The theory of constraints in manufacturing

In this paper, a systematic and quantitative view is presented for the application of the theory of constraints in manufacturing. This is done employing the operational research technique of mathematical programming. The potential of the theory of constraints in automated manufacturing is demonstrated.

Chaos and Unpredictability in the Vibration of an Elasto-Plastic Beam

This contribution discusses the nonlinear dynamics of a pin-ended elasto-plastic beam with both kinematic and isotropic hardening. An iterative numerical procedure based on the operator split technique is developed in order to deal with the nonlinearities in the equations of motion. Free and forced responses for harmonic sinusoidal and square wave excitations are investigated. Numerical simulations present many interesting behaviors such as jump phenomena, sensitivity to initial conditions, chaos and transient chaos. These results indicate that there are practical problems in predicting the response of the beam even when periodic steady state response is expected.

Experimental Vibration Characteristics of a Beam with Nonlinear Support Using Receptance Coupling Analysis

This paper applies the Multi-Harmonic Nonlinear Receptance Coupling Approach (MUHANORCA) (Ferreira 1998) to evaluate the frequency response characteristics of a beam which is clamped at one end and supported at the other end by a nonlinear cubic stiffness joint. In order to apply the substructure coupling technique, the problem was characterised by coupling a clamped linear beam with a nonlinear cubic stiffness joint. The experimental results were obtained by a sinusoidal excitation with a special force control algorithm where the level of the fundamental force is kept constant and the level of the harmonics is kept zero for all the frequencies measured.

Application of the center manifold theory to the study of slewing flexible Non-ideal structures with nonlinear curvature: a case study

In this paper is Analyzed the local dynamical behavior of a slewing flexible structure considering nonlinear curvature. The dynamics of the original (nonlinear) governing equations of motion are reduced to the center manifold in the neighborhood of an equilibrium solution with the purpose of locally study the stability of the system. In this critical point, a Hopf bifurcation occurs. In this region, one can find values for the control parameter (structural damping coefficient) where the system is unstable and values where the system stability is assured (periodic motion). This local analysis of the system reduced to the center manifold assures the stable / unstable behavior of the original system around a known solution.

A Modified phosphate-carrier protein theory is proposed as a non-target site mechanism For glyphosate resistance in weeds

Glyphosate is an herbicide that inhibits the enzyme 5-enolpyruvyl-shikimate-3-phosphate synthase (EPSPs) (EC 2.5.1.19). EPSPs is the sixth enzyme of the shikimate pathway, by which plants synthesize the aromatic amino acids phenylalanine, tyrosine, and tryptophan and many compounds used in secondary metabolism pathways. About fifteen years ago it was hypothesized that it was unlikely weeds would evolve resistance to this herbicide because of the limited degree of glyphosate metabolism observed in plants, the low resistance level attained to EPSPs gene overexpression, and because of the lower fitness in plants with an altered EPSPs enzyme. However, today 20 weed species have been described with glyphosate resistant biotypes that are found in all five continents of the world and exploit several different resistant mechanisms. The survival and adaptation of these glyphosate resistant weeds are related toresistance mechanisms that occur in plants selected through the intense selection pressure from repeated and exclusive use of glyphosate as the only control measure. In this paper the physiological, biochemical, and genetic basis of glyphosate resistance mechanisms in weed species are reviewed and a novel and innovative theory that integrates all the mechanisms of non-target site glyphosate resistance in plants is presented.

Interpersonal understanding and theory of mind

En populär idé inom dagens filosofiska och psykologiska forskning om interpersonlig förståelse, är idén att vi använder en kognitiv funktion (eller metod) för att förstå andra människor, en så kallad ”theory of mind” funktion. Denna idé förekommer inom ett brett vetenskapligt fält så som inom evolutionspsykologi, inom teorier om barns utveckling, inom teorier om autism, samt inom emotionsfilosofi och moralfilosofi. Avsikten i denna studie är att se närmare på vissa inflytelserika filosofiska och psykologiska teorier om interpersonlig förståelse, teorier som också har en stark koppling till empirisk forskning. I arbetet hävdar Gustafsson att teorierna ifråga avspeglar vissa klassiska, filosofiskt problematiska, antaganden. Dessa antaganden präglar teorierna ifråga samt påverkar hur de empiriska undersökningarna byggs upp och hur resultat tolkas.

Conflicting genomes, the demic theory & biodiversity

Organismic-centered Darwinism, in order to use direct phenotypes to measure natural selection's effect, necessitates genome's harmony and uniform coherence plus large population sizes. However, modern gene-centered Darwinism has found new interpretations to data that speak of genomic incoherence and disharmony. As a result of these two conflicting positions a conceptual crisis in Biology has arisen. My position is that the presence of small, even pocket-size, demes is instrumental in generating divergence and phenotypic crisis. Moreover, the presence of parasitic genomes as in acanthocephalan worms, which even manipulate suicidal behavior in their hosts; segregation distorters that change meiosis and Mendelian ratios; selfish genes and selfish whole chromosomes, such as the case of B-chromosomes in grasshoppers; P-elements in Drosophila; driving Y-chromosomes that manipulate sex ratios making males more frequent, as in Hamilton's X-linked drive; male strategists and outlaw genes, are eloquent examples of the presence of real conflicting genomes and of a non-uniform phenotypic coherence and genome harmony. Thus, we are proposing that overall incoherence and disharmony generate disorder but also more biodiversity and creativeness. Finally, if genes can manipulate natural selection, they can multiply mutations or undesirable characteristics and even lethal or detrimental ones, hence the accumulation of genetic loads. Outlaw genes can change what is adaptively convenient even in the direction of the trait that is away from the optimum. The optimum can be "negotiated" among the variants, not only because pleiotropic effects demand it, but also, in some cases, because selfish, outlaw, P-elements or extended phenotypic manipulation require it. With organismic Darwinism the genome in the population and in the individual was thought to act harmoniously without conflicts, and genotypes were thought to march towards greater adaptability. Modern Darwinism has a gene-centered vision in which genes, as natural selection's objects can move in dissonance in the direction which benefits their multiplication. Thus, we have greater opportunities for genomes in permanent conflict.

Clinical signs of pneumonia in children: association with and prediction of diagnosis by fuzzy sets theory

The present study compares the performance of stochastic and fuzzy models for the analysis of the relationship between clinical signs and diagnosis. Data obtained for 153 children concerning diagnosis (pneumonia, other non-pneumonia diseases, absence of disease) and seven clinical signs were divided into two samples, one for analysis and other for validation. The former was used to derive relations by multi-discriminant analysis (MDA) and by fuzzy max-min compositions (fuzzy), and the latter was used to assess the predictions drawn from each type of relation. MDA and fuzzy were closely similar in terms of prediction, with correct allocation of 75.7 to 78.3% of patients in the validation sample, and displaying only a single instance of disagreement: a patient with low level of toxemia was mistaken as not diseased by MDA and correctly taken as somehow ill by fuzzy. Concerning relations, each method provided different information, each revealing different aspects of the relations between clinical signs and diagnoses. Both methods agreed on pointing X-ray, dyspnea, and auscultation as better related with pneumonia, but only fuzzy was able to detect relations of heart rate, body temperature, toxemia and respiratory rate with pneumonia. Moreover, only fuzzy was able to detect a relationship between heart rate and absence of disease, which allowed the detection of six malnourished children whose diagnoses as healthy are, indeed, disputable. The conclusion is that even though fuzzy sets theory might not improve prediction, it certainly does enhance clinical knowledge since it detects relationships not visible to stochastic models.

Selection of patients for myocardial perfusion scintigraphy based on fuzzy sets theory applied to clinical-epidemiological data and treadmill test results

Coronary artery disease (CAD) is a worldwide leading cause of death. The standard method for evaluating critical partial occlusions is coronary arteriography, a catheterization technique which is invasive, time consuming, and costly. There are noninvasive approaches for the early detection of CAD. The basis for the noninvasive diagnosis of CAD has been laid in a sequential analysis of the risk factors, and the results of the treadmill test and myocardial perfusion scintigraphy (MPS). Many investigators have demonstrated that the diagnostic applications of MPS are appropriate for patients who have an intermediate likelihood of disease. Although this information is useful, it is only partially utilized in clinical practice due to the difficulty to properly classify the patients. Since the seminal work of Lotfi Zadeh, fuzzy logic has been applied in numerous areas. In the present study, we proposed and tested a model to select patients for MPS based on fuzzy sets theory. A group of 1053 patients was used to develop the model and another group of 1045 patients was used to test it. Receiver operating characteristic curves were used to compare the performance of the fuzzy model against expert physician opinions, and showed that the performance of the fuzzy model was equal or superior to that of the physicians. Therefore, we conclude that the fuzzy model could be a useful tool to assist the general practitioner in the selection of patients for MPS.

A phonological and tonal analysis of Samue using Optimality Theory

The topic of the present doctoral dissertation is the analysis of the phonological and tonal structures of a previously largely undescribed language, namely Samue. It is a Gur language belonging to the Niger-Congo language phulym, which is spoken in Burkina Faso. The data were collected during the fieldwork period in a Sama village; the data include 1800 lexical items, thousands of elicited sentences and 30 oral texts. The data were first transcribed phonetically and then the phonological and tonal analyses were conducted. The results show that the phonological system of Samue with the phoneme inventory and phonological processes has the same characteristics as other related Gur languages, although some particularities were found, such as the voicing and lenition of stop consonants in medial positions. Tonal analysis revealed three level tones, which have both lexical and grammatical functions. A particularity of the tonal system is the regressive Mid tone spreading in the verb phrase. The theoretical framework used in the study is Optimality theory. Optimality theory is rarely used in the analysis of an entire language system, and thus an objective was to see whether the theory was applicable to this type of work. Within the tonal analysis especially, some language specific constraints had to be created, although the basic Optimality Theory principle is the universal nature of the constraints. These constraints define the well-formedness of the language structures and they are differently ranked in different languages. This study gives new insights about typological phenomena in Gur languages. It is also a fundamental starting point for the Samue language in relation to the establishment of an orthography. From the theoretical point of view, the study proves that Optimality theory is largely applicable in the analysis of an entire sound system.

Thick Section Laser Beam Welding of Structural Steels: Methods for Improving Welding Efficiency

Laser beam welding (LBW) is applicable for a wide range of industrial sectors and has a history of fifty years. However, it is considered an unusual method with applications typically limited to welding of thin sheet metal. With a new generation of high power lasers there has been a renewed interest in thick section LBW (also known as keyhole laser welding). There was a growing body of publications during 2001-2011 that indicates an increasing interest in laser welding for many industrial applications, and in last ten years, an increasing number of studies have examined the ways to increase the efficiency of the process. Expanding the thickness range and efficiency of LBW makes the process a possibility for industrial applications dealing with thick metal welding: shipbuilding, offshore structures, pipelines, power plants and other industries. The advantages provided by LBW, such as high process speed, high productivity, and low heat input, may revolutionize these industries and significantly reduce the process costs. The research to date has focused on either increasing the efficiency via optimizing process parameters, or on the process fundamentals, rather than on process and workpiece modifications. The argument of this thesis is that the efficiency of the laser beam process can be increased in a straightforward way in the workshop conditions. Throughout this dissertation, the term “efficiency” is used to refer to welding process efficiency, specifically, an increase in efficiency refers an increase in weld’s penetration depth without increasing laser power level or decreasing welding speed. These methods are: modifications of the workpiece – edge surface roughness and air gap between the joining plates; modification of the ambient conditions – local reduction of the pressure in the welding zone; modification of the welding process – preheating of the welding zone. Approaches to improve the efficiency are analyzed and compared both separately and combined. These experimentally proven methods confirm previous findings and contribute additional evidence which expand the opportunities for laser beam welding applications. The focus of this research was primarily on the effects of edge surface roughness preparation and pre-set air gap between the plates on weld quality and penetration depth. To date, there has been no reliable evidence that such modifications of the workpiece give a positive effect on the welding efficiency. Other methods were tested in combination with the two methods mentioned above. The most promising - combining with reduced pressure method - resulted in at least 100% increase in efficiency. The results of this thesis support the idea that joining those methods in one modified process will provide the modern engineering with a sufficient tool for many novel applications with potential benefits to a range of industries.