Descrição do ciclo gametogênico do ouriço-branco, Tripneustes ventricosus (Lamarck, 1816), no Arquipélago de Fernando de Noronha PE, Brasil

Sea urchins are common benthic organisms on coastal ecosystems of tropical and temperate shallow waters. The impact of sea urchins populations in shore communities is density-dependent, and therefore, knowledge of the life history of these animals is important to understand these interactions. Between 2000 and 2005 a population boom of Tripneustes ventricosus was observed in the Fernando de Noronha Archipelago. In 2004 a research program was started to monitor the population dynamics of T. ventricosus in the archipelago, when it noted a lack of basic information on the biology and reproduction of this species, despite its broad geographic distribution and economic importance in parts of its occurrence. In this context, this work focuses on the reproductive biology of T. ventricosus with emphasis on the description of the gametogenic stages. Between December 2006 and July 2007, ten urchins were collected by snorkeling in two sites of the archipelago, totaling 120 individuals. Gametogenic stages were described for both sexes through microscopic analysis, and were defined as: Recovery, Growing, Premature, Mature and Spawning. Results showed increasing in Gonad index throughout of months of sampling and suggest that the reproductive cycle of the species in the archipelago is annual

Efeito da densidade de sementeira nos componentes de rendimento do tremoço branco (Lupinus albus L.)

O tremoço branco (Lupinus albus L.) é utilizado na alimentação animal e humana. Com este trabalho pretendeu-se avaliar o efeito de duas densidades de sementeira (20 e 40 sementes/m2, respectivamente) na produtividade e nos componentes do rendimento de um ecótipo de tremoço branco. O campo experimental foi instalado na Quinta do Galinheiro (ESAS) Santarém, de acordo com um delineamento experimental em parcelas totalmente aleatórias, com 4 repetições. Foram efetuadas observações bissemanais do desenvolvimento e crescimento através da amostragem aleatória de 8 plantas em cada um dos tratamentos (número de folhas, ramificações e vagens por planta; número médio de grãos por vagem e por planta; peso seco de cada componente e o total da planta; peso de 1000 grãos e teor de proteína do grão). Observaram-se perdas importantes de plantas entre a sementeira e a emergência. O maior crescimento e produtividade individual das plantas na menor densidade, relativamente à maior, justificaram os valores muito aproximados verificados entre os dois tratamentos quando são consideradas as variáveis por unidade de área. Os teores de proteína e calibre do grão foram também idênticos nos dois tratamentos. Confirma-se assim a elevada capacidade da planta em se adaptar a diferentes densidades.

Projeto raia de fogo: aspectos populacionais da raia de fogo (Dasyatis marianae Gomes, Rosa & Gadig, 2000) e pesca de elasmobrânquios no complexo recifal do Parracho de Maracajaú

The species Dasyatis marianae inhabits coastal areas associated with coral reefs, considered endemic to the northeast of Brazil, occurring from the State of Maranhão to the south of Bahia. Specimens of this species are commonly sighted by divers and fishermen in the area of Maracajaú reefs, a complex reef that is part of the Environmental Protection Area of Coral Reefs (EPACR), which was developed in this study about the ecology and biology of the D. marianae, in order to characterize aspects of population structure in the area of the reef complex of Parracho de Maracajaú. We analyzed 120 specimens caught by artisanal fishing site of the size, weight, sex, stage of maturity and stomach contents. Most subjects were adult males (1.7:1) and was more abundant for rays with lengths between 25 and 29cm of LD, where females reach larger sizes, a feature common to other rays. The largest specimens were captured in the area of seagrass, which is preferred for the species. The distribution of species in the area showed an ontogenetic and sexual segregation, where the youthful occur near the beach, which is a likely area for nursery and growth of the adult females prevail in the seagrass, which apparently has a high prey availability, and Adult males are more distant, a higher proportion occurring in outlying areas, suggesting a habit more exploratory than the females. The evaluation of the reproductive system indicated 3 reproductive cycles per year, one young per pregnancy, and showed that the mature males were smaller than females. The cubs of D. marianae size at birth 12 to 15cm LD. As for diet, the species was characterized as carnivorous crustacean specialist. The performance of visual censuses in different localities allowed to evaluate the density of D. marianae in different environments of the complex. The species occurs in greater numbers in seagrass, environment very important for the conservation of the species. 100 individuals of D. marianae marked in reef complex area enrolled in a recapture rate of 3%. Some behavioral aspects were evaluated, as diurnal pattern of activity, interaction with cleaning and fish Pomacanthus paru followers as Lutjanus analis and Carangoides bartholomaei. Overall, much of the information obtained should be used for management of the species

PRODUTOS FLORESTAIS NÃO MADEIREIROS E VALOR POTENCIAL DE EXPLORAÇÃO SUSTENTÁVEL DA FLORESTA ATLÂNTICA NO SUL DE SANTA CATARINA

Este estudo indicou os produtos florestais não madeireiros (PFNM) associados a espécies arbóreas dos remanescentes de Floresta Ombrófila Densa estudados no Sul de Santa Catarina. As espécies analisadas foram hierarquizadas com base na análise de valor potencial de exploração sustentável (VPES) dos PFNM, integrando-se às seguintes informações obtidas a partir de revisão bibliográfica: densidade, parte usada, capacidade de regeneração natural e crescimento, conhecimento sobre biologia reprodutiva e dinâmica populacional, processamento requerido e nível de injúria ou toxicidade. Os resultados obtidos evidenciam ser possível a conservação e desenvolvimento regional, a partir de alternativas sustentáveis de uso dos recursos florestais. Das 79 espécies observadas, 38 atingiram VPES igual ou superior a 10, sendo consideradas de elevado potencial de exploração sustentável de PFNM.

CARACTERÍSTICAS DENDROMÉTRICAS, QUÍMICAS E DENSIDADE BÁSICA DA MADEIRA DE HÍBRIDOS DE Eucalyptus grandis X Eucalyptus urophylla

O presente trabalho avaliou características dendrométricas, químicas e a densidade básica da madeira de cinco híbridos de Eucalyptus grandis x Eucalyptus urophylla , com 2,25 anos de idade. O experimento foi implantando no espaçamento 3,5 x 2 m, com 35 repetições e parcelas de uma planta. Quatro repetições do experimento foram cortadas avaliando-se o diâmetro a altura do peito (DAP, a 1,3 m do solo), altura total e comercial, biomassa seca de folhas, galhos, madeira e casca, volume com e sem casca e volume de casca. Das árvores abatidas foram retirados discos de 5 cm de espessura no DAP e a 0 (base), 25, 50, 75 e 100% da altura comercial, para determinação da densidade básica e caracterização química da madeira. Os dados foram submetidos à análise de variância e comparação de médias pelo teste de Tukey a 5% de probabilidade. Os clones de Eucalyptus grandis x Eucalyptus urophylla diferiram quanto ao volume e biomassa com destaque para o C5 com valores superiores aos demais clones. A densidade básica da madeira foi maior na base da árvore; nas demais posições de amostragem, os valores de densidade foram semelhantes entre si; dentre os clones, o C5 apresentou densidade básica da madeira superior ao C3 e ao C4, assim como o C2 superou o C3. As características químicas da madeira foram semelhantes entre os clones e, apesar da avaliação ter sido realizada em plantas jovens, os clones demonstraram bom potencial em Jaboticabal - SP.

Estrutura genética populacional de Lutjanus analis cioba e Lutjanus jocu dentão (Lutjanidae) ao longo do litoral brasileiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Adição de vermiculita expandida mícron em pastas de baixa densidade para cimentação de poços de petróleo

The northeastern region of Brazil has a large number of wells producing oil using a method of secondary recovery steam injection, since the oil produced in this region is essentially viscous. This recovery method puts the cement / coating on thermal cycling, due to the difference in coefficient of thermal expansion between cement and metal coating causes the appearance of cracks at this interface, allowing the passage of the annular fluid, which is associated with serious risk socioeconomic and environmental. In view of these cracks, a correction operation is required, resulting in more costs and temporary halt of production of the well. Alternatively, the oil industry has developed technology for adding new materials in cement pastes, oil well, providing high ductility and low density in order to withstand the thermo-mechanical loads generated by the injection of water vapor. In this context, vermiculite, a clay mineral found in abundance in Brazil has been applied in its expanded form in the construction industry for the manufacture of lightweight concrete with excellent insulation and noise due to its high melting point and the presence of air in their layers lamellar. Therefore, the vermiculite is used for the purpose of providing low-density cement paste and withstand high temperatures caused by steam injection. Thus, the present study compared the default folder containing cement and water with the folders with 6%, 8% and 10% vermiculite micron conducting tests of free water, rheology and compressive strength where it obtained the concentration of 8 % with the best results. Subsequently, the selected concentration, was compared with the results recommended by the API standard tests of filtered and stability. And finally, analyzed the results from tests of specific gravity and time of thickening. Before the study we were able to make a folder with a low density that can be used in cementing oil well in order to withstand the thermo-mechanical loads generated by steam injection

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Utilização de nanosílica como aditivo estendedor para pastas cimentantes de baixa densidade destinadas à cimentação de poços petrolíferos

Cementing operations are conducted at different times of the well s life and they have high importance, because the functions are fundamental to keep good properties during a long life of the well, such as, maintain the mechanical stability of the well, to promote the isolation hydraulic and support the tubing. In some situations, the rocky zones have low fractures pressures and require the use of lightweight slurries to prevent the hydrostatic pressure in the formation is greater than the pressure of fracture. There are three ways to reduce the density of cement slurries: exterders water additives, microspheres and foamed slurries. The most used extender water additive is sodium bentonite, which is a clay with a good capacity of water absorption and expansion of its volume, the main disadvantage of this additive is the reduction of the strength. Currently, the use of nanoscale particles has received special attention, mainly because they get new functionalities. Following this trend, this paper aims to use a colloidal solution of nano-silica as an exterders water additives for use in oil wells. Slurries were designed with fixed 13lb/gal density and concentration of nano silica 0.1 gpc; 0.4 gpc; 0.7 and 1gpc, the influence of nano-silica was studied at these levels in isolation and combined varying concentrations of CaCl2,. Tests including rheology, stability, strength, thickening time, porosity and permeability. Besides the API tests, microstructural characterizations were performed after 28 days of the slurries, X-ray diffraction (XRD) and scanning electron microscopy (SEM)

A forma do privilégio: renda, acessibilidade e densidade em Natal-RN

The aim of this work is to understand the morphological expression of ground occupation by the higher income population, by focusing on population distribution in accordance with income layers and demographical density, as well as topological accessibility (HILLIER and HANSON, 1984) resulting from the urban grid structure. It endeavors to identify a functional organizing principle regarding the intra-urban space of Natal capital city of the state of Rio Grande do Norte, the research focus. In order to achieve this, census data as well as syntactic data were utilized for mapping and spatial analysis of income patterns, topological accessibility and demographical density using Geographical Information System GIS. The organizing principle was named as the Form of Privilege, a pattern that concentrates or tends to concentrate wealth, topological accessibility and low demographical density. Attempting to assess its extent, beyond Natal, this principle was applied to other Brazilian northeastern capitals such as: Fortaleza, CE; Teresina, PI; Aracaju, SE; Recife, PE; and João Pessoa, PB. Findings point out that although the urban structures of these cities are not immune to the Form of Privilege, Natal is emblematic of this phenomenon, a fact that demonstrates the perverse character of its spatial process, which historically creates privileged areas within the city, by means of the appropriation of accessibility as well as of the many urban benesses that are related to it by higher income groups at the expense of the major part of the population, which though being the people mostly in need of the benefits originating from the urban form are excluded from them

Tamanho efetivo populacional e diversidade genética em progênies de Pinus caribaea var. hondurensis.

2015

Densidade e diversidade em açaizais nativos no projeto de desenvolvimento sustentável Virola-Jatobá, em Anapu/PA.

A polpa do açaí diluída em água proporciona bebida de alto valor energético e rica em vitaminas, muito apreciada pelas comunidades tradicionais na Amazônia. Nos últimos anos a bebida passou a ser consumida em vários estados brasileiros e no exterior, com grande procura e, consequentemente, considerável aumento no preço. Com o objetivo de avaliar a densidade e a diversidade vegetal em açaizais de grotas (baixio) foram instaladas duas parcelas de 40 m x 25 m, subdivididas em quatro sub-blocos de 20 m x 12,5 m, em área de agricultores no Projeto de Desenvolvimento Sustentável Virola-Jatobá, Anapu/PA, em 2014. Observou-se que quanto maior a área basal das parcelas, menor o número de estipes adultos. Como a produção de frutos depende do número de estipes adultos será importante controlar a área basal das espécies arbóreas em manejo de açaizal. Entretanto, a presença das dicotiledôneas arbóreas é importante, pela sua atuação na reciclagem dos nutrientes e no processo de polinização.

Estoque de carbono e densidade do solo em plantio de Eucalyptus grandis na Amazônia Oriental.

O objetivo desse trabalho foi avaliar o efeito da conversão de uma floresta sucessional em sistema de floresta plantada de eucalipto sobre a densidade aparente e o estoque de carbono (C) do solo. O estudo foi conduzido em um povoamento de Eucalyptus grandis com quatro anos de idade e em um fragmento de floresta sucessional, em Paragominas, Pará, Brasil. Amostras de solo foram coletadas em quatro parcelas em cada sistema, nas profundidades 0-5, 5-10, 10-20, 20-30 30-50, 50-70 e 70-100 cm. De maneira geral a densidade do solo variou entre 0,9 a 1,2 g cm-3; nas profundidades 5-10 e 10-20 cm, a densidade do solo no plantio de eucalipto foi inferior à floresta sucessional.