Method for determining erosion resistance of fibre-insulating materials

A method was developed for the estimation of the erosive wear of fiber-insulating materials. The wear increases with increasing impact velocity of the particles, increasing impact angle, particle size and the thermal ageing of the fibre elements. Through CFD simulation of the particle-containing gas flow, the erosion depth can be predicted.

Growth of Skipjack Katsuwonus pelamis from Mozambique

Growth of skipjack, Katsuwonus pelamis in Mozambican waters was studied, using fork length data collected in 1983-1985, during an experimental pole-and-line/live-bait fishing program. Tentative estimates of growth parameters are FL���=80 cm, K=0.6 yearˉ¹. Some evidence for seasonal growth is presented, along with a discussion of the limitations of the data set used in the investigation.

Reynolds number influence on turbulent blocking effects of a rigid plane boundary (3rd report, direct numerical simulation on wall blocking effects for anisotropic turbulence)

The Reynolds number influence on turbulent blocking effects by a rigid plane boundary is studied using direct numerical simulation (DNS). A new forcing method proposed in the second report using Townsend's "simple model eddies" for DNS was extended to generate axisymmetric anisotropic turbulence. A force field is obtained in real space by sprinkling many space-filling "simple model eddies" whose centers are randomly but uniformly distributed in space. The axes of rotation are controlled in this study to generate axisymmetric anisotropic turbulence. The method is applied to a shear-free turbulent boundary layer over a rigid plane boundary and the blocking effects for anisotropic turbulence are investigated. The results show that stationary axisymmetric anisotropic turbulence is generated using the present method. Turbulence intensities near the wall showed good agreements with the rapid distortion theory (RDT) for small t (t ≪ TL), where TL. is the eddy turnover time. The splat effect (i. e. turbulence intensities of the components parallel to the surface are amplified) occurs near the boundary and the viscous effect attenuates the splat effect at the quasi steady state at low Reynolds number as for Isotropic turbulence. Prandtl's secondary flow of the second kind does not occur for low Reynolds number flows, which qualitatively agrees with previous observetion in a mixing-box.

The oxidation of CH2O in the intermediate temperature range (943-995 K)

New atmospheric pressure flow reactor data on the oxidation of formaldehyde in the temperature range 943-995 K and over equivalence ratios from 0.013 to 36.7 are reported and discussed. A detailed mechanism assembled from previously published results produced acceptable agreement with the experimental data for the fuel-lean conditions, but failed to predict results for oxidative pyrolysis. Analysis or the very fuel-lean conditions, but failed to modelling results are principally sensitive to CH2O+HO2→HCO+H2O2 (6) and H2O2 +M→OH+OH+M (33). Whereas the specific rate of each reaction cannot be independently determined, it is found that the product k33.k6 is a well defined function of temperature: (3.4±3.0).1028 exp(-(26,800±400)/T). Inadequacies in the mechanism which may be responsible for the disagreement under fuel-rich conditions are discussed. © 1991 Combustion Institute.

A novel measurement of dynamic friction

A tribometer, based on a pin-on-disc machine, uses a PZT drive to produce small sinusoidal fluctuations of sliding speed. The frequency and amplitude of these fluctuations can be controlled, and the dynamic response measured. Preliminary test results show that the dynamic friction variation is influenced by the contact materials, normal force, oscillation frequency and steady sliding speed. The variation of friction force amplitude and phase with frequency gives clues about the underlying state variables determining the friction. Modelling studies illustrate the expected behaviour for idealized friction laws governed by, for example, sliding speed, contact temperature, and "rate-state" laws. © 2008 SAE International.

Biological characteristics and determination of population dynamics parameters of Nemipterus japonicus in the coastal waters of Province Bushehr, Persian Gulf

This study was conducted to determine biological characteristics and population dynamics parameters of threadfin bream (Nemipterus japonicus) in Persian Gulf (Bushehr Province), during November 2006 and October 2007. The minimum and maximum specimens were 75-273 mm FL and their weight was 7.6 - 351.9 g. Based on the exponential relationship between fork length and weight, slope (b) for individuals, males and females was 2.987321, 2.992546 and 3.007314, respectively. The emptiness value (V) was 45.6% and it shows that N. japonicus is a moderate feeder. The results of Fp indicates that crustacean with 78.2% are main foods, mollusca (27.7%), fishes (20.7%), polychaeta (19.2%) and Foraminifera (11.7%) were identified as minor foods and phytoplanktons (9.9%), nematoda(8.0%), echinodermata (2.3%) and sea weeds (0.3%) were random foods. The reproduction studies showed the spawning season extended within 2 peaks, from April- May and September and main spawning occurs in spring season.The mean absolute and relative fecundities were 472388±42633 and 3817±293 (X±SE), respectively. The maximum, minimum and mean of oocyte diameter were 0.448, 0.022 and 0.221mm (SE=0.071), respectively.The fork length at 50% maturity estimated to be 20.25 cm for females. The growth coefficient (K) , length infinity (L∞ ) and ɸ' was estimated 0.42/yr , 34.17 cm and 2.69, respectively. The coefficient of total mortality, fishing mortality, natural mortality and E was 1.37, 0.43, 0.94 and 0.31, respectively.

The study of biological characteristics and determination of population dynamic parameters of sawtooth barracuda (Sphyraena putnamae) in the Persian Gulf (Hormozgun Province waters)

The biological characteristics and population dynamisms of Sphyraena putnamae, were studied in the northern Persian Gulf and Oman Sea restricted to Hormuzgan province waters within 13 months period, from November 2006 up to November 2007. Biometrical and anatomical measurements were carried out, and biological surveys were conducted on 486 specimens. On the other hand, the growth and mortality parameters were estimated by using 3096 samples. These samples were collected from 3 landings, namely Bandar Abbas, Bandar Lengeh and Bandar Jask. The measurements of the minimum and maximum Fork lengths and weights were 11.7 to 8.03 cm and 135.0 to 4140.0 g, respectively. The results indicated that this species, having the Relative Length of Gut, RLG=0.34±0.002, is strongly carnivorous (often fish-eater), proven by the fact that more than 98% of its stomach contents were fish pieces. Examining the changes in the index of stomach emptiness by the percentage of CV = 0.47% indicates that this fish is Moderate feeder. The level of feeding increased in March, before spawning and decreased in June and September, simultaneously with the spawning season. There are 2 peaks of reproduction or spawning seasons during the months of April-May and September, of which the prior is assumed as the main spawning. The sex ratio (M:F) was calculated 0.5:1.0(X2 =2.11), which did not show a significant difference with expected level of 1:1 (P>0.05). The average absolute and relative reproduction rates of Sphyraena putnamae is respectively as follows: 1866827.1±255448.9 and 1097.7±94.3. The highest and the lowest diameter of matured egg are from 200 to 750 μ, and its average diameter is 402.10 ± 0.190 μ. A parameter for Saw-tooth barracuda length measurement, Lm50, based on the Fork-length, was calculated as 54.01 cm. In other words, as far as the fisheries management is concerned, the fish whose lengths are less than 54.01 cm should not be caught. The calculated level of (R2) (correlations of total length & weight), indicated strong correlations between length and weight of this fish, and the obtained formula included W =0.007100 FL 2.9295 and reinforced this assumption. The “K” Index for this fish in 3 above mentioned landings (Jask, Bandar-Abbas and Bandar-Length) were 1.24, 0.37 and 0.46 per year, respectively and the FL index for the same landings were estimated as 129, 110 and 134 cm, respectively. The growth coefficient (MONRO) for the above mentioned regions were calculated as 3.601, 3.647 and 3.917, respectively; and in the surveyed regions there were no significant differences in populations. The Total mortality coefficient (Z) was calculated 0.76, 1.12 and 1.07 per year, the Natural mortality coefficient was 0.46, 0.63 and 0.70, and the Fishing mortality coefficient (rate) (F) was found to be 0.30, 0.49 and 0.37 per year. The value of the exploitation rate (E) is equal to 0.39 per year, indicating that this species is an under-exploited resource, and there is no excessive fishing pressure on the fish supply of this species in the afore-said regions. The highest level of exploitation was found for ‘Bandar Abbas’ fishing region and the lowest level of exploitation is in ‘Bandar Lengeh’ waters.

Preliminary estimates of cetacean abundance in the northern Gulf of Mexico, and of selected cetacean species in the U.S. Atlantic Exclusive Economic Zone from vessel surveys

The Southeast Fisheries Science Center (SEFSC) initiated annual, vessel-based visual sampling surveys of northern Gulf of Mexico marine mammals in 1990 and conducted a similar survey in U.S. Atlantic Exclusive Economic Zone (EEZ) waters from Miami, Florida, to Cape Hatteras, North Carolina, in 1992. The primary goal of these surveys was to meet Marine Mammal Protection Act requirements for estimating abundance and monitoring trends of marine mammal stocks in United States waters. The surveys were designed to collect: 1) marine mammal sighting data to estimate abundance and to determine distribution and diversity; and 2) environmental data to evaluate factors which may affect the distribution, abundance and diversity of marine mammals. The preliminary analyses for abundance estimation from the 1990-1993 surveys are presented in this report.

Estimates of cetacean abundance in the northern Gulf of Mexico from vessel surveys

The Southeast Fisheries Science Center (SEFSC) initiated annual, vessel-based visual sampling surveys of northern Gulf of Mexico marine mammals in 1990. The primary goal of these surveys was to meet Marine Mammal Protection Act requirements for estimating abundance and monitoring trends of marine mammal stocks in United States waters. The surveys were designed to collect: 1) marine mammal sighting data to estimate abundance and to determine distribution and diversity; and 2) environmental data to evaluate factors which may affect the distribution, abundance and diversity of marine mammals. The analyses for abundance estimation from the 1991-1994 surveys are presented in this report.

Morphometrics, length-weight relationship and condition of Rastrineobola argentea (Pellegrin 1904) in the Winam Gulf of Lake Victoria (Kenya)

Correlation between total length (TL), fork length (FL) and standard length (SL) of Raslrineobola argentea (pellegrin 1904) in the Winam Gulf of Lake Victoria indicate that FL = 0.92 TL - 0.74 and SL = 0.90 TL - 1.74. Length-weight relationship of log-transformed data shows that the slopes of the regression lines were 3.06 to 3.22 for juveniles, 2.70 to 3.05 for males and 3.24 to 3.71 for females. The slopes were significantly different between groups at at a =0.05. The Fulton's condition factor (K) was highest in December (1.019-1.073) and March/April (1.015-1.030) but lowest in June (1:00-1.025) for all stations. Significant differences between groups demands for the use of different growth models for juveniles, males and females especially for the von Bertalanffy growth equation which uses length-weight relationship. Observed cyclic viations in condition factor suggests two peak breeding seasons for this species in the Winam Gulf. The practical lmplications of these results in stock assessment using length-based fish stock assessment methods is briefly discussed.

Model Refinement for the Active Control of Thermoacoustic Instability

Active control has been shown as a feasible technology for suppressing thermoacoustic instability in continuous combustion systems, and the control strategy design is substantially dependent on the reliability of the flame model. In this paper, refinement of G-equation flame model for the dynamics of lean premixed combustion is investigated. Precisely, the dynamics between the flame speed S_u and equivalence ratio phi are proposed based on numerical calculations and physical explanations. Finally, the developed model is tested on one set of experimental data.

Comparison of Camera Motion Estimation Methods for 3D Reconstruction of Infrastructure

Camera motion estimation is one of the most significant steps for structure-from-motion (SFM) with a monocular camera. The normalized 8-point, the 7-point, and the 5-point algorithms are normally adopted to perform the estimation, each of which has distinct performance characteristics. Given unique needs and challenges associated to civil infrastructure SFM scenarios, selection of the proper algorithm directly impacts the structure reconstruction results. In this paper, a comparison study of the aforementioned algorithms is conducted to identify the most suitable algorithm, in terms of accuracy and reliability, for reconstructing civil infrastructure. The free variables tested are baseline, depth, and motion. A concrete girder bridge was selected as the "test-bed" to reconstruct using an off-the-shelf camera capturing imagery from all possible positions that maximally the bridge's features and geometry. The feature points in the images were extracted and matched via the SURF descriptor. Finally, camera motions are estimated based on the corresponding image points by applying the aforementioned algorithms, and the results evaluated.