A combined strength and balance exercise program to decrease falls risk in dialysis patients : a feasibility study

People suffering end-stage kidney disease receiving hemodialysis have a greater risk of falling and suffering debilitating injuries. The purpose of this study was to examine the feasibility and impact of a combined strength and balance exercise intervention on falls risk in hemodialysis patients. Twenty-four adults (mean age = 67.8 yrs) from two Australian outpatient hemodialysis clinics completed the intervention. Falls risk was measured using the Physiological Profile Assessment (PPA). There was a significant reduction in the median overall falls risk z-score from 1.67 to .52 (z = -3.11, P<.008; r = .45). Median reaction time improved from .30 to .26 sec (z = -2.86, P<.008; r = .41). A strength and balance intervention to reduce the falls risk for dialysis patients is feasible and may reduce falls risk for at risk patients.

Nanoscale precipitation in advanced high strength steels

Precipitation strenghthening is one of the most important approaches for enhancing the strenght of microalloyed steels. This study has made a significant contribution in understanding the nucleation and growth mechanism of nanoscale interphase precipitates in steel during commercial processes. Atom Probe Tomography revealed the existence of nanoscale clusters with precipitates that then dictate the final strength.

Lightweight stiffened composite structure with superior bending strength and stiffness for automotive floor applications

The trend towards smaller and lighter, more environmentally friendly vehicles is accelerating, as the petrol price rises and the CO2 reduction target becomes more strict. As a key enabling technology, light-weight but low-cost structure plays an important role in promoting the use of fibre reinforced polymer matrix composites in automotive applications. In this work an experimental investigiation is carried out to design, manufacture and analyse a stiffened composite structure, aiming at achieving required bending and torsional strength and stiffness at the minimum weight. One major application of this new lightweight structure is the load-bearing floor component. Some initial results from this work are presented in this paper.

Differentiated mTOR but not AMPK signaling after strength vs endurance exercise in training-accustomed individuals

The influence of adenosine mono phosphate (AMP)-activated protein kinase (AMPK) vs Akt-mammalian target of rapamycin C1 (mTORC1) protein signaling mechanisms on converting differentiated exercise into training specific adaptations is not well-established. To investigate this, human subjects were divided into endurance, strength, and non-exercise control groups. Data were obtained before and during post-exercise recovery from single-bout exercise, conducted with an exercise mode to which the exercise subjects were accustomed through 10 weeks of prior training. Blood and muscle samples were analyzed for plasma substrates and hormones and for muscle markers of AMPK and Akt-mTORC1 protein signaling. Increases in plasma glucose, insulin, growth hormone (GH), and insulin-like growth factor (IGF)-1, and in phosphorylated muscle phospho-Akt substrate (PAS) of 160 kDa, mTOR, 70 kDa ribosomal protein S6 kinase, eukaryotic initiation factor 4E, and glycogen synthase kinase 3α were observed after strength exercise. Increased phosphorylation of AMPK, histone deacetylase5 (HDAC5), cAMP response element-binding protein, and acetyl-CoA carboxylase (ACC) was observed after endurance exercise, but not differently from after strength exercise. No changes in protein phosphorylation were observed in non-exercise controls. Endurance training produced an increase in maximal oxygen uptake and a decrease in submaximal exercise heart rate, while strength training produced increases in muscle cross-sectional area and strength. No changes in basal levels of signaling proteins were observed in response to training. The results support that in training-accustomed individuals, mTORC1 signaling is preferentially activated after hypertrophy-inducing exercise, while AMPK signaling is less specific for differentiated exercise.

Gamblers' habit

The theories used to understand and predict regular non-problem gambling are almost exclusively affective or cognitive-oriented. These include motives, self-esteem, image enhancement and illusions of control over random events. However, gambling is one of the most frequently purchased consumer products, and the frequency of past behavior has traditionally been viewed as “habit” by psychologists and marketers. While habit as the frequency of past behavior has been shown to be a strong predictor of future behavior in gambling, habit offers little additional insight into gambling behavior in that form.

The frequency of past purchasing behavior is an important input to NBD-Dirichlet models that provide an enhanced ability to understand and predict future purchases of frequently purchased consumer package goods. NBD-Dirichlet models have been shown to provide an excellent fit to data for a broad range of frequently purchased goods and services for countries across the world. Applications of the NBD-Dirichlet models to data concerning gambling behavior show that these models consistently provide an even closer fit to the data than with other consumer models tested.

The interpretation of NBD-Dirichlet output can provide more accurate benchmarks than cognitive or affective output to test changes to the gambling environment (e.g., more games, new games, warnings) and to gamblers (e.g., problem gambling). The implications and use of the NBD-Dirichlet statistics for gambling providers and public policy is discussed.

A novel trust measurement method based on certified belief in strength for a multi-agent classifier system

A novel trust measurement method, namely, certified belief in strength (CBS), for a multi-agent classifier system (MACS) is proposed in this paper. The CBS method aims to improve the performance of the constituent agents of the MACS, viz., the fuzzy min-max (FMM) neural network classifier. Trust measurement is accomplished using reputation and strength of the constituent agents. Trust is built from strong elements that are associated with the FMM agents, allowing the CBS method to improve the performance of the MACS. An auction procedure based on the sealed bid, namely, the first price method, is adopted for the MACS in determining the winning agent. The effectiveness of the CBS method and the bond (based on trust) is verified by using a number of benchmark data sets. The results demonstrate that the proposed MACS-CBS model is able to produce better accuracy and stability as compared with those from other existing methods. © 2012 Springer-Verlag London.

Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds

Friction stir lap welding (FSLW) experiments have been conducted to study the effects of tool positioning on microstructures formed in the Al-to-steel interface region and on joint strength, defined as maximum applied force over the width (F m/w s) of the test sample, of the welds. Various pin positioning and speed conditions were used in the FSLW experiments followed by microstructure examination on the interface regions and tensile-shear testing on the welds, including an examination on crack propagation in mixed stir zone. It was found that when the pin was close to the bottom steel piece, Al-to-steel reaction occurred resulting in intermetallic outbursts formed along the interface. This represents the case of incomplete metallurgical joint. When the pin was lowered to just reach the steel, a thin and continued interface intermetallic layer formed. Evidences and consideration on growth kinetics have suggested that the layer could only remain thin (≤2.5 μm) during FSLW. This layer could bear a high load during tensile-shear testing and the adjacent aluminium deformed and fractured instead. The resulting F m/w s was high. When the pin penetrated to steel, F m/w s reduced due to brittle fracture being dominant inside mixed stir zone. Evidences have shown that the amount of penetration and speed condition during FSLW do not have large effects on F m/w s.

The effects of whole-body vibration on the cross-transfer of strength

This study investigated whether the use of superimposed whole-body vibration (WBV) during cross-education strength training would optimise strength transfer compared to conventional cross-education strength training. Twenty-one healthy, dominant right leg volunteers (21±3 years) were allocated to a strength training (ST, m = 3, f = 4), a strength training with WBV (ST + V, m = 3, f = 4), or a control group (no training, m = 3, f = 4). Training groups performed 9 sessions over 3 weeks, involving unilateral squats for the right leg, with or without WBV (35 Hz; 2.5mm amplitude). All groups underwent dynamic single leg maximum strength testing (1RM) and single and paired pulse transcranial magnetic stimulation (TMS) prior to and following training. Strength increased in the trained limb for the ST (41%; ES = 1.14) and ST + V (55%; ES = 1.03) groups, which resulted in a 35% (ES = 0.99) strength transfer to the untrained left leg for the ST group and a 52% (ES = 0.97) strength transfer to the untrained leg for the ST + V group, when compared to the control group. No differences in strength transfer between training groups were observed (P = 0.15). For the untrained leg, no differences in the peak height of recruitment curves or SICI were observed between ST and ST + V groups (P = 1.00). Strength training with WBV does not appear to modulate the cross-transfer of strength to a greater magnitude when compared to conventional cross-education strength training.

Multiscale modelling of stress and strain partitioning in high strength dual phase steels

Multiscale modelling of stress and strain partitioning in DP steel was carried out using both realistic microstructure-based RVE models as well as stochastic microstructures generated by Monte Carlo method. The stochastic microstructure models were shown to resemble that of realistic microstructures, enabling research on the specific aspects of the microstructure that could be difficult to control and study during experimental work. One such feature of the realistic microstructures studied in this work was the grain size and microstructure morphology. The microstructures were generated with varying average grain sizes while all other parameters, such as boundary conditions, material properties and volume fractions of martensite and ferrite were kept constant. It is found that the effect of grain size is much more pronounced during the initial localisation of the plastic deformation at and around the interface of the phases. In addition, the decrease in ductility and increase in strength of the DP steels are directly related to the refinement of grain sizes of each phase and the stress-strain partitioning in between them.

Anodal tDCS applied during strength training enhances motor cortical plasticity

Purpose:
The objective of this study was to assess the effect of anodal transcranial direct current stimulation (a-tDCS) on voluntary dynamic strength and cortical plasticity when applied during a 3-wk strength training program for the wrist extensors.

Methods:
Thirty right-handed participants were randomly allocated to the tDCS, sham, or control group. The tDCS and sham group underwent 3 wk of heavy-load strength training of the right wrist extensors, with 20 min of a-tDCS (2 mA) or sham tDCS applied during training (double blinded). Outcome measures included voluntary dynamic wrist extension strength, muscle thickness, corticospinal excitability, short-interval intracortical inhibition (SICI), and silent period duration.

Results:
Maximal voluntary strength increased in both the tDCS and sham groups (14.89% and 11.17%, respectively, both P < 0.001). There was no difference in strength gain between the two groups (P = 0.229) and no change in muscle thickness (P = 0.15). The tDCS group demonstrated an increase in motor-evoked potential amplitude at 15%, 20%, and 25% above active motor threshold, which was accompanied by a decrease in SICI during 50% maximal voluntary isometric contraction and 20% maximal voluntary isometric contraction (all P < 0.05). Silent period decreased for both the tDCS and sham groups (P < 0.001).

Conclusion:
The application of a-tDCS in combination with strength training of the wrist extensors in a healthy population did not provide additional benefit for voluntary dynamic strength gains when compared with standard strength training. However, strength training with a-tDCS appears to differentially modulate cortical plasticity via increases in corticospinal excitability and decreases in SICI, which did not occur following strength training alone