Knowledge and attitudes towards dietary fibers - romania vs other european countries

Aim: The aim of our study was to evaluate the Romanian’s knowledge and attitudes regarding dietary fibers compared with other European countries. Materials and methods: We made a cross-sectional survey (part of multinational project from CI&DETS Research Centre, Instituto Politecnico Viseu, Portugal, with reference PROJ/CI&DETS/2014/0001) based on a questionnaire applied in 2015, over 670 Romanian consumers, focused on the attitudes and knowledge towards ingestion of foods rich in fibers. We used the software SPSS for statistics. Results: Our results showed that the knowledge about dietary fibers and also the ingestion of food products rich in fibers were low. The female participants ate more whole grains and fruits than males and pay more attention to food labelling, the Romanian people prefer to stay and eat home than at restaurants especially in rural areas, and the knowledge about fiber’s benefits was significantly related to high education and urban location. Comparing to other European countries, Romania had the highest level of knowledge about dietary fibers definition followed by Portugal, Turkey and Hungary, but the lowest regarding the fibers importance for health after Macedonia, Turkey and Latvia. Conclusion: We sustain the needs for more efficient community interventions and proper information about the importance of dietary fibers for our health and also for the dissemination of the nutritional standards among Romanian population.

Students’ Involvement in School and Parental Support: Contributions to the Socio-Educational Intervention

Student involvement in the school and the perception of parental support are core variables in the context of studies on personal and school adjustment of children and adolescents and should be considered in the context of socio-educational intervention. In this study, we formulated the following objectives: i) to understand the differences in students’ involvement in school and the perception of parental support, according to several socio- demographic and school variables, ii) to analyse the relationship between involvement and the perception of parental support iii) to outline socio-educational intervention strategies in the contexts of children’s lives. This is a non-experimental, correlational and cross-sectional study by means of a non-probabilistic convenience sample consisting of 150 children, aged between 10 and 16 years, attending the 2nd and 3rd cycles basic education [5th – 9th years of schooling] attending a school in the central region of Portugal. The data collection instruments were “Students’ Engagement in School: a Four-Dimensional Scale – SES-4DS” (Veiga 2013, 2016), the “Perceived Parental Support Scale” (Veiga, 2011) and a part with socio-demographic and school questions was added. We found significant differences in overall (and partial) amounts of student involvement and the perception of parental support, depending on the age, gender (in agency and behaviour subscales), school difficulties/retentions and methods of study (time, a place to study and a study schedule). We also found positive and significant relationships between student involvement and perception of parental support. The results are in line with the scientific literature in the field, which highlights the key role of the variables, student involvement and perception of parental support in the academic and psychosocial adjustment of young people. These should be considered in the context of socio-educational intervention. Given the above, we present areas and action strategies promoting parent and student involvement in the educational process.

Romanian Knowledge and Attitudes regarding Dietary Fibers

Presently, the scientists recognize the health benefits of food fibers in the menu and also plant food sources are at high interest both for general population and food companies. The food companies are responsible for a clear nutrition labelling that will assist consumers to make informed and healthy choices and health providers has to inform the population about the benefits of fibers.The aim of our study was to evaluate the Romanian knowledge and attitudes regarding dietary fibers from food products. We made a qualitative survey based on a questionnaire applied in 2015, over a period of 6 months, over 670 Romanian consumers. It was focused on testing the attitudes and knowledge towards ingestion of foods rich in fibers. For all data analysis we used the software SPSS, from IBM Inc. Our results showed that the knowledge about dietary fibers and also the ingestion of food products rich in fibers were low, and most of the subjects didn’t have any interest to read the nutritional information from food labels. The female participants ate more whole grains and fruits than males and pay more attention to food labelling. Romanian people prefer to stay and eat home than at restaurants especially in rural areas, and the knowledge about fibers benefits was significantly related to education and urban location. We underline the needs for more efficient community interventions and proper information about the importance of dietary fibers for our health and also to improve and disseminate nutritional standards and diet recommendation among population.

Relevance of anatomy to medical education and clinical practice: perspectives of medical students, clinicians, and educators

Introduction: Against a backdrop of ever-changing diagnostic and treatment modalities, stakeholder perceptions (medical students, clinicians, anatomy educators) are crucial for the design of an anatomy curriculum which fulfils the criteria required for safe medical practice. This study compared perceptions of students, practising clinicians, and anatomy educators with respect to the relevance of anatomy education to medicine. Methods: A quantitative survey was administered to undergraduate entry (n = 352) and graduate entry students (n = 219) at two Irish medical schools, recently graduated Irish clinicians (n = 146), and anatomy educators based in Irish and British medical schools (n = 30). Areas addressed included the association of anatomy with medical education and clinical practice, mode of instruction, and curriculum duration. Results: Graduate-entry students were less likely to associate anatomy with the development of professionalism, teamwork skills, or improved awareness of ethics in medicine. Clinicians highlighted the challenge of tailoring anatomy education to increase student readiness to function effectively in a clinical role. Anatomy educators indicated dissatisfaction with the time available for anatomy within medical curricula, and were equivocal about whether curriculum content should be responsive to societal feedback. Conclusions: The group differences identified in the current study highlight areas and requirements which medical education curriculum developers should be sensitive to when designing anatomy courses.

Oral cancer incidence and survival rates in the Republic of Ireland, 1994-2009

Background: Oral cancer is a significant public health problem world-wide and exerts high economic, social, psychological, and physical burdens on patients, their families, and on their primary care providers. We set out to describe the changing trends in incidence and survival rates of oral cancer in Ireland between 1994 and 2009. Methods: National data on incident oral cancers [ICD 10 codes C01-C06] were obtained from the National Cancer Registry Ireland from 1994 to 2009. We estimated annual percentage change (APC) in oral cancer incidence during 1994–2009 using joinpoint regression software (version 4.2.0.2). The lifetime risk of oral cancer to age 79 was estimated using Irish incidence and population data from 2007 to 2009. Survival rates were also examined using Kaplan-Meier curves and Cox proportional hazard models to explore the influence of several demographic/lifestyle covariates with follow-up to end 2012. Results: Data were obtained on 2,147 oral cancer incident cases. Men accounted for two-thirds of oral cancer cases (n = 1,430). Annual rates in men decreased significantly during 1994–2001 (APC = -4.8 %, 95 % CI: −8.7 to −0.7) and then increased moderately (APC = 2.3 %, 95 % CI: −0.9 to 5.6). In contrast, annual incidence increased significantly in women throughout the study period (APC = 3.2 %, 95 % CI: 1.9 to 4.6). There was an elevated risk of death among oral cancer patients who were: older than 60 years of age; smokers; unemployed or retired; those living in the most deprived areas; and those whose tumour was sited in the base of the tongue. Being married and diagnosed in more recent years were associated with reduced risk of death. Conclusion: Oral cancer increased significantly in both sexes between 1999 and 2009 in Ireland. Our analyses demonstrate the influence of measured factors such as smoking, time of diagnosis and age on observed trends. Unmeasured factors such as alcohol use, HPV and dietary factors may also be contributing to increased trends. Several of these are modifiable risk factors which are crucial for informing public health policies, and thus more research is needed.

The issue of data protection and data security in the (pre-Lisbon) EU third pillar

The key functional operability in the pre-Lisbon PJCCM pillar of the EU is the exchange of intelligence and information amongst the law enforcement bodies of the EU. The twin issues of data protection and data security within what was the EU’s third pillar legal framework therefore come to the fore. With the Lisbon Treaty reform of the EU, and the increased role of the Commission in PJCCM policy areas, and the integration of the PJCCM provisions with what have traditionally been the pillar I activities of Frontex, the opportunity for streamlining the data protection and data security provisions of the law enforcement bodies of the post-Lisbon EU arises. This is recognised by the Commission in their drafting of an amending regulation for Frontex , when they say that they would prefer “to return to the question of personal data in the context of the overall strategy for information exchange to be presented later this year and also taking into account the reflection to be carried out on how to further develop cooperation between agencies in the justice and home affairs field as requested by the Stockholm programme.” The focus of the literature published on this topic, has for the most part, been on the data protection provisions in Pillar I, EC. While the focus of research has recently sifted to the previously Pillar III PJCCM provisions on data protection, a more focused analysis of the interlocking issues of data protection and data security needs to be made in the context of the law enforcement bodies, particularly with regard to those which were based in the pre-Lisbon third pillar. This paper will make a contribution to that debate, arguing that a review of both the data protection and security provision post-Lisbon is required, not only in order to reinforce individual rights, but also inter-agency operability in combating cross-border EU crime. The EC’s provisions on data protection, as enshrined by Directive 95/46/EC, do not apply to the legal frameworks covering developments within the third pillar of the EU. Even Council Framework Decision 2008/977/JHA, which is supposed to cover data protection provisions within PJCCM expressly states that its provisions do not apply to “Europol, Eurojust, the Schengen Information System (SIS)” or to the Customs Information System (CIS). In addition, the post Treaty of Prüm provisions covering the sharing of DNA profiles, dactyloscopic data and vehicle registration data pursuant to Council Decision 2008/615/JHA, are not to be covered by the provisions of the 2008 Framework Decision. As stated by Hijmans and Scirocco, the regime is “best defined as a patchwork of data protection regimes”, with “no legal framework which is stable and unequivocal, like Directive 95/46/EC in the First pillar”. Data security issues are also key to the sharing of data in organised crime or counterterrorism situations. This article will critically analyse the current legal framework for data protection and security within the third pillar of the EU.

Controlled surface nanotopography and oxygen plasma treatment of PEEK to improve cellular response

Poly(aryl-ether-ether-ketone) (PEEK) is a semi crystalline polymer which exhibits properties that make it an attractive choice for use as an implant material. It displays natural radiolucency, and MRI compatibility, as well as good chemical and sterilization resistance, both of which make it of particular interest in orthopaedic implants. However, PEEK has demonstrated poor cellular adhesion both in vitro and in vivo. This is problematic as implant surfaces that do not develop a layer of adhesive cells are at risk of undergoing fibrous encapsulation, which in turn leads to lack of a strong interface between the implant device and the patient tissue, which can in turn lead to failure of the implant and revision surgery . As incorporating nanotopography into a polymer surface has been demonstrated to be able to direct the differentiation behaviour of stem cells, a possible solution to PEEKs underlying issues with poor cellular response would be to incorporate specific nanoscale topography into the material surface through injection moulding, and then analysing if this is a viable method for addressing PEEKs issues with cellular response. In addition to nanoscale topography, the experimental PEEK surfaces were treated with oxygen plasma to address the underlying cytophobicity of the material. As this type of treatment has been documented to be capable of etching the PEEK surface, experiments were carried out to quantify the effect of this treatment, both on the ability of cells to adhere to the PEEK surface, as well as the effect it has upon the nanotopography present at the PEEK surface. The results demonstrated that there were a range of plasma treatments which would significantly improve the ability of cells to adhere to the PEEK surface without causing unacceptable damage to the nanotopography. Three different types of cells with osteogenic capacity were tested with the PEEK surfaces to gauge the ability of the topography to alter their behaviour: SAOS-2, osteoprogenitors and 271+ MSCs. Due to PEEKs material properties (it is non transparent, exhibits birefringence and is strongly autofluorescent) a number of histological techniques were used to investigate a number of different stages that take place in osteogenesis. The different cell types did display slightly different responses to the topographies. The SAOS-2 cells cultured on surfaces that had been plasma treated for 2 minutes at 200W had statistically significantly higher levels of von Kossa staining on the NSQ surface compared to the planar surface, and the same experiment employing alizarin red staining, showed a statistically significantly lower level of staining on the SQ surface compared to the planar surface. Using primary osteoprogenitor cells designed to look into if whether or not the presence of nanotopography effected the osteogenic response of these cells, we saw a lack of statistically significant difference produced by the surfaces investigated. By utilising HRP based immunostaining, we were able to investigate, in a quantitative fashion, the production of the two osteogenic markers osteopontin and osteocalcin by cells. When stained for osteocalcin, the SQ nanotopography had total percentage of the surface with stained material, average area and average perimeter all statistically significantly lower than the planar surface. For the cells that were stained for osteopontin, the SQ nanotopgraphy had a total percentage of the surface with stained material, average area and average perimeter all highly statistically significantly lower than those of the planar surface. Additionally, for this marker the NSQ nanotopography had average areas and average perimeters that were highly significantly higher than those of the planar surface. There were no significant differences for any of the values investigated for the 271+ MSC’s When plasma treatment was varied, the SAOS-2 cells demonstrated an overall trend i.e. increasing the energy of plasma treatment in turn leads to an increase in the overall percentage of staining. A similar experiment employing stem cells isolated from human bone marrow instead of SAOS-2 cells showed that for polycarbonate surfaces , used as a control, mineralization is statistically significantly higher on the NSQ nanopattern compared to the planar surface, whereas on the PEEK surfaces we observe the opposite trend i.e. the NSQ nanotopography having a statistically significantly lower amount of mineralization compared to the planar surface at the 200W 2min and 30W 1min plasma treatments. The standout trend from the PEEK results in this experiment was that the statistically significant differences on the PEEK substrates were clustered around the lower energy plasma treatments, which could suggest that the plasma treatment disrupted a function of the nanotopograhy which is why, as the energy increases, there are less statistically significant differences between the NSQ nanotopography and the Planar surface This thesis documents the response of a number of different types of cells to specific nanoscale topographies incorporated into the PEEK surface which had been treated with oxygen plasma. It outlines the development of a number of histological methods which measure different aspects of osteogenesis, and were selected to both work with PEEK, and produce quantitative results through the use of Cell Profiler. The methods that have been employed in this body of work would be of interest to other researchers working with this material, as well as those working with similarly autofluorescent materials.

New insight on the underdrawing of 16th Flemish-Portuguese easel paintings by combined surface analysis and microanalytical techniques

This paper focusses on the study of the underdrawings of 16th century easel paintings attributed to the workshop of the Portuguese-Flemish Master Frei Carlos. This investigation encompasses multidisciplinary research that relates the results of surface exams (infrared reflectography, standard light photography and infrared photography) with analytical investigations. The surface analysis of Frei Carlos’ underdrawings by infrared reflectography has shown heterogeneous work, revealing two different situations: (1) an abundant and expressive underdrawing, revealing a Flemish influence and (2) a simple and outlined underdrawing. This preliminary research raised an important question related to this Portuguese-Flemish workshop and to the analytical approach: Is the underdrawing's heterogeneity, as observed in the reflectograms, related to different artists or is this rather an effect that is produced due to the use of different materials in the underdrawing's execution? Consequently, if different materials were used, how can we have access to the hidden underdrawings? In order to understand the reasons for this dissemblance, chemical analysis of micro-samples collected in underdrawing areas and representing both situations were carried out by optical microscopy, micro Fourier transform infrared spectroscopy (μ-FTIR), scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM-EDX) and micro-Raman spectroscopy (μ-Raman). Taking into account the different possibilities and practical and theoretical limitations of surface and punctual examinations in the study of easel painting underdrawings, the methodology of research was adjusted, sometimes resulting in a re-analysis of experimental results. This research shows the importance of combining multispectral surface exams and chemical analysis in the understanding of the artistic creative processes of 16th century easel paintings.

Morphological and chemical characterization of tintypes and ambrotypes

The present work was done on two ambrotypes and two tintypes. It aimed evaluate their chemical and physical characteristics, especially their degradation patterns. Moreover, to understand the materials used for their production and cross-check analytical and historical information about the production processes. To do so multi-analytical, non-destructive methods were applied. Technical photography highlighted the surface morphology of the objects and showed the distribution of the protective coatings on their surfaces through UV radiation, which were very different between the four pieces. OM allowed for a detailed observation of the surfaces along with the selection of areas of interest to be analysed with SEM-EDS. SEM-EDS was the technique used most extensively and the one that provided the most insightful results: it allowed to observe the morphology of the image forming particles and the differences between highlights, dark areas and the interfaces between them. Also, elemental point analysis and elemental maps were used to identify the image forming particles as silver and to detect the presence of compounds related to the production, particularly gold used to highlight jewellery, iron as the red pigment and traces of the compounds used in the photographic process containing Ag, I, Na and S . Also, some degradation compounds were analysed containing Ag, Cu, S and Cl. With μ-FT-IR the presence of collodion was confirmed and the source of the protective varnishes was identified, particularly mastic and shellac, in either mixtures of the two or only one. μ-Raman detected the presence of metallic silver and silver chloride on the objects and identified one of the red pigments as Mars red. Finally, μ-XRD showed the presence of metallic silver and silver iodide on both ambrotypes and tintypes and hematite, magnetite and wuestite on the tintypes; RESUMO: O presente estudo foi desenvolvido sobre dois ambrótipos e dois ferrótipos. O propósito consiste em estudar as suas características químicas e físicas, dando particular ênfase aos padrões de degradação. Também é pretendido compreender os materiais usados na sua produção e relacionar esta informação analítca com dados históricos de manuais técnicos contemporâneos à produção dos objectos. Para tal foram utilizadas técnicas multi-analíticas e não destrutivas. O uso da fotografia técnica permitiu uma observação da morfologia das superficies dos objectos e da distribuição das camadas de verniz através da radiação UV, muito diferente entre os quatro. A microscopia óptica proporcionou uma observação detalhada das superfícies assim como a selecção de pontos de interesse para serem analisados com SEM-EDS. SEM-EDS foi a técnica usada mais extensivamente e a que proporcionou os resultados mais detalhados: observação da morofologia das partículas formadoras da imagem e as diferenças entre zonas de altas luzes, baixas luzes e as interfaces entre elas. A análise elemental e os mapas elementares foram usados para detectar prata nas partículas formadoras da imagem e a presença de compostos relacionados com a produção, em particular ouro utilizado para realçar joalharia, ferro no pigmento vermelho e vestígios de compostos utilizados no processo fotográfico incluindo Ag, I, Na e S. Do mesmo modo, alguns compostos de degradação foram analisados contendo Ag, Cu, S e Cl. Com μ-FT-IR a presença de colódio foi confirmada e identificada a origem dos vernizes, mástique e goma-laca, tanto em misturas dos dois como apenas um. Com μ-Raman foi detectada a presença de prata metálica e de cloreto de prata e identificado um dos pigmentos vermelhos como Mars red. Finalmente, μ-DRX revelou a presença de prata metálica e iodeto de prata tanto nos ambrótipos como nos ferrótipos e hematite, magnetite e wuestite nos ferrótipos.

Biotechnology and crop protection in Brazil.

The process of modernization of Brazilian agriculture aimed at increasing the productivity in response to the high demand for agricultural products in the world market and it was based on the intensive use of inputs such as agrochemicals, intense mechanisation and breeding of new varieties. Among these, pesticides were incorporated in almost all production systems. Over reliance on pesticide use has produced many negative effects on both biotic and abiotic components of the environment, generating chemical contamination of soil and water, decrease in biological diversity of agroecosystems, disruption of natural cycles, pest resistance, intoxication of growers, among others. The consumption of pesticides in Brazil was 151.8 thousand tonnes in 1989, and today the country is the fifth world market of these products. The use of pesticides increased from 16 thousand tonnes (a.i.) in 1964 to 60.2 thousand tonnes in 1991, while the area planted to crops grew from 28.4 to 50.0 million ha in the same period. This means an increase of 276.2% in consumption of pesticides compared to an increase of 76% in planted area. Even with this large increase in the use of pesticides, the losses caused by pests have not been significantly reduced, and the net gain in crop productivity has been low. On the other hand, problems with food contamination, environmental degradation of growers have considerably mounted. It is possible to define two classes of crops regarding intense use of pesticides. One is represented by those crops that occupy large areas, and therefore contribute to a large amont of pesticides used for pest control in a country basis. The other class comprises crops that require large amounts of pesticides per unit of area, but not necessarily represent large amounts of pesticides used coutry-wide. Based on the classes proposed, citrus, soybean and sugarcane stand as crops with a nationally great consumption of pesticides, while tomato, potato and citrus are important as intensive users of pesticides. In this paper the biotechnologies in use, the biotechnologies in advanced stages of development, the main constraints to the development and use of biotechnlology and the impact of pesticed on the environment are discussed.

Geographical distribution and conservation of Cucurbita in Brazil.

The collection and conservation of the Cucurbita genus in Brazil happened in so dispersed institutions, an assessment of the storage conditions and the genetic diversity is needed, making it possible to identify new priorities for the genus. This work constitutes diagnosis of geographical distribution, storage conditions in situ and ex situ and on genetic diversity of the Cucurbita genus in Brazil. Research was done in herbariums, databases, literature and in situ (expeditions to rural areas and (markets) to map the areas of occurrence of the species. During these expeditions, questionnaires were applied to obtain information about the property and genus Cucurbita. Questionnaires were sent to 173 Brazilian institutions regarding the preservation conditions ex situ. A genetic variability of the Cucurbita genus was found in traditional Brazilian agriculture. Collections must be prioritized in the northern and southern regions (all states); the southeastern region, all states, except Minas Gerais; central-west, in Mato Grosso do Sul and Mato Grosso; the northeastern region, the states of Alagoas, Maranhão, Paraíba, Pernambuco, Piauí and Sergipe. Currently 5.545 entries are being conserved in the Germplasm banks, however, C. pepo, C. ficifolia, C. argyrosperma and wild species are poorly represented. The characterization level of conserved entries is low in the ex situcollections. Participative research projects must be financed as a way to stimulate the farmers to continue planting their local varieties. A coleta e conservação do gênero Cucurbita no Brasil aconteceu de forma dispersa pelas instituições, sendo necessário um diagnóstico sobre as condições de conservação e sobre a diversidade genética, tornando possível identificar novas prioridades para o gênero. Este trabalho realizou diagnóstico sobre distribuição geográfica, condições de conservação in situ e ex situ e sobre diversidade genética do gênro Cucurbita no Brasil. Para mapear as áreas de ocorrência das espécies, foram realizados levantamentos de informações em herbários, banco de dados, literatura e levantamentos in situ (expedições para áreas rurais, feiras livres e CEASAs). Nessas expedições foram aplicados questionários, buscando informações sobre a propriedade e o gênero Cucurbita. Em relação as condições de conservação ex situ, foram enviados questionários para 173 instituições brasileiras. Foi constatado que existe variabilidade genética do gênero Cucurbita na agricultura tradicional brasileira. Devem ser priorizadas coletas nas regiões Norte e Sul (todos os estados); região Sudeste, todos os estados, exceto Minas Gerais; região Centro-Oeste, no Mato Grosso do Sul e Mato Grosso; região Nordeste, os estados de Alagoas, Maranhão, Paraíba, Pernambuco, Piauí e Sergipe. Atualmente estão sendo conservados nos Bancos de Germoplasma 5.545 acessos, no entanto C. pepo, C ficifolia, C. argyrosperma e espécies silvestres estão pouco representadas. É baixa a taxa de caracterização dos acessos conservados nas coleções ex situ. Devem ser financiados projetos de pesquisa participativa como uma forma de estimular e dar condições aos agricultores de continuarem cultivado suas variedades locais.

Geographical distribution and conservation of Cucurbita in Brazil.

The collection and conservation of the Cucurbita genus in Brazil happened in so dispersed institutions, an assessment of the storage conditions and the genetic diversity is needed, making it possible to identify new priorities for the genus. This work constitutes diagnosis of geographical distribution, storage conditions in situ and ex situ and on genetic diversity of the Cucurbita genus in Brazil. Research was done in herbariums, databases, literature and in situ (expeditions to rural areas and (markets) to map the areas of occurrence of the species. During these expeditions, questionnaires were applied to obtain information about the property and genus Cucurbita. Questionnaires were sent to 173 Brazilian institutions regarding the preservation conditions ex situ. A genetic variability of the Cucurbita genus was found in traditional Brazilian agriculture. Collections must be prioritized in the northern and southern regions (all states); the southeastern region, all states, except Minas Gerais; central-west, in Mato Grosso do Sul and Mato Grosso; the northeastern region, the states of Alagoas, Maranhão, Paraíba, Pernambuco, Piauí and Sergipe. Currently 5.545 entries are being conserved in the Germplasm banks, however, C. pepo, C. ficifolia, C. argyrosperma and wild species are poorly represented. The characterization level of conserved entries is low in the ex situcollections. Participative research projects must be financed as a way to stimulate the farmers to continue planting their local varieties. A coleta e conservação do gênero Cucurbita no Brasil aconteceu de forma dispersa pelas instituições, sendo necessário um diagnóstico sobre as condições de conservação e sobre a diversidade genética, tornando possível identificar novas prioridades para o gênero. Este trabalho realizou diagnóstico sobre distribuição geográfica, condições de conservação in situ e ex situ e sobre diversidade genética do gênro Cucurbita no Brasil. Para mapear as áreas de ocorrência das espécies, foram realizados levantamentos de informações em herbários, banco de dados, literatura e levantamentos in situ (expedições para áreas rurais, feiras livres e CEASAs). Nessas expedições foram aplicados questionários, buscando informações sobre a propriedade e o gênero Cucurbita. Em relação as condições de conservação ex situ, foram enviados questionários para 173 instituições brasileiras. Foi constatado que existe variabilidade genética do gênero Cucurbita na agricultura tradicional brasileira. Devem ser priorizadas coletas nas regiões Norte e Sul (todos os estados); região Sudeste, todos os estados, exceto Minas Gerais; região Centro-Oeste, no Mato Grosso do Sul e Mato Grosso; região Nordeste, os estados de Alagoas, Maranhão, Paraíba, Pernambuco, Piauí e Sergipe. Atualmente estão sendo conservados nos Bancos de Germoplasma 5.545 acessos, no entanto C. pepo, C ficifolia, C. argyrosperma e espécies silvestres estão pouco representadas. É baixa a taxa de caracterização dos acessos conservados nas coleções ex situ. Devem ser financiados projetos de pesquisa participativa como uma forma de estimular e dar condições aos agricultores de continuarem cultivado suas variedades locais.

Genetic structure and mating type analysis of the Pyricularia oryzae population causing widespread epidemics in southern Brazil.

Blast is a major disease of rice in Brazil, the largest rice-producing country outside Asia. This study aimed to assess the genetic structure and mating-type frequency in a contemporary Pyricularia oryzae population, which caused widespread epidemics during the 2012/13 season in the Brazilian lowland subtropical region. Symptomatic leaves and panicles were sampled at flooded rice fields in the states of Rio Grande do Sul (RS, 34 fields) and Santa Catarina (SC, 21 fields). The polymorphism at ten simple sequence repeats (SSR or microsatellite) loci and the presence of MAT1-1 or MAT1-2 idiomorphs were assessed in a population comprised of 187 isolates. Only the MAT1-2 idiomorph was found and 162 genotypes were identified by the SSR analysis. A discriminant analysis of principal components (DAPC) of SSR data resolved four genetic groups, which were strongly associated with the cultivar of origin of the isolates. There was high level of genotypic diversity and moderate level of gene diversity regardless whether isolates were grouped in subpopulations based on geographic region, cultivar host or cultivar within region. While regional subpopulations were weakly differentiated, high genetic differentiation was found among subpopulations comprised of isolates from different cultivars. The data suggest that the rice blast pathogen population in southern Brazil is comprised of clonal lineages that are adapting to specific cultivar hosts. Farmers should avoid the use of susceptible cultivars over large areas and breeders should focus at enlarging the genetic basis of new cultivars.

Mapping spatial and temporal potassium balances in Brazilian soils of south-west Goias.

Introduction: Brazil, is one of the main agricultural producers in the world ranking 1st in the production of sugarcane, coffee and oranges. It is also 2nd as world producer of soybeans and a leader in the harvested yields of many other crops. The annual consumption of mineral fertilizers exceeds 20 million mt, 30% of which corresponds to potash fertilizers (ANDA, 2006). From this statistic it may be supposed that fertilizer application in Brazil is rather high, compared with many other countries. However, even if it is assumed that only one fourth of this enormous 8.5 million km2 territory is used for agriculture, average levels of fertilizer application per hectare of arable land are not high enough for sustainable production. One of the major constraints is the relatively low natural fertility status of the soils which contain excessive Fe and Al oxides. Agriculture is also often practised on sandy soils so that the heavy rainfall causes large losses of nutrients through leaching. In general, nutrient removal by crops such as sugarcane and tropical fruits is much more than the average nutrient application via fertilization, especially in regions with a long history of agricultural production. In the recently developed areas, especially in the Cerrado (Brazilian savanna) where agriculture has expanded since 1980, soils are even poorer than in the "old" agricultural regions, and high costs of mineral fertilizers have become a significant input factor in determining soybean, maize and cotton planting. The consumption of mineral fertilizers throughout Brazil is very uneven. According to the 1995/96 Agricultural Census, only in eight of the total of 26 Brazilian states, were 50 per cent or more of the farms treated "systematically" with mineral fertilizers; in many states it was less than 25 per cent, and in five states even less than 12 per cent (Brazilian Institute for Geography and Statistics; Censo Agropecuario1995/96, Instituto Brazileiro de Geografia e Estadistica; IBGE, www.ibge.gov.br). The geographical application distribution pattern of mineral fertilizers may be considered as an important field of research. Understanding geographical disparities in fertilization level requires a complex approach. This includes evaluation of the availability of nutrients in the soil (and related soil properties e.g. CEC and texture), the input of nutrients with fertilizer application, and the removal of nutrients by harvested yields. When all these data are compiled, it is possible to evaluate the balance of particular nutrients for certain areas, and make conclusions as to where agricultural practices should be optimized. This kind of research is somewhat complicated, because it relies on completely different sources of data, usually from incomparable data sources, e.g. soil characteristics attributed to soil type areas, in contrast to yields by administrative regions, or farms. A priority tool in this case is the Geographical Information System (GIS), which enables attribution of data from different fields to the same territorial units, and makes possible integration of these data in an "inputoutput" model, where "input" is the natural availability of a nutrient in the soil plus fertilization, and "output" export of the same nutrient with the removed harvested yield.

Essays in Economic Geography and Long-Term Development

This dissertation has two main themes: first, the economic impact of tourism on cities and, secondly, the determinants of European long-run development, with a focus on the pre-Industrial era. The common thread is the attempt to develop economic geography models that incorporate spatial frictions and are liable to be given empirical content. Chapter 1, written in conjunction with G. Alfredo Minerva, provides an empirical analysis of the relationship between tourism and economic activity across Italian municipalities, and lays down the basic elements of an urban theory of tourism in an a-spatial setting. Chapter 2 extends these ideas to a quantitative urban framework to study the economic impact and the welfare consequences of tourism into the city of Venice. The model is given empirical content thanks to a large collection of data at the Census tract level for the Municipality of Venice, and then used to perform counterfactual policty analysis. In chapter 3, with Matteo Santacesaria, we consider a setting where agents are continuously distributed over a two-dimensional heterogeneous geography, and are allowed to do business at a finite set of markets. We study the equilibrium partition of the economic space into a collection of mutually-exclusive market areas, and provide condition for this equilibrium partition to exist and to be unique. Finally, chapter 4 "The rise of (urban) Europe: a Quantitative-Spatial analysis", co-authored with Matteo Cervellati and Alex Lehner, sets up a quantitative economic geography model to understand the roots of the Industrial Revolution, in an attempt to match the evolution of the European urban network, and the corresponding city-size distribution, over the period A.D. 1000-1850. It highlights the importance of agricultural trade across cities for the emergence of large manufacturing hubs.