How does the size and shape of local populations in China compare to general anthropometric surveys currently used for product design?

Anthropometry has long been used for a range of ergonomic applications & product design. Although products are often designed for specific cohorts, anthropometric data are typically sourced from large scale surveys representative of the general population. Additionally, few data are available for emerging markets like China and India. This study measured 80 Chinese males that were representative of a specific cohort targeted for the design of a new product. Thirteen anthropometric measurements were recorded and compared to two large databases that represented a general population, a Chinese database and a Western database. Substantial differences were identified between the Chinese males measured in this study and both databases. The subjects were substantially taller, heavier and broader than subjects in the older Chinese database. However, they were still substantially smaller, lighter and thinner than Western males. Data from current Western anthropometric surveys are unlikely to accurately represent the target population for product designers and manufacturers in emerging markets like China.

Design for Manufacturing (DFM) – A case study of repetitive measures

Design for Manufacturing (DFM) is a highly integral methodology in product development, starting from the concept development phase, with the aim of improving manufacturing productivity and maintaining product quality. While Design for Assembly (DFA) is focusing on elimination or combination of parts with other components (Boothroyd, Dewhurst and Knight, 2002), which in most cases relates to performing a function and manufacture operation in a simpler way, DFM is following a more holistic approach. During DFM, the considerable background work required for the conceptual phase is compensated for by a shortening of later development phases. Current DFM projects normally apply an iterative step-by-step approach and eventually transfer to the developer team. Although DFM has been a well established methodology for about 30 years, a Fraunhofer IAO study from 2009 found that DFM was still one of the key challenges of the German Manufacturing Industry. A new, knowledge based approach to DFM, eliminating steps of DFM, was introduced in Paul and Al-Dirini (2009). The concept focuses on a concurrent engineering process between the manufacturing engineering and product development systems, while current product realization cycles depend on a rigorous back-and-forth examine-and-correct approach so as to ensure compatibility of any proposed design to the DFM rules and guidelines adopted by the company. The key to achieving reductions is to incorporate DFM considerations into the early stages of the design process. A case study for DFM application in an automotive powertrain engineering environment is presented. It is argued that a DFM database needs to be interfaced to the CAD/CAM software, which will restrict designers to the DFM criteria. Consequently, a notable reduction of development cycles can be achieved. The case study is following the hypothesis that current DFM methods do not improve product design in a manner claimed by the DFM method. The critical case was to identify DFA/DFM recommendations or program actions with repeated appearance in different sources. Repetitive DFM measures are identified, analyzed and it is shown how a modified DFM process can mitigate a non-fully integrated DFM approach.

Advanced musculoskeletal simulation as an ergonomic design method

In recent years, the advent of new tools for musculoskeletal simulation has increased the potential for significantly improving the ergonomic design process and ergonomic assessment of design. In this paper we investigate the use of one such tool, ‘The AnyBody Modeling System’, applied to solve a one-parameter and yet, complex ergonomic design problem. The aim of this paper is to investigate the potential of computer-aided musculoskeletal modelling in the ergonomic design process, in the same way as CAE technology has been applied to engineering design.

A requirements and capability discussion : UAS for SAR and law enforcement

This presentation explores the requirements and capabilities of Unmanned Aircraft Systems (UAS) for applications in Law Enforcement and Search and Rescue.

Should we still lecture? Reconsidering pedagogical approaches to promote student engagement, challenging the traditional lecture

The dynamic interplay between existing learning frameworks: people, pedagogy, learning spaces and technology is challenging the traditional lecture. A paradigm is emerging from the correlation of change amongst these elements, offering new possibilities for improving the quality of the learning experience. For many universities, the design of physical learning spaces has been the focal point for blending technology and flexible learning spaces to promote learning and teaching. As the pace of technological change intensifies, affording new opportunities for engaging learners, pedagogical practice in higher education is not comparatively evolving. The resulting disparity is an opportunity for the reconsideration of pedagogical practice for increased student engagement in physical learning spaces as an opportunity for active learning. This interplay between students, staff and technology is challenging the value for students in attending physical learning spaces such as the traditional lecture. Why should students attend for classes devoted to content delivery when streaming and web technologies afford more flexible learning opportunities? Should we still lecture? Reconsideration of pedagogy is driving learning design at Queensland University of Technology, seeking new approaches affording increased student engagement via active learning experiences within large lectures. This paper provides an overview and an evaluation of one of these initiatives, Open Web Lecture (OWL), an experimental web based student response application developed by Queensland University of Technology. OWL seamlessly integrates a virtual learning environment within physical learning spaces, fostering active learning opportunities. This paper will evaluate the pilot of this initiative through consideration of effectiveness in increasing student engagement through the affordance of web enabled active learning opportunities in physical learning spaces.

Should we still lecture? Reconsidering pedagogical approaches to promote student engagement, challenging the traditional lecture

The dynamic interplay between existing learning frameworks: people, pedagogy, learning spaces and technology is challenging the traditional lecture. A paradigm is emerging from the correlation of change amongst these elements, offering new possibilities for improving the quality of the learning experience. For many universities, the design of physical learning spaces has been the focal point for blending technology and flexible learning spaces to promote learning and teaching. As the pace of technological change intensifies, affording new opportunities for engaging learners, pedagogical practice in higher education is not comparatively evolving. The resulting disparity is an opportunity for the reconsideration of pedagogical practice for increased student engagement in physical learning spaces as an opportunity for active learning. This interplay between students, staff and technology is challenging the value for students in attending physical learning spaces such as the traditional lecture. Why should students attend for classes devoted to content delivery when streaming and web technologies afford more flexible learning opportunities? Should we still lecture? Reconsideration of pedagogy is driving learning design at Queensland University of Technology, seeking new approaches affording increased student engagement via active learning experiences within large lectures. This paper provides an overview and an evaluation of one of these initiatives, Open Web Lecture (OWL), an experimental web based student response application developed by Queensland University of Technology. OWL seamlessly integrates a virtual learning environment within physical learning spaces, fostering active learning opportunities. This paper will evaluate the pilot of this initiative through consideration of effectiveness in increasing student engagement through the affordance of web enabled active learning opportunities in physical learning spaces.

Positive energy homes : impacts on, and implications for, ecologically sustainable design

A zero-energy home (ZEH) is a residential dwelling that generates as much energy annually from onsite renewable sources, as it consumes in its operation. A positive energy home (PEH) generates more energy than it consumes. The key design and construction elements, and costs and benefits of such buildings, are the subject of increasing research globally. Approaching this topic from the perspective of the role of such homes in the planning and development ‘supply chain’, this paper presents the measured outcomes of a PEH and discusses urban design implications. Using twelve months of detailed performance data of an occupied sub-tropical home, the paper analyses the design approach and performance outcomes that enable it to be classified as ‘positive energy’. Second, it analyses both the urban design strategies that assisted the house in achieving its positive energy status, and the impacts of such housing on urban design and infrastructure. Third, the triple bottom line implications are discussed from the viewpoint of both the individual household and the broader community. The paper concludes with recommendations for research areas required to further underpin and quantify the role of ZEHs and PEHs in enabling and supporting the economic, social and ecological sustainability of urban developments.

Simulation of ankle joint forces to optimize total ankle replacement design

When compared with other arthoplasties, Total Ankle Joint Replacement (TAR) is much less successful. Attempts to remedy this situation by modifying the implant design, for example by making its form more akin to the original ankle anatomy, have largely met with failure. One of the major obstacles is a gap in current knowledge relating to ankle joint force. Specifically this is the lack of reliable data quantifying forces and moments acting on the ankle, in both the healthy and diseased joints. The limited data that does exist is thought to be inaccurate [1] and is based upon simplistic two dimensional discrete and outdated techniques.

The incorporation of web 2.0 into learning design : an implementation model from the perspectives of teachers and students

This paper summarises some of the recent studies on various types of learning approaches that have utilised some form of Web 2.0 services in curriculum design to enhance learning. A generic implementation model of this integration will then be presented to illustrate the overall learning implementation process. Recently, the integration of Web 2.0 technologies into learning curriculum has begun to get a wide acceptance among teaching instructors across various higher learning institutions. This is evidenced by numerous studies which indicate the implementation of a range of Web 2.0 technologies into their learning design to improve learning delivery. Moreover, recent studies also have shown that the ability of current students to embrace Web 2.0 technologies is better than students using existing learning technology. Despite various attempts made by teachers in relation to the integration, researchers have noted a lack of integration standard to help in curriculum design. The absence of this standard will restrict the capacity of Web 2.0 adaptation into learning and adding more the complexity to provide meaningful learning. Therefore, this paper will attempt to draw a conceptual integration model which is being generated to reflect how learning activities with some facilitation of Web 2.0 is currently being implemented. The design of this model is based on shared experiences by many scholars as well as feedback gathered from two separate surveys conducted on teachers and a group of 180 students. Furthermore, this paper also recognizes some key components that generally engage in the design of a Web 2.0 teaching and learning which need to be addressed accordingly. Overall, the content of this paper will be organised as follows. The first part of the paper will introduce the importance of Web 2.0 implementation in teaching and learning from the perspective of higher education institutions and those challenges surrounding this area. The second part summarizes related works done in this field and brings forward the concept of designing learning with the incorporation of Web 2.0 technology. The next part presents the results of analysis derived from the two student and teachers surveys on using Web 2.0 during learning activities. This paper concludes by presenting a model that reflects several key entities that may be involved during the learning design.

Design for manufacturing : a review and case study

Design for Manufacturing (DFM) is a highly integral methodology in product development, starting from the concept development phase, with the aim of improving manufacturing productivity. It is used to reduce manufacturing costs in complex production environments, while maintaining product quality. While Design for Assembly (DFA) is focusing on elimination or combination of parts with other components, which in most cases relates to performing a function and manufacture operation in a simpler way, DFM is following a more holistic approach. Common consideration for DFM are standard components, manufacturing tool inventory and capability, materials compatibility with production process, part handling, logistics, tool wear and process optimization, quality control complexity or Poka-Yoke design. During DFM, the considerable background work required for the conceptual phase is compensated for by a shortening of later development phases. Current DFM projects normally apply an iterative step-by-step approach and eventually transfer to the developer team. The study is introducing a new, knowledge based approach to DFM, eliminating steps of DFM, and showing implications on the work process. Furthermore, a concurrent engineering process via transparent interface between the manufacturing engineering and product development systems is brought forward.

Digital human modelling for vehicle design and manufacturing

Digital human modelling (DHM) has today matured from research into industrial application. In the automotive domain, DHM has become a commonly used tool in virtual prototyping and human-centred product design. While this generation of DHM supports the ergonomic evaluation of new vehicle design during early design stages of the product, by modelling anthropometry, posture, motion or predicting discomfort, the future of DHM will be dominated by CAE methods, realistic 3D design, and musculoskeletal and soft tissue modelling down to the micro-scale of molecular activity within single muscle fibres. As a driving force for DHM development, the automotive industry has traditionally used human models in the manufacturing sector (production ergonomics, e.g. assembly) and the engineering sector (product ergonomics, e.g. safety, packaging). In product ergonomics applications, DHM share many common characteristics, creating a unique subset of DHM. These models are optimised for a seated posture, interface to a vehicle seat through standardised methods and provide linkages to vehicle controls. As a tool, they need to interface with other analytic instruments and integrate into complex CAD/CAE environments. Important aspects of current DHM research are functional analysis, model integration and task simulation. Digital (virtual, analytic) prototypes or digital mock-ups (DMU) provide expanded support for testing and verification and consider task-dependent performance and motion. Beyond rigid body mechanics, soft tissue modelling is evolving to become standard in future DHM. When addressing advanced issues beyond the physical domain, for example anthropometry and biomechanics, modelling of human behaviours and skills is also integrated into DHM. Latest developments include a more comprehensive approach through implementing perceptual, cognitive and performance models, representing human behaviour on a non-physiologic level. Through integration of algorithms from the artificial intelligence domain, a vision of the virtual human is emerging.

Impact of the Corporate Law Economic Reform Program Act 1999 on initial public offering prospectus earnings forecasts

Commencing 13 March 2000, the Corporate Law Economic Reform Program Act 1999 (Cth) introduced changes to the regulation of corporate fundraising in Australia. In particular, it effected a reduction in the litigation risk associated with initial public offering prospectus disclosure.We find that the change is associated with a reduction in forecast frequency and an increase in forecast value relevance, but not with forecast error or bias. These results confirm previous findings that changes in litigation risk affect the level but not the quality of disclosure. They also suggest that the reforms’ objectives of reducing fundraising costs while improving investor protection, have been achieved.

School policy responses to cyberbullying : an Australian legal perspective

The use of electronic means of contact to support repeated aggressive behaviour by an individual or group, that is intended to harm others – or ‘cyberbullying’ as it is now known – is increasingly becoming a problem for modern students, teachers, parents and schools. Increasingly victims of face to face bullying are looking to the law as a means of recourse, not only against bullies but also school authorities who have the legal responsibility to provide a safe environment for learning. It is likely that victims of cyberbullying will be inclined to do the same. This article examines a survey of the anti-bullying policies of a small sample of Australian schools to gauge their readiness to respond to the challenge of cyberbullying, particularly in the context of the potential liability they may face. It then uses that examination as a basis for identifying implications for the future design of school anti-bullying policies.

Air Conditioning Systems : Design and Energy efficiency

Air conditioning systems have become an integral part of many modern buildings. Proper design and operation of air conditioning systems have significant impact not only on the energy use and greenhouse gas emissions from the buildings, but also on the thermal comfort and productivity of the occupants. In this paper, the purpose and need of installing air conditioning systems is first introduced. The methods used for the classification of air conditioning systems are then presented. This is followed by a discussion on the pros and cons of each type of the air conditioning systems, including both common and new air conditioning technologies. The procedures used to design air conditioning systems are also outlined, and the implications of air conditioning systems, including design, selection, operation and maintenance, on building energy efficiency is also discussed.