Multi-level virtual ring : an architecture for content routing in wireless sensor network

Two main problems prevent the deployment of content delivery in a wireless sensor network: the address, which is widely used in the Internet as the identifier, is meaningless in wireless network, and the routing efficiency is a big concern in wireless sensor network. This paper presents an embedded multi-level ring (MVR) structure to address those two problems. The MVR uses names rather than addresses to identify sensor nodes. The MVR routes packets on the name identifiers without being aware the location. Some sensor nodes are selected as the backbone nodes and are placed on the different levels of the virtual rings. MVR hashes nodes and contents identifiers, and stores them at the backbone nodes. MVR takes the cross-level routing to improve the routing efficiency. Further, MVR is constructed decentralized and runs on the mobile nodes themselves, requiring no central control. Experiments using ns2 simulator for up to 200 nodes show that the storage and bandwidth requirements of MVR grow slowly with the size of the network. Furthermore, MVR has demonstrated as self-administrating, fault-tolerant, and resilient under the different workloads. We also discuss alternative implementation options, and future work.

Service-oriented wireless sensor networks and an energy-aware mesh routing algorithm

Service-oriented wireless sensor networks (WSNs) are being paid more and more attention because service computing can hide complexity of WSNs and enables simple and transparent access to individual sensor nodes. Existing WSNs mainly use IEEE 802.15.4 as their communication specification, however, this protocol suite cannot support IP-based routing and service-oriented access because it only specifies a set of physical- and MAC-layer protocols. For inosculating WSNs with IP networks, IEEE proposed a 6LoWPAN (IPv6 over LoW Power wireless Area Networks) as the adaptation layer between IP and MAC layers. However, it is still a challenging task how to discover and manage sensor resources, guarantee the security of WSNs and route messages over resource-restricted sensor nodes. This paper is set to address such three key issues. Firstly, we propose a service-oriented WSN architectural model based on 6LoWPAN and design a lightweight service middleware SOWAM (service-oriented WSN architecture middleware), where each sensor node provides a collection of services and is managed by our SOWAM. Secondly, we develop a security mechanism for the authentication and secure connection among users and sensor nodes. Finally, we propose an energyaware mesh routing protocol (EAMR) for message transmission in a WSN with multiple mobile sinks, aiming at prolonging the lifetime of WSNs as long as possible. In our EAMR, sensor nodes with the residual energy lower than a threshold do not forward messages for other nodes until the threshold is leveled down. As a result, the energy consumption is evened over sensor nodes significantly. The experimental results demonstrate the feasibility of our service-oriented approach and lightweight middleware SOWAM, as well as the effectiveness of our routing algorithm EAMR.

Wireless haptic rendering for mobile platforms

Computer haptics has so far been performed on a personal computer (PC). Off the shelf haptic devices provide only PC interfaces and software drivers for control and communication. The new wave of high capable tablet PCs and high end smart phones introduced new platforms for haptic applications. The major problem was to communicate wirelessly to provide user convenience and support mobility which is an essential feature for these platforms. In this paper we provide a wireless layered communication protocol and a hardware setup that enables off the shelf haptic devices to communicate wirelessly with a mobile device. The layers in the protocol enable the change of any hardware components without affecting the data flow. However, the adoption of the wireless interface instead of the wired one comes with the price of speed. Haptic refresh loops require a relatively high refresh rate of 1000 Hz compared to graphics loop which require between 30 and 60 only. An interpolation algorithm was demonstrated to compensate the latency and secure a stable user experience. The introduced setup was tested against portable environments and the users could perform similar functionalities to what are available on a wired setup to a PC.

Simulation of a novel piezoelectric energy harvester

This paper focuses on a novel piezoelectric energy harvester for nanofiber PVDF to capture energy from vibration environment. A Resembling CMOS(R-CMOS) circuit consisting of two pMOS transistors and two nMOS transistors is presented, which can greatly increase the energy efficiency and reduce the power dissipation tremendously. Meanwhile, the novel harvester supplies smooth direct current. Simulation result of MULTISIM has shown that by using this novel piezoelectric energy harvester the input voltage (5v) can be rectified to be an output voltage (4.24v). The voltage conversion rate of the novel harvester is as high as 84.8% which is much larger than the rate of traditional rectifier circuit. Its potential application is in micro sensors, wireless transducers, and sensor networks.

Hierarchical workflow management in wireless sensor network

To build the service-oriented applications in a wireless sensor network (WSN), the workflow can be utilized to compose a set of atomic services and execute the corresponding pre-designed processes. In general, WSN applications rely closely on the sensor data which are usually inaccurate or even incomplete in the resource-constrained WSN. Then, the erroneous sensor data will affect the execution of atomic services and furthermore the workflows, which form an important part in the bottom-to-up dynamics of WSN applications. In order to alleviate this issue, it is necessary to manage the workflow hierarchically. However, the hierarchical workflow management remains an open and challenging problem. In this paper, by adopting the Bloom filter as an effective connection between the sensor node layer and the upper application layer, a hierarchical workflow management approach is proposed to ensure the QoS of workflow-based WSN application . The case study and experimental evaluations demonstrate the capability of the proposed approach.

Emerging wireless personal area networks(WPANs) : - An analysis of techniques, tools and threats

Wireless Personal Area Networks provide a pivotal role in local area network technology complementing traditional Wireless Local Area Network technologies. Bluetooth, ZigBee and NFC (Near Field Communications) have emerged as key WPAN technologies with UWB (Ultra Wide Band) standards currently evolving. They are however subject to the usual range of security vulnerabilities found in wireless LANs such as spoofing, snooping, man-in-the-middle, denial of service and other attacks. However security in WPANs is not as mature as it is in Wireless LANs and further work is needed in order to provide comparable protection. This paper examines a range of WPAN technologies and security issues and proposes protection mechanisms that can mitigate risk in each case. © 2012 IEEE.

Fuzzy logic optimized wireless sensor network routing protocol

Wireless sensor networks (WSNs) are used in health monitoring, tracking and security applications. Such networks transfer data from specific areas to a nominated destination. In the network, each sensor node acts as a routing element for other sensor nodes during the transmission of data. This can increase energy consumption of the sensor node. In this paper, we propose a routing protocol for improving network lifetime and performance. The proposed protocol uses type-2 fuzzy logic to minimize the effects of uncertainty produced by the environmental noise. Simulation results show that the proposed protocol performs better than a recently developed routing protocol in terms of extending network lifetime and saving energy and also reducing data packet lost.

Design and analysis of an antenna for wireless energy harvesting in head-mountable DBS device

This paper presents design and simulation of a circular meander dipole antenna at the industrial, scientific, and medical band of 915 MHz for energy scavenging in a passive head-mountable deep brain stimulation device. The interaction of the proposed antenna with a rat body is modeled and discussed. In the antenna, the radiating layer is meandered, and a FR-4 substrate is used to limit the radius and height of the antenna to 14 mm and 1.60 mm, respectively. The resonance frequency of the designed antenna is 915 MHz and the bandwidth of 15 MHz at a return loss of -10 dB in free space. To model the interaction of the antenna with a rat body, two aspects including functional and biological are considered. The functional aspect includes input impedance, resonance frequency, gain pattern, radiation efficiency of the antenna, and the biological aspect involves electric field distribution, and SAR value. A complete rat model is used in the finite difference time domain based EM simulation software XFdtd. The simulated results demonstrate that the specific absorption rate distributions occur within the skull in the rat model, and their values are higher than the standard regulated values for the antenna receiving power of 1W.

Design and analysis of efficient rectifiers for wireless power harvesting in DBS devices

This paper presents an analysis of optimum rectifier circuits for wireless energy harvesting in deep brain stimulation (DBS) devices. Since DBS demands compact and low power consumption devices, small, high conversion efficient, and high output voltage rectifiers need to be developed. The investigation that is presented in this paper is analytical and simulated based. Analysis on a variety of circuit configurations brings more evidence to improve the performance of rectifiers. Analytical parameters influencing the output DC voltage and the efficiency of the rectifiers are described. The operating frequency of the 915 MHz industrial, scientific and medical (ISM) radio band is used in this study. The maximum conversion efficiency of the LC matched half wave rectifier, the Greinacher voltage doubler, the Delon doubler, and the 2-stage voltage multiplier is obtained as 56.34%, 74.45%, 71.48%, and 31.44%, respectively, at the 30 dBm input power level. The corresponding maximum output DC voltages are 6.27 V, 16.83 V, 13.36 V, and 9.20 V. Thus the Greinacher voltage doubler is deemed as the best configuration according to the conversion efficiency and the output voltage measurements.