Possibilidade de aplicação de misturas de herbicidas de ação total com Jato dirigido em mamoneira de porte anão

Com o objetivo de avaliar os efeitos da aplicação em jato dirigido com e sem proteção do bico de pulverização através de chapéu-de-napoleão para misturas de herbicidas de ação total na cultura da mamoneira de porte anão, na safra 2004/2005, um experimento foi conduzido no município de Garça-SP, utilizando-se o híbrido Lyra e espaçamento de 1,0 x 0,5 m. O delineamento experimental utilizado foi o de blocos casualizados, com tratamentos em esquema fatorial 2 x 10, com quatro repetições, em que o primeiro fator representou a forma de aplicação de jato dirigido com e sem uso de chapéu-de-napoleão e o segundo os herbicidas: glyphosate (0,72 kg ha-1); glyphosate + 2,4-D (0,72 + 0,35 kg ha-1); glyphosate + flumioxazin (0,72 + 0,025 kg ha-1); glyphosate + carfentrazone-ethyl (0,72 + 0,016 kg ha-1); glyphosate + diuron (0,72 + 0,75 kg ha-1); MSMA + diuron (1,44+ 0,75 kg ha-1); paraquat + diuron (0,9 kg ha-1); paraquat + diquat (0,20 + 0,20 kg ha-1); paraquat + bentazon (0,40 + 0,48 kg ha-1); e testemunha capinada. A aplicação dos herbicidas foi feita em pós-emergência das plantas daninhas, nas entrelinhas da cultura, utilizando-se pulverizador costal pressurizado com CO2, com uma ponta XR 8002-VS para o uso de chapéu-de-napoleão e duas pontas XR 11002-VS, espaçadas de 50 cm, para condição sem proteção, ambas com consumo de calda equivalente a 200 L ha-1. O herbicida glyphosate e as misturas de paraquat + bentazon, glyphosate + 2,4-D e paraquat + diquat proporcionaram os maiores níveis de produtividade da mamoneira Lyra quando aplicados em jato dirigido e com auxílio de chapéu-de-napoleão. As misturas paraquat + bentazon (0,40 + 0,48 kg ha-1) e paraquat + diquat (0,20 + 0,20 kg ha-1) demonstraram ser as mais indicadas para aplicação em jato dirigido com proteção do bico de pulverização.

Influência do etil-trinexapac no acúmulo, na distribuição de nitrogênio (15N) e na massa de grãos de arroz de terras altas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Gas exchange rates, plant height, yield components, and productivity of upland rice as affected by plant regulators

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo comparativo das propriedades mecânicas em compósitos da fibra modal e poliester

In the present work, three composites with distinct reinforcements (polyester, modal e polyester + modal), all if a unsaturated orthophthalic polyester resin as matrix were used, in order to conduct a comparative study by mechanical tests and water absorption. The fibre mats were prepared in a mat preparatory by immersion developed in the Textile Engineering Laboratory. The composites were manufactured using a closed mould process by compression using an unsaturated orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as an initiator. In each composite twelve samples with the dimensions of 150x25x3 mm were cut randomly for the mechanical analysis (tension x extension, three points bending and water absorption and Scanning Electron Micsroscopy). The mechanical tests were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN . All the analyses were carried out according to the ASTM norms. The resultant samples from the mechanical analysis were subjected for the Scanning Electron Microscopy analysis. Based on the results obtained, it was observed that the reinforced composite with two fibres (modal + polyester) presented better results in comparison to the other two composites both in the tension/extension as well on the three point bending tests. In the water absorption test, it was possible to observe an equilibrium in the water absorption by the modal and polyester composite, due to the union of the two fibres. In the SEM images, the regions of rupture in the composites as well as the adsorption between the fiber and the matrix could be observed

Fabricação de eco-composito com a fibra de lã canina

The Sustainability has been evidence in the world today; organizations have sought to be more and more into this philosophy in their processes, whether products or attendance. In the present work were manufactured eco-composites with animal fiber (dog wool) that is currently discarded into the environment without any use. The fibers were characterized and made matting (non-woven). The phases of the project were consisted to develop methods and to convert these fibers (booster) blended with polyester resin (matrix) in different proportions (10%, 20% and 30%) at the composite. Were studied fiber characteristics, mechanical properties of the composites, water absorption and scanning electron microscopy. Initially, the fibers were treated with solution of sodium hydroxide of 0.05 mols, and then taken to matting preparing at the textile engineering laboratory - UFRN. The composites were made by compression molding, using an orthophthalic polyester resin as matrix and 1% MEK (methyl ethyl ketone peroxide) as initiator (catalyst). To evaluate the mechanical tests (tensile and flexural) and water absorption were made twelve specimens with dimensions 150x25x3 mm were cut randomly. According to the standard method, tensile tests (ASTM 3039) bending tests (ASTM D790) were performed at the mechanical testing of metals at laboratory UFRN. The results of these tests showed that the composite reinforced with 30% had a better behavior when exposed to tension charge; while on the three points bending test showed that the composite reinforced with 10% had a better behavior. In the water absorption test it was possible to see that the highest absorption happened on the composite reinforced with 30%. In the micrographs, it was possible to see the regions of rupture and behavior of the composite (booster / matrix)

Desenvolvimento e produtividade da cana-de-açúcar após aplicação de reguladores vegetais em meio de safra

The supply of technological quality raw material for providing economical return is the most important necessity of sugar and alcohol industry. The objective of this work was to evaluate the development and productivity of sugarcane stalks due to plant regulators application at half crop. The experiment was carried out in a randomized block design with five replications. The treatments consisted of four plant regulators of the class of the growth retainers (Ethephon, Ehyl-trinexapac, Potassium nitrate, Potassium nitrate + Boron) application and a control (natural ripening). Ethyl-trinexapac and Ethephon treatments were efficient to hold up growth process regarding height of plants, but had no effect on diameter of stalks. The maintenance of bud top integrity made possible the increase in diameter of stalks, without interrupting the growth process regarding height of plants. According to application time the ripeners provided improvement on technological quality of raw material. The ripeners did not affect the number of plants per meter at harvest and did not cause quantitative alterations in the mass of stalks per hectare. The ripeners did not affect the regrowth of the ratoon cane.

Extração, caracterização e aplicação do corante de urucum (Bixa orellana L.) no tingimento de fibras naturais

The increasing demand for natural dyes in place of synthetic ones is justified by the non-toxicity or low toxicity of the former. The synthetic dyes are associated with diseases like cancer as well as when released in the environment takes longer to degrade and the intermediates could be still more toxic. The Annatto (Bixa Orellana L.) is a carotenoid and one of the more important natural dyes used in the food industry. In the form of dye, it represents nearly 70% of the world natural dye production and 90% in Brazil. In the present work, annatto seeds were used of the species peruana paulista, which had nearly 2.1% of bixin. The process of dye extraction with ethyl alcohol showed 4% of dye in the form of powder with particle diameter of 28mm. The extraction process did not alter the chemical composition of the dye, which was confirmed by the electronic spectrum of absorption. Dyeings were carried out with different mordents to study the total colour difference as well as the wash fastness properties and friction fastness properties under wet and dry conditions. The samples treated with copper sulphate showed colour difference but at the same time showed better fastness results. The samples treated with resin (no formaldehyde) did not alter the colour significantly still better the fastness properties. From the results, it could be stated that the resin could be an alternative for heavy metallic mordents

Nutrientes na seiva de plantas cítricas fertirrigadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Volatile compounds from organic and conventional passion fruit (Passiflora edulis F. Flavicarpa) pulp

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contribution to the laboratory diagnosis of human cryptosporidiosis

A criptosporidiose humana é uma infecção causada pelo Cryptosporidium sp, um protozoário coccídio de patogenicidade emergente e responsável por severa e prostrante diarréia aquosa em humanos, principalmente em indivíduos imunodeprimidos. O diagnóstico, feito através da utilização de esfregaços de fezes submetidos a técnicas de concentração e coloração específica pela fucsina-carbólica tem oferecido bons resultados em nosso laboratório. Tendo em vista o longo tempo despendido para a observação dos esfregaços considerando-se a pequenez das formas e o contraste da coloração, realizamos modificações no procedimento técnico da coloração ácido-resistente que resultaram em sensível melhoria das preparações: a fucsina-carbólica passou a ser deixada sobre o esfregaço por período de 3 minutos (LENNETTE et al., 1985) e procedeu-se a substituição da solução de álcool-ácido sulfúrico a 5% (HENRIKSEN & POHLENZ, 1981) por solução de ácido clorídrico a 0,5% em álcool etílico 70%, por cerca de 2 minutos (contribuição original). Estas alterações promoveram melhor remoção do excesso de fucsina-carbólica, aumentando a eficiência da etapa de descoloração e consequentemente otimizando o contraste do processo de coloração. Nestas condições, as lâminas examinadas em microscópio óptico em aumentos de 250x e 1000x tiveram a visualização dos oocistos do protozoário facilitada, sendo os mesmos observados em contraste destacado com pigmentação intensa de cor rosa-avermelhada contra coloração de fundo azulada. Vale destacar que estas modificações oferecem vantagens de rápido processamento do material e facilidade de visualização do protozoário, diminuindo o tempo de microscopia, tornando a análise das lâminas mais rápida e menos cansativa, agilizando o diagnóstico.

Assessment of DNA damage induced by extracts, fractions and isolated compounds of Davilla nitida and Davilla elliptica (Dilleniaceae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Assessment of the In Vivo Genotoxicity of New Lead Compounds to Treat Sickle Cell Disease

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical Profile and Biological Potential of Non-Polar Fractions from Centroceras clavulatum (C. Agardh) Montagne (Ceramiales, Rhodophyta)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative Studies of the (Anti) Mutagenicity of Baccharis dracunculifolia and Artepillin C by the Bacterial Reverse Mutation Test

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mutagenicity of New Lead Compounds to Treat Sickle Cell Disease Symptoms in a Salmonella/Microsome Assay

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)