Processamento da amostra das silagens de grãos úmidos de sorgo com baixo e alto tanino na determinação da digestibilidade aparente em equinos

There were used four castrated male horses, crossbred. It was used randomized block by design for four replications. The objective was to evaluate the effect of using samples, ground or in natura, in the precision of the mobile nylon bag technique (MNBT) in comparison to the total collection (CT) method in oder to estimate the apparent digestibility coefficient (DC) of nutrients of high-moisture grains silage of sorghum with low (SSLT) and high (SSHT) tannin in the feeding equine. No effect was observed for MNBT and CT methods with in natura sample for DC of DM, OM, CE, CP to SSLT (P>0.05), whose average values were 81.71, 84.23, 82.27 e 81.43%, respectively. The MNBT did not showacuracy to evaluate of DC of the SSHT, with ground and in natura samples. It was concluded that MNBT containing in natura sample should be used to determinating the DC of SSLT to DM, OM, CE and CP for equines.

Determinação do teor de glicose em bagaço de cana-de-açúcar hidrolizado pelo processo de conversão enzimática

The production of ethanol and sugar from sugarcane juice generate as byproduct, the bagasse. Currently, the bagasse, an industrial lignocellulosic biomass, can be used for production of second-generation ethanol, since when it is submitted to hydrolytic processes generates fermentable sugars. The objective of this study was to produce fungal enzymes capable of hydrolyzing this lignocellulosic biomass to generate glucose. For this, we used the mushroom species Lentinula edodes, Pleurotus ostreatus, Pleurotus eryngii, and Pycnoporus sanguineus as potential sources of laccase, manganese peroxidase and lignin peroxidase enzymes, capable of hydrolyzing the crushed sugarcane. The hydrolysis process was performed with the highest enzymatic activities observed from laccase in L. edodes (39.23 U-mL after 25 day incubation), P. ostreatus (2.5 U U-mL after 27 day incubation), P. sanguineus (80 U-mL after 27 days of incubation) and P. eryngii (16.45 U-mL 15 days incubation). MnP and LiP showed no significant results. The enzymatic hydrolysis of sugarcane bagasse in natura (32,17% hemicellulose, cellulose 52,45% and 10,62% lignin) and bagasse hydrolyzate with 7,0% H2SO4 (0,20% hemicellulose, 68,82% to 25,33% cellulose and lignin) were evaluated for each enzymatic obtained. Compared to others, the enzymes produced by P. sanguineus incubated in sugarcane bagasse showed better efficiency resulting in glucose with an average content of 0,14 g-L. Although the levels of glucose determined in this work were low in relation to the literature, it can be stated that the laccase, manganese peroxidase and lignin peroxidase enzymes demonstrated good hydrolytic potential, especially those produced by the fungus P. sanguineus.

Aplicação de análise multicriterial para determinação de áreas prioritárias à recomposição florestal

Using the Geographic Information System (GIS) and taking into account its capability to analyze spatial data, a database of updated spatial data from the sub-basin of the Descalvado stream, Botucatu, SP, was developed to provide an evaluation and diagnosis of the area concerning land use and the degradation processes therein. Through GIS, priority areas for forest recovery were defined by Multicriteria Evaluation and using the Ordered Weighted Average method. The latter allows the decision maker to define the area to be recovered, facing limitation of resources, among one of the proposed scenarios, or do it in stages. The study showed that there are accelerated erosion processes in the headwaters of the springs of water bodies; there is also fragmentation of native vegetation, especially in hillside areas, and little presence of native vegetation in riparian areas. The application of the multicriteria analysis using the Ordered Weighted Average was important as it systematized and discriminated scenarios of priority for forest recovery.

Modelo hidrológico SWAT na determinação das perdas de solo na bacia hidrológica do Rio Pardo - Botucatu/SP

The objective of this work was to evaluate the sediment production in the initial part of the Pardo River Basin - Botucatu/SP from 1994 to 1999, using the mathematical hydrological model SWAT. It was used topographic maps and satellite data manipulated in GIS using the software SPRING 5.1.6. The simulation of sediment production was generated with the aid of an interface between the hydrological model SWAT 2009 with ArcView ®, version 9.3. The maps of Soil, Land Use and Digital Elevation Model (DEM) were generated in the GIS-SPRING 5.1.6 and exported to ArcSWAT 2009. The tabular data related to the parameters of soil and meteorological parameters were entered directly to the SWAT. The model allowed to estimate the sediment production. A sediment average production rate of 33.866 ton ha-1 over the six years of study was computed in the point of discharge of the basin.

Determinação da fase lactente-ruminante de cordeiros pela técnica do delta 13C

This study was conducted at University of Marília, São Paulo State, Brazil, aiming to determine the phase of intake transition between exclusively liquid diet (milk) and diet based on milk, grass and/or ration by lambs by δ13C technique. Six Suffolk crossbreeding lambs were distributed in a totally random design (3x2), with two experimental groups and three replications. At the first one, lambs were penned and sucked milk from dams fed with C4 diet. besides, they had access to C3 ration in creep feeding, since their birth. At the second group, lambs were kept on a paddock with Tifton – 85 grass (C4 photosynthetic way) as well as their dams and had access to C3 ration in creep feeding, since their birth. The C3 ration contained soybean meal, ground oat grains, lucerne hay and also mineral salt. The penned lambs’ ration consumption overcame the milk intake at 30-35 days after birth; however, grazing lambs ingested more milk and pasture than ration until 40 days after birth. The δ 13C technique was considered effective on studies of lambs feeding behavior.

Estudo peptídico e determinação do perfil de metabólitos de venenos de escorpiões da família buthidae: Tityus serrulatus, Tityus bahiensis e Tityus obscurus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação de vanádio em águas usando a técnica de difusão em filmes finos por gradientes de concentração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação de açucares em bagaço de palha de cana-de-açúcar por cromatografia líquida de alta eficiência com detecção eletroquímica utilizando eletrodos de nanotubos modificados com óxidos metálicos

Pós-graduação em Química - IQ

Desenvolvimento e validação de método bioanalítico para quantificação de tiazolilhidrazona-9 (TZH-9) e determinação da estabilidade em plasma ex vivo

A doença de Chagas é uma doença parasitária causada pelo protozoário Trypanosoma cruzi (T. cruzi), que acomete o sistema digestivo e, principalmente, o cardíaco. É uma doença endêmica principalmente nos países da América Latina. A busca por novos fármacos para o tratamento dessa doença é de suma importância já que os existentes podem causar severos efeitos adversos e são efetivos somente na fase aguda. A molécula tiazolilhidrazona-9 (TZH-9) tem se destacado como uma excelente candidata a fármaco para tratamento da doença de Chagas e a continuidade de seu desenvolvimento deve envolver estudos de farmacocinética e metabolismo. Para a realização destes estudos é necessário o desenvolvimento e validação de um método bioanalítico para a determinação do composto em plasma, assim como avaliar a estabilidade do fármaco nesta matriz biológica com o intuito de verificar a ação de enzimas plasmáticas. Neste trabalho, foi desenvolvido e validado o método bioanalítico para quantificar o TZH-9 em plasma de ratos e humano que apresentou limites de confiança adequados. Também, avaliou-se a estabilidade do TZH-9 nessas matrizes biológicas, em plasma de ratos, o composto apresentou instabilidade após 2 horas na concentração inferior, sugerindo ação de enzimas plasmáticas no seu metabolismo; e em plasma de humanos, apresentou instabilidade após 15 minutos em ambas concentrações, sugerindo a susceptibilidade a ação das enzimas plasmáticas

Estudo para determinação de uma metodologia para o ensaio de arrancamento que avalia aderência aço/concreto

This work talks about the importance of the steel adhesion to concrete, reinforced concrete structures, their testing and forms of measurement used and how the results are used in the structural design, which uses as a reference the NBR 6118 and NBR 7480. It also deals with the importance of a reliable assessment, discussing failures that the test used, NBR 7477, features in specific circumstances, as discussed under the EC-094. It also presents an initial proposal for simplified pullout test, which aims to analyze the grip on steel bars with diameter less than 10 mm, which results when used standardized testing by ABNT NBT 7477, has shown excessive variability, the main criticism of the trial today used without distinction to be established thick or thin bars. The proposal also presented methodology is in the consolidation phase, given the time and the volume of necessary tests. For this reason it is not possible to make a comparison between the values obtained and the results of the test used on the basis of the standard in force, this can only be done once the front with a continuation of this work

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

Determinação das condições ótimas de fermentação para produção de enzimas celulolíticas pelo fungo Aspergillus niger derivado-marinho, utilizando diferentes subprodutos agroindustriais

Pós-graduação em Biotecnologia - IQ

Desenvolvimento e validação de método bioanalítico para quantificação de tiazolilhidrazona-9 (TZH-9) e determinação da estabilidade em plasma ex vivo

A doença de Chagas é uma doença parasitária causada pelo protozoário Trypanosoma cruzi (T. cruzi), que acomete o sistema digestivo e, principalmente, o cardíaco. É uma doença endêmica principalmente nos países da América Latina. A busca por novos fármacos para o tratamento dessa doença é de suma importância já que os existentes podem causar severos efeitos adversos e são efetivos somente na fase aguda. A molécula tiazolilhidrazona-9 (TZH-9) tem se destacado como uma excelente candidata a fármaco para tratamento da doença de Chagas e a continuidade de seu desenvolvimento deve envolver estudos de farmacocinética e metabolismo. Para a realização destes estudos é necessário o desenvolvimento e validação de um método bioanalítico para a determinação do composto em plasma, assim como avaliar a estabilidade do fármaco nesta matriz biológica com o intuito de verificar a ação de enzimas plasmáticas. Neste trabalho, foi desenvolvido e validado o método bioanalítico para quantificar o TZH-9 em plasma de ratos e humano que apresentou limites de confiança adequados. Também, avaliou-se a estabilidade do TZH-9 nessas matrizes biológicas, em plasma de ratos, o composto apresentou instabilidade após 2 horas na concentração inferior, sugerindo ação de enzimas plasmáticas no seu metabolismo; e em plasma de humanos, apresentou instabilidade após 15 minutos em ambas concentrações, sugerindo a susceptibilidade a ação das enzimas plasmáticas

Estudo para determinação de uma metodologia para o ensaio de arrancamento que avalia aderência aço/concreto

This work talks about the importance of the steel adhesion to concrete, reinforced concrete structures, their testing and forms of measurement used and how the results are used in the structural design, which uses as a reference the NBR 6118 and NBR 7480. It also deals with the importance of a reliable assessment, discussing failures that the test used, NBR 7477, features in specific circumstances, as discussed under the EC-094. It also presents an initial proposal for simplified pullout test, which aims to analyze the grip on steel bars with diameter less than 10 mm, which results when used standardized testing by ABNT NBT 7477, has shown excessive variability, the main criticism of the trial today used without distinction to be established thick or thin bars. The proposal also presented methodology is in the consolidation phase, given the time and the volume of necessary tests. For this reason it is not possible to make a comparison between the values obtained and the results of the test used on the basis of the standard in force, this can only be done once the front with a continuation of this work

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found