. Diffusion and partition coefficients are reported for several analytes. As a model system, polydimethyl-co-diphenylsiloxane films were coated onto SOI microring resonators. After the development of data acquisition software, coated devices were exposed to VOCs and the refractive index response was assessed. More studies with other polymers are required to test the viability of this platform for environmental sensing applications.

A Global Review on Peri-Urban Development and Planning

Urban regions worldwide are increasingly facing the challenge of dealing with highly dynamic metropolitan growth and, at the same time, institutional changes like decentralisation and globalisation. These kinds of changes express themselves most evidently in peri-urban areas, where urban and rural life meets. These peri-urban areas in particular have been the stage for rapid physical, social and economic transformations, both in developed and developing countries. Peri-urbanization takes place here. Based on literature review, this paper presents an effort to identify generic attributes of peri-urbanisation and the way in which development planning tends to reply. Three major attributes are identified: peri-urban space (the spatial expression of peri-urban development), peri-urban life (the functional appearance of land uses, activities and peri-urban innovation), and peri-urban change (a causal and temporal perspective featuring flows and drivers of change). It is also shown that prevalent institutional replies in planning and development generally fail to acknowledge the dynamic and increasingly fragmented attributes of global peri-urbanisation.

A look into diversity in the radio and music industry in Spain

UNESCO’s approval of the Convention on the Protection and Promotion of the Diversity of Cultural Expressions (UNESCO, 2005) has been an important element in catalyzing any attempt to measure the diversity of cultural industries (UIS, 2011). Within this framework, this article analyzes the relations between the music and radio industries in Spain from a critical perspective through the analysis of available data on recorded music offer and consumption (sales lists, radio-formula lists, the characteristics of the phonographic and radio markets) in different key moments due to the emergence of new formats and devices (CDS, Mp3, Internet).The main goal of this work is to study the evolution of the Spanish record market in terms of diversity from the end of the 1970s to the present, through the study of radio music hits lists and, the business structure of the phonographic and radio sectors, and phonograms top sales

Individual-based modelling of the development and transport of a Karenia mikimotoi bloom on the North-West European continental shelf

In 2006, a large and prolonged bloom of the dinoflagellate Karenia mikimotoi occurred in Scottish coastal waters, causing extensive mortalities of benthic organisms including annelids and molluscs and some species of fish ( Davidson et al., 2009). A coupled hydrodynamic-algal transport model was developed to track the progression of the bloom around the Scottish coast during June–September 2006 and hence investigate the processes controlling the bloom dynamics. Within this individual-based model, cells were capable of growth, mortality and phototaxis and were transported by physical processes of advection and turbulent diffusion, using current velocities extracted from operational simulations of the MRCS ocean circulation model of the North-west European continental shelf. Vertical and horizontal turbulent diffusion of cells are treated using a random walk approach. Comparison of model output with remotely sensed chlorophyll concentrations and cell counts from coastal monitoring stations indicated that it was necessary to include multiple spatially distinct seed populations of K. mikimotoi at separate locations on the shelf edge to capture the qualitative pattern of bloom transport and development. We interpret this as indicating that the source population was being transported northwards by the Hebridean slope current from where colonies of K. mikimotoi were injected onto the continental shelf by eddies or other transient exchange processes. The model was used to investigate the effects on simulated K. mikimotoi transport and dispersal of: (1) the distribution of the initial seed population; (2) algal growth and mortality; (3) water temperature; (4) the vertical movement of particles by diurnal migration and eddy diffusion; (5) the relative role of the shelf edge and coastal currents; (6) the role of wind forcing. The numerical experiments emphasized the requirement for a physiologically based biological model and indicated that improved modelling of future blooms will potentially benefit from better parameterisation of temperature dependence of both growth and mortality and finer spatial and temporal hydrodynamic resolution.

Individual-based modelling of the development and transport of a Karenia mikimotoi bloom on the North-West European continental shelf

In 2006, a large and prolonged bloom of the dinoflagellate Karenia mikimotoi occurred in Scottish coastal waters, causing extensive mortalities of benthic organisms including annelids and molluscs and some species of fish ( Davidson et al., 2009). A coupled hydrodynamic-algal transport model was developed to track the progression of the bloom around the Scottish coast during June–September 2006 and hence investigate the processes controlling the bloom dynamics. Within this individual-based model, cells were capable of growth, mortality and phototaxis and were transported by physical processes of advection and turbulent diffusion, using current velocities extracted from operational simulations of the MRCS ocean circulation model of the North-west European continental shelf. Vertical and horizontal turbulent diffusion of cells are treated using a random walk approach. Comparison of model output with remotely sensed chlorophyll concentrations and cell counts from coastal monitoring stations indicated that it was necessary to include multiple spatially distinct seed populations of K. mikimotoi at separate locations on the shelf edge to capture the qualitative pattern of bloom transport and development. We interpret this as indicating that the source population was being transported northwards by the Hebridean slope current from where colonies of K. mikimotoi were injected onto the continental shelf by eddies or other transient exchange processes. The model was used to investigate the effects on simulated K. mikimotoi transport and dispersal of: (1) the distribution of the initial seed population; (2) algal growth and mortality; (3) water temperature; (4) the vertical movement of particles by diurnal migration and eddy diffusion; (5) the relative role of the shelf edge and coastal currents; (6) the role of wind forcing. The numerical experiments emphasized the requirement for a physiologically based biological model and indicated that improved modelling of future blooms will potentially benefit from better parameterisation of temperature dependence of both growth and mortality and finer spatial and temporal hydrodynamic resolution.

El surgimiento de HTML5; un nuevo paradigma en los estándares Web

Gracias al crecimiento, expansión y popularización de la World Wide Web, su desarrollo tecnológico tiene una creciente importancia en la sociedad. La simbiosis que protagonizan estos dos entornos ha propiciado una mayor influencia social en las innovaciones de la plataforma y un enfoque mucho más práctico. Nuestro objetivo en este artículo es describir, caracterizar y analizar el surgimiento y difusión del nuevo estándar de hipertexto que rige la Web; HTML5. Al mismo tiempo exploramos este proceso a la luz de varias teorías que aúnan tecnología y sociedad. Dedicamos especial atención a los usuarios de la World Wide Web y al uso genérico que realizan de los Medios Sociales o "Social Media". Sugerimos que el desarrollo de los estándares web está influenciado por el uso cotidiano de este nuevo tipo de tecnologías y aplicaciones. 

Learning for self-regulation: Improving instructional benefits for pupils, teachers, parents, schools, and society at large

Compulsory education laws oblige primary and secondary schools to give each pupil positive encouragement in, for example, social, emotional, cognitive, creative, and ethical respects. This is a fairly smooth process for most pupils, but it is not as easy to achieve with others. A pattern of pupil, home or family, and school variables turns out to be responsible for a long-term process that may lead to a pupil’s dropping out of education. A systemic approach will do much to introduce more clarity into the diagnosis, potential reduction and possible prevention of some persistent educational problems that express themselves in related phenomena, for example low school motivation and achievement; forced underachievement of high ability pupils; concentration of bullying and violent behaviour in and around some types of classes and schools; and drop-out percentages that are relatively constant across time. Such problems have a negative effect on pupils, teachers, parents, schools, and society alike. In this address, I would therefore like to clarify some of the systemic causes and processes that we have identified between specific educational and pupil characteristics. Both theory and practice can assist in developing, implementing, and checking better learning methods and coaching procedures, particularly for pupils at risk. This development approach will take time and require co-ordination, but it will result in much better processes and outcomes than we are used to. First, I will diagnose some systemic aspects of education that do not seem to optimise the learning processes and school careers of some types of pupils in particular. Second, I will specify cognitive, social, motivational, and self-regulative aspects of learning tasks and relate corresponding learning processes to relevant instructional and wider educational contexts. I will elaborate these theoretical notions into an educational design with systemic instructional guidelines and multilevel procedures that may improve learning processes for different types of pupils. Internet-based Information and Communication Technology, or ICT, also plays a major role here. Third, I will report on concrete developments made in prototype research and trials. The development process concerns ICT-based differentiation of learning materials and procedures, and ICT-based strategies to improve pupil development and learning. Fourth, I will focus on the experience gained in primary and secondary educational practice with respect to implementation. We can learn much from such practical experience, in particular about the conditions for developing and implementing the necessary changes in and around schools. Finally, I will propose future research. As I hope to make clear, theory-based development and implementation research can join forces with systemic innovation and differentiated assessment in educational practice, to pave the way for optimal “learning for self-regulation” for pupils, teachers, parents, schools, and society at large.

Progress and Research in Cybersecurity - Supporting a resilient and trustworthy system for the UK

Executive summary
Digital systems have transformed, and will continue to transform, our world. Supportive government policy, a strong research base and a history of industrial success make the UK particularly well-placed to realise the benefits of the emerging digital society. These benefits have already been substantial, but they remain at risk. Protecting the benefits and minimising the risks requires reliable and robust cybersecurity, underpinned by a strong research and translation system.
Trust is essential for growing and maintaining participation in the digital society. Organisations earn trust by acting in a trustworthy manner: building systems that are reliable and secure, treating people, their privacy and their data with respect, and providing credible and comprehensible information to help people understand how secure they are.
Resilience, the ability to function, adapt, grow, learn and transform under stress or in the face of shocks, will help organisations deliver systems that are reliable and secure. Resilient organisations can better protect their customers, provide more useful products and services, and earn people’s trust.
Research and innovation in industry and academia will continue to make important contributions to creating this resilient and trusted digital environment. Research can illuminate how best to build, assess and improve digital systems, integrating insights from different disciplines, sectors and around the globe. It can also generate advances to help cybersecurity keep up with the continued evolution of cyber risks.
Translation of innovative ideas and approaches from research will create a strong supply of reliable, proven solutions to difficult to predict cybersecurity risks. This is best achieved by maximising the diversity and number of innovations that see the light of day as products.
Policy, practice and research will all need to adapt. The recommendations made in this report seek to set up a trustworthy, self-improving and resilient digital environment that can thrive in the face of unanticipated threats, and earn the trust people place in it.
Innovation and research will be particularly important to the UK’s economy as it establishes a new relationship with the EU. Cybersecurity delivers important economic benefits, both by underpinning the digital foundations of UK business and trade and also through innovation that feeds directly into growth. The findings of this report will be relevant regardless of how the UK’s relationship to the EU changes.
Headline recommendations
● Trust: Governments must commit to preserving the robustness of encryption, including end-to-end encryption, and promoting its widespread use. Encryption is a foundational security technology that is needed to build user trust, improve security standards and fully realise the benefits of digital systems.
● Resilience: Government should commission an independent review of the UK’s future cybersecurity needs, focused on the institutional structures needed to support resilient and trustworthy digital systems in the medium and longer term. A self-improving, resilient digital environment will need to be guided and governed by institutions that are transparent, expert and have a clear and widely-understood remit.
● Research: A step change in cybersecurity research and practice should be pursued; it will require a new approach to research, focused on identifying ambitious high-level goals and enabling excellent researchers to pursue those ambitions. This would build on the UK's existing strengths in many aspects of cybersecurity research and ultimately help build a resilient and trusted digital sector based on excellent research and world-class expertise.
● Translation: The UK should promote a free and unencumbered flow of cybersecurity ideas from research to practical use and support approaches that have public benefits beyond their short term financial return. The unanticipated nature of future cyber threats means that a diverse set of cybersecurity ideas and approaches will be needed to build resilience and adaptivity. Many of the most valuable ideas will have broad security benefits for the public, beyond any direct financial returns.

Asymmetric hydrogen flame in a heated micro-channel: role of Darrieus-Landau and thermal-diffusive instabilities

Present work examines numerically the asymmetric behavior of hydrogen/air flame in a micro-channel subjected to a non-uniform wall temperature distribution. A high resolution (with cell size of 25 μm × 25 μm) of two-dimensional transient Navier–Stokes simulation is conducted in the low-Mach number formulation using detailed chemistry evolving 9 chemical species and 21 elementary reactions. Firstly, effects of hydrodynamic and diffusive-thermal instabilities are studied by performing the computations for different Lewis numbers. Then, the effects of preferential diffusion of heat and mass transfer on the asymmetric behavior of the hydrogen flame are analyzed for different inlet velocities and equivalence ratios. Results show that for the flames in micro-channels, interactions between thermal diffusion and molecular diffusion play major role in evolution of a symmetric flame into an asymmetric one. Furthermore, the role of Darrieus–Landau instability found to be minor. It is also found that in symmetric flames, the Lewis number decreases behind the flame front. This is related to the curvature of flame which leads to the inclination of thermal and mass fluxes. The mass diffusion vectors point toward the walls and the thermal diffusion vectors point toward the centerline. Asymmetric flame is observed when the length of flame front is about 1.1–1.15 times of the channel width.

Interpreting innovation – in another way

Innovation helps to uncover the future social and economic possibilities. Subsequently familiarising with innovation processes, mapping those involved in innovation and researching the relations and influencing factors is becoming more and more valuable. The authors carried out innovation research in three middle-sized and small towns in Hungary on the basis of a request by a municipality among enterprises involved in the intelligent specialisation strategic program. In the course of the research the role of regional universities, the relationship between organisations involved in social innovation and the researched enterprises, as well as traditional innovation areas were dealt with. The innovation performance of enterprises in all three regions are – despite smaller differences – around the Hungarian average. The presence of a university in the region can be felt, however, it does not remarkably influence the innovation potential of enterprises. It seemed that outside the traditional links to chambers of commerce and industry there were no other civic protagonists in the processes of creating knowledge, and even the relations are rather loose, or mediocre. In the wake of these results, the authors formulated specific suggestions for improving the economic and social possibilities of the involved regions by establishing innovative environments.

The Legitimacy Process that Supports the Formation and Development of Cluster Initiatives : The Case of a Tourism Cluster Initiative in Dalarna

Today, large public investments are being made with the aim of creating and developing cooperation between businesses in inter-organizational networks. Such initiatives are commonly denoted cluster initiatives and their underlying purpose are to spur innovation and regional growth. Much research has been conducted in this field, but relatively few studies have examined the process of cluster initiatives. By following the case of a regional cluster project within the tourism industry in the region of Dalarna, Sweden, the objective of this thesis is to deepen the understanding of the formation and development process of cluster initiatives. The investigation has been conducted by examining two main themes; the internal relationships within the cluster initiative and the relationships between the cluster initiative and its external stakeholders, such as funding agencies, regional government and local businesses. The analysis is based on a legitimacy perspective and indicates that the coordinating body of the cluster initiative, the hub, principally deals with a legitimation process. What occurs within the cluster initiative, between the members themselves and between the members and the hub, is legitimation. This also applies to external relationships, between the hub and its external stakeholders. A prerequisite for the realization of its mission is that the hub obtain and sustain legitimacy; legitimacy for itself, for the other members, for the idea, for the different activities and for the industry as such.

Standard Essential Patent in Telecommunication Standard: United States and China Comparison

Thesis (Ph.D.)--University of Washington, 2016-08

Moisture Desorption Studies on Polymer Hydrated and Vacuum Extruded Bentonite Clay Mat

Moisture desorption observations from two bentonite clay mats subjected to ten environmental zones with individually different combinations of laboratory-controlled constant temperatures (between 20 °C and 40 °C) and relative humidity (between 15% and 70%) are presented. These laboratory observations are compared with predictions from mathematical models, such as thin-layer drying equations and kinetic drying models proposed by Page, Wang and Singh, and Henderson and Pabis. The quality of fit of these models is assessed using standard error (SE) of estimate, relative percent of error, and coefficient of correlation. The Page model was found to better predict the drying kinetics of the bentonite clay mats for the simulated tropical climates. Critical study on the drying constant and moisture diffusion coefficient helps to assess the efficacy of a polymer to retain moisture and control desorption through water molecule bonding. This is further substantiated with the Guggenheim–Anderson–De Boer (GAB) desorption isotherm model which is presented.