Spatial and energetic mode dynamics of cold atomic systems

In this thesis we relate the formal description of various cold atomic systems in the energy eigenbasis, to the observable spatial mode dynamics. Herein the `spatial mode dynamics' refers to the direction of photon emission following the spontaneous emission of an excited fermion in the presence of a same species and spin ideal anisotropic Fermi sea in its internal ground state. Due to the Pauli principle, the presence of the ground state Fermi sea renders the phase space, anisotropic and only partially accessible, thereby a ecting the direction of photon emission following spontaneous emission. The spatial and energetic mode dynamics also refers to the quantum `tunneling' interaction between localised spatial modes, synonymous with double well type potentials. Here we relate the dynamics of the wavefunction in both the energetic and spatial representations. Using this approach we approximate the relationship between the spatial and energetic representations of a wavefunction spanning three spatial and energetic modes. This is extended to a process known as Spatial Adiabatic Passage, which is a technique to transport matter waves between localised spatial modes. This approach allows us to interpret the transport of matter waves as a signature of a geometric phase acquired by the one of the internal energy eigenstates of the system during the cyclical evolution. We further show that this geometric phase may be used to create spatial mode qubit and qutrit states.

Characteristics of the wave energy resource at the Atlantic marine energy test site

The wave energy industry is progressing towards an advanced stage of development, with consideration being given to the selection of suitable sites for the first commercial installations. An informed, and accurate, characterisation of the wave energy resource is an essential aspect of this process. Ireland is exposed to an energetic wave climate, however many features of this resource are not well understood. This thesis assesses and characterises the wave energy resource that has been measured and modelled at the Atlantic Marine Energy Test Site, a facility for conducting sea trials of floating wave energy converters that is being developed near Belmullet, on the west coast of Ireland. This characterisation process is undertaken through the analysis of metocean datasets that have previously been unavailable for exposed Irish sites. A number of commonly made assumptions in the calculation of wave power are contested, and the uncertainties resulting from their application are demonstrated. The relationship between commonly used wave period parameters is studied, and its importance in the calculation of wave power quantified, while it is also shown that a disconnect exists between the sea states which occur most frequently at the site and those that contribute most to the incident wave energy. Additionally, observations of the extreme wave conditions that have occurred at the site and estimates of future storms that devices will need to withstand are presented. The implications of these results for the design and operation of wave energy converters are discussed. The foremost contribution of this thesis is the development of an enhanced understanding of the fundamental nature of the wave energy resource at the Atlantic Marine Energy Test Site. The results presented here also have a wider relevance, and can be considered typical of other, similarly exposed, locations on Ireland’s west coast.

Shining light on food microbiology; applications of luciferase-tagged microorganisms in the food industry

Bioluminescence is the production of light by living organisms as a result of a number of enzyme catalysed reactions caused by enzymes termed luciferases. The lux genes responsible for the emission of light can be cloned from one bioluminescent microorganism into one that is not bioluminescent. The light emitted can be monitored and quantified and will provide information on the metabolic activity, quantity and location of cells in a particular environment, in real-time. The primary aim of this thesis was to investigate and identify several food industry related applications of lux-tagged microorganisms. The first aim was to monitor a lux-tagged Cronobacter sakazakii in reconstituted infant milk formula, in realtime. The second aim was to investigate a bioluminescent-based early warning system for starter culture disruption by bacteriophages and antibiotic residues. The third of this thesis was to examine the use of a bioluminescent-based assay to test the activity of bioengineered Nisin derivatives M21V and S29A against foodborne pathogens in laboratory media and selected foods.

“Green preservatives” – combating fungi in the food industry by applying antifungal lactic acid bacteria

Fungal spoilage is the most common type of microbial spoilage in food leading to significant economical and health problems throughout the world. Fermentation by lactic acid bacteria (LAB) is one of the oldest and most economical methods of producing and preserving food. Thus, LAB can be seen as an interesting tool in the development of novel bio-preservatives for food industry. The overall objective of this study was to demonstrate, that LAB can be used as a natural way to improve the shelf-life and safety of a wide range of food products. In the first part of the thesis, 116 LAB isolates were screened for their antifungal activity against four Aspergillus and Penicillium spp. commonly found in food. Approximately 83% of them showed antifungal activity, but only 1% showed a broad range antifungal activity against all tested fungi. The second approach was to apply LAB antifungal strains in production of food products with extended shelf-life. L. reuteri R29 strain was identified as having strong antifungal activity in vitro, as well as in sourdough bread against Aspergillus niger, Fusarium culmorum and Penicillium expansum. The ability of the strain to produce bread of good quality was also determined using standard baking tests. Another strain, L. amylovorus DSM19280, was also identified as having strong antifungal activity in vitro and in vivo. The strain was used as an adjunct culture in a Cheddar cheese model system and demonstrated the inhibition of P. expansum. Significantly, its presence had no detectable negative impact on cheese quality as determined by analysis of moisture, salt, pH, and primary and secondary proteolysis. L. brevis PS1 a further strain identified during the screening as very antifungal, showed activity in vitro against common Fusarium spp. and was used in the production of a novel functional wortbased alcohol-free beverage. Challenge tests performed with F. culmorum confirmed the effectiveness of the antifungal strain in vivo. The shelf-life of the beverage was extended significantly when compared to not inoculated wort sample. A range of antifungal compounds were identified for the 4 LAB strains, namely L. reuteri ee1p, L. reuteri R29, L. brevis PS1 and L. amylovorous DSM20531. The identification of the compounds was based on liquid chromatography interfaced to the mass spectrometer and PDA detector

Investigation of lactic acid bacteria mediated bioprotection with applications in cereal industry. Case-study: malting process

Antifungal compounds produced by Lactic acid bacteria (LAB) metabolites can be natural and reliable alternative for reducing fungal infections pre- and post-harvest with a multitude of additional advantages for cereal-base products. Toxigenic and spoilage fungi are responsible for numerous diseases and economic losses. This thesis includes an overview of the impact fungi have on aspects of the cereal food chain. The applicability of LAB in plant protection and cereal industry is discussed in detail. Specific case studies include Fusarium head blight, and the impact of fungi in the malting and baking industry. The impact of Fusarium culmorum infected raw barley on the final malt quality was part of the investigation. In vitro infected barley grains were fully characterized. The study showed that the germinative energy of infected barley grains decreased by 45% and grains accumulated 199 μg.kg-1 of deoxynivalenol (DON). Barley grains were subsequently malted and fully characterized. Fungal biomass increased during all stages of malting. Infected malt accumulated 8-times its DON concentration during malting. Infected malt grains revealed extreme structural changes due to proteolytic, (hemi)-cellulolytic and starch degrading activity of the fungi, this led to increased friability and fragmentation. Infected grains also had higher protease and β-glucanase activities, lower amylase activity, a greater proportion of free amino and soluble nitrogen, and a lower β-glucan content. Malt loss was over 27% higher in infected malt when compared to the control. The protein compositional changes and respective enzymatic activity of infected barley and respective malt were characterized using a wide range of methods. F. culmorum infected barley grains showed an increase in proteolytic activity and protein extractability. Several metabolic proteins decreased and increased at different rates during infection and malting, showing a complex F. culmorum infection interdependence. In vitro F. culmorum infected malt was used to produce lager beer to investigate changes caused by the fungi during the brewing processes and their effect on beer quality attributes. It was found, that the wort containing infected malt had a lower pH, a higher FAN, higher β-glucan and a 45% increase in the purging rate, and led to premature yeast flocculation. The beer produced with infected malt (IB) had also a significantly different amino acid profile. IB flavour characterization revealed a higher concentration of esters, fusel alcohols, fatty acids, ketones, and dimethylsulfide, and in particular, acetaldehyde, when compared to the control. IB had a greater proportion of Strecker aldehydes and Maillard products contributing to an increased beer staling character. IB resulted in a 67% darker colour with a trend to better foam stability. It was also found that 78% of the accumulated mycotoxin deoxynivalenol in the malt was transferred into beer. A LAB cell-freesupernatant (cfs), produced in wort-base substrate, was investigated for its ability to inhibit Fusarium growth during malting. Wort was a suitable substrate for LAB exhibiting antifungal activity. Lactobacillus amylovorus DSM19280 inhibited 104 spores.mL-1 for 7 days, after 120 h of fermentation, while Lactobacillus reuteri R29 inhibited 105 spores.mL-1 for 7 days, after 48 h of fermentation. Both LAB cfs had significant different organic acid profiles. Acid-base antifungal compounds were identified and, phenyllactic, hydroxy-phenyllactic, and benzoic acids were present in higher concentrations when compared to the control. A 3 °P wort substrate inoculated With L. reuteri R29 (cfs) was applied in malting and successfully inhibited Fusarium growth by 23%, and mycotoxin DON by 80%. Malt attributes resulted in highly modified grains, lower pH, higher colouration, and higher extract yield. The implementation of selected LAB producing antifungal compounds can be used successfully in the malting process to reduce mould growth and mycotoxin production.

Empirical Evidence on Relationships between Ex Ante Innovation Pursuit and Post-M&A Performance in the Vietnamese M&A Industry, 2005-2012

This research aims to communicate new results of empirical investigations to learn about the relationship between determination of controlling an acquired firm’s capital, assets and brand versus its capability of innovation and ex post performance of the rising Vietnamese M&A industry in the 2005-2012 period. The analysis employs a categorical data sample, consisting of 212 M&A cases reported by various information sources, and performs a number of logistic regressions with significant results as follows. Firstly, the overall relationship between pre-M&A pursuit’s determination on acquiring resources and performance of the post-M&A performance is found significant. There exist profound effects of a ‘size matters’ strategy in M&A ex post performance. When there is an overwhelming ‘resources acquiring’ strategy, the innovation factor’s explanatory power becomes negligible. Secondly, for negative performance of post-M&A operations, the emphasis on both capital base and asset size, and the brand value at the time of the M&A pursuit is the major explanation in the post-M&A period. So does the absence of innovation as a goal in the pre-M&A period. These two insights together are useful in careful M&A planning. Lastly, expensive pre-M&A expenditures tend to adversely affect the post-M&A performance. As a general conclusion, this study shows that innovation can be an important factor to pursue in M&A transitions, together with the need to emphasize and find capable and willing human capital, rather than a capital base (equity or debt) and existing values of the acquired brands.

Cost of innovation in the pharmaceutical industry.

The research and development costs of 93 randomly selected new chemical entities (NCEs) were obtained from a survey of 12 U.S.-owned pharmaceutical firms. These data were used to estimate the pre-tax average cost of new drug development. The costs of abandoned NCEs were linked to the costs of NCEs that obtained marketing approval. For base case parameter values, the estimated out-of-pocket cost per approved NCE is $114 million (1987 dollars). Capitalizing out-of-pocket costs to the point of marketing approval at a 9% discount rate yielded an average cost estimate of $231 million (1987 dollars).

Furnishing a Globalized World: Local Distinctiveness in the International Furniture Industry

Advances in technology, communication, and transportation over the past thirty years have led to tighter linkages and enhanced collaboration across traditional borders between nations, institutions, and cultures. This thesis uses the furniture industry as a lens to examine the impacts of globalization on individual countries and companies as they interact on an international scale. Using global value chain analysis and international trade data, I break down the furniture production process and explore how countries have specialized in particular stages of production to differentiate themselves from competitors and maximize the benefits of global involvement. Through interviews with company representatives and evaluation of branding strategies such as advertisements, webpages, and partnerships, I investigate across four country cases how furniture companies construct strong brands in an effort to stand out as unique to consumers with access to products made around the globe. Branding often serves to highlight distinctiveness and associate companies with national identities, thus revealing that in today’s globalized and interconnected society, local differences and diversity are more significant than ever.

NAFTA and uneven development in the North American apparel industry

The various contributions to this book have documented how NAFTA-inspired firm strategies are changing the geography of apparel production in North America. The authors show in myriad ways how companies at different positions along the apparel commodity chain are responding to the new institutional and regulatory environment that NAFTA creates. By making it easier for U.S. companies to take advantage of Mexico as a nearby low-cost site for export-oriented apparel production, NAFTA is deepening the regional division of labor within North America, and this process has consequences for firms and workers in each of the signatory countries. In the introduction to this book we alluded to the obvious implications of shifting investment and trade patterns in the North American apparel industry for employment in the different countries. In this concluding chapter we focus on Mexico in the NAFTA era, specifically the extent to which Mexico's role in the North American economy facilitates or inhibits its economic development. W e begin with a discussion of the contemporary debate about Mexico's development, which turns on the question of how to assess the implications of Mexico's rapid and pro-found process of economic reform. Second, we focus on the textile and apparel industries as sectors that have been significantly affected by changes in regulatory environments at both the global and regional levels. Third, we examine the evidence regarding Mexico's NAFTA-era export dynamism, and in particular we emphasize the importance of interfirm networks, both for making sense of Mexico's meteoric rise among apparel exporters and for evaluating the implications of this dynamism for development. Fourth, we turn to a consideration of the national political-economic environment that shapes developmental outcomes for all Mexicans. Although regional disparities within Mexico are profound, aspects of government policy, such as management of the national currency, and characteristics of the institutional environment, such as industrial relations, have nationwide effects, and critics of NAFTA charge that these factors are contributing to a process of economic and social polarization that is ever more evident (Morales 1999; Dussel Peters 2000). Finally, we suggest that the mixed consequences of Mexico's NAFTA-era growth can be taken as emblematic of the contradictions that the process of globalization poses for economic and social development. The anti-sweatshop campaign in North America is one example of transnational or crossborder movements that are emerging to address the negative consequences of this process. In bringing attention to the problem of sweatshop production in North America, activists are developing strategies that rely on a network logic that is not dissimilar to the approaches reflected in the various chapters of this book. © 2009 by Temple University Press. All rights reserved.

An intelligent assistant for design and material engineers in the submarine cable industry

This paper describes an industrial application of case-based reasoning in engineering. The application involves an integration of case-based reasoning (CBR) retrieval techniques with a relational database. The database is specially designed as a repository of experiential knowledge and with the CBR application in mind such as to include qualitative search indices. The application is for an intelligent assistant for design and material engineers in the submarine cable industry. The system consists of three components; a material classifier and a database of experiential knowledge and a CBR system is used to retrieve similar past cases based on component descriptions. Work has shown that an uncommon retrieval technique, hierarchical searching, well represents several search indices and that this techniques aids the implementation of advanced techniques such as context sensitive weights. The system is currently undergoing user testing at the Alcatel Submarine Cables site in Greenwich. Plans are for wider testing and deployment over several sites internationally.

The world nuclear industry status report 2009: with particular emphasis on economic issues

A detailed review of the status of the world nuclear industry with particular emphasis on economic aspects.

2009 world nuclear industry status report

Although some countries plan to build new nuclear power plants in the near future, in aggregate the data indicates that nuclear power's influence will continue to dwindle across the globe in coming decades.